APTMC120AM55CT1AG
APTMC120AM55CT1AG – Rev 1 June, 2013
www.microsemi.com 1
6
Pins 1/2 ; 3/4 ; 5/6 must be shorted together
All ratings @ Tj = 25°C unless otherwise specified
1. SiC MOSFET characteristics (Per MOSFET)
Absolute maximum ratings
These Devices are sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.
See application note APT0502 on www.microsemi.com
Symbol Parameter Max ratings Unit
VDSS Drain - Source Breakdown Voltage 1200 V
ID Continuous Drain Current Tc = 25°C 55
A
Tc = 80°C 42
IDM Pulsed Drain current 110
VGS Gate - Source Voltage -10/+25 V
RDSon Drain - Source ON Resistance 49 mΩ
PD Maximum Power Dissipation Tc = 25°C 250 W
Application
Welding converters
Switched Mode Power Supplies
Uninterruptible Power Supplies
Motor control
Features
SiC Power MOSFET
- Low RDS(on)
- High temperature performance
SiC Schottky Diode
- Zero reverse recovery
- Zero forward recovery
- Temperature Independent switching behavior
- Positive temperature coefficient on VF
Very low stray inductance
Internal thermistor for temperature monitoring
High level of integration
AlN substrate for improved thermal performance
Benefits
Outstanding performance at high frequency operation
Direct mounting to heatsink (isolated package)
Low junction to case thermal resistance
Solderable terminals both for power and signal for
easy PCB mounting
Low profile
RoHS Compliant
Phase leg
S
iC MOSFET Power Modul
e
VDSS = 1200V
RDSon = 49mΩ max @ Tj = 25°C
ID = 55A @ Tc = 25°C
APTMC120AM55CT1AG
APTMC120AM55CT1AG – Rev 1 June, 2013
www.microsemi.com 2
6
Electrical Characteristics
Symbol Characteristic Test Conditions Min Typ Max Unit
IDSS Zero Gate Voltage Drain Current VGS = 0V ; VDS = 1200V 25 200 µA
RDS(on) Drain – Source on Resistance VGS = 20V
ID = 40A
T
j
= 25°C 40 49 mΩ
Tj = 150°C 75 104
VGS
(
th
)
Gate Threshold Voltage VGS = VDS, ID = 2mA 1.7 2.2 V
IGSS Gate – Source Leakage Current VGS = 20 V, VDS = 0V 500 nA
Dynamic Characteristics
Symbol Characteristic Test Conditions Min Typ Max Unit
Ciss Input Capacitance VGS = 0V
VDS = 1000V
f = 1MHz
1900
pF Coss Output Capacitance 160
Crss Reverse Transfer Capacitance 13
Qg Total gate Charge VGS= 20V
VBus = 800V
ID = 40A
98
nC
Qgs Gate – Source Charge 22
Qgd Gate – Drain Charge 36
Td(on) Turn-on Delay Time VGS = -5/+20V
VBus = 800V
ID = 40A
RL = 20 ; RG = 25Ω
12
ns
Tr Rise Time 14
Td(off) Turn-off Delay Time 23
Tf Fall Time 18
Eon Turn on Energy Inductive Switching
VGS = -5/+20V
VBus = 600V
ID = 40A
RG = 25Ω
Tj = 150°C 0.9 mJ
Eoff Turn off Energy Tj = 150°C 0.5 mJ
RthJC Junction to Case Thermal Resistance 0.5 °C/W
2. SiC diode characteristics (Per SiC diode)
SiC diode ratings and characteristics
Symbol Characteristic Test Conditions Min Typ Max Unit
VRRM Maximum Peak Repetitive Reverse Voltage 1200 V
IRM Maximum Reverse Leakage Current VR=1200V Tj = 25°C 64 400 µA
Tj = 175°C 112 2000
IF DC Forward Current Tc = 125°C 20 A
VF Diode Forward Voltage IF = 20A T
j
= 25°C 1.6 1.8 V
T
j
= 175°C 2.3 3
QC Total Capacitive Charge IF = 20A, VR = 120V
di/dt = 1000A/µs 160 nC
C Total Capacitance f = 1MHz, VR = 200V 192 pF
f = 1MHz, VR = 400V 138
RthJC Junction to Case Thermal Resistance 0.8 °C/W
APTMC120AM55CT1AG
APTMC120AM55CT1AG – Rev 1 June, 2013
www.microsemi.com 3
6
3. Thermal and package characteristics
Package characteristics
Symbol Characteristic Min Typ Max Unit
VISOL RMS Isolation Voltage, any terminal to case t =1 min, 50/60Hz 4000 V
TJ Operating junction temperature range SiC MOSFET -40 150
°C
SiC diode -40 175
TJOP Recommended junction temperature under switching conditions -40 TJmax
-25
TSTG Storage Temperature Range -40 125
TC Operating Case Temperature -40 125
Torque Mounting torque To heatsink M4 2 3 N.m
Wt Package Weight 80 g
Temperature sensor NTC (see application note APT0406 on www.microsemi.com).
Symbol Characteristic Min Typ Max Unit
R25 Resistance @ 25°C 50 kΩ
R25/R25 5 %
B25/85 T
25 = 298.15 K 3952 K
B/B TC=100°C 4
%
=
TT
B
R
RT
11
exp
25
85/25
25
SP1 Package outline (dimensions in mm)
See application note 1904 - Mounting Instructions for SP1 Power Modules on www.microsemi.com
T: Thermistor temperature
RT: Thermistor value at T
APTMC120AM55CT1AG
APTMC120AM55CT1AG – Rev 1 June, 2013
www.microsemi.com 4
6
4. Typical Performance Curves
SiC MOSFET
T
J
=25°C
T
J
=150°C
0
20
40
60
80
012345678
I
D
, Drain Current (A)
V
DS
, Drain to Source Voltage (V)
Output Characteristics
V
GS
=20V
V
GS
=20V
10V
0
10
20
30
40
50
60
02468
I
D
, Drain Current (A)
V
DS
, Drain to Source Voltage (V)
Output Characteristics
T
J
=1 50 °C
0.75
1
1.25
1.5
1.75
2
25 50 75 100 125 150
T
J
, Junction Temperature (°C)
Normalized R
DS (on)
vs. Temperature
R
DSon
, Drain to Source ON resistance
V
GS
=20V
I
D
=40A
T
J
=25°C
T
J
=150°C
0
10
20
30
40
50
2468101214
I
D
, Drain Current (A)
V
GS
, Gate to Source Voltage (V)
Transfert Characteristics
0.9
0.7
0.5
0.3
0.1
0.05 Single Pulse
0
0.1
0.2
0.3
0.4
0.5
0.6
0.00001 0.0001 0.001 0.01 0.1 1 10
Thermal ImpedanceC/W)
rectangular Pulse Duration (Seconds)
Maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration
Eon
Eoff
0.0
0.4
0.8
1.2
1.6
2.0
0 1020304050607080
Switching Energy (mJ)
Drain current (A)
Inductive switching energy vs current
V
GS
=-5/20V
R
G
= 25
V
BUS
= 600V
T
J
= 150°C
Eon
Eoff
0.0
0.2
0.4
0.6
0.8
1.0
1.2
25 37.5 50 62.5 75
Switching Energy (mJ)
Gate Resistance (Ohms)
inductive switching energy vs RG
V
GS
=-5/20V
I
D
= 40A
V
BUS
= 600V
T
J
= 150 °C
APTMC120AM55CT1AG
APTMC120AM55CT1AG – Rev 1 June, 2013
www.microsemi.com 5
6
Ciss
Crss
Coss
10
100
1000
10000
0 200 400 600 800 1000
C, Capacitance (pF)
V
DS
, Drain to Source Voltage (V)
Capacitance vs Drain to Source Voltage
0
4
8
12
16
20
0 20406080100
V
GS
, Gate to Source Voltage (V)
Gate Charge (nC)
Gate Charge vs Gate to Source Voltage
V
GS
= 20V
I
D
= 40A
V
DS
= 800V
ZCS
Hard
switching
ZVS
0
100
200
300
400
500
600
700
20 30 40 50 60
Frequency (kHz)
I
D
, Drain Current (A)
Operating Frequency vs Drain Current
V
BUS
=600V
D=50%
R
G
=25
T
J
=1 50 ° C
T
C
=75 ° C
SiC diode
D = 0.9
0.7
0.5
0.3
0.1
0.05 Sin gl e Pul se
0
0.2
0.4
0.6
0.8
1
0.00001 0.0001 0.001 0.01 0.1 1 10
Thermal ImpedanceC/W)
Rectangular Pulse Duration (Seconds)
Maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration
T
J
=25°C
T
J
=75°C
T
J
=125°C
T
J
=175°C
0
10
20
30
40
00.511.522.533.5
I
F
Forward Current (A)
V
F
Forward Voltage (V)
Forward Characteristics
T
J
=25°C
T
J
=75°C
T
J
=125°C
T
J
=17C
0
50
100
150
200
400 600 800 1000 1200 1400 1600
I
R
Reverse Current (µA)
V
R
Reverse Voltage (V)
Reverse Characteristics
0
200
400
600
800
1000
1200
1400
1 10 100 1000
C, Capacitance (pF)
V
R
Reverse Voltage
Capacitance vs.Reverse Voltage
APTMC120AM55CT1AG
APTMC120AM55CT1AG – Rev 1 June, 2013
www.microsemi.com 6
6
DISCLAIMER
The information contained in the document (unless it is publicly available on the Web without access restrictions) is
PROPRIETARY AND CONFIDENTIAL information of Microsemi and cannot be copied, published, uploaded, posted,
transmitted, distributed or disclosed or used without the express duly signed written consent of Microsemi. If the
recipient of this document has entered into a disclosure agreement with Microsemi, then the terms of such Agreement
will also apply. This document and the information contained herein may not be modified, by any person other than
authorized personnel of Microsemi. No license under any patent, copyright, trade secret or other intellectual property
right is granted to or conferred upon you by disclosure or delivery of the information, either expressly, by implication,
inducement, estoppels or otherwise. Any license under such intellectual property rights must be approved by
Microsemi in writing signed by an officer of Microsemi.
Microsemi reserves the right to change the configuration, functionality and performance of its products at anytime
without any notice. This product has been subject to limited testing and should not be used in conjunction with life-
support or other mission-critical equipment or applications. Microsemi assumes no liability whatsoever, and Microsemi
disclaims any express or implied warranty, relating to sale and/or use of Microsemi products including liability or
warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other
intellectual property right. Any performance specifications believed to be reliable but are not verified and customer or
user must conduct and complete all performance and other testing of this product as well as any user or customers final
application. User or customer shall not rely on any data and performance specifications or parameters provided by
Microsemi. It is the customer’s and user’s responsibility to independently determine suitability of any Microsemi
product and to test and verify the same. The information contained herein is provided “AS IS, WHERE IS” and with all
faults, and the entire risk associated with such information is entirely with the User. Microsemi specifically disclaims
any liability of any kind including for consequential, incidental and punitive damages as well as lost profit. The product
is subject to other terms and conditions which can be located on the web at http://www.microsemi.com/legal/tnc.asp
Life Support Application
Seller's Products are not designed, intended, or authorized for use as components in systems intended for space,
aviation, surgical implant into the body, in other applications intended to support or sustain life, or for any other
application in which the failure of the Seller's Product could create a situation where personal injury, death or property
damage or loss may occur (collectively "Life Support Applications").
Buyer agrees not to use Products in any Life Support Applications and to the extent it does it shall conduct extensive
testing of the Product in such applications and further agrees to indemnify and hold Seller, and its officers, employees,
subsidiaries, affiliates, agents, sales representatives and distributors harmless against all claims, costs, damages and
expenses, and attorneys' fees and costs arising, directly or directly, out of any claims of personal injury, death, damage
or otherwise associated with the use of the goods in Life Support Applications, even if such claim includes allegations
that Seller was negligent regarding the design or manufacture of the goods.
Buyer must notify Seller in writing before using Seller’s Products in Life Support Applications. Seller will study with
Buyer alternative solutions to meet Buyer application specification based on Sellers sales conditions applicable for the
new proposed specific part.