ALUMINUM ELECTROLYTIC CAPACITORS UCV Expanded Chip Type, Low Impedance. Chip type, low impedance temperature range up to +105C. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU). UCM Smaller Higher capacitance UCV Specifications Item Performance Characteristics Category Temperature Range -55 to +105C Rated Voltage Range 16 to 35V Rated Capacitance Range 220 to 1500F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 2 minutes' application of rated voltage at 20C, leakage current is not more than 0.01CV (A). Tangent of loss angle (tan ) Rated voltage (V) tan (MAX.) 16 0.16 25 0.14 16 2 3 4 Rated voltage (V) Stability at Low Temperature 35 0.12 Z-25C / Z+20C Impedance ratio Z-40C / Z+20C ZT / Z20 (MAX.) Z-55C / Z+20C Capacitance change tan Leakage current Resistance to soldering heat Black print on the case top. Marking Chip Type Typenumbering numberingsystem system (Example : 35V 220F) Type (Example : 35V 220F) ( 6.3) 1 Series C0.2 ( 8,10) Capacitance Pressure relief vent 7 8 9 10 11 12 13 14 Taping code Size code Configuration Capacitance tolerance (20%) Rated capacitance (220F) Rated voltage (35V) D 6.3 810 Code CL NL Series name Type Voltage A0.2 E A0.2 B0.2 L0.5 6 Positive C0.2 0.3MAX. D0.5 A2 680V CV Series 5 Negative Plastic platform Voltage (V : 35V ) 4 H L0.3 Capacitance 3 A0.2 E A0.2 B0.2 D0.5 A2 220V CV 0.3MAX. 2 UCV 1 V 2 2 1 MC L 1 GS 0.5MAX. Positive Plastic platform 0.5MAX. Voltage (V:35V) Trade mark Within 30% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, Within 10% of the initial capacitance value Capacitance change which is maintained at 250C. The capacitors shall meet Less than or equal to the initial specified value tan the characteristic requirements listed at right when they Less than or equal to the initial specified value Leakage current are removed from the plate and restored to 20C. Shelf Life Lot No. Measurement frequency : 120Hz 35 2 3 3 The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours at 105C. Endurance Lot No. 25 2 3 3 Measurement frequency : 120Hz at 20C H Negative V Code Standard 16 C 25 E 35 V DxL A B C E L H (mm) 8x10 10x10 6.3x7.7 2.9 3.2 2.4 8.3 10.3 6.6 8.3 10.3 6.6 3.1 4.5 2.2 10 10 7.7 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 ALUMINUM ELECTROLYTIC CAPACITORS UCV Dimensions Cap. (F) V 16 25 35 Code 1C 1E 1V 220 221 330 331 470 471 560 561 680 681 820 821 1000 102 1500 152 6.3 x 7.7 0.16 6.3 x 7.7 0.16 600 8 x 10 0.08 850 600 8 x 10 0.08 850 10 x 10 0.06 1190 10 x 10 0.06 1190 6.3 x 7.7 0.16 600 8 x 10 0.08 850 10 x 10 0.06 1190 Impedance Rated ripple Case size D x L (mm) MAX. Impedance () at 20C 100kHz, Rated ripple current(mArms) at 105C 100kHz Frequency coefficient of rated ripple current 0 Frequency0/ Coefficient 50Hz 0.35 120Hz 0.50 300Hz 0.64 1kHz 0.83 10kHz or more 1.00 April 2018