October 19, 2009 100307 Low Power Quint Exclusive OR/NOR Gate General Description Features The 100307 is monolithic quint exclusive-OR/NOR gate. The Function output is the wire-OR of all five exclusive-OR outputs. All inputs have 50 k pull-down resistors. Logic Symbol Logic Equation Low Power Operation 2000V ESD protection Pin/function compatible with 100107 Voltage compensated operating range = -4.2V to -5.7V Available to industrial grade temperature range Available to Standard Microcircuit Drawing (SMD) 5962-9459001 F = (D1a + D2a) + (D 1b + D2b) + (D1c + D2c) + (D1d + D2d) + (D1e + D 2e). Pin Names Description Dna-Dne Data Inputs F Oa-Oe Function Output Data Outputs Oa-Oe Complementary Data Outputs 10030501 (c) 2009 National Semiconductor Corporation 100305 100305 Version 2 Revision 3 www.national.com Print Date/Time: 2009/10/19 20:13:36 100307 Low Power Quint Exclusive OR/NOR Gate OBSOLETE 100307 Connection Diagrams 24-Pin DIP 24-Pin Quad Cerpak 10030503 10030502 www.national.com 2 100305 Version 2 Revision 3 Print Date/Time: 2009/10/19 20:13:36 If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. -50 mA 2000V Recommended Operating Conditions Above which the useful life may be impaired. (Note 1) Storage Temperature (TSTG) -65C to +150C Maximum Junction Temperature (TJ) Ceramic +175C Plastic +150C VEE Pin Potential to Ground Pin -7.0V to +0.5V Input Voltage (DC) VEE to +0.5V Case Temperature (TC) Military Supply Voltage (VEE) -55C to +125C -5.7V to -4.2V Note 1: Absolute maximum ratings are those values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Note 2: ESD testing conforms to MIL-STD-883, Method 3015. Military Version DC Electrical Characteristics VEE = -4.2V to -5.7V, VCC = VCCA = GND, TC = -55C to +125C Symbol VOH Parameter Output HIGH Voltage Min Max Units -1025 -870 mV TC Conditions Notes 0C to +125C VOL Output LOW Voltage -1085 -870 mV -55C VIN = VIH (Max) Loading with -1830 -1620 mV 0C to or VIL (Min) 50 to -2.0V -1830 -1555 mV -55C VIN = VIH (Min) Loading with 0C to or VIL (Max) 500 to -2.0V 1, 2, 3 +125C VOHC Output HIGH Voltage -1035 -55C 0C to mV +125C -1085 VOLC Output LOW Voltage mV -1610 mV 1, 2, 3 +125C VIH Input HIGH Voltage -1165 VIL Input LOW Voltage -1830 IIL Input LOW Current 0.50 IIH IEE -1555 mV -870 mV -1475 -55C -55C Guaranteed HIGH Signal +125C for All Inputs mV -55C to Guaranteed LOW Signal +125C for All Inputs A -55C to VEE = -4.2V +125C VIN = VIL (Min) 1, 2, 3, 4 1, 2, 3,4 1, 2, 3 Input High Current D2a-D2e 250 D1a-D1e 350 D2a-D2e 350 D1a-D1e 500 Power Supply Current -75 -25 A 0C to +125C VEE = -5.7V A -55C VIN = VIH (Max) mA -55C to Inputs Open 1, 2, 3 1, 2, 3 +125C Note 3: F100K 300 Series cold temperature testing is performed by temperature soaking (to guarantee junction temperature equals -55C), then testing immediately without allowing for the junction temperature to stabilize due to heat dissipation after power-up. This provides "cold start" specs which can be considered a worst case condition at cold temperatures. Note 4: Screen tested 100% on each device at -55C, +25C, and +125C, Subgroups 1, 2 3, 7, and 8. Note 5: Sample tested (Method 5005, Table I) on each manufactured lot at -55C, +25C, and +125C, Subgroups A1, 2, 3, 7, and 8. Note 6: Guaranteed by applying specified input condition and testing VOH/VOL. 3 100305 Version 2 Revision 3 Print Date/Time: 2009/10/19 20:13:36 www.national.com 100307 Output Current (DC Output HIGH) ESD (Note 2) Absolute Maximum Ratings (Note 1) 100307 AC Electrical Characteristics VEE = -4.2V to -5.7V, VCC = VCCA = GND Symbol TC = -55C Parameter tPLH Propagation Delay tPHL D2a-D2e to O, O tPLH Propagation Delay tPHL D1a-D1e to O, O tPLH Propagation Delay tPHL Data to F tTLH Transition Time tTHL 20% to 80%, 80% to 20% TC = +25C TC = +125C Units Min Max Min Max Min Max 0.30 2.10 0.40 1.90 0.40 2.40 ns 0.30 1.90 0.40 1.80 0.40 2.20 ns Conditions Notes 1, 2, 3 Figures 1, 2 0.80 2.90 0.90 2.80 0.90 3.40 ns 0.20 1.70 0.30 1.60 0.20 1.70 ns Note 7: F100K 300 Series cold temperature testing is performed by temperature soaking (to guarantee junction temperature equals -55C), then testing immediately after power-up. This provides "cold start" specs which can be considered a worst case condition at cold temperatures. Note 8: Screen tested 100% on each device at +25C temperature only, Subgroup A9. Note 9: Sample tested (Method 5005, Table I) on each mfg. lot at +25C, Subgroup A9, and at +125C and -55C temperatures, Subgroups A10 and A11. Note 10: Not tested at +25C, +125C, and -55C temperature (design characterization data). Test Circuitry 10030505 Notes: VCC, VCCA = +2V, VEE = -2.5V L1 and L2 = equal length 50 impedance lines RT = 50 terminator internal to scope Decoupling 0.1 F from GND to VCC and VEE All unused outputs are loaded with 50 to GND CL = Fixture and stray capacitance 3 pF FIGURE 1. AC Test Circuit www.national.com 4 100305 Version 2 Revision 3 Print Date/Time: 2009/10/19 20:13:36 4 100307 Switching Waveforms 10030506 FIGURE 2. Propagation Delay and Transition Times 5 100305 Version 2 Revision 3 Print Date/Time: 2009/10/19 20:13:36 www.national.com 100307 Physical Dimensions inches (millimeters) unless otherwise noted 24-Pin Ceramic Dual-In-Line Package (D) NS Package Number J24E 24-Pin Quad Cerpak (F) NS Package Number W24B www.national.com 6 100305 Version 2 Revision 3 Print Date/Time: 2009/10/19 20:13:36 100307 Notes 7 100305 Version 2 Revision 3 Print Date/Time: 2009/10/19 20:13:36 www.national.com 100307 Low Power Quint Exclusive OR/NOR Gate Notes For more National Semiconductor product information and proven design tools, visit the following Web sites at: Products Design Support Amplifiers www.national.com/amplifiers WEBENCH(R) Tools www.national.com/webench Audio www.national.com/audio App Notes www.national.com/appnotes Clock and Timing www.national.com/timing Reference Designs www.national.com/refdesigns Data Converters www.national.com/adc Samples www.national.com/samples Interface www.national.com/interface Eval Boards www.national.com/evalboards LVDS www.national.com/lvds Packaging www.national.com/packaging Power Management www.national.com/power Green Compliance www.national.com/quality/green Switching Regulators www.national.com/switchers Distributors www.national.com/contacts LDOs www.national.com/ldo Quality and Reliability www.national.com/quality LED Lighting www.national.com/led Feedback/Support www.national.com/feedback Voltage Reference www.national.com/vref Design Made Easy www.national.com/easy www.national.com/powerwise Solutions www.national.com/solutions Mil/Aero www.national.com/milaero PowerWise(R) Solutions Serial Digital Interface (SDI) www.national.com/sdi Temperature Sensors www.national.com/tempsensors SolarMagicTM www.national.com/solarmagic Wireless (PLL/VCO) www.national.com/wireless www.national.com/training PowerWise(R) Design University THE CONTENTS OF THIS DOCUMENT ARE PROVIDED IN CONNECTION WITH NATIONAL SEMICONDUCTOR CORPORATION ("NATIONAL") PRODUCTS. NATIONAL MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ACCURACY OR COMPLETENESS OF THE CONTENTS OF THIS PUBLICATION AND RESERVES THE RIGHT TO MAKE CHANGES TO SPECIFICATIONS AND PRODUCT DESCRIPTIONS AT ANY TIME WITHOUT NOTICE. NO LICENSE, WHETHER EXPRESS, IMPLIED, ARISING BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. TESTING AND OTHER QUALITY CONTROLS ARE USED TO THE EXTENT NATIONAL DEEMS NECESSARY TO SUPPORT NATIONAL'S PRODUCT WARRANTY. EXCEPT WHERE MANDATED BY GOVERNMENT REQUIREMENTS, TESTING OF ALL PARAMETERS OF EACH PRODUCT IS NOT NECESSARILY PERFORMED. NATIONAL ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR BUYER PRODUCT DESIGN. BUYERS ARE RESPONSIBLE FOR THEIR PRODUCTS AND APPLICATIONS USING NATIONAL COMPONENTS. PRIOR TO USING OR DISTRIBUTING ANY PRODUCTS THAT INCLUDE NATIONAL COMPONENTS, BUYERS SHOULD PROVIDE ADEQUATE DESIGN, TESTING AND OPERATING SAFEGUARDS. EXCEPT AS PROVIDED IN NATIONAL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, NATIONAL ASSUMES NO LIABILITY WHATSOEVER, AND NATIONAL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY RELATING TO THE SALE AND/OR USE OF NATIONAL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. National Semiconductor and the National Semiconductor logo are registered trademarks of National Semiconductor Corporation. All other brand or product names may be trademarks or registered trademarks of their respective holders. Copyright(c) 2009 National Semiconductor Corporation For the most current product information visit us at www.national.com National Semiconductor Americas Technical Support Center Email: support@nsc.com www.national.com Tel: 1-800-272-9959 National Semiconductor Europe Technical Support Center Email: europe.support@nsc.com 100305 Version 2 Revision 3 National Semiconductor Asia Pacific Technical Support Center Email: ap.support@nsc.com Print Date/Time: 2009/10/19 20:13:36 National Semiconductor Japan Technical Support Center Email: jpn.feedback@nsc.com