SF2089C * * * * Low Insertion Loss 5.0 X 5.0 mm Surface-mount Case Single-ended Input and Output Complies with Directive 2002/95/EC (RoHS) 327.5 MHz SAW Filter Pb Absolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband +13 dBm Maximum DC Voltage on any Non-ground Terminal 30 VDC -40 to +85 C Storage Temperature Range in Tape and Reel Suitable for Lead-free Soldering - Maximum Soldering Temperature 260 C for 30 s SM5050-8 Electrical Characteristics Characteristic Center Frequency Insertion Loss 1.5 dB Bandwidth Amplitude Ripple, fC17.5 MHz, within adjacent 5 MHz windows Group Delay Deviation, fC17.5 MHz, within adjacent 5 MHz windows Group Delay Deviation, fC17.5 MHz, full bandwidth VSWR at fC 40 dB Rejection Bandwidth Operating Temperature Range Case Style Lid Symbolization (Y=year, WW=week, S=shift) Sym Notes fC 1 1 1 1 1 1 1 1, 2 BW1.5 Min Typ Max 327.5 12 35 1 50 50 100 2.5:1 65 -40 85 SM5050-8 5 x 5 mm Nominal Footprint RFM 591 YWWS Units MHz dB MHz dBP-P nsP-P nsP-P MHz C Electrical Connections Connection Terminals Port 1 Input Port 2 Output 1 5 Ground All others Dot indicates Pin 1 CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. 2. 3. 4. 5. 6. 7. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. The design, manufacturing process, and specifications of this filter are subject to change. Tape and Reel Standard ANSI / EIA 481. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. www.RFM.com E-mail: info@rfm.com (c)2009-2010 by RF Monolithics, Inc. Page 1 of 6 SF2089C - 6/14/10 18 Nov 2005 15:21:41 CH1 S11 1 U FS 0 . 0000 1 : 0 . 0000 0 . 000 000 MHz sf2089c 0 . 0000 CH3 S22 1 : 0 . 0000 0 . 000 000 H 1 U FS 0 . 0000 MHz Markers REF=1 2 : 3 . 0195 1 . 6621 282 . 553 kHz 0 . 0000 H CH1 CH3 Markers REF=1 2 : 2 . 5342 4 . 0986 282 . 553 kHz 1 1 3 : 9 . 3320 8 . 3770 -19 . 5794 MHz PRm 2 3 4 4 : -2 . 2051 -6 . 1328 20 . 1445 MHz C Full CENTR CH2 327 . 500 S21 MHz SPAN LOG 100 . 000 10 dB/ MHz 4 4 : 13 . 325 -2 . 1670 20 . 1445 MHz C CENTR REF -12 dB 3 : 70 . 313 m 1 . 7891 -19 . 5794 MHz 32 327 . 500 1 : 0 . 0000 MHz dB SPAN 0 . 000 100 . 000 000 MHz MHz 1 CH2 BW : C 3 Full 2 Markers REF=1 39 . 723986 MHz 327 . 782553 MHz 4 cent : Q: 8 . 2515 PRm 1_ loss CENTER 327 . 500 www.RFM.com E-mail: info@rfm.com (c)2009-2010 by RF Monolithics, Inc. 000 MHz SPAN 100 . 000 000 : -10 . 490 dB MHz Page 2 of 6 SF2089C - 6/14/10 18 Nov 2005 15:16:08 CH2 S21 DEL 50 ns/ 3 : -4 . 4823 REF 345.2 ns ns -30 . 000 000 MHz CH2 Markers REF=2 sf2089c mean s . dev : 335 . 96 ns : 6 . 4094 ns : 25 . 616 ns Smo 3 p-p PRm C 2 1 Full CH4 S21 LOG 1 dB/ 3 : . 33450 REF -9.099 dB dB -30 . 000 000 MHz CH4 Markers REF=2 mean s . dev p-p 3 : -10 . 745 dB : . 22620 dB : 1 . 0238 dB C 1 CENTER www.RFM.com E-mail: info@rfm.com (c)2009-2010 by RF Monolithics, Inc. 327 . 500 000 MHz 2 SPAN 40 . 000 000 MHz Page 3 of 6 SF2089C - 6/14/10 1.590 REF. RFM RFM RFM DRILL ALL HOLES #76 DRILL (0.020) ALL HOLES ARE PLATED THRU. www.RFM.com E-mail: info@rfm.com (c)2009-2010 by RF Monolithics, Inc. Page 4 of 6 SF2089C - 6/14/10 SM5050-8 Surface-Mount 8-Terminal Ceramic Case 5.0 X 5.0 mm Nominal Footprint Case Dimensions Dimension A B C D E F G H I J K L M N O P Q L J M Min 4.80 4.80 1.30 1.98 1.07 0.50 2.39 P H mm Nom 5.00 5.00 1.50 2.08 1.17 0.64 2.54 1.27 0.76 1.55 2.79 0.76 2.36 1.55 2.79 2.79 2.79 Max 5.20 5.20 1.70 2.18 1.27 0.70 2.69 Min 0.189 0.189 0.050 0.078 0.042 0.020 0.094 Inches Nom 0.197 0.197 0.060 0.082 0.046 0.025 0.100 0.050 0.030 0.061 0.110 0.030 0.093 0.061 0.110 0.110 0.110 Max 0.205 0.205 0.067 0.086 0.050 0.028 0.106 Case Materials Materials I Q N K Solder Pad Plating 0.3 to 1.0 m Gold over 1.27 to 8.89 m Nickel Lid Plating 2.0 to 3.0 m Nickel Body Al2O3 Ceramic O Pb Free PCB Footprint TOP VIEW BOTTOM VIEW A E C B 8 8 1 7 D 7 1 2 6 6 2 3 5 5 3 4 G 4 F www.RFM.com E-mail: info@rfm.com (c)2009-2010 by RF Monolithics, Inc. Page 5 of 6 SF2089C - 6/14/10 "B" REF. 100 REF. Tape and Reel Specifications "B" Nominal Size Quantity Per Reel Inches millimeters 7 178 500 13 330 3000 See Detail "A" 13. 0 12.0 20 .2 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao Bo Ko Pitch W 5.3 mm 5.3 mm 2.0 mm 8.0 mm 12.0 mm PIN #1 USER DIRECTION OF FEED www.RFM.com E-mail: info@rfm.com (c)2009-2010 by RF Monolithics, Inc. Page 6 of 6 SF2089C - 6/14/10