www.RFM.com E-mail: info@rfm.com Page 1 of 6
©2009-2010 by RF Monolithics, Inc. SF2089C - 6/14/10
1. Unless noted othe rwise, all specifica tio ns apply ov er the opera tin g tempera tu re range with f ilter so lder ed to the spec ified d emons tr ation bo ard with i mpeda nce
matching to 50 Ω and measured with 50 Ω network analyzer.
2. Rejectio n is measured as attenuation below the minimum IL point in the passb and. Rejection in final u ser application is dependent on PCB lay out and ex terna l
impedance matching des ign. See Application Note No. 42 for deta ils.
3. The desi gn, manufact uring proce ss, and specifications of this filter are subject to change.
4. Tape and Reel Standard ANSI / EIA 481.
5. Either Port 1 or Port 2 may be used for either inpu t or out put in the design. However, impedances and impedance matching may vary be tween Port 1 and Port
2, so that the filter mus t always be inst alled in one direc tion per the ci rcuit design .
6. US and international patents may apply.
7. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc.
Electrical Characteristics
Characteristic Sym Notes Min Typ Max Units
Center Frequency fC1 327.5 MHz
Insertion Loss 112dB
1.5 dB Bandwidth BW1.5 135 MHz
Amplitude Ripple, fC±17.5 MHz, within adjacent 5 MHz windows 1 1 dBP-P
Group Delay Deviation, fC±17.5 MHz, within adjacent 5 MHz windows 1 50 nsP-P
Group Delay Deviation, fC±17.5 MHz, full bandwidth 1 50 100 nsP-P
VSWR at fC1 2.5:1
40 dB Rejection Bandwidth 1, 2 65 MHz
Operating Temperature Range -40 85 °C
Case Style SM5050-8 5 x 5 mm Nominal Footprint
Lid Symbolization (Y=year, WW= week, S=shift) RFM 591 YWWS
SM5050-8
• Low Insertion Loss
• 5.0 X 5.0 mm Surface-mount Case
• Single-ended Inpu t and Ou tput
• Complies with Directive 2002/95/EC (RoHS)
Absolute Maximum Ratings
Rating Value Units
Maximum Incident Power in Passband +13 dBm
Maximum DC Voltage on any Non-ground Terminal 30 VDC
Storage Temperature Range in Tape and Reel -40 to +85 °C
Suitable for Lead-free Soldering - Maximum Soldering Temperature 260 °C for 30 s
327.5 MHz
SAW Filter
SF2089C
Pb
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
Electrical Connections
Connection Terminals
Port 1 Input 1
Port 2 Output 5
Ground All others
Dot indicates Pin 1
www.RFM.com E-mail: info@rfm.com Page 2 of 6
©2009-2010 by RF Monolithics, Inc. SF2089C - 6/14/10
CH1 S11 1 U FS
CENTR 327 . 500 MHz SPAN 100 . 000 MHz
C
PRm
CH2 S21 LOG 10 dB/ REF -12 dB
CENTER 327 . 500 000 MHz SPAN 100 . 000 000 MHz
C
PRm
CH3 S22 1 U FS
CENTR 327 . 500 MHz SPAN 100 . 000 MHz
C
18 Nov 2005 15:21:41
1
23
4
1 : 0. 0000 0. 0000 0. 0000 H
0. 000 000 MHz
REF=1
CH1 Markers
2 : 3. 0195
1. 6621
282 . 553 kHz
3 : 9. 3320
8. 3770
-19 . 5794 MHz
4 : -2 . 2051
-6 . 1328
20 . 1445 MHz
1
2
3 4
1 : 0. 0000 dB 0. 000 000 MHz
REF=1
CH2 Markers
BW: 39 . 723986 MHz
cent : 327 . 782553 MHz
Q: 8. 2515
1_ loss : -10 . 490 dB
1
2
34
1 : 0. 0000 0. 0000 0. 0000 H
0. 000 000 MHz
REF=1
CH3 Markers
2 : 2. 5342
4. 0986
282 . 553 kHz
3 : 70 . 313 m
1. 7891
-19 . 5794 MHz
4 : 13 . 325
-2 . 1670
20 . 1445 MHz
sf2089c
Full
Full
www.RFM.com E-mail: info@rfm.com Page 3 of 6
©2009-2010 by RF Monolithics, Inc. SF2089C - 6/14/10
CH2 S21 DEL 50 ns/ REF 345.2 ns
C
Smo
PRm
CH4 S21 LOG 1 dB/ REF -9.099 dB
CENTER 327 . 500 0 00 MHz SPAN 40 . 000 0 00 MHz
C
18 Nov 2005 15:16:08
12
3
3 : -4 . 4823 ns -30 . 000 000 MHz
REF=2
CH2 Markers
mean : 335 . 96 ns
s. dev : 6. 4094 ns
p-p : 25 . 616 ns
12
3
3 : . 33450 dB -30 . 000 000 MHz
REF=2
CH4 Markers
mean : -10 . 745 dB
s. dev : . 22620 dB
p-p : 1. 0238 dB
sf2089c
Full
www.RFM.com E-mail: info@rfm.com Page 4 of 6
©2009-2010 by RF Monolithics, Inc. SF2089C - 6/14/10
RFM
RFMRFM
DRILL ALL HOLES #76 DRILL (0.020)
ALL HOLES ARE PLA T ED THRU.
1.590 REF.
www.RFM.com E-mail: info@rfm.com Page 5 of 6
©2009-2010 by RF Monolithics, Inc. SF2089C - 6/14/10
Case Dimensions
Dimension mm Inches
Min Nom Max Min Nom Max
A4.80 5.00 5.20 0.189 0.197 0.205
B4.80 5.00 5.20 0.189 0.197 0.205
C1.30 1.50 1.70 0.050 0.060 0.067
D1.98 2.08 2.18 0.078 0.082 0.086
E1.07 1.17 1.27 0.042 0.046 0.050
F0.50 0.64 0.70 0.020 0.025 0.028
G2.39 2.54 2.69 0.094 0.100 0.106
H1.27 0.050
I0.76 0.030
J1.55 0.061
K2.79 0.110
L0.76 0.030
M2.36 0.093
N1.55 0.061
O2.79 0.110
P2.79 0.110
Q2.79 0.110
Materials
Solder Pad
Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel
Lid Plating 2.0 to 3.0 µm Nickel
Body Al2O3 Ceramic
Pb Free
SM5050-8 Surface-Mount 8-Terminal Ceramic Case
5.0 X 5.0 mm Nominal Footprint
TOP VIEW BOTTOM VIEW
Case Materials
PCB Footprint
A
1
2
3
B
7
6
5
4
C
D7
6
5
4
E
F
G
1
2
3
88
H
I
J
K
L
M
N
O
P
Q
www.RFM.com E-mail: info@rfm.com Page 6 of 6
©2009-2010 by RF Monolithics, Inc. SF2089C - 6/14/10
Tape and Reel Specifications
“B”
Nominal Size Quantity Per Reel
Inches millimeters
7 178 500
13 330 3000
USER DIRECTION OF FEED
COMPONENT ORIENTATION and DIMENSIONS
Carrier Tape Dimensions
Ao 5.3 mm
Bo 5.3 mm
Ko 2.0 mm
Pitch 8.0 mm
W12.0 mm
PIN #1
See Detail " A"
13.0
20.2
2.0
12.0
100 REF.
"B" REF.
