This product complies with the RoHS Directive (EU 2002/95/EC). PNJ4K01F Bipolar Integrated Circuit with Photodetection Function For brightness control systems Features Peak sensitivity wavelength: 560 nm Output ratio of incandescent light and fluorescent light: 1.1 (typ.) Small, thin type package: 1.55 mm x 1.5 mm x 0.53 mm Surface-mouting type for reflow soldering Absolute Maximum Ratings Ta = 25C Parameter Operating supply voltage Symbol Rating Unit VCC - 0.5 to +7.0 V Power dissipation PD 35 mW Operating ambient temperature Topr -30 to +85 C Storage temperature Tstg -40 to +100 C Electro-Optical Characteristics Ta = 25C3C, VCC = 3 V Parameter Symbol Operating supply voltage Conditions Min VCC Saturation voltage *3 Typ Max Unit 5.5 V 2.94 3.00 V 480 920 mA 1.4 VO(sat) EV = 100 lx, RL = 100 kW Supply current *1 ICC EV = 1 000 lx, RL = 1 kW Output current 1 *1, *3 IO1 EV = 100 lx 29.0 48.0 90.0 mA Output current 2 *2, *3 IO2 EV = 10 lx 2.5 4.3 7.9 mA Output current 3 *2, *3 IO3 EV = 100 lx 25.0 43.0 79.0 mA 1.1 1.65 10 100 nA Output current ratio 2.60 IO1 / IO3 Drain current ID Peak sensitivity wavelength EV = 0 lx PD 560 Rise time *4 tr 100 1 000 ms Fall time *4 tf 300 1 000 ms Delay time *4 td Storage time *4 ts RL = 5.1 kW nm 50 ms 5 ms Note) *1: Light source is CIE standard A light source. (Incandescent lamp) *2: Light source is fluorescence light. *3: Output current measurement circuit VCC Light source IOUT PNJ4K01F A *4: Switching time measurement method LED pulse VCC White LED PNJ4K01F IOUT 90% 10% RL td Publication date: October 2010 Ver. AEK tr tf ts 1 This product complies with the RoHS Directive (EU 2002/95/EC). PNJ4K01F Block Diagram VCC 1 Current Amp 2, 3, 4, 5 GND 2 Ver. AEK 6 IOUT This product complies with the RoHS Directive (EU 2002/95/EC). PNJ4K01F Package (Unit: mm) KPTFTN6K0001 Pin name 1: VCC 2: GND 3: GND 4: GND 5: GND 6: IOUT Ver. AEK 3 Request for your special attention and precautions in using the technical information and semiconductors described in this book (1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) The technical information described in this book is intended only to show the main characteristics and application circuit examples of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) The products described in this book are intended to be used for general applications (such as office equipment, communications equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book. Consult our sales staff in advance for information on the following applications: - Special applications (such as for airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. It is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with your using the products described in this book for any special application, unless our company agrees to your using the products in this book for any special application. (4) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company. 20100202