RS1A - RS1M — Fast Rectifiers
Publication Order Number:
RS1M/D
© 2009 Semiconductor Components Industries, LLC.
November-2017, Rev. 2 1
RS1A - RS1M
Fast Rectifiers
Features
• Glass-Passivated Junction
• For Surface Mounted Applications
• Built-in Strain Relief, Ideal for Auto mated Placement
• UL Certif ie d: Certific ate # E326243
Ordering Information
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera-
ble above the recommended operating conditions and stressing the parts to these levels is not recommended. In addi-
tion, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.
Part Number Marking Package Packing Method
RS1A RS1A
DO-214AC Tape and Reel
RS1B RS1B
RS1D RS1D
RS1G RS1G
RS1J RS1J
RS1K RS1K
RS1M RS1M
Symbol Parameter Value Units
1A 1B 1D 1G 1J 1K 1M
VRRM Maximum Repetitive Reverse Voltage 50 100 200 400 600 80 0 1000 V
IF(AV) Averag e Recti fied Forward Current
at TA = 10 0 °C 1.0 A
IFSM Non-Repetitive Peak Forward Surge
Current: 8.3 ms Single Half-Sine Wave 30 A
TSTG Storage Temperature Range -55 to +150 °C
TJOperating Junction Temperature -55 to +150 °C
SMA/DO-214AC
COLOR BAND DENOTES CATHODE
RS1A - RS1M — Fast Rectifiers
www.onsemi.com
2
Thermal Characteristics(1)
Note:
1. Device mounted on FR-4 PCB 0.013 mm.
Electrical Characteristics
Values are at TA = 25°C unless otherwise noted .
Symbol Parameter Value Units
PDPower Dissipation 1.19 W
RθJA Thermal Resistance, Junction to Ambient(1) 105 °C/W
RθJL Thermal Resistance, Junction to Lead(1) 32 °C/W
Symbol Parameter Teat Conditions Value Units
1A 1B 1D 1G 1J 1K 1M
VFForward Voltage 1.0 A 1.3 V
trr Reverse-Recovery
Time
IF = 0.5 A, IR = 1.0 A,
Irr = 0.25 A 150 250 500 ns
IRReverse Current at
Rated VR TA=25°C5.0μA
TA=125°C50μA
CTTotal Capacitance VR = 4.0 V,
f = 1.0 MHz 10 pF
RS1A - RS1M — Fast Rectifiers
Typical Performance Characteristics
Figure 1. Forward Cur rent Derating Curve Figure 2. Non-Repetitive Surge Current
Figure 3. Forward Voltage Ch ara ct e ri st ic s Figure 4. Reverse Current vs. Reverse Voltage
Figure 5. Total Capacitance
0 25 50 75 100 125 150 175
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
Ambient Temperature [ºC]
Average Rectified Forward Current, IF [A]
RESISTIVE OR
INDUCTIVE LOAD
P. C. B . M O UN T E D
ON 0.2 x 0.2"
(5.0 x 5.0 mm)
CO PPER PAD AR EA S
12 51020 50100
0
5
10
15
20
25
30
Number of Cycles at 60Hz
Peak Forward Surge Current, IFSM [A]
0.4 0.6 0.8 1 1.2 1.4 1.6
0.01
0.1
1
10
Forward Voltage, VF [V]
Forward Current, IF [A]
Pulse Width = 300μ
μμ
μs
2% Duty Cycle
T = 25 C
º
A
T = 125 C
º
A
0 20406080100120140
0.001
0.01
0.1
1
10
Percent of Rated Peak Reverse Voltage [%]
Reverse Current, IR [ uA ]
T = 25 C
º
A
T = 100 C
º
A
T = 125 C
º
A
1 2 5 10 20 50 100
1
5
10
20
50
Reverse Voltage, VR [V]
Total Capacitance, CT [pF]
www.onsemi.com
3
RS1A - RS1M — Fast Rectifiers
Physical Dimension
Figure 6. 2-LEAD, SMA, JEDEC DO-214, VARIATION AC (ACTIVE)
Package drawings are provided as a service to customers considering ON Semiconductor components. Drawings may change in
any manner without notice. Please note the revision and/or date on the drawing and contact a ON Semiconductor representative to
verify or obtain the most recent revision. Package specifications do not expand the terms of ON Semiconductor’s worldwide terms and
conditions, specifically the warranty therein, which covers ON Semiconductor products.
1.75
2.65
4.30
2.70 MAX
2.20
1.90
0.30
0.05
2.05
1.95
B0.203
0.050
A
0.13 MC B A
C
2.95
2.50 B1.65
1.20
B5.60
4.80
B4.75
4.00
0.13 MC B A
B
A
0.41
0.15
1.52
0.75
R0.15 4X
8°
0°
0.45
0 -8°
DETAIL A
SCALE 20 : 1
LAND PATTERN RECOMMENDATION
GAUGE
PLANE
NOTES:
A. EXCEPT WHERE NOTED CONFORMS TO
JEDEC DO214 VARIATION AC.
BDOES NOT COMPLY JEDEC STD. VALUE.
C. ALL DIMENSIONS ARE IN MILLIMETERS.
D. DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH AND TIE BAR PROTRUSIONS.
E. DIMENSION AND TOLERANCE AS PER ASME
Y14.5-1994.
F. LAND PATTERN STD. DIOM5025X231M.
G. DRAWING FILE NAME: DO214ACREV1
DO-214AC
www.onsemi.com
4
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
❖
