MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCT OBER 1998
1
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
D
Input Resistance...3 k to 7 k
D
Input Signal Range...±30 V
D
Operate From Single 5-V Supply
D
Built-In Input Hysteresis (Double
Thresholds)
D
Response Control that Provides:
Input Threshold Shifting
Input Noise Filtering
D
Meet or Exceed the Requirements of
TIA/EIA-232-F and ITU Recommendation
V.28
D
Fully Interchangeable With Motorola
MC1489 and MC1489A
description
These devices are monolithic low-power Schottky
quadruple line receivers designed to satisfy the
requirements of the standard interface between
data-terminal equipment and data-communica-
tion equipment as defined by TIA / EIA-232-F. A
separate response-control (CONT) terminal is
provided for each receiver . A resistor or a resistor
and bias-voltage source can be connected
between this terminal and ground to shift the input
threshold levels. An external capacitor can be
connected between this terminal and ground to
provide input noise filtering.
The SN55189 and SN55189A are characterized
for operation over the full military temperature
range of –55°C to 125°C. The MC1489,
MC1489A, SN75189, and SN75189A are
characterized for operation from 0°C to 70°C.
Copyright 1998, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Motorola is a trademark of Motorola, Incorporated.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
1
2
3
4
5
6
7
14
13
12
11
10
9
8
1A
1CONT
1Y
2A
2CONT
2Y
GND
VCC
4A
4CONT
4Y
3A
3CONT
3Y
SN55189, SN55189A ...J OR W PACKAGE
MC1489, MC1489A, SN75189, SN75189A
D, N, OR NS PACKAGE
(TOP VIEW)
3 2 1 20 19
910111213
4
5
6
7
8
18
17
16
15
14
4CONT
NC
4Y
NC
3A
1Y
NC
2A
NC
2CONT
SN55189, SN55189A . . . FK PACKAGE
(TOP VIEW)
1CONT
1A
NC
3Y
3CONT 4A
2Y
GND
NC
NC – No internal connection
CC
V
The NS package is only available left-end taped and reeled.
For SN75189, order SN75189NSR.
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCT OBER 1998
2POST OFFICE BOX 655303 DALLAS, TEXAS 75265
logic symbol
THRS ADJ
4Y
11
3Y
8
2Y
6
1Y
3
1
1A 2
1 CONT 4
2A 5
2 CONT 10
3A 9
3 CONT 13
4A
4 CONT 12
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
Pin numbers shown are for the D, J, N, NS, and W packages.
logic diagram (positive logic)
Control
Response
AY
schematic (each receiver)
Input A
10 k
4 k
Response
Control R1
9 k5 k1.66 k
GND
Output Y
VCC
MC1489
SN55189
SN75189
MC1489A
SN55189A
SN75189A
R1 8.4 k1.84 k
Resistor values shown are nominal.
MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCT OBER 1998
3
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
absolute maximum ratings over operating free-air temperature (unless otherwise noted)
Supply voltage, VCC (see Note 1) 10 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage, VI ±30 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output voltage, IO 20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous total power dissipation See Dissipation Rating Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating free-air temperature range, TA: SN55189, SN55189A 55°C to 125°C. . . . . . . . . . . . . . . . . . . . . .
MC1489, MC1489A, SN75189, SN75189A 0°C to 70°C. . . . . .
Storage temperature range, Tstg –65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Case temperature for 60 seconds, FK package 260°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J or W package 300°C. . . . . . . . . . . . . . . .
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D, N, or NS package 260°C. . . . . . . . . . . .
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only , and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may af fect device reliability.
NOTES: 1. All voltage values are with respect to the network ground terminal.
DISSIPATION RATING TABLE
PACKAGE
TA 25°CDERATING FACTOR TA = 70°C TA = 125°C
PACKAGE
A
POWER RATING ABOVE TA = 25°C
A
POWER RATING
A
POWER RATING
D950 mW 7.6 mW/°C 608 mW N/A
FK 1375 mW 11.0 mW/°C 880 mW 275 mW
J1375 mW 11.0 mW/°C 880 mW 275 mW
N 1150 mW 9.2 mW/°C 736 mW N/A
NS 625 mW 4.0 mW/°C 445 mW N/A
W1000 mW 8.0 mW/°C 640 mW 200 mW
In the J package, SN55189 and SN55189A chips are either silver glass or alloy mounted.
recommended operating conditions
MIN NOM MAX UNIT
Supply voltage, VCC 4.5 5 5.5 V
Input voltage, VI–25 25 V
High-level output current, IOH –0.5 mA
Low-level output current, IOL 10 mA
Operating free-air temperature, TA0 70 °C
MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCT OBER 1998
4POST OFFICE BOX 655303 DALLAS, TEXAS 75265
electrical characteristics over operating free-air temperature range, VCC = 5 V ± 1% (unless
otherwise noted)
TEST
SN55189 MC1489, MC1489A
SN75189
PARAMETER TEST
FIGURE TEST CONDITIONS
SN55189A
SN75189
SN75189A UNIT
MIN TYPMAX MIN TYPMAX
TA = 25°C 1 1.3 1.5 1 1.3 1.5
’89 TA = 0°C to 70°C 0.9 1.6
VIT
Positive-going input
1
TA = –55°C to 125°C 0.6 1.9
V
V
IT+
gg
threshold voltage
1
TA = 25°C 1.75 1.9 2.25 1.75 1.9 2.25
V
’89A TA = 0°C to 70°C 1.55 2.25
TA = –55°C to 125°C 1.30 2.65
Nti iit
TA = 25°C 0.75 1.0 1.25 0.75 1.0 1.25
VIT– Negative-going input
threshold voltage
1’89, ’89A TA = 0°C to 70°C 0.65 1.25 V
threshold
voltage
TA = –55°C to 125°C 0.35 1.6
VOH
High-level
1
VI = 0.75 V, IOH = –0.5 mA 2.6 4 5 2.6 4 5
V
V
OH
g
output voltage
1
Input open, IOH = –0.5 mA 2.6 4 5 2.6 4 5
V
VOL
Low-level
1
IOL =10mA
02
045
02
045
V
V
OL output voltage
1
I =
,
I
OL =
10
mA
0
.
2
0
.
45
0
.
2
0
.
45
V
IIH
High-level
2
VI = 25 V 3.6 8.3 3.6 8.3
mA
I
IH
g
input current
2
VI = 3 V 0.43 0.43
mA
IIL
Low-level
2
VI = –25 V 3.6 8.3 3.6 –8.3
mA
I
IL input current
2
VI = –3 V 0.43 0.43
mA
IOS
Short-circuit
3
3
3
mA
I
OS output current
3
3
3
mA
ICC Supply current 2 VI = 5 V, Outputs open 20 26 20 26 mA
All characteristics are measured with the response-control terminal open.
All typical values are at VCC = 5 V, TA = 25°C.
switching characteristics, VCC = 5 V, CL = 15 pF, TA = 25°C
PARAMETER
TEST
TEST CONDITIONS
MIN
TYP
MAX
UNIT
PARAMETER
FIGURE
TEST
CONDITIONS
MIN
TYP
MAX
UNIT
tPLH Propagation delay time, low- to high-level output RL = 3.9 k25 85
ns
tPHL Propagation delay time, high- to low-level output
4
RL = 390 25 50
ns
tTLH T ransition time, low- to high-level output
4
RL = 3.9 k120 175
ns
tTHL T ransition time, high- to low-level output RL = 390 10 20
ns
MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCT OBER 1998
5
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
PARAMETER MEASUREMENT INFORMATION
Open
Unless
Otherwise
Specified CC
–VC
RC
+VC
RC
VIT, V1
VCC
VOL IOL
VOH
–IOH
Control
Response
Figure 1. VIT+ , VIT , VOH , VOL
IIL
VIIIH
VCC
ICC (see Note A)
Open
Response Control Open
NOTE A: ICC is tested for all four receivers simultaneously.
Figure 2. IIH , IIL , ICC
–IOS
Control
Open
Response
VCC
Figure 3. IOS
Arrows indicate actual direction of current flow. Current into a terminal is a positive value.
MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCT OBER 1998
6POST OFFICE BOX 655303 DALLAS, TEXAS 75265
PARAMETER MEASUREMENT INFORMATION
90% 50%
10%
tTHL tTLH
tPLH
10%50% 90%
VOL
VOH
0 V
4 V
10 ns
10%
50%
90%
tPHL
10% 50%
10 ns
VCC
Pulse
Generator
(see Note A)
(see Note B)
CL = 15 pF
See Note C
RL
Output
90%
Open
Control
Response
TEST CIRCUIT
VOLTAGE WAVEFORMS
Input
Output
NOTES: A. The pulse generator has the following characteristics: ZO = 50 , tw = 500 ns.
B. CL includes probe and jig capacitances.
C. All diodes are 1N3064 or equivalent.
Figure 4. Test Circuit and Voltage Waveforms
MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCT OBER 1998
7
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
–2
6
5
4
3
2
1
0
VI – Input Voltage – V 543210–1
VO – Output Voltage – V
–3
V
IT+
VIT–
ÎÎÎÎ
ÎÎÎÎ
VIT+
VIT–
VIT+
ÎÎÎ
ÎÎÎ
VIT–
ÎÎÎ
ÎÎÎ
VIT+
VIT–
SN65189, SN75189
OUTPUT VOLTAGE
vs
INPUT VOLTAGE
ÁÁÁ
ÁÁÁ
ÁÁÁ
VC = 5 V
RC = 5 k
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
RC = 13 k
VC = 5 V
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
RC = 11 k
VC = – 5 V
ÁÁÁÁ
VO
ÁÁÁÁ
ÎÎÎÎ
RC =
ÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁ
TA = 25°C
VCC = 5 V
See Figure 1
Figure 5
VIT+
VIT–
VIT+
VIT–
VIT+
VIT–
–3 –1 0 1 2 3 4 5
V
I
– Input Voltage – V
–2
VO – Output Voltage – V
0
1
2
3
4
5
6
SN65189A, SN75189A
OUTPUT VOLTAGE
vs
INPUT VOLTAGE
ÁÁÁÁ
ÁÁÁÁ
VC = 5 V
RC = 5 k
ÁÁÁÁ
ÁÁÁÁ
VC = – 5 V
RC = 11 k
ÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁ
See Figure 1
VCC = 5 V
TA = 25°C
VO
ÎÎÎÎ
ÎÎÎÎ
RC =
Figure 6
MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCT OBER 1998
8POST OFFICE BOX 655303 DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 7
INPUT THRESHOLD VOLTAGE
vs
FREE-AIR TEMPERATURE
2.2
2
1.8
1.6
1.4
1.2
1
0.8
0.6
1251007550250–25–50–75
0.4 150
2.4
TA – Free-Air Temperature – °C
100
’89 VIT+
’89A VIT–
’89 VIT–
’89A VIT+
– Input Threshold Voltage – V
VIT
Figure 8
– Input Threshold Voltage – V
INPUT THRESHOLD VOLTAGE
vs
SUPPLY VOLTAGE
ÎÎÎÎ
’89A VIT–
ÎÎÎ
ÎÎÎ
’89 VIT+
ÎÎÎ
ÎÎÎ
’89 VIT–
ÎÎÎÎ
’89A VIT+
1.8
1.6
1.4
1.2
1
0.8
0.6
0.4
0.2
9876543
010
2
VCC – Supply Voltage – V
2
VIT
Figure 9
Amplitude – V
SN75189
NOISE REJECTION
TA = 25°C
VCC = 5 V
4000100040010040
5
4
3
2
1
010000
6
tw – Pulse Duration – ns
10
ÁÁÁÁ
ÁÁÁÁ
ÎÎÎÎÎ
ÎÎÎÎÎ
CC = 500 pF
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
CC = 10 pF
ÁÁÁÁ
ÁÁÁÁ
CC = 100 pF
ÎÎÎÎÎ
ÎÎÎÎÎ
CC = 300 pF
ÎÎÎÎÎ
See Note A
NOTE A: Maximum amplitude of a positive-going pulse that,
starting from 0 V, will not cause a change in the
output level.
Figure 10
Amplitude – V
SN75189A
NOISE REJECTION
ÎÎÎÎÎ
CC = 300 pF
10 tw – Pulse Duration – ns
6
10000
0
1
2
3
4
5
40 100 400 1000 4000
ÁÁÁÁÁ
ÁÁÁÁÁ
ÎÎÎÎÎ
ÎÎÎÎÎ
CC = 500 pF
ÁÁÁÁ
ÁÁÁÁ
CC = 12 pF
ÁÁÁÁ
ÁÁÁÁ
ÎÎÎÎÎ
ÎÎÎÎÎ
CC = 100 pF
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
VCC = 5 V
TA = 25°C
See Note A
NOTE A: Maximum amplitude of a positive-going pulse that,
starting from 0 V, will not cause a change in the
output level.
Data for free-air temperatures below 0°C and above 70°C are applicable to SN55189 and SN55189A circuits only.
MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCT OBER 1998
9
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
II – Input Current – mA
INPUT CURRENT
vs
INPUT VOLTAGE
8
6
4
2
0
–2
–4
–6
–8
20151050–5–10–15–20
–10 25
10
VI – Input Voltage – V
–25
ÁÁÁÁ
II
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
VCC = 5 V
Control Open
TA = 25°C
Figure 11
PACKAGE OPTION ADDENDUM
www.ti.com 5-Sep-2011
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
5962-86888022A ACTIVE LCCC FK 20 1 TBD Call TI Call TI
5962-8688802CA ACTIVE CDIP J 14 1 TBD Call TI Call TI
5962-8688802DA ACTIVE CFP W 14 1 TBD Call TI Call TI
MC1489AN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
MC1489ANE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
MC1489N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
MC1489NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
SN55189AJ ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
SN55189J OBSOLETE CDIP J 14 TBD Call TI Call TI
SN75189AD ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN75189ADE4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN75189ADG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN75189ADR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN75189ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN75189ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN75189AN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
SN75189ANE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
SN75189ANSLE OBSOLETE SO NS 14 TBD Call TI Call TI
SN75189ANSR ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN75189ANSRG4 ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN75189D ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN75189DE4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 5-Sep-2011
Addendum-Page 2
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
SN75189DG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN75189DR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN75189DRE4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN75189DRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN75189N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
SN75189NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
SN75189NSR ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN75189NSRE4 ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN75189NSRG4 ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SNJ55189AFK ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
SNJ55189AJ ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
SNJ55189AW ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type
SNJ55189FK OBSOLETE LCCC FK 20 TBD Call TI Call TI
SNJ55189J OBSOLETE CDIP J 14 TBD Call TI Call TI
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
PACKAGE OPTION ADDENDUM
www.ti.com 5-Sep-2011
Addendum-Page 3
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF SN55189, SN55189A, SN75189, SN75189A :
Catalog: SN75189, SN75189A
Military: SN55189, SN55189A
NOTE: Qualified Version Definitions:
Catalog - TI's standard catalog product
Military - QML certified for Military and Defense Applications
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
SN75189ADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
SN75189ADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
SN75189ANSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
SN75189DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
SN75189NSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 14-Jul-2012
Pack Materials-Page 1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
SN75189ADR SOIC D 14 2500 367.0 367.0 38.0
SN75189ADR SOIC D 14 2500 333.2 345.9 28.6
SN75189ANSR SO NS 14 2000 367.0 367.0 38.0
SN75189DR SOIC D 14 2500 367.0 367.0 38.0
SN75189NSR SO NS 14 2000 367.0 367.0 38.0
PACKAGE MATERIALS INFORMATION
www.ti.com 14-Jul-2012
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All
semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time
of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated