Data Brief
For further information contact your local STMicroelectronics sales office.
December 2007 Rev 1 1/4
4
STEVAL-ISA030V1
6 W 3-phase SMPS for metering evaluation board
based on ESBT®
Features
Input voltage: 150 VDC - 850 VDC
Output power: 6 W
Output voltage: CH1: 14 V / 430 mA
Switching frequency: >30 kHz
Efficiency: >80%
Feedback: primary regulation
Description
The STEVAL-ISA030V1 evaluation board is a
complete solution for a 5 W single output SMPS,
the type widely used as a power supply in
metering applications. The design is based
primarily on ST’s L6565 PWM driver and the
STC04IE170HP as the main switch. The design
method can also be applied to an SMPS designed
for other applications which work on a three-
phase mains, and can easily be upgraded for
higher output power.
STEVAL-ISA030V1
www.st.com
Board schematic STEVAL-ISA030V1
2/4
1 Board schematic
Figure 1. Schematic
U1
L6565
Vff
3
Vcc 8
COMP
2
CS
4ZCD 5
GND 6
GD 7
INV
1
R24
2.2K/ 1206
R2
100K/ 1206
F1
TR5FUSE
1 2
M600X
L1
R1
100K /1206
R18
22K
R13
22/ 1206
R6
1/ 1/8W
R8
47k/ 1/8W
R11
1.5K/ 1/8W
R15
1. 2K / 1/8W
R17
4. 7K / 1/8W
R14
11K/ 1/8W
R21
2.4K/ 1/8W
C8
3.3nF
C710nF
D3
STPS3L60U
A C
+
C1
330uF/25V
D6
LL4148AC
D7
LL4148
AC
CSM 2010-104
T1
77
2
2
1
1
3
3
4
4
66
R23
4. 7/ 1/4W
ISO1
H11A817
12
43
Q1
STC04IE170HP
4
13
2
14V @ 0.43A
D1 STTH112U
A C
D2 STTH112U
AC
U2
TL431_ARC
A C
R
D4 STTH112U
A C
D5
STTH112U
AC
J1
Phoenix 3 pin
1
2
3J2
Phoenix 2 pin
1
2
27T 9T
35T
48T
R12
10/ 1206
+
C2
33uF/450V
+
C3
33uF/450V
+
C4
33uF/450V
C6
10nF
C5
.0022uF
Y1 cap
R9
100K/ 1206
R10
100K/1206
C9
4.7nF
R22 330
R3
100K/ 1206
R7
100K/ 1206
+
C10
47uF/25V
+
C11
22uF/25V
R5
1M
R4
1M
STEVAL-ISA030V1 Revision history
3/4
2 Revision history
Table 1. Document revision history
Date Revision Changes
06-Dec-2007 1 Initial release.
STEVAL-ISA030V1
4/4
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, an
y
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com