SN55451B, SN55452B, SN55453B, SN55454B SN75451B, SN75452B, SN75453B, SN75454B DUAL PERIPHERAL DRIVERS SLRS021B - DECEMBER 1976 - REVISED SEPTEMBER 1999 D D D D D D D D D Characterized for Use to 300 mA High-Voltage Outputs No Output Latch-Up at 20 V (After Conducting 300 mA) High-Speed Switching Circuit Flexibility for Varied Applications TTL-Compatible Diode-Clamped Inputs Standard Supply Voltages Plastic DIP (P) With Copper Lead Frame Provides Cooler Operation and Improved Reliability Package Options Include Plastic Small-Outline Packages, Ceramic Chip Carriers, and Standard Plastic and Ceramic 300-mil DIPs SN55451B, SN55452B, SN55453B, SN55454B . . . JG PACKAGE SN75451B, SN75452B, SN75453B, SN75454B . . . D OR P PACKAGE (TOP VIEW) 1A 1B 1Y GND PACKAGES SN55451B AND FK, JG SN55452B NAND SN55453B OR SN55454B NOR JG SN75451B AND D, P SN75452B NAND D, P SN75453B OR D, P SN75454B NOR D, P 7 3 6 4 5 VCC 2B 2A 2Y (TOP VIEW) NC 1B NC 1Y NC 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 NC 2B NC 2A NC NC GND NC 2Y NC LOGIC OF COMPLETE CIRCUIT 8 2 SN55451B, SN55452B SN55453B, SN55454B . . . FK PACKAGE SUMMARY OF DEVICES DEVICE 1 NC 1A NC VCC NC PERIPHERAL DRIVERS FOR HIGH-CURRENT SWITCHING AT VERY HIGH SPEEDS NC - No internal connection JG FK, JG description The SN55451B through SN55454B and SN75451B through SN75454B are dual peripheral drivers designed for use in systems that employ TTL logic. This family is functionally interchangeable with and replaces the SN75450 family and the SN75450A family devices manufactured previously. The speed of the devices is equal to that of the SN75450 family, and the parts are designed to ensure freedom from latch-up. Diode-clamped inputs simplify circuit design. Typical applications include high-speed logic buffers, power drivers, relay drivers, lamp drivers, MOS drivers, line drivers, and memory drivers. The SN55451B/SN75451B, SN55452B/SN75452B, SN55453B/SN75453B, and SN55454B/SN75454B are dual peripheral AND, NAND, OR, and NOR drivers, respectively (assuming positive logic), with the output of the logic gates internally connected to the bases of the npn output transistors. The SN55' drivers are characterized for operation over the full military range of - 55C to 125C. The SN75' drivers are characterized for operation from 0C to 70C. Copyright 1999, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 SN55451B, SN55452B, SN55453B, SN55454B SN75451B, SN75452B, SN75453B, SN75454B DUAL PERIPHERAL DRIVERS SLRS021B - DECEMBER 1976 - REVISED SEPTEMBER 1999 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) SN55' Supply voltage, VCC (see Note 1) SN75' UNIT 7 7 V Input voltage, VI 5.5 5.5 V Inter-emitter voltage (see Note 2) 5.5 5.5 V Off-state output voltage, VO 30 30 V Continuous collector or output current, IOK (see Note 3) 400 400 mA Peak collector or output current, II (tw 10 ms, duty cycle 50%, see Note 4) 500 500 mA Continuous total power dissipation See Dissipation Rating Table Operating free-air temperature range, TA Storage temperature range, Tstg - 55 to 125 0 to 70 C - 65 to 150 - 65 to 150 C Case temperature for 60 seconds FK package 260 C Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds JG package 300 C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds D or P package NOTES: 1. 2. 3. 4. C 260 Voltage values are with respect to network GND, unless otherwise specified. This is the voltage between two emitters of a multiple-emitter transistor. This value applies when the base-emitter resistance (RBE) is equal to or less than 500 . Both halves of these dual circuits may conduct rated current simultaneously; however, power dissipation averaged over a short time interval must fall within the continuous dissipation rating. DISSIPATION RATING TABLE PACKAGE TA 25C POWER RATING DERATING FACTOR ABOVE TA = 25C TA = 70C POWER RATING TA = 125C POWER RATING D 725 mW 5.8 mW/C 464 mW -- FK 1375 mW 11.0 mW/C 880 mW 275 mW JG 1050 mW 8.4 mW/C 672 mW 210 mW P 1000 mW 8.0 mW/C 640 mW -- recommended operating conditions SN55' Supply voltage, VCC High-level input voltage, VIH NOM MAX MIN NOM MAX 4.5 5 5.5 4.75 5 5.25 2 Low-level input voltage, VIL 2 0.8 Operating free-air temperature, TA 2 SN75' MIN - 55 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 125 0 UNIT V V 0.8 V 70 C SN55451B, SN55452B, SN55453B, SN55454B SN75451B, SN75452B, SN75453B, SN75454B DUAL PERIPHERAL DRIVERS SLRS021B - DECEMBER 1976 - REVISED SEPTEMBER 1999 logic symbol 1A 1B 2A 2B logic diagram (positive logic) 1 & 2 3 6 5 7 1Y 1A B Y L L L (on state) L H L (on state) H L L (on state) H H H (off state) 2Y 7 2B 4 GND schematic (each driver) FUNCTION TABLE (each driver) A 5 6 2A This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC publication 617-12. Pin numbers shown are for the D, JG, and P packages. 1Y 2 1B 2Y 3 1 VCC 4 k 130 1.6 k Y A positive logic: Y = AB or A+B B 500 1 k GND Resistor values shown are nominal. electrical characteristics over recommended operating free-air temperature range PARAMETER VIK Input clamp voltage VOL Low level output voltage Low-level IOH High level output current High-level II IIH Input current at maximum input voltage IIL ICCH Low-level input current TEST CONDITIONS VCC = MIN, VCC = MIN, IOL = 100 mA II = - 12 mA VIL = 0.8 V, VCC = MIN, IOL = 300 mA VIL = 0.8 V, VCC = MIN, VOH = 30 V VIH = MIN, VCC = MAX, VCC = MAX, VI = 5.5 V VI = 2.4 V VCC = MAX, VCC = MAX, VI = 0.4 V VI = 5 V SN55451B TYP MAX MIN SN75451B TYP MAX MIN - 1.2 - 1.5 - 1.2 - 1.5 0 25 0.25 05 0.5 0 25 0.25 04 0.4 05 0.5 08 0.8 05 0.5 07 0.7 UNIT V V 300 100 A 1 1 mA 40 A - 1.6 mA 7 11 mA ICCL Supply current, outputs low VCC = MAX, VI = 0 52 65 52 For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. All typical values are at VCC = 5 V, TA = 25C. 65 mA High-level input current Supply current, outputs high 40 -1 - 1.6 -1 7 11 switching characteristics, VCC = 5 V, TA = 25C PARAMETER TEST CONDITIONS tPLH tPHL Propagation delay time, low-to-high-level output tTLH tTHL Transition time, low-to-high-level output VOH Propagation delay time, high-to-low-level output IO 200 mA, RL = 50 , CL = 15 pF, See Figure 1 VS = 20 V,, See Figure 2 IO 300 mA,, MIN Transition time, high-to-low-level output High level output voltage after switching High-level SN55451B SN75451B POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TYP MAX 18 25 18 25 5 8 7 12 VS - 6.5 VS - 6.5 UNIT ns mV 3 SN55451B, SN55452B, SN55453B, SN55454B SN75451B, SN75452B, SN75453B, SN75454B DUAL PERIPHERAL DRIVERS SLRS021B - DECEMBER 1976 - REVISED SEPTEMBER 1999 logic symbol 1A 1B 2A 2B logic diagram (positive logic) 1 & 2 3 6 5 7 1A 1Y 5 6 2A 4 This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC publication 617-12. GND schematic (each driver) Pin numbers shown are for the D, JG, and P packages. FUNCTION TABLE (each driver) B 2Y 7 2B A 1Y 2 1B 2Y 3 1 VCC 1.6 k 1.6 k 4 k 130 Y L L H (off state) L H H (off state) H L H (off state) H H L (on state) Y A B 500 1 k 1 k positive logic: Y = AB or A+B GND Resistor values shown are nominal. electrical characteristics over recommended operating free-air temperature range TEST CONDITIONS PARAMETER VIK VOL Input clamp voltage Low level output voltage Low-level IOH High level output current High-level II IIH Input current at maximum input voltage IIL ICCH Low-level input current High-level input current SN55452B MIN TYP MAX SN75452B MIN TYP MAX UNIT V VCC = MIN, II = - 12 mA - 1.2 - 1.5 - 1.2 - 1.5 VCC = MIN,, IOL = 100 mA VIH = MIN,, 0 25 0.25 05 0.5 0 25 0.25 04 0.4 VCC = MIN,, IOL = 300 mA VIH = MIN,, 05 0.5 08 0.8 05 0.5 07 0.7 VCC = MIN,, VOH = 30 V VIL = 0.8 V,, VCC = MAX, VCC = MAX, VI = 5.5 V VI = 2.4 V VCC = MAX, VCC = MAX, VI = 0.4 V VI = 0 V 100 A 1 1 mA 40 40 A 300 - 1.1 - 1.6 - 1.1 - 1.6 mA 11 14 11 14 mA ICCL Supply current, outputs low VCC = MAX, VI = 5 V 56 71 56 For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. All typical values are at VCC = 5 V, TA = 25C. 71 mA Supply current, outputs high switching characteristics, VCC = 5 V, TA = 25C PARAMETER TEST CONDITIONS tPLH tPHL Propagation delay time, low-to-high-level output tTLH tTHL Transition time, low-to-high-level output VOH 4 Propagation delay time, high-to-low-level output IO 200 mA, RL = 50 , CL = 15 pF, See Figure 1 VS = 20 V,, See Figure 2 IO 300 mA,, MIN Transition time, high-to-low-level output High level output voltage after switching High-level SN55452B SN75452B POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TYP MAX 26 35 24 35 5 8 7 12 VS - 6.5 VS - 6.5 UNIT ns mV SN55451B, SN55452B, SN55453B, SN55454B SN75451B, SN75452B, SN75453B, SN75454B DUAL PERIPHERAL DRIVERS SLRS021B - DECEMBER 1976 - REVISED SEPTEMBER 1999 logic symbol 1A 1B 2A 2B logic diagram (positive logic) 1 1 2 3 1A 1Y 1B 6 5 7 2Y 2A 2B This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC publication 617-12. Pin numbers shown are for the D, JG, and P packages. B Y L L L (on state) L H H (off state) H L H (off state) H H H (off state) 1Y 2 5 6 2Y 7 4 GND schematic (each driver) VCC FUNCTION TABLE (each driver) A 3 1 4 k 4 k 1.6 k 130 Y A B positive logic: Y = A+B or A B 500 1 k GND Resistor values shown are nominal. electrical characteristics over recommended operating free-air temperature range PARAMETER VIK VOL Input clamp voltage Low level output voltage Low-level IOH High level output current High-level II IIH Input current at maximum input voltage IIL ICCH Low-level input current TEST CONDITIONS VCC = MIN, VCC = MIN,, IOL = 100 mA SN55453B MIN TYP MAX SN75453B MIN TYP MAX UNIT - 1.2 - 1.5 - 1.2 - 1.5 V 0 25 0.25 05 0.5 0 25 0.25 04 0.4 05 0.5 08 0.8 05 0.5 07 0.7 II = - 12 mA VIL = 0.8 V, VCC = MIN,, IOL = 300 mA VIL = 0.8 V, VCC = MIN,, VOH = 30 V VIH = MIN,, VCC = MAX, VCC = MAX, VI = 5.5 V VI = 2.4 V VCC = MAX, VCC = MAX, VI = 0.4 V VI = 5 V V 300 100 A 1 1 mA 40 A -1 - 1.6 -1 - 1.6 mA 8 11 8 11 mA ICCL Supply current, outputs low VCC = MAX, VI = 0 54 68 54 For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. All typical values are at VCC = 5 V, TA = 25C. 68 mA High-level input current Supply current, outputs high 40 switching characteristics, VCC = 5 V, TA = 25C PARAMETER TEST CONDITIONS tPLH tPHL Propagation delay time, low-to-high-level output tTLH tTHL Transition time, low-to-high-level output VOH High level output voltage after switching High-level Propagation delay time, high-to-low-level output IO 200 mA,, RL = 50 , MIN CL = 15 pF,, See Figure 1 Transition time, high-to-low-level output SN55453B SN75453B POST OFFICE BOX 655303 VS = 20 V, See Figure 2 IO 300 mA, * DALLAS, TEXAS 75265 TYP MAX 18 25 18 25 5 8 7 12 VS - 6.5 VS - 6.5 UNIT ns mV 5 SN55451B, SN55452B, SN55453B, SN55454B SN75451B, SN75452B, SN75453B, SN75454B DUAL PERIPHERAL DRIVERS SLRS021B - DECEMBER 1976 - REVISED SEPTEMBER 1999 logic symbol 1A 1B 2A 2B logic diagram (positive logic) 1 1 2 3 6 5 7 1A 1Y B Y L L H (off state) L H L (on state) H L L (on state) H H L (on state) 2Y 7 2B 4 GND schematic (each driver) FUNCTION TABLE (each driver) A 5 6 2A This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC publication 617-12. Pin numbers shown are for the D, JG, and P packages. 1Y 2 1B 2Y 3 1 2 k 4 k 4 k VCC 2 k 1.6 k 130 Y A B 500 1 k 1 k positive logic: Y = A+B or AB GND Resistor values shown are nominal. electrical characteristics over recommended operating free-air temperature range TEST CONDITIONS PARAMETER VIK VOL Input clamp voltage Low level output voltage Low-level IOH High level output current High-level II IIH Input current at maximum input voltage High-level input current IIL Low-level input current ICCH Supply current, outputs high SN55454B TYP MAX MIN SN75454B TYP MAX MIN VCC = MIN, II = - 12 mA - 1.2 - 1.5 - 1.2 - 1.5 VCC = MIN,, IOL = 100 mA VIH = MIN,, 0 25 0.25 05 0.5 0 25 0.25 04 0.4 VCC = MIN,, IOL = 300 mA VIH = MIN,, 05 0.5 08 0.8 05 0.5 07 0.7 VCC = MIN,, VOH = 30 V VIL = 0.8 V,, VCC = MAX, VCC = MAX, VI = 5.5 V VI = 2.4 V VCC = MAX, VCC = MAX, VI = 0.4 V VI = 0 UNIT V V 100 A 1 1 mA 40 40 A 300 -1 - 1.6 -1 - 1.6 mA 13 17 13 17 mA ICCL Supply current, outputs low VCC = MAX, VI = 5 V 61 79 61 For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. All typical values are at VCC = 5 V, TA = 25C. 79 mA switching characteristics, VCC = 5 V, TA = 25C PARAMETER TEST CONDITIONS tPLH tPHL Propagation delay time, low-to-high-level output tTLH tTHL Transition time, low-to-high-level output VOH 6 Propagation delay time, high-to-low-level output IO 200 mA,, RL = 50 , CL = 15 pF,, See Figure 1 VS = 20 V, See Figure 2 IO 300 mA, MIN Transition time, high-to-low-level output High level output voltage after switching High-level SN55454B SN75454B POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TYP MAX 27 35 24 35 5 8 7 12 VS - 6.5 VS - 6.5 UNIT ns mV SN55451B, SN55452B, SN55453B, SN55454B SN75451B, SN75452B, SN75453B, SN75454B DUAL PERIPHERAL DRIVERS SLRS021B - DECEMBER 1976 - REVISED SEPTEMBER 1999 PARAMETER MEASUREMENT INFORMATION 10 ns 5 ns Input 10 V 2.4 V 90% Input '451B '453B RL = 50 '451B '452B 1.5 V 1.5 V 10% Output Pulse Generator (see Note A) '453B '454B GND 0V 10 ns 3V Input '452B '454B 90% 90% 1.5 V 1.5 V 10% CL = 15 pF (see Note B) SUB 10% 0.5 s 5 ns Circuit Under Test 10% tPHL 0V tPLH 90% 90% 50% 10% Output 0.4 V 3V 90% VOH 50% 10% VOL TEST CIRCUIT tTHL tTLH VOLTAGE WAVEFORMS NOTES: A. The pulse generator has the following characteristics: PRR 1 MHz, ZO = 50 . B. CL includes probe and jig capacitance. Figure 1. Test Circuit and Voltage Waveforms, Complete Drivers 5 ns VS = 20 V 10 ns 90% Input 2.4 V '451B '452B Input '451B '453B 2 mH 5V 90% 1.5 V 1.5 V 10% 65 1N3064 Input '452B '454B Circuit Under Test 10% 40 s 5 ns Output Pulse Generator (see Note A) CL = 15 pF (see Note B) 3V 90% 1.5 V 10% 0V 10 ns 3V 90% 1.5 V 10% 0V VOH '453B '454B GND SUB Output VOL 0.4 V TEST CIRCUIT VOLTAGE WAVEFORMS NOTES: A. The pulse generator has the following characteristics: PRR 12.5 kHz, ZO = 50 . B. CL includes probe and jig capacitance. Figure 2. Test Circuit and Voltage Waveforms for Latch-Up Test of Complete Drivers POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 7 SN55451B, SN55452B, SN55453B, SN55454B SN75451B, SN75452B, SN75453B, SN75454B DUAL PERIPHERAL DRIVERS SLRS021B - DECEMBER 1976 - REVISED SEPTEMBER 1999 TYPICAL CHARACTERISTICS VCE(sat) VCE(sat) - Collector-Emitter Saturation Voltage - V TRANSISTOR COLLECTOR-EMITTER SATURATION VOLTAGE vs COLLECTOR CURRENT 0.6 0.5 IC = 10 IB See Note A 0.4 TA = 70C 0.3 TA = 0C 0.2 0.1 TA = 25C 0 10 20 40 70 100 200 IC - Collector Current - mA 400 NOTE A: These parameters must be measured using pulse techniques, tw = 300 s, duty cycle 2%. Figure 3 8 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 25-Sep-2013 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (C) Device Marking (3) (4/5) 5962-9563301Q2A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 59629563301Q2A SNJ55 453BFK 5962-9563301QPA ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 9563301QPA SNJ55453B 77049012A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 77049012A SNJ55 452BFK 7704901PA ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 7704901PA SNJ55452B 77049022A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 77049022A SNJ55 451BFK 7704902PA ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 7704902PA SNJ55451B JM38510/12902BPA ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 JM38510 /12902BPA JM38510/12903BPA ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 JM38510 /12903BPA JM38510/12905BPA ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 JM38510 /12905BPA M38510/12902BPA ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 JM38510 /12902BPA M38510/12903BPA ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 JM38510 /12903BPA M38510/12905BPA ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 JM38510 /12905BPA SN55451BJG ACTIVE CDIP JG 8 50 TBD A42 N / A for Pkg Type -55 to 125 SN55451BJG SN55452BJG ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 SN55452BJG SN55453BJG ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 SN55453BJG SN55454BJG ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 SN55454BJG Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 25-Sep-2013 Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (C) Device Marking (3) (4/5) SN75451BD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 75451B SN75451BDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 75451B SN75451BDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 75451B SN75451BDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 75451B SN75451BDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 75451B SN75451BDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 75451B SN75451BP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type 0 to 70 SN75451BP SN75451BPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type 0 to 70 SN75451BP SN75451BPSR ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 A451B SN75451BPSRE4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 A451B SN75451BPSRG4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 A451B SN75452BD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 75452B SN75452BDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 75452B SN75452BDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 75452B SN75452BDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 75452B SN75452BDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 75452B SN75452BDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 75452B SN75452BP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type 0 to 70 SN75452BP Addendum-Page 2 Samples PACKAGE OPTION ADDENDUM www.ti.com 25-Sep-2013 Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (C) Device Marking (3) (4/5) SN75452BPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type 0 to 70 SN75452BP SN75452BPSR ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 A452B SN75452BPSRE4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 A452B SN75452BPSRG4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 A452B SN75453BD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 75453B SN75453BDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 75453B SN75453BDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 75453B SN75453BDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 75453B SN75453BDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 75453B SN75453BDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 75453B SN75453BP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type 0 to 70 SN75453BP SN75453BPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type 0 to 70 SN75453BP SN75453BPSR ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 A453B SN75453BPSRE4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 A453B SN75453BPSRG4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 A453B SN75454BD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 75454B SN75454BDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 75454B SN75454BDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 75454B Addendum-Page 3 Samples PACKAGE OPTION ADDENDUM www.ti.com 25-Sep-2013 Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (C) Device Marking (3) (4/5) SN75454BDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 75454B SN75454BDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 75454B SN75454BDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 75454B SN75454BP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type 0 to 70 SN75454BP SN75454BPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type 0 to 70 SN75454BP SN75454BPSR ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 A454B SN75454BPSRE4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 A454B SN75454BPSRG4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 A454B SNJ55451BFK ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 77049022A SNJ55 451BFK SNJ55451BJG ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 7704902PA SNJ55451B SNJ55452BFK ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 77049012A SNJ55 452BFK SNJ55452BJG ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 7704901PA SNJ55452B SNJ55453BFK ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 59629563301Q2A SNJ55 453BFK SNJ55453BJG ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 9563301QPA SNJ55453B SNJ55454BFK ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 SNJ55 454BFK SNJ55454BJG ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 SNJ55 454BJG Addendum-Page 4 Samples PACKAGE OPTION ADDENDUM www.ti.com 25-Sep-2013 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF SN55451B, SN55452B, SN55453B, SN55454B, SN75451B, SN75452B, SN75453B, SN75454B : * Catalog: SN75451B, SN75452B, SN75453B, SN75454B * Military: SN55451B, SN55452B, SN55453B, SN55454B NOTE: Qualified Version Definitions: Addendum-Page 5 PACKAGE OPTION ADDENDUM www.ti.com 25-Sep-2013 * Catalog - TI's standard catalog product * Military - QML certified for Military and Defense Applications Addendum-Page 6 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device SN75451BDR Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 SN75451BPSR SO PS 8 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1 SN75452BDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 SN75452BPSR SO PS 8 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1 SN75453BDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 SN75453BPSR SO PS 8 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1 SN75454BDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 SN75454BPSR SO PS 8 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN75451BDR SOIC D 8 2500 340.5 338.1 20.6 SN75451BPSR SO PS 8 2000 367.0 367.0 38.0 SN75452BDR SOIC D 8 2500 340.5 338.1 20.6 SN75452BPSR SO PS 8 2000 367.0 367.0 38.0 SN75453BDR SOIC D 8 2500 340.5 338.1 20.6 SN75453BPSR SO PS 8 2000 367.0 367.0 38.0 SN75454BDR SOIC D 8 2500 340.5 338.1 20.6 SN75454BPSR SO PS 8 2000 367.0 367.0 38.0 Pack Materials-Page 2 MECHANICAL DATA MCER001A - JANUARY 1995 - REVISED JANUARY 1997 JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE 0.400 (10,16) 0.355 (9,00) 8 5 0.280 (7,11) 0.245 (6,22) 1 0.063 (1,60) 0.015 (0,38) 4 0.065 (1,65) 0.045 (1,14) 0.310 (7,87) 0.290 (7,37) 0.020 (0,51) MIN 0.200 (5,08) MAX Seating Plane 0.130 (3,30) MIN 0.023 (0,58) 0.015 (0,38) 0-15 0.100 (2,54) 0.014 (0,36) 0.008 (0,20) 4040107/C 08/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a ceramic lid using glass frit. Index point is provided on cap for terminal identification. Falls within MIL STD 1835 GDIP1-T8 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2013, Texas Instruments Incorporated