OM1324SMM OM1324NMM OM1324NKM OM1324NTM OM1324STM OM1324N2M 1.5 AMP POSITIVE ADJUSTABLE VOLTAGE REGULATOR APPROVED TO DESC DRAWING 7703405 Three Terminal, Precision Adjustable Positive Voltage Regulator In Hermetic Style Packages (LM117A) Please see mechanical outlines herein FEATURES * * * * * * Similar To Industry Standard LM117A Approved To DESC Standardized Military Drawing Number 7703405 Built In Thermal Overload Protection Short Circuit Current Limiting Available In Six Package Styles Maximum Output Voltage Tolerance Is Guaranteed to + 1% DESCRIPTION These three terminal positive regulators are supplied in hermetically sealed packages. All protective features are designed into the circuit, including thermal shutdown, current-limiting, and safe-area control. With heat sinking, these devices can deliver up to 1.5 amps of output current. The LCC-20 device is limited to .5 amps. The unit also features output voltages that can be fixed from 1.2 volts to 37 volts using external resistors. ABSOLUTE MAXIMUM RATINGS Tc @ 25C Power Dissipation Case 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 W Case-All Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 W Input - Output Voltage Differential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 V Operating Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . - 55C to + 150C Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to + 150C Lead Temperature (Soldering 10 seconds) . . . . . . . . . . . . . . . . . . . . . . . . . . . 300C Thermal Resistance, Junction to Case: Case 2, LCC-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17C/W Case U & M, TO-257 (Isol) and SMD-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2C/W Case T&N, TO-257 (Non-Isol) and SMD-1 . . . . . . . . . . . . . . . . . . . . . . . 3.5C/W Case Y, TO-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0C/W Maximum Output Current: Case 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 A Case-All Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5A Recommended Operating Conditions: Output Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.2 to 37 VDC Ambient Operating Temperature Range (TA). . . . . . . . . . . . . . . . - 55C to + 125C Input Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.25 to 41.25 VDC 4 11 R2 Supersedes 1 07 R1 3.5 - 17 3.5 OM1324NTM, OM1324STM, OM1324NKM, OM1324SMM, OM1324NMM, OM1324N2M ELECTRICAL CHARACTERISTICS -55C TA 125C, IL = 8mA (unless otherwise specified) OM1324NTM, OM1324STM, OM1324NKM, OM1324SMM, OM1324NMM Parameter Symbol Test Conditions Min. Max. Reference Voltage VREF VDIFF = 3.0V, TA = 25C 1.238 1.262 1.225 1.270 1.225 1.270 -4.5 4.5 -9 9 VDIFF = 3.3V VDIFF = 40V Line Regulation RLINE 3.0V VDIFF 40V, Vout = Vref, TA = 25C 3.3V VDIFF 40V, Vout = Vref (Note 1) Load Regulation RLOAD (Note 1) * * * VDIFF = 3.0V, 10mA IL 1.5A, TA = 25C VDIFF = 3.3V, 10mA IL 1.5A * VDIFF = 40V, 10mA IL 300mA, TA = 25C VDIFF = 40V, 10mA IL 195mA Thermal Regulation VRTH * Vin = 14.6V, IL = 1.5A -15 15 -15 15 -15 15 -15 15 -5 5 Unit V mV mV mV Pd = 20 Watts, t = 20 ms, TA = 25C Ripple Rejection f = 120 Hz, Vout = Vref RN * Adjustment Pin Current IAdj VDIFF = 3.0V, TA = 25C VDIFF = 3.3V VDIFF = 40V Adjustment Pin IAdj dB 100 * * VDIFF = 3.0V, 10mA IL 1.5A, TA = 25C VDIFF = 3.3V, 10mA IL 1.5A Current Change VDIFF = 40V, 10mA IL 195mA * 3.0V VDIFF 40V, TA = 25C 3.3V VDIFF 40V Miminum Load Current ILmin * VDIFF = 40V, VOUT = 1.4V (forced) VDIFF = 15V ICL A 100 5 -5 5 -5 5 -5 5 -5 5 -5 VDIFF = 3.0V, VOUT = 1.4V (forced) VDIFF = 3.3V, VOUT = 1.4V (forced) A 5 5.0 * * * VDIFF = 40V, TA = 25C (Note 2) 100 -5 * VDIFF = 40V, 10mA IL 300mA, TA = 25C Current Limit 66 CAdj = 10 F (Note 2) 5.0 mA 5.0 1.5 3.5 0.18 1.5 A Notes: 1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used. Changes in output voltage due to heating effects must be taken into account separately. 2. If not tested, shall be guaranteed to the specified limits. 3. The * denotes the specifications which apply over the full operating temperature range. PART NUMBER DESIGNATOR 3.5 Standard Military Drawing Number Omnirel Part Number 7703405M 7703405U 7703405T 7703405Y 7703405N 77034052 OM1324SMM OM1324STM OM1324NTM OM1324 NKM OM1324NMM OM1324N2M 3.5 - 18 Omnirel Package Designation SMD-3 TO-257 (Isolated) TO-257 (non-Isolated) TO-3 SMD-1 LCC-20 OM1324NTM, OM1324STM, OM1324NKM, OM1324SMM, OM1324NMM, OM1324N2M ELECTRICAL CHARACTERISTICS -55C TA 125C, IL = 8mA (unless otherwise specified) OM1324N2M Parameter Symbol Test Conditions Min. Max. Reference Voltage VREF VDIFF = 3.0V, TA = 25C 1.238 1.262 1.225 1.270 1.225 1.270 -4.5 4.5 -9 9 -15 15 VDIFF = 3.3V VDIFF = 40V Line Regulation RLINE Load Regulation 3.0V VDIFF 40V, Vout = Vref, TA = 25C 3.3V VDIFF 40V, Vout = Vref (Note 1) RLOAD * VDIFF = 3.0V, 10mA IL 500 mA, TA = 25C VDIFF = 3.3V, 10mA IL 500 mA (Note 1) * * * VDIFF = 40V, 10mA IL 150 mA, TA = 25C VDIFF = 40V, 10mA IL 100 mA Thermal Regulation VRTH * Vin = 14.6V, IL = 300 mA -15 15 -15 15 -15 15 -2 2 Unit V mV mV mV Pd = 4.0 Watts, t = 20 ms, TA = 25C Ripple Rejection RN Adjustment Pin Current f = 120 Hz, Vout = Vref IAdj 66 VDIFF = 40V IAdj 100 * * 100 -5 * VDIFF = 40V, 10mA IL 150mA, TA = 25C VDIFF = 40V, 10mA IL 100mA * 3.0V VDIFF 40V, TA = 25C 3.3V VDIFF 40V ILmin VDIFF = 40V, VOUT = 1.4V (forced) Current Limit (Note 2) ICL * 5 -5 5 -5 5 -5 5 -5 5 -5 VDIFF = 15V A 5 VDIFF = 3.0V, VOUT = 1.4V (forced) VDIFF = 3.3V, VOUT = 1.4V (forced) A 100 VDIFF = 3.0V, 10mA IL 500 mA, TA = 25C VDIFF = 3.3V, 10mA IL 500 mA Current Change Miminum Load Current dB VDIFF = 3.0V, TA = 25C VDIFF = 3.3V Adjustment Pin * CAdj = 10 F (Note 2) 5.0 * * * 5.0 mA 5.0 VDIFF = 40V, TA = 25C 0.5 1.65 0.15 0.65 A Notes: 1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used. Changes in output voltage due to heating effects must be taken into account separately. 2. If not tested, shall be guaranteed to the specified limits. 3. The * denotes the specifications which apply over the full operating temperature range. APPLICATION Vout Vin * Cin is required if regulator is located an appreciable distance from power supply filter. ** Co is not needed for stability, however it does improve transient response. R Vout = 1.25 V (1 + 2 )+ IAd j R2 R1 Since IAdj is controlled to less than 100 A, the error associated with this term is negligible in most applications. 3.5 - 19 OM1324STM R1 240 IAdj Adjust Cin* 0.1 F R2 3.5 OM1324NTM, OM1324STM, OM1324NKM, OM1324SMM, OM1324NMM, OM1324N2M MECHANICAL OUTLINE .425O .200O .190O 1 O .045O .035O .100O .200O 3 O .420O .410O .425O .035 WIDEO FLAT 3 PLCS.O 2 .665O .645O .150O .140O O .537O .527O .350 MIN.O .430O .410O 1 2 3 O .020O .115O .160O .020O .080 O .038 MAX.O OM1324SMM .750O .500O .120 TYP.O .100 TYP.O .035O .025O Front View Pin 1 - Adjust Pin 2 - Input Pin 3 - Output Case - Isolated O .005O OM1324STM Isolated OM1324NTM Non-Isolated Front View Pin 1 - Adjust Pin 2 - Output Pin 3 - Input Tab - Isolated Front View Pin 1 - Adjust Pin 2 - Output Pin 3 - Input Tab - Output .140 .015 .140 .140 1 2 .075 .075 .157 .415 3 .062 .375 .030 MIN. OM1324NMM Pin 1 - Adjust Pin 2 - Input Pin 3 - Output 1.197 1.53 REF. 1.177 0.875 MAX. 0.675 0.655 0.188 R. MAX. 0.135 MAX. .020 X45 REF. (.003) 0.450 0.250 0.043 0.038 .040 .075 (.010) TYP. 4 .010 3 .025 TYP. 2 1 9 .160 SQ. REF. 1 .085 0.312 MIN. SEATING PLANE .009 R. 20 PLCS. .065 0.440 0.420 13 19 0.225 0.205 2 PLCS. 0.161 0.151 0.525 R. MAX. .003 .025 SQ. TYP. 18 14 .050 TYP. .050 (.005) TYP. .040 X45 REF (3 PL) OM1324N2M 3.5 OM1324NKM Pin 1 - Adjust Pin 2 - Input Case - Output Pin 1 VOUT(Sense) Pin 2 NC Pin 3 NC Pin 4 NC Pin 5 VIN Pin 6 NC Pin 7 NC Pin 8 NC Pin 9 NC Pin 10 ADJUST Pin 11 Pin 12 Pin 13 Pin 14 Pin 15 Pin 16 Pin 17 Pin 18 Pin 19 Pin 20 For additional information please see the mechanical outline section. NC NC NC NC NC NC NC NC NC VOUT