3M Pak 100 Board to Wire Connectors .100 x .100 Mating and Accessory Charts Pak 100 Latch/Ejector Headers Mating Chart Pin1 Qty 3 Wall2 TS0771 Pak 100 L/E Header Part Number Condo Header Compliant 4 Wall2 TS0773 Pin TS0772 TS0774 TS0478 Pinless TS0161 10 3793 3793 N4610 14 3314 3314 N4614 16 3408 3408 N4616 20 3428 3428 6420 N4620 6426 N4626 3627 24 3429 26 3429 3440 30 1 2 Mating Connectors Surface Mount TS0168 34 3431 3431 6434 N4634 40 3432 3432 6440 N4640 50 3433 3433 6450 N4650 60 3372 3372 64 3764 3764 N4660 Pak 100, Wiremount Socket2 3473-XXXX CHG-2010-X01010-KXP 89110-0XXX 3385-XXXX CHG-2014-X01010-KXP 89114-0XXX 3452-XXXX CHG-2016-X01010-KXP 89116-0XXX 3421-XXXX CHG-2020-X01010-KXP 89120-0XXX 3626-XXXX CHG-2024-X01010-KXP 89124-0XXX 3399-XXXX CHG-2026-X01010-KXP 89126-0XXX 3419-XXXX CHG-2030-X01010-KXP 89130-0XXX 3414-XXXX CHG-2034-X01010-KXP 89134-0XXX 3417-XXXX CHG-2040-X01010-KXP 89140-0XXX 3425-XXXX CHG-2050-X01010-KXP 89150-0XXX 3334-XXXX CHG-2060-X01010-KXP 89160-0XXX 7964-6500EC CHG-2064-X01010-KXP Double the pin quantity for 3 and 4 wall right angle, stacked headers. Stacked headers mate only to the wiremount sockets. Use polarized versions of the CHG, either CHG-20XX-J01010-KXP or CHG-20XX-S01010-KXP. Pak 100 Latch/Ejector Headers Accessories Pak 100, L/E Header Part Number Pin1 Qty 10 14 16 20 24 26 30 34 40 50 60 64 1 2 3 Wall2 TS0771 Condo Hdr TS0773 TS0774 4 Wall2 TS0772 3793 3314 3408 3428 3429 3431 3432 3433 3372 3764 Compliant Pin TS0478 3793 3314 3408 3428 3627 3429 3440 3431 3432 3433 3372 3764 Accessories Pinless TS0161 Surface Mount TS0168 6420 N4610 N4614 N4616 N4620 6426 N4626 6434 6440 6450 N4634 N4640 N4650 N4660 Socket Polarizing Key For All Headers use 35182 Latch/Ejectors For Surface Mo nt use Mount se N3505-22 N3505-23 N3505 23 and for all other use 3505 302 3505-30 3505-312 3505-4 Board Polarizing Post Mounting Hardware TS0162 For All Headers use 3201 32 3201-3 For Surface Mount use 3341 6 3341-6 and for all other use 3341-5 33 5 3341-6 Double the pin quantity for three and four wall right angle, stacked headers. These headers are available in High temperature (PCT) plastic. Use a 'N' prefix on the header part numbers. Use the Socket Polarizing Key 3518, the Latches N3505-30 or N3505-31, and the Board Polarization Post 3201-4. 3 Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373