TM241C24T - SCHNEIDER ELECTRIC

The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.

This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.

It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.

Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.

Aug 28, 2015

Product data sheet

Characteristics

TM241C24T

controller M241 24 IO transistor PNP

Main

Commercial Status Commercialised

Range of product Modicon M241

Product or component

type

Logic controller

Discrete input number 14 discrete input including 8 fast input conforming to IEC

61131-2 Type 1

Discrete output type Transistor

Discrete output number 10 transistor including 4 fast output

Discrete output voltage 24 V DC for transistor output

Discrete output current 0.1 A with Q0...Q3 terminal(s) for fast output (PTO mode)

0.5 A with Q0...Q9 terminal(s) for transistor output

[Us] rated supply

voltage

24 V DC

Complementary

Discrete I/O number 24

Discrete input logic Sink or source

Discrete input voltage 24 V

Discrete input voltage type DC

Voltage state1 guaranteed >= 15 V for input

Current state 1 guaranteed >= 5 mA for fast input

>= 2.5 mA for input

Voltage state 0 guaranteed <= 5 V for input

Current state 0 guaranteed <= 1.5 mA for fast input

<= 1 mA for input

Discrete input current 10.7 mA for fast input

5 mA for input

Input impedance 2.81 kOhm for fast input

4.7 kOhm for input

Response time <= 2 µs turn-off operation with Q0...Q3 terminal(s) for fast output

<= 2 µs turn-on operation with Q0...Q3 terminal(s) for fast output

<= 250 µs turn-off operation with Q0...Q9 terminal(s) for output

<= 34 µs turn-on operation with Q0...Q9 terminal(s) for output

<= 2 µs turn-off operation with I0...I7 terminal(s) for fast input

<= 2 µs turn-on operation with I0...I7 terminal(s) for fast input

50 µs turn-off operation with I0...I13 terminal(s) for input

50 µs turn-on operation with I0...I13 terminal(s) for input

Configurable filtering time 12 ms for input

4 ms for input

1 ms for input

0 ms for input

12 ms for fast input

1 µs for fast input

Number of I/O expansion module 14 (remote I/O architecture)

7 (local I/O architecture)

Discrete output logic Positive logic (source)

Output voltage limits 30 V

Output frequency <= 1 kHz for output

<= 100 kHz for fast output (PLS mode)

<= 20 kHz for fast output (PWM mode)

Accuracy +/- 1 % at 100 Hz...1 kHz for fast output

+/- 0.1 % at 20...100 Hz for fast output

Leakage current <= 5 µA for output

Voltage drop <= 1 V

Tungsten load <= 2.4 W

Protection type Reverse polarity protection for fast output

Short-circuit and overload protection with automatic reset

Short-circuit protection

Reset time 12 s fast output

10 ms output

Current per output common 1 A with Q8...Q9 terminal for output

2 A with Q4...Q7 terminal for output

2 A with Q0...Q3 terminal for fast output

Execution time for 1 KInstruction 0.7 ms for other instruction

0.3 ms for event and periodic task

Memory capacity 64 MB for system memory RAM

8 MB for program

Data backed up 128 MB built-in flash memory for backup of user programs

Data storage equipment <= 32 GB SD card optional

Battery type BR2032 lithium non-rechargeable, battery life: 4 yr

Backup time 2 years at 25 °C

Application structure 8 event tasks

4 cyclic master tasks

3 cyclic master tasks + 1 freewheeling task

8 external event tasks

Realtime clock With

Clock drift <= 60 s/month at 25 °C

Positioning functions PWM/PTO function 4 channel(s) (positioning frequency: 100 kHz)

Control signal type Single phase signal at 200 kHz for fast input (HSC mode)

Pulse/Direction signal at 200 kHz for fast input (HSC mode)

A/B signal at 100 kHz for fast input (HSC mode)

Counting input number 4 fast input (HSC mode)

Integrated connection type USB port with connector mini B USB 2.0

Non isolated serial link "serial 2" with connector removable screw terminal block and

interface RS485

Non isolated serial link "serial 1" with connector RJ45 and interface RS232/RS485

Supply Serial link supply "serial 1" at 5 V, 200 mA

Transmission rate 480 Mbit/s for bus length of 3 m - communication protocol: USB

1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m - communication

protocol: RS232

1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m - communication

protocol: RS485

Communication port protocol Modbus non isolated serial link with master/slave method

Supply voltage limits 20.4...28.8 V

Inrush current <= 50 A

Power consumption in W 32.6...40.4 W

Cable length <= 3 m shielded cable for fast output

<= 50 m unshielded cable for output

<= 10 m shielded cable for fast input

<= 50 m unshielded cable for input

Local signalling 1 LED per channel green for I/O state

1 LED red for bus fault on TM4 (TM4)

1 LED green for SL2

1 LED green for SL1

1 LED red for BAT

1 LED green for SD card access (SD)

1 LED red for I/O error (I/O)

1 LED red for module error (ERR)

1 LED green for RUN

1 LED green for PWR

Electrical connection Removable screw terminal block for connecting the 24 V DC power supply (pitch 5.08

mm)

Removable screw terminal block for inputs and outputs (pitch 5.08 mm)

Insulation 500 V AC between fast output and internal logic

Non-insulated between outputs

500 V AC between output and internal logic

500 V AC between fast input and internal logic

Non-insulated between inputs

500 V AC between input and internal logic

Non-insulated between supply and ground

500 V AC between supply and internal logic

Marking CE

Surge withstand 1 kV for transistor output in common mode conforming to EN/IEC 61000-4-5

1 kV for input in common mode conforming to EN/IEC 61000-4-5

1 kV for relay output in differential mode conforming to EN/IEC 61000-4-5

0.5 kV for power lines (DC) in differential mode conforming to EN/IEC 61000-4-5

1 kV for shielded cable in common mode conforming to EN/IEC 61000-4-5

1 kV for power lines (DC) in common mode conforming to EN/IEC 61000-4-5

Mounting support Plate or panel with fixing kit

Top hat type TH35-7.5 rail conforming to IEC 60715

Top hat type TH35-15 rail conforming to IEC 60715

Height 3.54 in (90 mm)

Depth 3.74 in (95 mm)

Width 5.91 in (150 mm)

Product weight 1.17 lb(US) (0.53 kg)

Environment

Standards CSA C22.2 No 142

UL 1604

UL 508

ANSI/ISA 12-12-01

CSA C22.2 No 213

EN/IEC 61131-2 : 2007

Marine specification (LR, ABS, DNV, GL)

Product certifications CSA

CULus

IACS E10

RCM

Resistance to electrostatic discharge 4 kV on contact conforming to EN/IEC 61000-4-2

8 kV in air conforming to EN/IEC 61000-4-2

Resistance to electromagnetic fields 1 V/m (2 GHz...3 GHz) conforming to EN/IEC 61000-4-3

3 V/m (1.4 GHz...2 GHz) conforming to EN/IEC 61000-4-3

10 V/m (80 MHz...1 GHz) conforming to EN/IEC 61000-4-3

Resistance to fast transients 1 kV for transistor output conforming to EN/IEC 61000-4-4

1 kV for input conforming to EN/IEC 61000-4-4

1 kV for serial link conforming to EN/IEC 61000-4-4

2 kV for power lines conforming to EN/IEC 61000-4-4

Resistance to conducted disturbances, induced by

radio frequency fields

10 V (spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz)) conforming to

Marine specification (LR, ABS, DNV, GL)

3 V (0.1...80 MHz) conforming to Marine specification (LR, ABS, DNV, GL)

10 V (0.15...80 MHz) conforming to EN/IEC 61000-4-6

Electromagnetic emission Radiated emissions, test level: 47 dBμV/m QP with class A (radio frequency: 230

MHz...1 GHz) conforming to EN/IEC 55011

Radiated emissions, test level: 40 dBμV/m QP with class A (radio frequency: 30...230

MHz) conforming to EN/IEC 55011

Conducted emissions, test level: 63 dBμV/m QP, condition of test: power lines (radio

frequency: 1.5...30 MHz) conforming to EN/IEC 55011

Conducted emissions, test level: 79...63 dBμV/m QP, condition of test: power lines

(radio frequency: 150 kHz...1.5 MHz) conforming to EN/IEC 55011

Conducted emissions, test level: 120...69 dBµV/m QP, condition of test: power lines

(radio frequency: 10...150 kHz) conforming to EN/IEC 55011

Immunity to microbreaks 10 ms

Ambient air temperature for operation -10...55 °C for horizontal installation

-10...50 °C for vertical installation

Ambient air temperature for storage -13...158 °F (-25...70 °C)

Relative humidity 10...95 % without condensation in storage

10...95 % without condensation in operation

IP degree of protection IP20 with protective cover in place

Pollution degree 2

Operating altitude 0...6561.68 ft (0...2000 m)

Storage altitude 0...9842.52 ft (0...3000 m)

Vibration resistance 3 gn (vibration frequency: 8.4...150 Hz) on panel mounting

3.5 mm (vibration frequency: 5...8.4 Hz) on panel mounting

3 gn (vibration frequency: 8.4...150 Hz) on symmetrical rail

3.5 mm (vibration frequency: 5...8.4 Hz) on symmetrical rail

Shock resistance 15 gn for 11 ms

Offer Sustainability

Sustainable offer status Not Green Premium product

RoHS Compliant - since 1330 - Schneider Electric declaration of conformity