CONTACTS
Arrangement SPST (1 Form A)
Ratings Resistive load:
Max. switched power: 6250 VA
Max. switched current: 25 A
Max. switched voltage: 250 VAC, 30 VDC
Rated Load
UL, CUR
25A at 250 VAC/30 VDC Resistive, 100k ops, 850C
25A at 250 VAC General use, 100k ops, 850C
2 HP at 240 VAC Motor, 100k ops, 850C
25 FLA / 85 LRA at 250 VAC, 100k ops, 850C
Material silver tin oxide
Resistance < 100 milliohms initially
(6V, 1 A voltage drop method)
GENERAL DATA
Life Expectancy Minimum operations
Mechanical 1 x 107
Electrical 1 x 105at 25 A 250 VAC Res.
Operate Time (max) 20 ms at nominal coil voltage
Release Time (max) 10 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength 5,000 VAC coil to contact
(at sea level for 1 min.) 1,000 VAC between open contacts
10,000 V surge contact to coil
Insulation Resistance 1000 megohms min. at 500 VDC
Dropout Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating -40°C (-40°F) to 85°C (185°F)
Storage -40°C (-40°F) to 105°C (266°F)
Vibration 0.059" DA at 10–55 Hz
Shock
Operating 10 g
Non-Operating 100 g
Enclosure P.B.T. polyester
Terminals Tinned copper alloy
P.C. & quick connect
Note: Allow suitable slack on leads when wiring,
and do not subject the terminals to excessive
force.
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Weight 23 grams
AZ7695
3/17/2015
25 AMP MINIATURE
POWER RELAY
FEATURES
•Low cost
•25 Amp switching
•80 Amp inrush current
•Short Circuit Rating 5000 A rms, 250 VAC
•Quick connect and PCB terminals
•Flux tight construction
•
Class F insulation system available
•UL, CUR file E44211
•TUV 50251020
COIL
Power
At Pickup Voltage 441 mW
(typical)
Max. Continuous
Dissipation 1.5 W at 20°C (73.4°F) ambient
Temperature Rise 60°C (140°F) at nominal coil voltage
Temperature Max. 105°C (221°F)
NOTES
1. All values at 23°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
Max. 155°C (311°F) Class F
TUV 16A/20A/25A 250VAC; cos phi=0, 95 100k ops, 85°C
16A/20A/25A 30VDC; 100k ops, 85°C
16A/20A/25A 250VAC; cos phi=0, 75 100k ops, 85°C
NO: 70A/80A for 0,07s 250VAC; cos phi=0, 65
100k ops, 85°C
NC: 25A for 4, 93s 250VAC; cos phi=0, 95
100k ops, 85°C
RELAY ORDERING DATA
COIL SPECIFICATIONS - PCB TERMINALS WITH QUICK CONNECT TERMINALS ORDER NUMBER*
Nominal Coil Must Operate Max. Continuous Coil Resistance Form A
VDC VDC VDC ± 10% (SPST)
5 3.5 6.5 28 AZ7695–1A–5D
6 4.2 7.8 40 AZ7695–1A–6D
9 6.3 11.7 90 AZ7695–1A–9D
12 8.4 15.6 160 AZ7695–1A–12D
18 12.6 23.4 360 AZ7695–1A–18D
24 16.8 31.2 640 AZ7695–1A–24D
48 33.6 62.4 2560 AZ7695–1A–48D
AZ7695
3/17/2015
MECHANICAL DATA
;=
;=
X
;=
-!8
;=
X
;=
-!8
;=
X
;=
X
;=
;=
;=
X
;=
X
;=
X
0#"15)#+#/..%#46%23)/.
;=
-!8
;=
;=
X
;=
-!8
;=
X
;=
;=
;=
;=
;=
;=
4YPICALFORBOTHVERSIONS4YPICALFORBOTHVERSIONS
0#"6%23)/.
0#"/!2$,!9/54 7)2).'$)!'2!-
6IEWEDTOWARDTERMINALS 6IEWEDTOWARDTERMINALS
;=
-!8
;=
-!8
;=
X
;= ;=
X
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
COIL SPECIFICATIONS - PCB TERMINALS ORDER NUMBER*
Nominal Coil Must Operate Max. Continuous Coil Resistance Form A
VDC VDC VDC ± 10% (SPST)
5 3.5 6.5 28 AZ7695–1A–5DK
6 4.2 7.8 40 AZ7695–1A–6DK
9 6.3 11.7 90 AZ7695–1A–9DK
12 8.4 15.6 160 AZ7695–1A–12DK
18 12.6 23.4 360 AZ7695–1A–18DK
24 16.8 31.2 640 AZ7695–1A–24DK
48 33.6 62.4 2560 AZ7695–1A–48DK
*
For epoxy seal change “DK” to “DEK”. For Class F insulation system add suffix “F” to part number.
