19-4877; Rev 8/09 DS9101 Multipurpose Clip www.maxim-ic.com WIRE FEED THRU FEATURES Attachable to a badge Easy detachment by hand Mountable by safety pin to fabric Two pairs of holes for attachment: one for wire mounting, and one for tie wrap Clipable to shirt pocket Stainless steel 0.5mm thickness 28.5 STRAP FEED THRU'S LIFTER 2.3 DIA. 23 ORDERING INFORMATION PART DS9101+ RIVET HOLE iButton RETAINER Dimensions are shown in millimeters. DESCRIPTION Multipurpose clip +Denotes a lead(Pb)-free/RoHS-compliant package. DESCRIPTION The DS9101 Multipurpose Clip offers the user a low-cost fixture that mounts an iButton(R) to a plastic badge or, using an additional wire or tie wrap, any object that provides a hole for strap-mounting. In contrast to the DS9093P/S, the DS9101 also allows mounting iButtons to bags or other soft-surfaced objects. The DS9101 is designed for easy attachment and detachment. Using a DS9093RA Lock Ring, the DS9101 can hold an iButton permanently and still allow all the flexibility of strap mounting. iButton is a registered trademark of Maxim Integrated Products, Inc. 1 of 2 DS9101 REVISION HISTORY REVISION DATE 8/09 DESCRIPTION Updated the Ordering Information table. PAGES CHANGED 1 2 of 2 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 2009 Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products.