* 90 - 150W Convection Cooled Ratings * 1U High * ATX SFX 12V Compatible * Power Factor Corrected * Peak Power Ratings * No Minimum Loading Required Key Market Segments & Applications Industrial & Rack Mount PC Applications ZWX Series 180W to 300W Industrial ATX Power Supplies ZWX Features and Benefits Features Benefits * Convection Cooled Ratings * Low Profile * Industrial Grade * No minimum loading * No Forced Air or Fan Needed * Fits into 1U High Enclosures * Greater Reliability & Field Life * Easier to Use Specifications MODELS ITEMS Input Voltage V Input Current (1)(2) A Inrush Current (2) A Power Factor Leakage Current mA Overcurrent Protection (3) Overvoltage Protection (4) V Hold Up Time (Typ) (1) ms Efficiency (1)(2) % Remote On/Off DC Good PWR_OK Remote Sense Output Voltage Setpoint Accuracy Output Voltage Adjustment Line Regulation mV Load Regulation mV Ripple & Noise mV Operating Temperature C Storage Temperature C Humidity (non condensing) %RH Cooling Withstand Voltage Isolation Resistance Vibration (non operating) Shock (non operating) m/s2 Safety Agency Approvals Conducted & Radiated EMI Immunity Weight (Typ) g Size (WxHxD) mm Warranty yrs ZWX180 ZWX240 ZWX300 85-265VAC (47-63Hz) 2.6 / 1.3 3.2 / 1.6 14 / 28 Cold start 25C ambient Meets EN61000-3-2 < 0.75 >1.05% of forced air current rating (5s delay and manual reset on V1, 2 & 3) +3.3V: 3.76 - 4.3V, +5V: 5.74 - 7V, +12V: 13.4 - 15.6V 20ms at 100VAC 81 / 84 High: Unit off, Low: Unit On (enabled). Meets SFX12V High: Power supply is good. Meets SFX12V +3.3V Only 5% (all outputs) None 3.3V: 20mV, 5V: 48mV, +12V: 48mV, -12V: 20mV, +5Vsb: 20mV 3.3V: 100mV, 5V: 300mV, +12V: 300mV, -12V: 100mV, +5Vsb: 100mV 3.3V: 120mV, 5V: 150mV, +12V: 150mV, -12V: 120mV, +5Vsb: 120mV -10 to +70, derate linearly to 20% load from 50 to 70 -30 to +85C Operating: 30 - 90, Non operating: 10 - 95 Convection or forced air cooled (30CFM, 0.85m3/min) I/P to Gnd 2kVAC (20mA), I/P to O/P 3kVAC (20mA), O/P to Gnd 500VAC (100mA) for 1 min. >100 at 25C & 70%RH, Output to Ground 500VDC 10 - 55Hz (1 minute sweep), 19.6m/s2 constant X, Y, Z 1 hour < 392 UL60950-1, CSA60950-1, EN60950-1, EN50178 (OV II), CE Mark EN55011/EN55022-B, FCC Class B, VCCI-B EN61000-4-2, -3, -4, -5, -6, -8, -11 500 650 800 94 X 36 X 210 106 X 36 X 225 118 X 36 X 250 3 Years 1.9 / 1.0 ZWX Series 1 Model Selector Model V1 V2 V3 V4 V5 V1 V2 V3 V4 V5 V1 V2 V3-1 V3-2 V4 V5 ZWX180 ZWX240 ZWX300 Output Voltage Max Curr. (Convection) +3.3V +5V +12V -12V +5V (sb) +3.3V +5V +12V -12V +5V (sb) +3.3V +5V +12V +12V -12V +5V (sb) 6A(5) 5A(5) 6A 0.2A 1.4A 7A 6A 8A 0.2A 1.4A 10A 6A 4A(6) 8A(6) 0.2A 1.4A Max Power Max Curr (Convection) (Forced Air) 8.4A(5) 7A(5) 9A 0.3A 2A 9.8A 8.4A 11.2A 0.3A 2A 14A 8.4A 5.6A 11.2A 0.4A 2A 90W 120W 150W 153W 204W 255W Peak Curr. (4) Peak Power (4) (Forced Air) (Forced Air) 12A(5) 10A(5) 13A 0.3A 2A 14A 12A 16A 0.3A 2A 20A 12A 8A(7) 16A(7) 0.4A 2A 180W 240W 300W NOTES: Specification Table Page 1 Options Suffix Description Blank /L1 /L2 /A1 /A2 Open frame L Bracket - input on the left side (rear mounting side facing away) L Bracket - input on the right side (rear mounting side facing away) L Bracket & Cover - input on the left side (rear mounting side facing away) L Bracket & Cover - input on the right side (rear mounting side facing away) Connector CN1 CN21 CN21(S-ATA) CN31/CN41 CN51 (1) With output loading of: ZWX180: V1=6.5A, V2=6.5A, V3=7.7A, V4=0.2A, V5=1A ZWX240: V1=8.9A, V2=7.7A, V3=10.2A, V4=0.3A, V5=2A ZWX300: V1=12A, V2=7A, V3-1=5A, V3-2=9.4A, V4=0.2A, V5=1A (2) 100/200VAC (3) Avoid prolonged operation in overload (4) <5s operation at peak load Output Ratings Table above Cable Harness Harness ZWX180 ZWX240 ZWX300 HA-2-IN ZWX-HA-04 ZWX-HA-02 ZWX-HA-01 ZWX-HA-03 Y Y Y Y - Y Y Y Y - Y Y Y Y Y (5) Maxium combined power of V1 & V2: 32W convection, 54W forced air, 63W peak (6) V3-1 & V3-2 combined current limited to 10.9A (131W) (7) V3-1 & V3-2 combined current limited to 22A (264W) Outline Drawing ZWX180 Series 2 Max Power (Forced Air) ZWX Series Outline Drawing ZWX240 Series Outline Drawing ZWX300 Series ZWX Series 3 TDK-LAMBDA EMEA www.emea.tdk-lambda.com TDK-Lambda France SAS TDK-Lambda UK Ltd. Route de Grivery ZAC des Delaches CS 41077 91978 Courtaboeuf Cedex France Tel: +33 1 60 12 71 65 Fax: +33 1 60 12 71 66 france@fr.tdk-lambda.com www.fr.tdk-lambda.com Kingsley Avenue Ilfracombe Devon EX34 8ES United Kingdom Tel: +44 (0) 12 71 85 66 66 Fax: +44 (0) 12 71 86 48 94 powersolutions@uk.tdk-lambda.com www.uk.tdk-lambda.com Italy Sales Office Nemic Lambda Ltd. Via dei Lavoratori 128/130 20092 Cinisello Balsamo (MI) Italy Tel: +39 02 61 29 38 63 Fax: +39 02 61 29 09 00 info.italia@it.tdk-lambda.com www.it.tdk-lambda.com Kibbutz Givat Hashlosha 48800 Israel Tel: +9 723 902 4333 Fax: +9 723 902 4777 info@nemic.co.il www.nemic.co.il TDK-Lambda Germany GmbH Russia Karl-Bold-Strasse 40 77855 Achern Germany Tel: +49 7841 666 0 Fax: +49 7841 5000 info.germany@de.tdk-lambda.com www.de.tdk-lambda.com Technical Support: St Petersburg Tel: +7 (812) 6580463 Sales: Moscow Tel: +7 (499) 7557732 info@tdk-lambda.ru www.tdk-lambda.ru Austria Sales Office Aredstrasse 22 2544 Leobersdorf Austria Tel: +43 2256 655 84 Fax: +43 2256 645 12 info.germany@de.tdk-lambda.com www.de.tdk-lambda.com LOCAL DISTRIBUTION ZWX June11 v2 4 ZWX Series