G3R-OA202SZN-UTU - Omron Electronics

440 Solid State Relay G3R-I/O

Solid State Relay

G3R-I/O

Compact SSRs for I/O Interface with High

Dielectric Strength Requirements

• High-speed models with optimum input ratings for a variety of

sensors are available.

• Input Modules and Output Modules that have the same foot-

print as the G2R.

• Using a coupler approved by VDE 0884 and assuring an I/O

dielectric strength of 4 kV.

• Incorporating an easy-to-see monitoring indicator.

• Approved by UL, CSA, and TÜV.

• Can be used with P2RF-05E socket for use on 35 mm DIN

track.

Ordering Information

To Order: Select the part number and add the desired coil voltage rating, (e.g., G3R-IAZR1SN-DC5)

■Input Module

■Output Module

Note: When ordering a TÜV approved model, add “-UTU” to the model number as shown below:

Example: G3R-OA202SZN-UTU.

Isolation Indicator Response speed Logic level Rated input

voltage

Model

Supply voltage Supply current

Photocoupler Yes — 4 to 32 VDC 0.1 to 100 mA 100 to 240 VAC G3R-IAZR1SN

High-speed

(1 kHz)

5 VDC G3R-IDZR1SN

12 to 24 VDC

Low-speed

(10 Hz)

5 VDC G3R-IDZR1SN-1

12 to 24 VDC

Isolation Indicator Zero cross

function Applicable output

load

Rated input Model

Phototriac Yes Yes 2 A at 75 to 264 VAC 5 to 24 VDC G3R-OA202SZN

No G3R-OA202SLN

Photocoupler — 2 A at 4 to 60 VDC G3R-ODX02SN

1.5 A at 40 to 200 VDC G3R-OD201SN

Solid State Relay G3R-I/O 441

■I/O Indication

I/O module classification and AC/DC use are indicated on the mark

affixed to the top of the product.

Specifications

■Ratings

Input Module

Input

Output

Mark indication Specification

AC IN Input module, AC input

DC IN Input module, DC input

AC OUT Output module, AC output

DC OUT Output module, DC output

Mark attached to the top of the product

Model Rated voltage Operating voltage Input current Must operate

voltage

Must release

voltage

G3R-IAZR1SN 100 to 240 VAC 60 to 264 VAC 15 mA max. 60 VAC max. 20 VAC min.

G3R-IDZR1SN 5 VDC 4 to 6 VDC 8 mA max. 4 VDC max. 1 VDC min.

12 to 24 VDC 6.6 to 32 VDC 6.6 VDC max. 3.6 VDC min.

G3R-IDZR1SN-1 5 VDC 4 to 6 VDC 4 VDC max. 1 VDC min.

12 to 24 VDC 6.6 to 32 VDC 6.6 VDC max. 3.6 VDC min.

Model Logic level supply voltage Logic level supply current

G3R-IAZR1SN 4 to 32 VDC 0.1 to 100 mA

G3R-IDZR1SN

G3R-IDZR1SN-1

442 Solid State Relay G3R-I/O

Output Module

Input

Output

Note: The minimum current value is measured at 10°C min.

Characteristics

■Input Module

Model Rated voltage Operating voltage Input current Must operate

voltage

Must release

voltage

G3R-OA202SZN 5 to 24 VDC 4 to 32 VDC 15 mA max.

(at 25°C)

4 VDC max. 1 VDC min.

G3R-OA202SLN

G3R-ODX02SN 8 mA max.

G3R-OD201SN

Model Load voltage Load current (see note) Inrush current

G3R-OA202SZN 75 to 264 VAC 0.05 to 2 A 30 A (60 Hz, 1 cycle)

G3R-OA202SLN

G3R-ODX02SN 4 to 60 VDC 0.01 to 2 A 8 A (10 ms)

G3R-OD201SN 40 to 200 VDC 0.01 to 1.5 A 8 A (10 ms)

Item G3R-IAZR1SN G3R-IDZR1SN G3R-IDZR1SN-1

Operate time 20 ms max. 0.1 ms max. 15 ms max.

Release time 20 ms max. 0.1 ms max. 15 ms max.

Response frequency 10 Hz 1 kHz 10 Hz

Output ON voltage drop 1.6 V max.

Leakage current 5 µA max.

Insulation resistance 100 MΩmin. between input and output

Dielectric strength 4,000 VAC, 50/60 Hz for 1 min. between input and output

Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude

Shock resistance 1,000 m/s2 {approx. 100G}

Ambient temperature Operating: -30°C to 80°C (with no icing)

Storage: -30°C to 100°C (with no icing)

Approved standards UL508 File No. E64562

CSA C22.2 (No. 14, No. 950) File No. LR35535

TÜV File No. R9650094 (EN60950)

Ambient humidity Operating: 45% to 85%

Weight Approx. 18 g

Solid State Relay G3R-I/O 443

■Output Module

Engineering Data

Load Current vs. Ambient Temperature

Characteristics

Note: 1. When G730-Z0M04-B is mounted.

2. When G70A-Z0C16 is mounted.

Inrush Current Resistivity

Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.)

Item G3R-OA202SZN G3R-OA202SLN G3R-ODX025N G3R-OA201SN

Operate time 1/2 of load power source cycle + 1 ms max. 1 ms max.

Release time 1/2 of load power source cycle + 1 ms max. 2 ms max.

Response frequency 20 Hz 100 kHz

Output ON voltage drop 1.6 V max. 2.5 V max.

Leakage current 1.5 mA max. 1 mA max.

Insulation resistance 100 MΩmin. between input and output

Dielectric strength 4,000 VAC, 50/60 Hz for 1 min. between input and output

Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude

Shock resistance 1,000 m/s2 {approx. 100G}

Ambient temperature Operating: -30°C to 80°C (with no icing)

Storage: -30°C to 100°C (with no icing)

Approved standards UL508 File No. E64562

CSA C22.2 (No. 14, No. 950) File No. LR35535

TÜV File No. R9650094 (EN60950)

Ambient humidity Operating: 45% to 85%

Weight Approx. 18 g

1.5

-- 3 0

0.7

0.5

--20 0 20 30 40 55 60 80 100

1.5

0.5

--30 --20 0 20 40 55 60 80 100 --30 --20 0 20 40 55 60 80 100

1.5

0.5

0.6

4-point mounting (see note 1)

16-point mounting (see note 2)

4-point mounting (see note 1)

16-point mounting (see note 2) 4-point mounting (see note 1)

16-point

mounting

(see note 2)

Ambient temperature (°C)

Load current (A)

Ambient temperature (°C)

Load current (A)

Ambient temperature (°C)

Load current (A)

Single-point

mounting

1.4 1.4

Single-point

mounting

1.1

Single-point

mounting

G3R-OA202SZN/OA202SLN G3R-ODX02SN (4 to 60 VDC) G3R-OD201SN (40 to 200 VAC)

10 30 50 100 200 5001000 5000

010 30 50 100 500 1000 2000

300 300

Inrush current (A)

Energizing time (ms)

Inrush current (A)

Energizing time (ms)

Inrush current (A)

Energizing time (ms)

G3R-OA202SZN/OA202SLN G3R-ODX02SN G3R-OD201SN

444 Solid State Relay G3R-I/O

Operation

■Precaution of Mounting Output Modules

Dimensions

Unit: mm (inch)

■G3R

■Connecting Sockets

P2RF-05-E

G3R G3R G3R

With up to four G3R SSRs mounted closely and

side by side, 2-A loads can be switched.

With a G3R SSRs mounted every other slot,

2-A loads can be switched.

(+)

(--)

Load

Input

13 max. 28 max. 57.5

9.6

1 5

(--) (+)

0.5

5.2

17.4

4.7

4.75

0.5

29 max.

Terminal arrangement/

Internal connections

(Bottom view)

PFRF-05-E

Socket

G3RZ Relay

62.5 **

(66.5)**

3.2-dia. hole

M3 or 3.5-dia. hole

59 max.

48 max.

M3.5 screw

3.5-dia.

hole

85.5 max.

61 max. ** Indicates a value when using the PFP-❏N

Supporting Rail with the P2RF-05-E

The value is 71.5 when using the PFP-❏N2.

*** Indicates a value when using the PFP-❏N

Supporting Rail with the P2RF-08-E

The value is 75.5 when using the PFP-❏N2.

Solid State Relay G3R-I/O 445

P2R-057P

■Socket Mounting Plate

Use the Socket Mounting Plate when arranging several Sockets in a row.

G70A I/O Block Base

■Ordering Information

Note: Each relay to be mounted must incorporate a coil that has proper specifications within the maximum rated voltage range.

G3RZ Relay

P2R-057P Socket

Five, 1.6-dia. hole

14 max.

32 max.

41 max.

Classification Internal I/O circuit common Rated voltage Model

Output NPN (+ common) 24 VDC G70A-ZOC16-3

PNP (- common) 24 VDC G70A-ZOC16-4

Input NPN/PNP 110 VDC max., 240 VAC max.

(see note)

G70A-ZIM16-5

R2.25

10 ellipses

Square hole

446 Solid State Relay G3R-I/O

Dimensions

Note: All units are in millimeters unless otherwise indicated.

G70A-ZOC16 (Output)

G70A-ZIM16 (Input)

234

20.7

34.2

48.7

9.2 19.6

28.6

M3.5

35.3

+0.2

-- 0

234

10.2

9.2 19.6

M3.5

48.7

20.7

34.2

35.3

+0.2

-- 0

Solid State Relay G3R-I/O 447

Installation

■Terminal Arrangement/Internal Connection

G70A-ZOC16-3 (NPN)

G70A-ZOC16-4 (PNP)

Connector Terminal

Arrangement

(Top View)

Connector Terminal

Arrangement

(

View

)

448 Solid State Relay G3R-I/O

G70A-ZIM16-5 (NPN/PNP)

■Approvals

UL (File No. E64562)/CSA (File No. LR35535)

Model G3R- Module type Rating

IAZR1SN Input 100 to 240 VAC

IDZR1SN Input 5 VDC, 12 to 24 VDC

IDZR1SN-1 Input 5 VDC, 12 to 24 VDC

OA202SZN Output 5 to 24 VDC

OA202SLN Output 5 to 24 VDC

ODX02SN Output 5 to 24 VDC

OD201SN Output 5 to 24 VDC

Connector Terminal

Arrangement

(

View

)

COM. 1A2 2A2 3A2 4A2 5A2 6A2 7A2 8A2 9A2 10A2 11A2 12A2 13A2 14A2 15A2 16A

9A1 10A1 11A1 12A1 13A1 14A1 15A1 16A15A1 6A1 7A1 8A11A1 2A1 3A1 4A1

Model G3R- Module type Output rating

IAZR1SN Input 32 VDC, 100 mA (General Purpose)

IDZR1SN Input 32 VDC, 100 mA (General Purpose)

IDZR1SN-1 Input 32 VDC, 100 mA (General Purpose)

OA202SZN Output 264 VAC, 2 A (General Purpose)

264 VAC, 1 A (Tungsten)

264 VAC, 1 A FLA, 6 A LRA

OA202SLN Output 264 VAC, 2 A (General Purpose)

264 VAC, 1 A (Tungsten)

264 VAC, 1 A FLA, 6 A LRA

ODX02SN Output 60 VDC, 2 A (General Purpose)

60 VDC, 1 A (Tungsten)

OD201SN Output 200 VDC, 1.5 A (General Purpose)

200 VDC, 0.75 A (Tungsten)

Solid State Relay G3R-I/O 449

Precautions

See General Information section near back of this catalog for solid state precautions.

■Connection

With the SSR for DC switching, the load can be connected to either

positive or negative output terminal of the SSR.

■Protective element

Since the SSR does not incorporate an overvoltage absorption com-

ponent, be sure to connect an overvoltage absorption component

when using the SSR under an inductive load.

Certain Terms and Conditions of Sale

1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed

part of all catalogs, manuals or other documents, whether electronic or in writ-

ing, relating to the sale of goods or services (collectively, the "Goods") by

Omron Electronic Components LLC and its subsidiary companies ("Seller").

Seller hereby objects to any terms or conditions proposed in Buyer's purchase

order or other documents which are inconsistent with, or in addition to, these

Terms. Please contact your Omron representative to confirm any additional

terms for sales from your Omron company.

2. Prices. All prices stated are current, subject to change without notice by

Seller. Buyer agrees to pay the price in effect at time of shipment.

3. Discounts. Cash discounts, if any, will apply only on the net amount of

invoices sent to Buyer after deducting transportation charges, taxes and

duties, and will be allowed only if (i) the invoice is paid according to Seller's

payment terms and (ii) Buyer has no past due amounts owing to Seller.

4. Orders. Seller will accept no order less than $200 net billing.

5. Governmental Approvals. Buyer shall be responsible for, and shall bear all

costs involved in, obtaining any government approvals required for the impor-

tation or sale of the Goods.

6. Taxes. All taxes, duties and other governmental charges (other than general

real property and income taxes), including any interest or penalties thereon,

imposed directly or indirectly on Seller or required to be collected directly or

indirectly by Seller for the manufacture, production, sale, delivery, importation,

consumption or use of the Goods sold hereunder (including customs duties

and sales, excise, use, turnover and license taxes) shall be charged to and

remitted by Buyer to Seller.

7. Financial. If the financial position of Buyer at any time becomes unsatisfactory

to Seller, Seller reserves the right to stop shipments or require satisfactory

security or payment in advance. If Buyer fails to make payment or otherwise

comply with these Terms or any related agreement, Seller may (without liability

and in addition to other remedies) cancel any unshipped portion of Goods sold

hereunder and stop any Goods in transit until Buyer pays all amounts, includ-

ing amounts payable hereunder, whether or not then due, which are owing to it

by Buyer. Buyer shall in any event remain liable for all unpaid accounts.

8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation

unless Buyer indemnifies Seller fully against all costs or expenses arising in

connection therewith.

9. Force Majeure. Seller shall not be liable for any delay or failure in delivery

resulting from causes beyond its control, including earthquakes, fires, floods,

strikes or other labor disputes, shortage of labor or materials, accidents to

machinery, acts of sabotage, riots, delay in or lack of transportation or the

requirements of any government authority.

10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller:

a. Shipments shall be by a carrier selected by Seller;

b. Such carrier shall act as the agent of Buyer and delivery to such carrier

shall constitute delivery to Buyer;

c. All sales and shipments of Goods shall be FOB shipping point (unless oth-

erwise stated in writing by Seller), at which point title to and all risk of loss of

the Goods shall pass from Seller to Buyer, provided that Seller shall retain a

security interest in the Goods until the full purchase price is paid by Buyer;

d. Delivery and shipping dates are estimates only.

e. Seller will package Goods as it deems proper for protection against normal

handling and extra charges apply to special conditions.

11. Claims. Any claim by Buyer against Seller for shortage or damage to the

Goods occurring before delivery to the carrier must be presented in writing to

Seller within 30 days of receipt of shipment and include the original transporta-

tion bill signed by the carrier noting that the carrier received the Goods from

Seller in the condition claimed.

12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that the

Goods will be free from defects in materials and workmanship for a period o

twelve months from the date of sale by Seller (or such other period expressed

in writing by Seller). Seller disclaims all other warranties, express or implied.

(b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATION,

EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-

ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE GOODS.

BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE

GOODS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR

INTENDED USE. Seller further disclaims all warranties and responsibility o

any type for claims or expenses based on infringement by the Goods or other-

wise of any intellectual property right. (c) Buyer Remedy. Seller's sole obliga-

tion hereunder shall be to replace (in the form originally shipped with Buye

responsible for labor charges for removal or replacement thereof) the non-

complying Good or, at Seller's election, to repay or credit Buyer an amoun

equal to the purchase price of the Good; provided that in no event shall Selle

be responsible for warranty, repair, indemnity or any other claims or expenses

regarding the Goods unless Seller's analysis confirms that the Goods were

properly handled, stored, installed and maintained and not subject to contami-

nation, abuse, misuse or inappropriate modification. Return of any goods b

Buyer must be approved in writing by Seller before shipment. Seller shall no

be liable for the suitability or unsuitability or the results from the use of Goods

in combination with any electrical or electronic components, circuits, system

assemblies or any other materials or substances or environments. An

advice, recommendations or information given orally or in writing, are not to be

construed as an amendment or addition to the above warranty.

13. Damage Limits; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL, INDI-

RECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUC-

TION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE

GOODS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY,

NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability o

Seller exceed the individual price of the Good on which liability is asserted.

14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates and

its employees from and against all liabilities, losses, claims, costs and

expenses (including attorney's fees and expenses) related to any claim, inves-

tigation, litigation or proceeding (whether or not Seller is a party) which arises

or is alleged to arise from Buyer's acts or omissions under these Terms or in

any way with respect to the Goods. Without limiting the foregoing, Buyer (a

its own expense) shall indemnify and hold harmless Seller and defend or settle

any action brought against Seller to the extent that it is based on a claim tha

any Good made to Buyer specifications infringed intellectual property rights o

another party.

15. Property; Confidentiality. The intellectual property embodied in the Goods is

the exclusive property of Seller and its affiliates and Buyer shall not attempt to

duplicate it in any way without the written permission of Seller. Notwithstand-

ing any charges to Buyer for engineering or tooling, all engineering and tooling

shall remain the exclusive property of Seller. All information and materials

supplied by Seller to Buyer relating to the Goods are confidential and propri-

etary, and Buyer shall limit distribution thereof to its trusted employees and

strictly prevent disclosure to any third party.

16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any righ

and no course of dealing between Buyer and Seller shall operate as a waive

of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunde

without Seller's written consent. (c) Amendment. These Terms constitute the

entire agreement between Buyer and Seller relating to the Goods, and no pro-

vision may be changed or waived unless in writing signed by the parties.

(d) Severability. If any provision hereof is rendered ineffective or invalid, such

provision shall not invalidate any other provision. (e) Setoff. Buyer shall have

no right to set off any amounts against the amount owing in respect of this

invoice. (f) As used herein, "including" means "including without limitation".

Certain Precautions on Specifications and Use

1. Suitability of Use. Seller shall not be responsible for conformity with any stan-

dards, codes or regulations which apply to the combination of the Good in the

Buyer's application or use of the Good. At Buyer's request, Seller will provide

applicable third party certification documents identifying ratings and limitations

of use which apply to the Good. This information by itself is not sufficient for a

complete determination of the suitability of the Good in combination with the

end product, machine, system, or other application or use. The following are

some examples of applications for which particular attention must be given.

This is not intended to be an exhaustive list of all possible uses of this Good,

nor is it intended to imply that the uses listed may be suitable for this Good:

(i) Outdoor use, uses involving potential chemical contamination or electrical

interference, or conditions or uses not described in this document.

(ii) Energy control systems, combustion systems, railroad systems, aviation

systems, medical equipment, amusement machines, vehicles, safety

equipment, and installations subject to separate industry or government

regulations.

(iii) Systems, machines and equipment that could present a risk to life or

property. Please know and observe all prohibitions of use applicable to

this Good.

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS

RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM

AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT

THE SELLER'S PRODUCT IS PROPERLY RATED AND INSTALLED FOR

THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

2. Programmable Products. Seller shall not be responsible for the user's pro

gramming of a programmable Good, or any consequence thereof.

3. Performance Data. Performance data given in this catalog is provided as

guide for the user in determining suitability and does not constitute a warrant

It may represent the result of Seller's test conditions, and the user must corre

late it to actual application requirements. Actual performance is subject to th

Seller's Warranty and Limitations of Liability.

4. Change in Specifications. Product specifications and accessories may b

changed at any time based on improvements and other reasons. It is our pra

tice to change part numbers when published ratings or features are change

or when significant construction changes are made. However, some specifica

tions of the Good may be changed without any notice. When in doubt, speci

part numbers may be assigned to fix or establish key specifications for you

application. Please consult with your Seller's representative at any time to con

firm actual specifications of purchased Good.

5. Errors and Omissions. The information in this catalog has been carefull

checked and is believed to be accurate; however, no responsibility is assume

for clerical, typographical or proofreading errors, or omissions.

OMRON ON-LINE

Global - http://www.omron.com

USA - http://www.omron.com/oei

Canada - http://www.omron.ca

Cat. No. GC RLY8A Printed in USA

OMRON CANADA, INC.

885 Milner Avenue

Toronto, Ontario M1B 5V8

416-286-6465

OMRON ELECTRONIC

COMPONENTS LLC

55 E. Commerce Drive, Suite B

Schaumburg, IL 60173

847-882-2288

8/04 Specifications subject to change without notice

Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website

at www.omron.com/oei – under the “About Us” tab, in the Legal Matters section.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.