Solid State Relay G3R-I/O Compact SSRs for I/O Interface with High Dielectric Strength Requirements * High-speed models with optimum input ratings for a variety of sensors are available. * Input Modules and Output Modules that have the same footprint as the G2R. * Using a coupler approved by VDE 0884 and assuring an I/O dielectric strength of 4 kV. * Incorporating an easy-to-see monitoring indicator. * Approved by UL, CSA, and TUV. * Can be used with P2RF-05E socket for use on 35 mm DIN track. Ordering Information To Order: Select the part number and add the desired coil voltage rating, (e.g., G3R-IAZR1SN-DC5) Input Module Isolation Indicator Response speed Logic level Supply voltage Photocoupler Yes -- 4 to 32 VDC Supply current 0.1 to 100 mA Rated input voltage Model 100 to 240 VAC G3R-IAZR1SN High-speed (1 kHz) 5 VDC G3R-IDZR1SN Low-speed (10 Hz) 5 VDC 12 to 24 VDC G3R-IDZR1SN-1 12 to 24 VDC Output Module Isolation Phototriac Indicator Yes Zero cross function Yes Applicable output load 2 A at 75 to 264 VAC No Photocoupler -- Solid State Relay G3R-I/O 5 to 24 VDC Model G3R-OA202SZN G3R-OA202SLN 2 A at 4 to 60 VDC G3R-ODX02SN 1.5 A at 40 to 200 VDC G3R-OD201SN Note: When ordering a TUV approved model, add "-UTU" to the model number as shown below: Example: G3R-OA202SZN-UTU. 440 Rated input I/O Indication I/O module classification and AC/DC use are indicated on the mark affixed to the top of the product. Mark indication Specification AC IN Input module, AC input DC IN Input module, DC input AC OUT Output module, AC output DC OUT Output module, DC output Mark attached to the top of the product Specifications Ratings Input Module Input Model Rated voltage Operating voltage Input current Must operate voltage Must release voltage G3R-IAZR1SN 100 to 240 VAC 60 to 264 VAC 15 mA max. 60 VAC max. 20 VAC min. G3R-IDZR1SN 5 VDC 4 to 6 VDC 8 mA max. 4 VDC max. 1 VDC min. 12 to 24 VDC 6.6 to 32 VDC 6.6 VDC max. 3.6 VDC min. 5 VDC 4 to 6 VDC 4 VDC max. 1 VDC min. 12 to 24 VDC 6.6 to 32 VDC 6.6 VDC max. 3.6 VDC min. G3R-IDZR1SN-1 Output Model G3R-IAZR1SN Logic level supply voltage 4 to 32 VDC Logic level supply current 0.1 to 100 mA G3R-IDZR1SN G3R-IDZR1SN-1 Solid State Relay G3R-I/O 441 Output Module Input Model G3R-OA202SZN Rated voltage 5 to 24 VDC Operating voltage 4 to 32 VDC Input current G3R-OA202SLN 15 mA max. (at 25C) G3R-ODX02SN 8 mA max. Must operate voltage 4 VDC max. Must release voltage 1 VDC min. G3R-OD201SN Output Model G3R-OA202SZN Load voltage 75 to 264 VAC Load current (see note) 0.05 to 2 A Inrush current 30 A (60 Hz, 1 cycle) G3R-OA202SLN G3R-ODX02SN 4 to 60 VDC 0.01 to 2 A 8 A (10 ms) G3R-OD201SN 40 to 200 VDC 0.01 to 1.5 A 8 A (10 ms) Note: The minimum current value is measured at 10C min. Characteristics Input Module Item Operate time Release time Response frequency G3R-IAZR1SN 20 ms max. 20 ms max. 10 Hz Output ON voltage drop Leakage current Insulation resistance Dielectric strength Vibration resistance Shock resistance 1.6 V max. 5 A max. 100 M min. between input and output 4,000 VAC, 50/60 Hz for 1 min. between input and output 10 to 55 Hz, 1.5-mm double amplitude Ambient temperature Operating: -30C to 80C (with no icing) Storage: -30C to 100C (with no icing) UL508 File No. E64562 CSA C22.2 (No. 14, No. 950) File No. LR35535 TUV File No. R9650094 (EN60950) Operating: 45% to 85% Approx. 18 g Approved standards Ambient humidity Weight 442 G3R-IDZR1SN 0.1 ms max. 0.1 ms max. 1 kHz 1,000 m/s2 {approx. 100G} Solid State Relay G3R-I/O G3R-IDZR1SN-1 15 ms max. 15 ms max. 10 Hz Output Module Item Operate time Release time Response frequency Output ON voltage drop G3R-OA202SZN G3R-OA202SLN 1/2 of load power source cycle + 1 ms max. 1/2 of load power source cycle + 1 ms max. 20 Hz 1.6 V max. Leakage current Insulation resistance Dielectric strength Vibration resistance Shock resistance 1.5 mA max. 1 mA max. 100 M min. between input and output 4,000 VAC, 50/60 Hz for 1 min. between input and output 10 to 55 Hz, 1.5-mm double amplitude Ambient temperature Approved standards Ambient humidity Weight G3R-ODX025N 1 ms max. 2 ms max. 100 kHz G3R-OA201SN 2.5 V max. 1,000 m/s2 {approx. 100G} Operating: -30C to 80C (with no icing) Storage: -30C to 100C (with no icing) UL508 File No. E64562 CSA C22.2 (No. 14, No. 950) File No. LR35535 TUV File No. R9650094 (EN60950) Operating: 45% to 85% Approx. 18 g Engineering Data Load Current vs. Ambient Temperature Characteristics 1.5 1.4 4-point mounting (see note 1) 2 16-point mounting (see note 2) Single-point mounting 1 0.7 0.5 --30 --20 0 20 30 40 55 60 80 Load current (A) Load current (A) 2 G3R-ODX02SN (4 to 60 VDC) 1.5 1.4 4-point mounting (see note 1) 2 16-point mounting (see note 2) Single-point mounting 1 0.5 --30 --20 100 G3R-OD201SN (40 to 200 VAC) 0 20 40 55 60 80 Load current (A) G3R-OA202SZN/OA202SLN 1.5 1.1 1 0.6 0.5 Single-point mounting 16-point mounting (see note 2) --30 --20 100 Ambient temperature (C) Ambient temperature (C) 4-point mounting (see note 1) 0 20 40 55 60 80 100 Ambient temperature (C) Note: 1. When G730-Z0M04-B is mounted. 2. When G70A-Z0C16 is mounted. Inrush Current Resistivity Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.) G3R-ODX02SN Inrush current (A) Inrush current (A) 30 20 10 G3R-OD201SN 10 10 9 9 8 8 Inrush current (A) G3R-OA202SZN/OA202SLN 7 6 5 4 3 2 10 30 50 100 200 500 1000 Energizing time (ms) 5000 6 5 4 3 2 1 1 0 10 7 30 50 100 300 500 1000 2000 Energizing time (ms) 0 10 30 50 100 300 500 1000 2000 Energizing time (ms) Solid State Relay G3R-I/O 443 Operation Precaution of Mounting Output Modules With up to four G3R SSRs mounted closely and side by side, 2-A loads can be switched. G3R With a G3R SSRs mounted every other slot, 2-A loads can be switched. G3R G3R Dimensions Unit: mm (inch) G3R Terminal arrangement/ Internal connections (Bottom view) 1 5.2 3 0.5 29 max. 1 5 28 max. (--) 17.4 4.75 13 max. (+) 4 9.6 7.5 3 4 Load 5 4.7 Input 0.5 4.75 4 10 1 5 (--) (+) 2 20 Connecting Sockets P2RF-05-E G3RZ Relay 59 max. 48 max. M3.5 screw PFRF-05-E Socket 3.2-dia. hole 3.5-dia. hole 62.5 ** (66.5)*** 85.5 max. M3 or 3.5-dia. hole 61 max. 444 Solid State Relay G3R-I/O ** Indicates a value when using the PFP-N Supporting Rail with the P2RF-05-E The value is 71.5 when using the PFP-N2. *** Indicates a value when using the PFP-N Supporting Rail with the P2RF-08-E The value is 75.5 when using the PFP-N2. P2R-057P 14 max. Five, 1.6-dia. hole G3RZ Relay 32 max. P2R-057P Socket 41 max. Socket Mounting Plate Use the Socket Mounting Plate when arranging several Sockets in a row. R2.25 10 ellipses Square hole G70A I/O Block Base Ordering Information Classification Output Input Internal I/O circuit common Rated voltage Model NPN (+ common) 24 VDC G70A-ZOC16-3 PNP (- common) 24 VDC G70A-ZOC16-4 NPN/PNP 110 VDC max., 240 VAC max. (see note) G70A-ZIM16-5 Note: Each relay to be mounted must incorporate a coil that has proper specifications within the maximum rated voltage range. Solid State Relay G3R-I/O 445 Dimensions Note: All units are in millimeters unless otherwise indicated. G70A-ZOC16 (Output) 234 64 +0.2 35.3 --0 75 28.6 M3.5 9.2 19.6 20.7 34.2 48.7 G70A-ZIM16 (Input) 234 48.7 10.2 +0.2 35.3 --0 75 M3.5 9.2 19.6 20.7 34.2 54 446 Solid State Relay G3R-I/O Installation Terminal Arrangement/Internal Connection G70A-ZOC16-3 (NPN) -+ -+ Connector Terminal Arrangement (Top View) G70A-ZOC16-4 (PNP) -+ -+ Connector Terminal Arrangement (Top View) Solid State Relay G3R-I/O 447 G70A-ZIM16-5 (NPN/PNP) 1A1 -+ -+ COM. 2A1 1A2 3A1 2A2 4A1 3A2 5A1 4A2 6A1 5A2 7A1 6A2 8A1 7A2 9A1 8A2 10A1 9A2 11A1 10A2 12A1 11A2 13A1 12A2 14A1 13A2 15A1 14A2 16A1 15A2 Connector Terminal Arrangement (Top View) Approvals UL (File No. E64562)/CSA (File No. LR35535) Model G3RIAZR1SN Module type Input Rating 100 to 240 VAC IDZR1SN Input 5 VDC, 12 to 24 VDC IDZR1SN-1 Input 5 VDC, 12 to 24 VDC OA202SZN Output 5 to 24 VDC OA202SLN Output 5 to 24 VDC ODX02SN Output 5 to 24 VDC OD201SN Output 5 to 24 VDC Model G3RIAZR1SN Module type Input Output rating 32 VDC, 100 mA (General Purpose) IDZR1SN Input 32 VDC, 100 mA (General Purpose) IDZR1SN-1 Input 32 VDC, 100 mA (General Purpose) OA202SZN Output 264 VAC, 2 A (General Purpose) 264 VAC, 1 A (Tungsten) 264 VAC, 1 A FLA, 6 A LRA OA202SLN Output 264 VAC, 2 A (General Purpose) 264 VAC, 1 A (Tungsten) 264 VAC, 1 A FLA, 6 A LRA ODX02SN Output 60 VDC, 2 A (General Purpose) OD201SN Output 200 VDC, 1.5 A (General Purpose) 60 VDC, 1 A (Tungsten) 200 VDC, 0.75 A (Tungsten) 448 Solid State Relay G3R-I/O 16A2 Precautions See General Information section near back of this catalog for solid state precautions. Connection With the SSR for DC switching, the load can be connected to either positive or negative output terminal of the SSR. Protective element Since the SSR does not incorporate an overvoltage absorption component, be sure to connect an overvoltage absorption component when using the SSR under an inductive load. Solid State Relay G3R-I/O 449 Certain Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all catalogs, manuals or other documents, whether electronic or in writing, relating to the sale of goods or services (collectively, the "Goods") by Omron Electronic Components LLC and its subsidiary companies ("Seller"). Seller hereby objects to any terms or conditions proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. Please contact your Omron representative to confirm any additional terms for sales from your Omron company. 2. Prices. All prices stated are current, subject to change without notice by Seller. Buyer agrees to pay the price in effect at time of shipment. 3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Seller's payment terms and (ii) Buyer has no past due amounts owing to Seller. 4. Orders. Seller will accept no order less than $200 net billing. 5. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the importation or sale of the Goods. 6. Taxes. All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Seller or required to be collected directly or indirectly by Seller for the manufacture, production, sale, delivery, importation, consumption or use of the Goods sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Seller. 7. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Seller, Seller reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Seller may (without liability and in addition to other remedies) cancel any unshipped portion of Goods sold hereunder and stop any Goods in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Seller fully against all costs or expenses arising in connection therewith. 9. Force Majeure. Seller shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller: a. Shipments shall be by a carrier selected by Seller; b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; c. All sales and shipments of Goods shall be FOB shipping point (unless otherwise stated in writing by Seller), at which point title to and all risk of loss of the Goods shall pass from Seller to Buyer, provided that Seller shall retain a security interest in the Goods until the full purchase price is paid by Buyer; d. Delivery and shipping dates are estimates only. e. Seller will package Goods as it deems proper for protection against normal handling and extra charges apply to special conditions. 11. Claims. Any claim by Buyer against Seller for shortage or damage to the Goods occurring before delivery to the carrier must be presented in writing to Seller within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Goods from Seller in the condition claimed. 12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that the Goods will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Seller (or such other period expressed in writing by Seller). Seller disclaims all other warranties, express or implied. (b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE GOODS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE GOODS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Seller further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Goods or otherwise of any intellectual property right. (c) Buyer Remedy. Seller's sole obligation hereunder shall be to replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the noncomplying Good or, at Seller's election, to repay or credit Buyer an amount equal to the purchase price of the Good; provided that in no event shall Seller be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Goods unless Seller's analysis confirms that the Goods were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any goods by Buyer must be approved in writing by Seller before shipment. Seller shall not be liable for the suitability or unsuitability or the results from the use of Goods in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. 13. Damage Limits; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE GOODS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Seller exceed the individual price of the Good on which liability is asserted. 14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates and its employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Goods. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Seller and defend or settle any action brought against Seller to the extent that it is based on a claim that any Good made to Buyer specifications infringed intellectual property rights of another party. 15. Property; Confidentiality. The intellectual property embodied in the Goods is the exclusive property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way without the written permission of Seller. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Seller. All information and materials supplied by Seller to Buyer relating to the Goods are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any right and no course of dealing between Buyer and Seller shall operate as a waiver of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunder without Seller's written consent. (c) Amendment. These Terms constitute the entire agreement between Buyer and Seller relating to the Goods, and no provision may be changed or waived unless in writing signed by the parties. (d) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (e) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. (f) As used herein, "including" means "including without limitation". Certain Precautions on Specifications and Use 1. Suitability of Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Good in the Buyer's application or use of the Good. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Good. This information by itself is not sufficient for a complete determination of the suitability of the Good in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of this Good, nor is it intended to imply that the uses listed may be suitable for this Good: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iii) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Good. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE SELLER'S PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 2. Programmable Products. Seller shall not be responsible for the user's pro gramming of a programmable Good, or any consequence thereof. 3. Performance Data. Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty It may represent the result of Seller's test conditions, and the user must corre late it to actual application requirements. Actual performance is subject to the Seller's Warranty and Limitations of Liability. 4. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our prac tice to change part numbers when published ratings or features are changed or when significant construction changes are made. However, some specifica tions of the Good may be changed without any notice. When in doubt, specia part numbers may be assigned to fix or establish key specifications for you application. Please consult with your Seller's representative at any time to con firm actual specifications of purchased Good. 5. Errors and Omissions. The information in this catalog has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors, or omissions. Complete "Terms and Conditions of Sale" for product purchase and use are on Omron's website at www.omron.com/oei - under the "About Us" tab, in the Legal Matters section. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ELECTRONIC COMPONENTS LLC 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 847-882-2288 Cat. No. GC RLY8A 8/04 OMRON CANADA, INC. OMRON ON-LINE 885 Milner Avenue Toronto, Ontario M1B 5V8 Global - http://www.omron.com USA - http://www.omron.com/oei Canada - http://www.omron.ca 416-286-6465 Specifications subject to change without notice Printed in USA