Telecom-, Signal and RF Relays
AXICOM
D2n V23105 Relay
108-98007 • Nov. 07 Rev A • ECOC: JM10
108-98007 Rev A
All specications subject to change. Consult Tyco Electronics for latest specications. 2 of 12
Telecom-, Signal and RF Relays
D2n V23105 Relay
AXICOM
Index
Dimensions 4
Coil Operating Range 5
Relay Code 6
Coil Data and Ordering Information 7
Contact Data 8
Insulation 9
General Data 9
Packing 10UL 508 File No. E 111441
Disclaimer
While Tyco Electronics has made every reasonable effort
to ensure the accuracy of the information in this datasheet,
Tyco Electronics does not guarantee that it is error-free,
nor does Tyco Electronics make any other representati-
on, warranty or guarantee that the information is accurate,
correct, reliable or current. Tyco Electronics reserves the
right to make any adjustments to the information contai-
ned herein at any time without notice. Tyco Electronics
expressly disclaims all implied warranties (and all express
warranties, except as otherwise stated in this datasheet)
regarding the information contained herein, including but
not limited to any implied warranties or merchantability or
tness for a particular purpose. It is recommended that
you test any new or replacement product before incorpo-
rating into a system.
The dimensions in this datasheet are for reference purpo-
se only and are subject to change without notice. Speci-
cations are subject to change without notice.
108-98007 Rev A
All specications subject to change. Consult Tyco Electronics for latest specications. 3 of 12
Telecom-, Signal and RF Relays
D2n V23105 Relay
AXICOM
2 pole telecom relay, non-polarized,
Through Hole Type (THT)
Relay types: non-latching with 1 coil
ROHS compliant (Directive 2002/95/EC) as per
product date code 0418.
Features
• Standard DIL relay
• Dimensions 20 x 10 x 11 mm,
0.795 x 0.394 x 0.433 inch
• Switching and continous current 3 A
• 2 changeover contacts (2 form C / DPDT)
• Single contacts
• Immersion cleanable
• Four different coil sensitivities
• (150, 200, 400, > 500 mW)
• Surge voltage resistance meets FCC Part 68 require-
ment:
1.5 kV (10 / 700 µs) between coil and contacts
Typical applications
• Communications equipment
• Ofce equipment
• Measurement and control equipment
• Entertainment electronics
• Medical Equipment
• Consumer electronics
108-98007 Rev A
All specications subject to change. Consult Tyco Electronics for latest specications. 4 of 12
Telecom-, Signal and RF Relays
D2n V23105 Relay
AXICOM
Dimensions Dimensions in mm
THT
mm inch
L
W
H
20.2 + 0.05/-0.02
10 + 0.05/-0.02
11 + 0.1/-0.2
0.795 + 0.002/-0.0008
0.393 + 0.002/-0.0008
0.433 + 0.004/-0.008
T
T1
T2
S
Tw
3.1 ± 0.3
N / A
7.62 ± 0.15
0.55
0.5
0.122 ± 0.011
N / A
0.3 ± 0.005
0.021
0.020
THT Version
Mounting hole layout
View onto the component side of the PCB (top view)
Terminal assignment
Relay – top view
Basic grid 2.54 mm
108-98007 Rev A
All specications subject to change. Consult Tyco Electronics for latest specications. 5 of 12
Telecom-, Signal and RF Relays
D2n V23105 Relay
AXICOM
Coil Operating Range
Unom = Nominal coil voltage
Umax. = Upper limit of the operative range of the coil voltage (limiting
voltage) when coils are continously energized
Uop. min. = Lower limit of the operative range of
the coil voltage (reliable operate voltage)
Urel. min. = Lower limit of the operative range of
the coil voltage (reliable release voltage)
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
2.8
3.0
-30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120
550 mW coil
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
2.8
3.0
-30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120
150 mW coil
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
-30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120
200 mW coil
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
2.8
3.0
-30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120
400 mW coil
Umax. at 0 A
Umax. at 2 x 2 A
Umax. at 2 x 1 A
Unom. nominal coil voltage
Uop. min.
Urel. min.
Ambient Temperature [°C]
Coil Voltage [U/Unom]
Umax. at 0 A
Umax. at 2 x 2 A
Umax. at 2 x 1 A
Unom. nominal coil voltage
Uop. min.
Urel. min.
Ambient Temperature [°C]
Coil Voltage [U/Unom]
Umax. at 0 A
Umax. at 2 x 2 A
Umax. at 2 x 1 A
Unom.
Uop. min.
Urel. min.
Ambient Temperature [°C]
Coil Voltage [U/Unom]
Umax. at 0 A
Umax. at 2 x 2 A
Umax. at 2 x 1 A
Unom.
Uop. min.
Urel. min.
Ambient Temperature [°C]
Coil Voltage [U/Unom]
150 mW 200 mW
400 mW 550 mW
108-98007 Rev A
All specications subject to change. Consult Tyco Electronics for latest specications. 6 of 12
Telecom-, Signal and RF Relays
D2n V23105 Relay
AXICOM
Coil number
08 = 3 V nominal voltage (only with 150/200 mW nominal coil power consumption*)
01 = 5 V nominal voltage
02 = 6 V
06 = 9 V
04 = 10 V
03 = 12 V
05 = 24 V
07 = 48 V
BT 47 versions
475 = 5 V nominal voltage
479 = 10 V
476 = 12 V
477 = 24 V
478 = 48 V
A5
V23105
D2n Relay Identication
Version
0 = 150 mW nominal power consumption
3 = 200 mW
4 = 400 mW
5 = 550 mW
Contact assembly
A201 = 2 changeover contacts; silver nickel, gold-plated, against silver nickel, gold-plated
*) Coils with 400/500 mW nominal power consumption on request
Relay Code
108-98007 Rev A
All specications subject to change. Consult Tyco Electronics for latest specications. 7 of 12
Telecom-, Signal and RF Relays
D2n V23105 Relay
AXICOM
Coil Data (values at 23 °C) Ordering Information
Nominal
voltage
Unom
Operate/set voltage range Release/
reset vol-
tage
Minimum
Coil
power
Coil
Resistance
Relay
code
Tyco part
number
Minimum
voltage Umin
Maximum
voltage
Umax
Vdc Vdc Vdc Vdc mW Ω / ± 10 %
150 mW nominal power consumption, non-latching
5 4.0 11.7 0.25 150 167 V23105A5001A201 8-1393792-5
6 4.8 14.0 0.30 150 240 V23105A5002A201 8-1393792-7
9 7.2 21.0 0.45 150 540 V23105A5006A201 9-1393792-1
12 9.6 28.0 0.60 150 960 V23105A5003A201 8-1393792-8
24 19.2 56 1.20 150 3840 V23105A5005A201 9-1393792-0
200 mW nominal power consumption, non-latching
3 2.1 6.1 0.15 200 45 V23105A5308A201 1393793-5
5 3.5 10.1 0.25 200 125 V23105A5301A201 9-1393792-3
6 4.2 12.2 0.30 200 180 V23105A5302A201 9-1393792-5
9 6.3 18.2 0.45 200 405 V23105A5306A201 1393793-2
12 8.4 24.3 0.60 200 720 V23105A5303A201 9-1393792-7
24 16.8 48.6 1.20 200 2880 V23105A5305A201 9-1393792-9
48 33.6 97.2 2.40 200 11520 V23105A5307A201 1393793-3
400 mW nominal power consumption, non-latching
5 3.5 7.2 0.25 400 62 V23105A5401A201 1393793-6
6 4.2 8.6 0.30 400 90 V23105A5402A201 1393793-7
9 6.3 12.9 0.42 400 203 V23105A5406A201 1-1393793-0
12 8.4 17.2 0.60 400 360 V23105A5403A201 1393793-8
24 16.8 34.3 1.20 400 1440 V23105A5405A201 1393793-9
48 33.6 68.6 2.40 400 5760 V23105A5407A201 1-1393793-1
> 500 mW nominal power consumption, non-latching
5 3.5 6.1 0.25 695 36 V23105A5501A201 1-1393793-6
6 4.2 7.3 0.30 515 70 V23105A5502A201 1-1393793-8
9 6.3 10.9 0.45 580 140 V23105A5506A201 2-1393793-3
12 8.4 14.5 0.60 515 280 V23105A5503A201 1-1393793-9
24 16.8 29.1 1.20 550 1050 V23105A5505A201 2-1393793-1
48 33.6 58.1 2.40 575 4000 V23105A5507A201 2-1393793-4
Nominal
voltage
Operate
ing
current
Nomainal power
consumption
Resistance British
Telecom Code
Relay
code
Tyco part
number
Vdc mA Vdc mW Ω / ± 10 %
Coil versions, BT 47 type / specication T4563 C (current tested)
5 80.0 695 36 47 W / 5 V23105A5475A201 1-1393793-2
10 32.5 500 200 47 W / 9 V23105A5479A201 3-1393794-0
12 27.0 515 280 47 W / 6 V23105A5476A201 1-1393793-3
24 14.0 550 1050 47 W / 7 V23105A5477A201 1-1393793-4
48 7.0 575 4000 47 W / 8 V23105A5478A201 1-1393793-5
108-98007 Rev A
All specications subject to change. Consult Tyco Electronics for latest specications. 8 of 12
Telecom-, Signal and RF Relays
D2n V23105 Relay
AXICOM
Contact Data
Number of contacts and type 2 changeover contacts
Contact assembly single contacts
Contact material Silver-nickel, gold-covered
Limiting continuous current at max. ambient temperature 3 A
Maximum switching current 3 A
Maximum swichting voltage 220 Vdc
250 Vac
Maximum switching capacity 60 W, 125 VA
Thermoelectric potential < 10 µV
Minimum switching voltage 100 µV
Initial contact resistance / measuring condition: 10 mA / 20 mV < 100 mΩ
Electrical endurance at 230 Vac / 0.5 A
at 6 Vdc / 0.1 A
at 30 Vdc / 1 A
at 30 Vdc / 2 A
typ. 3.0 x 105 operations
typ. 2.0 x 106 operations
typ. 5.0 x 105 operations
typ. 1.0 x 105 operations
Mechanical endurance typ. 15.0 x 106 operations
UL contact ratings 30 Vdc / 1.0 A
100 Vdc / 0.3 A
125 Vac / 0.5 A for 150 mW and 200 mW coil
125 Vac / 1.0 A for 400 mW and 500 mW coil
Max. DC Load Breaking Capacity
DC Voltage [Vdc]
DC current [A]
108-98007 Rev A
All specications subject to change. Consult Tyco Electronics for latest specications. 9 of 12
Telecom-, Signal and RF Relays
D2n V23105 Relay
AXICOM
Insulation
Insulation resistance at 500 Vdc > 109 Ω
Dielectric test voltage (1 min)
between coil and contacts
between adjacent contact sets
between open contacts
1050 Vrms
750 Vrms
750 Vrms
Surge voltage resistance
according to FCC 68 (10 / 700 µs)
between coil and contacts
between adjacent contact sets
between open contactss
1500 V
1500 V
1500 V
High Frequency Data
Capacitance
between coil and contacts
between adjacent contact sets
between open contacts
max. 4 pF
max. 2 pF
max. 2 pF
RF Characteristics
Isolation at 100 / 900 MHz
Insertion loss at 100 / 900 MHz
V.S.W.R. at 100 / 900 MHz
-39.0 dB / -20.7 dB
-0.02 dB / -0.27 dB
1.04 / 1.40
General Data
Operate time at Unom typ. / max. 5 ms / 6 ms
Release time without diode in parallel, typ. / max. 4 ms / 4 ms
Release time with diode in parallel, typ. / max. 5 ms / 5 ms
Bounce time at closing contact, typ. / max. 3 ms / 5 ms
Maximum switching rate without load 50 operations/s
Ambient temperature
150 and 200 mW coil
400 mW coil
500 mW coil
-25 °C ... +85 °C
-25 °C ... +75 °C
-25 °C ... +60 °C
Thermal resistance < 85 K/W
Maximum permissible coil temperature 115 °C
Vibration resistance (function) 10 g
10 to 55 Hz
Shock resistance, half sinus, 11 ms 10 g (function)
50 g (damage)
Degree of protection / Environmental protection immersion cleanable, IP 67 / RT III
Needle flame test application time 10 s
Mounting position any
Processing information Ultrasonic cleaning is not recommended
Weight (mass) max. 6 g
Terminal coating SnCu 0.7
Resistance to soldering heat 265 °C / 10 s
All data refers to 23 °C unless otherwise specied.
108-98007 Rev A
All specications subject to change. Consult Tyco Electronics for latest specications. 10 of 12
Telecom-, Signal and RF Relays
D2n V23105 Relay
AXICOM
Packing Dimensions in mm
Tube for THT version
25 relays per tube
1‘000 relays per box
108-98007 Rev A
All specications subject to change. Consult Tyco Electronics for latest specications. 11 of 12
Telecom-, Signal and RF Relays
D2n V23105 Relay
AXICOM
IM Relays
4th generation slim line – low prole polarized 2 c/o telecom signal relay
with bifurcated contacts, available as non latching or latching relay with
1 coil. Nominal voltage range from 1.5 ... 24 V, coil power consumption of 50 ...
200 mW, latching relays with 1 coil 100 mW. The IM relay is available as
through hole and surface mount type (J-Legs and Gull Wings) and capable
to switch loads up to 60 W/62,5 VA. It is currently the only 2 A rated 4G
relay on the market. Dielectric strength fullls the Telcordia requirements
according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs).
The IM relay is tested according CECC/IECQ and certied in accordance
with IEC/EN 60950 and UL 60950.
Dimensions approx. 10 x 6 mm board space and 5.65 mm height.
P2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal voltage
range from 3 ... 24 V, coil power consumption 140 mW, latching relays
with 1 coil 70 mW. The P2 Relay is available as through hole or surface
mount type and capable to switch currents up to 5 A. Dielectric strength
fullls the Telcordia requirements according GR 1089 (2,5 kV – 2 / 10 µs)
and FCC part 68 (1,5 kV – 10 / 160 µs). The P2 relay is tested according
CECC/IECQ and certied in accordance with IEC/EN 60950 and UL 60950.
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
FX2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 coil. Nominal voltage
range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high
sensitive version, 140... 300 mW for the standard version, latching relays
with 1 coil 100 mW. The FX2 relay is available as through hole type and
capable to switch loads up to 60 W/62,5 VA. Dielectric strength fullls the
Telcordia requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC
part 68 (1,5 kV – 10 / 160 µs). The FX2 relay is tested according CECC/
IECQ and certied in accordance with IEC/EN 60950 and UL 60950.
Dimensions approx. 15 x 7,5 mm board space and 10,7 mm height.
FT2 / FU2 Relays
3rd generation non polarized, non latching 2 c/o telecom relay with bifurca-
ted contacts. Nominal voltage range from 3 ... 48 V, coil power consumption
200 ... 300 mW. Most sensitive 48 V relay. Available as through hole and
surface mount type. Dielectric strength fullls the Telcordia requirements
according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 /
160 µs). The FT2/FU2 relay is tested according CECC/IECQ and certied
in accordance with IEC/EN 60950 and UL 60950.
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
FP2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal voltage
range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the
high sensitive version, 140... 300 mW for the standard version, latching
relays with 1 coil 100 mW.. The FP2 Relay is available as through hole
type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength
fullls FCC part 68 (1,5 kV – 10 / 160 µs). The FP2 is tested according
CECC/IECQ approved.
Dimensions approx. 14 x 9 mm board space and 5 mm height.
MT2
2nd generation non polarized, non latching 2 c/o telecom and si-
gnal relay with bifurcated contacts. Nominal voltage range from 3
... 48 V, coil power consumption 150/200/300/400 and 550 mW.
Dielectric strength fulfills the requirements according FCC part 68
(1,5 kV – 10 / 160 µs).
Dimensions approx. 20 x 10 mm board space and 11 mm height.
D2n Relays
2nd generation non polarized 2 c/o relay for telecom and various other ap-
plications. Nominal voltage range from 3 ... 48 V, coil power consumption from
150 .... 500 mW. The D2n relay is capable to switch currents up to 3 A. Dielectric
strength fullls the requirements according FCC part 68 (1,5 kV – 10 / 160 µs).
Dimensions approx. 20 x10 mm board space and 11 mm height.
P1 Relays
Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a
wide range of applications, available as non latching or latching relay with
1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption
65 mW, latching relays with 1 coil 30 mW. The P1 relay is available as
through hole or surface mount type and capable to switch currents up to 1
A. Dielectric strength fullls the requirements according FCC part 68 (1,5
kV – 10 / 160 µs). Dimensions approx. 13 x 7,6 mm board space and 7
mm height for THT or 8 mm height for SMT version.
W11 Relays
Low cost, non polarized 1 c/o relay for various applications. Nominal
voltage range from 3 ... 24 V, coil power consumption 450 mW, sensitive
versions 200 mW. The W11 relay is capable to switch currents up to 3 A.
Dielectric strength 1000 Vrms.
Dimensions approx. 15,6 x 10,6 mm board space and 11,5 mm height.
Reed Relays
High sensitive, non polarized relay for telecom and various other applica-
tions, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal voltage range
from 5 ... 24 V, coil power consumption 50...280 mW for 1 n/o and 125 ...
280 mW for 2 n/o or 1 c/o versions. Reedrelays are available in DIP or
SIL housing and capable to switch currents up to 0,5 A. Integrated diode
and/or electrostatic shield optional. Dielectric strength 1500 Vdc. Dimen-
sions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for DIP or
19,8 x 5 mm board space and 7,8 mm height for SIL version.
Cradle Relays
Extremely reliable and mature relay family of 1st generation for various signal
switching applications. Available as non polarized, polarized / latching and
relay with AC coil. The benet is the possibility of combining various contact
sets from 1 up to 6 poles, single and bifurcated contacts, different contact
materials with a coil voltage range from 1,5 Vdc to 220 Vac. Cradle relays are
available as dust protected and hermetically sealed versions, with plug in or
solder terminals and are capable to switch currents up to 5 A. Forcibly guided
(linked) contact sets optional. Dielectric strength 500 Vrms. Dimensions from
approx. 19 x 24 to 19x35 mm board space and 30 mm height.
Other Relays
We offer a variety of different relay families for maintenance and replace-
ment purposes. These relays are up to 60 years old now, such as Card
Relay SN (V23030 series), Small General Purpose Relay (V23006 series),
Small Polarized Relay (V23063 ... V23067 and V23163 ... V23167 series).
Accessories like sockets, hold down springs, etc. optional.
High Frequency Relays
HF3 / HF3S / HF6 series RF relays offering excellent RF characteristics
in a small package. All HF series relays are suitable for SMD soldering
processes. Available as non latching or latching versions with 1 or 2 coils
and a nominal coil voltage range from 3 … 24 V, a coil power consumption
of 140 mW or 70 mW (single coil latching types).
HF3: Low cost RF relay suitable up to 3 GHz. Impedance 50 and 75 Ohm.
50 W hot switching and 50 W RF power carry capability.
Dimensions 14.6 x 7.3 x 10.3 mm.
HF3S: High performance, high power RF relay suitable up to 3 GHz,
50 W hot switching and 150 W RF power carry capability.
Dimensions 15 x 7.6 x 10.6 mm.
HF6: High performance, high power RF relay suitable up to 6 GHz,
50 W hot switching and 50 W RF power carry capability.
Dimensions 15 x 7.6 x 10.6 mm.
Telecom-, Signal and RF Relays
AXICOM
Tyco Electronics Logistics AG
Werk Axicom Au
Seestrasse 295
CH-8804 Au-Wädenswil / Switzerland
Phone +41 44 782 91 11
Fax +41 44 782 90 00
E-mail: axicom@tycoelectronics.com
Tyco Electronics
Paulsternstrasse 26
D-13629 Berlin / Germany
Phone +49 30 386 38573
Fax +49 30 386 38575
E-mail: axicom@tycoelectronics.com
Tyco Electronics EC Trutnov s.r.o.
Komenského 821
CZ-541 01 Trutnov / Czech Republic
E-mail: axicom@tycoelectronics.com
Tyco Electronics Corporation
POB 3608,
Harrisburg, PA 17105, USA
Phone +1 800-522-6752