Amphenol Industrial Product Group 191 Delaware Avenue Sidney, NY 13838-1395 - USA Telephone: 1-607-563-5011 * Fax: 1-607-563-5157 www.amphenol-industrial.com RRB Fis) AOA Amphenol Technology (Zhuhai) Co., Ltd. htt: Eee SK = ha BAA Tl SN EROS Address: No.63, Xinghan Rd, Phase 2, Science and Technology Industrial Park, Saozao Town, Jinwan, Zhuhai, PRC FA iG/Tel: (86) 756-3989725 {&H/Fax: (86) 756-3989768 www.amphenol-industrial.com Notice: Specifcations are subject to change without notice. Contact your nearest Amphenol Corporation Sales Offce for the latest specifcations. All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be required. Specifcations are typical and may not apply to all connectors. IC-6-1 Amphenol Amphe-HST Heat Shrinkable Tubing Catalog Industrial _Amphenol Table of Contents > |Company Introduction >| Table of Contents Thin Wall Tubing Medium & Heavy Wall Tubing A-2(Z) oo cec cee cee cence eee cee eee cee eee cence teats eee aeeeeeaee eae 01 ARTM...... cece eee ee cee cee ee nee eee eee eae eee ee tea aee seen eeeaenee 45 A-2( 3X)... cee cee cece cee eee ee eee ee eee eee eae eee eee eenaeeeeeaee ees 03 AFRA 2... .. cc cee cee cee cee eee cee ete cee nee cesses esses eneeee estes AT A-2(HF)... 20. cee cee cee cee cence eee eee eee eee eee eee eee eee aeeeeeeeaees 05 AFRAS... 2. ce cec cee cee eee eee cee cee eee cee tee eee testeenee eee see ee AQ A-2F oo eee ee cence eee eee ee entre eee cee eae tee cee aee eee een ees 07 ARTH... cece eee e eee ee eens cents tenets eee eee eae nea tee eee aee 51 A-2F (3X)... cece cece ee eee eee cece eee eee eee aee eee eeneee seen eae 09 ARA-6X... cece cee cece eee ee cee ee eee teeta nee eee esa aee eee eeaeae 53 . A-2F (4X) cc ceeceeces eee eeeneeca eee eee eee eeeanetee eee eeeeeenee ees 11 ARS... cee ee ccc cee eee ee cee eee eee eee aeecae eee tee eeeeeeeea eae eneeeeees 55 Amphenol Industrial Amphenol Technology A-2F (YG) 13 Sidney, New York Facility Zhuhai, China Facility A-2F(YG)(3X) 15 Manufacturing connectors since 1932, we take pride that the Established in 2007, Amphenol Technology (Zhuhai) Co., Ltd. is a key DV eee eee eee ee eee ee eee tees ee tteeeeeeeeeees 17 Amphenol Industrial Products Group is the undisputed leader in facility for Amphenol Industrial Products Group, which serves a number ABG am | interconnect systems for harsh environment applications. Such of industrial markets, included but not limited to Factory Automation, I 19 Medium Voltage Tubing &Tape =) applications require a high degree of engineering sophistication Transportation, Heavy Equipment, Alternative Energy, Oil & Gas, = and precision manufacturing capability. Innovations like our Server/Data Comm and Power Distribution. DAT 0. cece ce cent eee ee cee ee ee tee erate nessa sees eeeneeeeeeaenes 57 a) RADSOK contact technology can provide roughly 50% more | 2 AATA current through the same size pin. Connectors utilizing this Amphenol Technology (Zhuhai) Co., Ltd. covers an area Of 28,470 m2 I nee ene nee ee ene ees 59 = RADSOK technology will outperform similar products in the and Is equipped wan NCS: Plating. injection moteing ane assemply ABT... 0... cece cee cence cence ee een eae ceee ee eeaeeeeeaeeeeeaeaeeeetes 61 market hands down. workshops. This plant specializes in the design and manufacturing o . ie industrial connectors featuring high power, high density inserts, Dual Wall Tubing ABTH... oe cece cece cece ee eee eee ee eens eee senses eee teaneaeneeaeeetas 63 The Amphenol Industrial Products Group (AIPG), a division of the medium to high voltage electrical properties, and harsh environment A-5(BX)aF occ ccc ccc ccc cee cee cee cee ceeeeeeeeeeeeeseeceeeeeaueeeaees 41 ABIT 65 Amphenol Corporation, is the leading manufacturer of cylindrical applications. rns rm connectors in the world. Amphenol Industrial's product lines oo, . . , ; ; A-S(AX) cee cecte cee ee terete eee ee ee etnee ten eereeentnetees 23 AS CT oe ee eee eee eee eea nea nea dee eaa eee 67 consist of rectangular, standard miniature, fiber optic, EMI/EMP With industry leading engineering, design and manufacturing A-5(3X)oFoccccccecsescessssessesestesesseseessssesvaeseeseserees 25 ASC-100 oO filter, and a variety of special application connectors. expertise, Amphenol Technology (Zhuhai) Co., Ltd. has earned more FE SAMAAD TE severe ccrcre rec ccscrccccececererecccccscsccccccscessseses QQ ADOn1TQQ... cece cence eee cece eee cee eee nee ane cee eee eee nee ee 69 than 10 utility patents on its innovative interconnects. Many of the A-5(4X)-F oe ces ceccesceccessesseeceeceeceeceeerevseeseesesseeseess 27 NSC-36O ooo ooooooooocoeooooeooooooe ooo ooo ooo cece 7 a } The Sidney, NY facility, nestled at the foothills of the Catskill products produced have been certified by independent standards ABK (Ce] Mountains, is over 307,000 square feet. This complex houses including UL, IEC/TUV, ATEX, IECEx and MA. The facility is also FANN ttt tteeeecneeenncececncecerecsccretcccececnrecscescuccersseeceees 29 ADWT.... 00. cc ccc cece ec cec cee cee eee cee eeeeaeeeeeeeseeeeeeaeneneneeee 73 over 1000+ employees, incorporating state-of-the-art certified to ISO 9001, ISO 14001 and TS 16949. A-5(2000) 0.2... cee cee ccc cce eee eee cee cea eee eee cee eeesaaaeeeeeeeeees 31 AGT occ ccc ccc ccc cee cee cee ceccec ee bee bbceeeebeeeueeeeeececeeseseeeecs 75 manufacturing technologies. The facility is both 1S09001 certified and qualified to MIL-STD-790 requirements. DOT 0. ccc cec cece cece cee cee eee cee eae eae ceeeaeeeeeeeeeeeseeeeaesenes T7 Molded Parts >| Amphe-HST ASEC cee ccecessssssssssesssseessisessnseeessieeesnseeeasseeeensens 79 High Temperature Products g pe DAS occ ceececceececesceeeescesceseeseecaeceeeeeetatsteneneeneens 81 As a world technology leader in the manufacture and design of A-150K eee e rere reer eee eee ee eee ee eres 33 AMB 83 interconnects and cable assemblies, Amphenol Industrial D-1 75K. cee ccc cece ee ten ceeceeeee eee neeeeneeeeeseeeaaeenseeeess 35 AMR... ceeccecee eee see center eeeeeeeeeeeeesetseetetereeneenenennaae 85 Operations realizes there is a need for quality heat shrinkable materials. ADR... cece cece cee eee ee eee eee cee eects eee eee eee cee eee cee eee eae 37 ACF... cece cee cee cce eee eee eee eee een eee eee eeeeeeeeeeeeeeeeeenees 87 Our Amphe-HST (HST - Heat Shrink Technologies) is a heat shrink A-200E... 20. cece ccc cee cee cee ee eect eee cee eee aeeeeeaeeeaeeeneee 39 ALB... 20. e cee cee cee eee cee ee cee eee eee eee cette eee eee eeeaeeeeeaee eee 89 tubing series that is ideal, but not limited to, the markets of energy, ON al 41 ACB... ccc ccc cee ene cece eee cee eee ee ee eseeeeneeeeeeeneeeeeteeees 91 rail mass transit, heavy equipment, hybrid/electrical vehicles, server/data center power, mining and other major industries. AFSP ee eee eee eee eee eee cence eee eee eee nee nee nee eee eee eee 43 ARA2 Dee nee eee eee eee ee een eee eee eee eee nena nee tee eee tee eee 93 Made from a cross-linked polyolefin material, most of our AR2.. cece ee renee eee tence ee teats ee eens eee neeeaeee 95 shrinkable products have been tested and comply with UL/CSA, IEC, ASTM, MIL, ISO specifications. Amphe-HST provides Te 6 97 effective insulation and protection to your functional parts, ARA3 eee ee eee ee eee ee ee ee eee eee eee ee eee eee eee eee ee eee ee 99 components and systems at an affordable cost. Amphe-Mark SIG@VES.............cccceeeeceeneeeeeeeeeeennn ees 101 Along with our heat shrink tubing AlO can also provide molded parts, marker sleeves and application equipment such as heat guns, conveyor ovens and more.A-2(Z) Flexible, Flame Retardant, High Performance Tubing Amphenol Specification As supplied (mm) After recovered(mm) Standard length Black 00 Other Colors em mm ee Ecentricity | Insidediameter | Wall thickness Tube Shape (meters/roll) Amphenol P/N Description Color Code (max)(%) (max)(d) (min)(w) CUSTOMER P/N end with (XX) 1 1.0/0.5 1.0 0.5 0.32 oO 200 HST A-2(Z) 1.0/0.5 (00) A-2(Z) 1.0MM H/S TUBE 2:1 BK 2 1.5/0.75 15 0.8 0.36 200 HST A-2(Z) 1.5/0.75 (00) | A-2(Z) 1.5MM H/S TUBE 2:1 BK 3 2.0/1.0 2.0 1.0 0.40 200 HST A-2(Z) 2.0/1.0 (00) | A-2(Z) 2.0MM H/S TUBE 2:1 BK Ep 4 2.5/1.25 25 13 0.42 200 HST A-2(Z) 2.5/1.25 (00) | A-2(Z) 2.5MM H/S TUBE 2:1 BK S| Li = = 5 3.0/1.5 3.0 15 0.42 200 HST A-2(Z) 3.0/1.5 (00) | A-2(Z) 3.0MM H/S TUBE 2:1 BK / : 6 3.5/L.75 35 18 0.44 oO 200 HST A-2(Z) 3.5/1.75 (00) | A-2(Z) 3.5MM H/S TUBE 2:1 BK | xggeceeeac eZee EIDE IEEE 7 4.0/2.0 4.0 2.0 0.44 200 HST A-2(Z) 4.0/2.0 (00) | A-2(Z) 4.0MM H/S TUBE 2:1 BK 8 4.8/2.4 4.8 24 0.52 Oo 100 HST A-2(Z) 4.8/2.4 (00) A-2(Z) 4.8MM H/S TUBE 2:1 BK 9 5.0/2.5 5.0 30 2.5 0.54 100 HST A-2(Z) 5.0/2.5 (00) | A-2(Z) 5.0MM H/S TUBE 2:1 BK 10 6.0/3.0 6.0 3.0 0.54 100 HST A-2(Z) 6.0/3.0 (00) | A-2(Z) 6.0MM H/S TUBE 2:1 BK 4 7.0/3.5 7.0 3.5 0.54 o/- 100 HST A-2(Z) 7.0/3.5 (00) | A-2(Z) 7.0MM H/S TUBE 2:1 BK 12 8.0/4.0 8.0 4.0 0.54 o/- 100 HST A-2(Z) 8.0/4.0 (00) | A-2(Z) 80MM H/S TUBE 2:1 BK 13 9.0/4.5 9.0 45 0.54 o/- 100 HST A-2(Z) 9.0/4.5 (00) | A-2(Z) 9.0MM H/S TUBE 2:1 BK emo 4 10.0/5.0 10 48 0.54 - 100 HST A-2(Z) 10.0/5.0 (00) | A-2(Z) 10.0MM H/S TUBE 2:1 BK cl US $ p: YW 15 1.0/5.5 41 5.5 0.55 - 100 HST A-2Z) 11.0/5.5 (00) _| A-2(Z) 1LOMM H/STUBE2:1BK | Vena o4 (04) rms WF 16 12.0/6.0 12 6.0 0.55 - 50 HST A-2(Z) 12.0/6.0 (00) _| A-2(Z) 12.0MMH/STUBE21BK | give 06 (06) , 17 13.0/6.5 13 6.4 0.62 - 50 HST A-2(Z) 13.0/6.5 (00) | A-2(Z) 13.0MM H/S TUBE 2:1 BK Grey 08 (08) 18 14.0/7.0 14 7.0 0.67 - 50 HST A-2(Z) 14.0/7.0 (00) | A-2(Z) 14.0MM H/S TUBE 2:1BK | Red 02 (02) e Featu res . 19 15.0/7.5 15 75 0.67 - 50 HST A-2(Z) 15.0/7.5 (00) | A-2(Z) 15.0MM H/S TUBE 2:1 BK White 09 (09) 20 16.0/8.0 16 8.0 0.67 - 50 HST A-2(Z) 16.0/8.0 (00) | A-2(2)16.0MMH/STUBE2:1BK | Green 05 (05) . . , , Brown 01 (01) @ Crosslinked polyolefin lM Operating temp.: -55C to +125C 21 18.0/9.0 18 9.0 0.75 - 50 HST A-2(Z) 18.0/9.0 (00) | A-2(Z) 18.0MM H/S TUBE 2:1 BK purple 07 (07) _| @ Flame retardant Min. shrink temp.: 70C 22 20/10 20 10.0 0.75 - 50 HST A-2(Z) 20.0/10.0 (00) | A-2(Z) 20.0MM H/S TUBE 2:1 BK > mG | B Mi . full t 400C 23 22/11 22 11.0 0.75 - 50 HST A-2(Z) 22.0/11.0 (00) | A-2(Z) 22.0MM H/S TUBE 2:1 BK TT) enera purpose In. u recovery emp = 24 25/12.5 25 12.5 0.86 - 50 HST A-2(Z) 25.0/12.5 (00) | A-2(Z) 25.0MM H/S TUBE 2:1 BK } @ Flexible Shrink ratio: 2:1 25 28/14 28 14.0 0.86 - 50 HST A-2(Z) 28.0/14.0 (00) | A-2(Z) 28.0MM H/S TUBE 2:1 BK lM Wide range of colors B RoHS compliant 26 30/15 30 15.0 0.86 - 50 HST A-2(Z) 30.0/15.0 (00) | A-2(Z) 30.0MM HY/S TUBE 2:1 BK = H Voltage: 600V 27 32/16 32 16.0 0.86 - 50 HST A-2(Z) 32.0/16.0 (00) | A-2(Z) 320MM H/S TUBE 2:1 BK cat) A p p rova | Ss: 28 35/17.5 35 17.5 0.86 - 50 HST A-2(Z) 35.0/17.5 (00) | A-2(Z) 35.0MM H/S TUBE 2:1 BK 29 40/20 40 20.0 0.96 - 50 HST A-2(Z) 40.0/20.0 (00) | A-2(Z) 40.0MM H/S TUBE 2:1 BK i 30 50/25 50 25.0 0.96 - 50 HST A-2(Z) 50.0/25.0 (00) | A-2(Z) 50.0MM H/S TUBE 2:1 BK c M UL 125C VW-1 600V File No: E204071 H CSA File No.1934614 31 60/30 60 30.0 0.96 - 30 HST A-2(Z) 60.0/30.0 (00) | A-2(Z) 60.0MM H/S TUBE 2:1 BK o 32 70/35 70 35.0 1.17 - 30 HST A-2(Z) 70.0/35.0 (00) | A-2(Z) 70.0MM H/S TUBE 2:1 BK ns 33 80/40 80 40 40.0 1.17 - 30 HST A-2(Z) 80.0/40.0 (00) | A-2(Z) 80.0MM H/S TUBE 2:1 BK a } Te Cc h n i ca | p ro pe rtie Ss: 34 100/50 100 50.0 1.30 - 30 HST A-2(Z) 100.0/50.0 (00) | A-2(Z) 100.0MM H/S TUBE 2:1 BK (Ce] 35 125/62.5 125 62.5 1.30 - 15 HST A-2(Z) 125.0/62.5 (00) | A-2(Z) 125.0MM H/S TUBE 2:1 BK 36 150/75 150 75.0 1.30 - 15 HST A-2(Z) 150.0/75.0 (00) | A-2(Z) 150.0MM H/S TUBE 2:1 BK Property Test Method Typical Data Tensile strength ASTM D 2671 >14 MPa Ultimate elongation ASTM D 2671 >400% Longitudinal shrinkage UL 224 +5% Applications: a <35% (size < 50mm) Widely used in communications, electronics, automotive etc. Eccentricity ASTM D 2671 - <45% (size= 50mm) Heat aging Ordering information: Tensile strength 158C, 168 hrs. >12 MPa . . 0 Ultimate elongation >350% Standard colors: Flammability VW-1 Pass Black, Yellow, Red, Blue Voltage withstand ASTM D 2671 (AC 2500V, 1 min.) No breakdown Special colors: Volume resistance ASTM D 2671 >10140 .cm Brown,Grey,White,Green Copper stability UL 224 Pass . Packaging: Copper corrosion UL 224 No corrosion Standard packaging on spools. Cold bend test UL224(-30C, thr.) No cracking Special: 1m; 1.2m pieces are available on request. Other: Custom lengths are available, please contact our sales department for further information.Amphenol A-2(3X) Flexible, Flame Retardant, High Performance Tubing Specification As supplied (mm) After recovered(mm) Standard length Black 00 Other Colors Item a Ecentricity | Insidediameter | Wall thickness | Tube Shape meters/ro! Amphenol P/N ie Color Code Ne mm _jinsided (max)(%) (manta) (minyw) imeters/rolt) CUSTOMER Pesenvpuien AMEN IEKS) 1 1.5/0.5 15 0.5 0.45 Oo 200 HST A-2(3X) 1.5/0.5 (00) A-2(3X) 1.5MM H/S TUBE 3:1 BK 2 2.4/0.8 2.4 0.8 0.48 [e} 200 HST A-2(3X) 2.4/0.8 (00) A-2(3X) 2.4MM H/S TUBE 3:1 BK 3 3.0/1.0 3.0 1.0 0.50 Oo 200 HST A-2(3X) 3.0/1.0 (00) A-2(3X) 3.0MM H/S TUBE 3:1 BK 4 4.5/1.5 4.5 35 1.5 0.60 [e) 200 HST A-2(3X) 4.5/1.5 (00) A-2(3X) 4.5MM H/S TUBE 3:1 BK 5 6.0/2.0 6.0 2.0 0.65 oO 100 HST A-2(3X) 6.0/2.0 (00) A-2(3X) 6.0MM H/S TUBE 3:1 BK Yellow 04 (04) 6 9.0/3.0 9.0 3.0 0.75 - 100 HST A-2(3X) 9.0/3.0 (00) A-2(3X) 9.0MM H/S TUBE 3:1 BK Blue 06 (06) 7 12/4.0 12.0 4.0 0.80 - 50 HST A-2(3X) 12.0/4.0 (00) | A-2(3X) 12.0MM H/S TUBE 3:1 BK Red 02 (02) 8 18/6.0 18.0 6.0 0.90 - 50 HST A-2(3X) 19.1/6.0 (00) | A-2(3X) 19.1MM H/S TUBE 3:1 BK 9 24/8.0 24.0 8.0 1.00 - 50 HST A-2(3X) 24.0/8.0 (00) | A-2(3X) 24.0MM H/S TUBE 3:1 BK 10 39/13 39.0 13.0 1.20 - 50 HST A-2(3X) 39.0/13.0 (00) | A-2(3X) 39.0MM H/S TUBE 3:1 BK 11 50/17 50.0 40 17.0 1.29 - 50 HST A-2(3X) 50.0/17.0 (00) | A-2(3X) 50.0MM H/S TUBE 3:1 BK Features: Crosslinked polyolefin M@ Operating temp.: -55C to +125C a @ Flame retardant Min. shrink temp.: 70C =3 Ideal for color coding @ Min. full recovery temp.: 100C a } High flexibility B Shrink ratio: 3:1 = Good electrical insulation RoHS compliant Color variations @ Meets: UL224 3 m Voltage: 600V Approvals: = c oF M UL 125C VW-1 600V File No: E204071 Hi CSA File No.1934614 =) ce Technical properties: Property Test Method Typical Data . . Applications: Tensile strength ASTM D 2671 >14 MPa ; . . . . oo. . . . . . Widely used for electrical insulation and protection of in-line components, disconnected terminals, and splices with high Ultimate elongation ASTM D 2671 >400% insulation and excellent resilience. Bundle wires for flexible light-duty harnesses. Provides color-coding for wires, cables, terminal d ts. Longitudinal shrinkage UL 224 0~-10% erminals ana components <35% (size <24mm) Ord f Eccentricity ASTM D 2671 i i I " 45% (size 230mm) rdering information: Heat aging Standard colors: Tensile strength 158C, 168 hrs. >12 MPa Black Ultimate elongation >350% Flammability VW-1 Pass Special colors: Voltage withstand ASTM D 2671 (AC 2500V, 1 min.) No breakdown Yellow,Red,Blue Volume resistance ASTM D 2671 >10140 .cm Packaging: Copper stability UL 224 Pass Standard packaging on spools. . Special: 1m; 1.2m pieces are available on request. Copper corrosion UL 224 No corrosion Other: Custom lengths are available, please contact our sales department for further information.Buigny [eA UIYUL A-2(H F) Flexible, Flame Retardant, High Performance Tubing Features: Crosslinked polyolefin @ Flame retardant Halogen free RoHS compliant lM Low smoke emission Approvals: @ 125 C VW-1 600V M Operating temp.: -55C to +125C Min. shrink temp.: 70C @ Min. full recovery temp.: 100C Shrink ratio: 2:1 M Voltage: 600V M UL 125C VW-1 600V, File No: E204071 Technical properties: Property Test Method Typical Data Tensile strength ASTM D 2671 >12 MPa Ultimate elongation ASTM D 2671 >400% Longitudinal shrinkage UL 224 -6~4% Eccentricity ASTM D 2671 <30% Heat aging Tensile strength 158C, 168 hrs. >11 MPa Ultimate elongation >200% Flammability VW-1 Pass Voltage withstand ASTM D 2671(AC 2500V, 1 min.) No breakdown Volume resistance ASTM D 2671 >10140 .cm Copper stability UL 224 Pass Copper corrosion UL 224 No corrosion Amphenol It is widely used in electron, communication and automobile industry. Ordering information: Standard colors: Black, White Special colors: N/A Packaging: Standard packaging on spools. Special: 1m; 1.2m pieces are available on request. Specification As supplied (mm) After recovered(mm) Standard length Black 00 No [mm [tides SE mice | wanes | MSP mea | Arena FN bec 1 3.0/1.5 1/8 15 0.44 oO 200 HST A-2(HF) 3.0/1.5 (00) A-2(HF) 3.0MM H/S TUBE 2:1 BK 2 4.0/2.0 / 2.0 0.44 Oo 200 HST A-2(HF) 4.0/2.0 (00) A-2(HF) 4.0MM H/S TUBE 2:1 BK 3 5.0/2.5 / 2.5 0.56 100 HST A-2(HF) 5.0/2.5 (00) A-2(HF) 5.0MM H/S TUBE 2:1 BK 4 6.0/3.0 1/4 3.0 0.56 oO 100 HST A-2(HF) 6.0/3.0 (00) A-2(HF) 6.0MM H/S TUBE 2:1 BK 5 7.0/3.5 / 30 3.5 0.56 oO 100 HST A-2(HF) 7.0/3.5 (00) A-2(HF) 7.0MM H/S TUBE 2:1 BK 6 8.0/4.0 / 4.0 0.56 100 HST A-2(HF) 8.0/4.0 (00) A-2(HF) 8.0MM H/S TUBE 2:1 BK 7 9.0/4.5 / 45 0.56 100 HST A-2(HF) 9.0/4.5 (00) A-2(HF) 9.0MM H/S TUBE 2:1 BK 8 10/5.0 3/8 4.8 0.56 100 HST A-2(HF) 10.0/5.0 (00) A-2(HF) 10.0MM H/S TUBE 2:1 BK 9 12/6.0 / 6.0 0.56 50 HST A-2(HF) 12.0/6.0 (00) A-2(HF) 12.0MM H/S TUBE 2:1 BK 10 13/65 1/2 6.5 0.69 50 HST A-2(HF) 13.0/6.5 (00) A-2(HF) 13.0MM H/S TUBE 2:1 BK 11 15/7.5 / 7.5 0.69 50 HST A-2(HF) 15.0/7.5 (00) A-2(HF) 15.0MM H/S TUBE 2:1 BK 12 18/9.0 / 9.0 0.76 50 HST A-2(HF) 18.0/9.0 (00) A-2(HF) 18.0MM H/S TUBE 2:1 BK 13 20/10 3/4 10.0 0.76 50 HST A-2(HF) 20.0/10.0 (00) A-2(HF) 20.0MM H/S TUBE 2:1 BK 14 25/12.5 1 12.5 0.86 50 HST A-2(HF) 25.0/12.5 (00) A-2(HF) 25.0MM H/S TUBE 2:1 BK 15 30/15 / 15.0 0.86 50 HST A-2(HF) 30.0/15.0 (00) A-2(HF) 30.0MM H/S TUBE 2:1 BK 16 40/20 11/2 20.0 0.96 50 HST A-2(HF) 40.0/20.0 (00) A-2(HF) 40.0MM H/S TUBE 2:1 BK 17 50/25 2 25.0 0.97 50 HST A-2(HF) 50.8/25.0 (00) A-2(HF) 50.0MM H/S TUBE 2:1 BK 18 60/30 / 30.0 0.97 30 HST A-2(HF) 60.0/30.0 (00) A-2(HF) 60.0MM H/S TUBE 2:1 BK 19 80/40 3 40.0 1.17 30 HST A-2(HF) 80.0/40.0 (00) A-2(HF) 80.0MM H/S TUBE 2:1 BK 20 100/50 4 40 50.0 1.30 30 HST A-2(HF) 100.0/50.0 (00) A-2(HF) 100.0MM H/S TUBE 2:1 BK 21 125/62.5 5 62.5 1.30 15 HST A-2(HF) 125.0/62.5 (00) A-2(HF) 125.0MM H/S TUBE 2:1 BK 22 150/75 6 75.0 1.30 15 HST A-2(HF) 150.0/75.0 (00) A-2(HF) 150.0MM H/S TUBE 2:1 BK Applications: Other: Custom lengths are available, please contact our sales department for further information.A-2F Flexible, Flame Retardant, High Performance Tubing Amphenol Specification As supplied (mm) After recovered(mm) Standard length Black 00 Other Colors em mm Pee eee Ecentricity | Inside diameter Wall thickness Tube Shape (meters/roll) Amphenol P/N Description Color Code (max)(%) (max)(d) (min)(w) CUSTOMER P/N end with (XX) 1 1.2/0.6 3/64 1.2 0.6 0.40 Oo 200 HST A-2F 1.2/0.6 (00) A-2F 1.2MM H/S TUBE 2:1 BK 2 1.6/0.8 1/16 1.6 0.8 0.42 Oo 200 HST A-2F 1.6/0.8 (00) A-2F 1.6MM H/S TUBE 2:1 BK 3 24/1.2 3/32 2.4 1.2 0.48 Oo 200 HST A-2F 2.4/1.2 (00) A-2F 2.4MM H/S TUBE 2:1 BK 4 3.2/1.6 1/8 3.2 1.6 0.48 O 200 HST A-2F 3.2/1.6 (00) A-2F 3.2MM H/S TUBE 2:1 BK 5 4.8/2.4 3/16 4.8 24 0.48 oO 200 HST A-2F 4.8/2.4 (00) A-2F 4.8MM H/S TUBE 2:1 BK 30 Yellow 04 (04) 6 6.4/3.2 1/4 6.4 3.2 0.56 O 100 HST A-2F 6.4/3.2 (00) A-2F 6.4MM H/S TUBE 2:1 BK Blue 06 (06) 7 9.5/4.8 3/8 9.5 4.8 0.62 O/- 100 HST A-2F 9.5/4.8 (00) A-2F 9.5MM H/S TUBE 2:1 BK Grey 08 (08) 8 12.7/6.4 1/2 12.7 6.4 0.62 - 50 HST A-2F 12.7/6.4 (00) A-2F 12.7MM H/S TUBE 2:1 BK Red 02 (02) 9 15.9/8.0 5/8 15.9 8.0 0.68 50 HST A-2F 15.9/8.0 (00) A-2F 15.9MM H/S TUBE 2:1 BK White 09 (09) 10 | 19.1/9.5 3/4 19.1 9.5 0.68 50 HST A-2F 19.1/9.5 (00) A-2F 19.1MM H/S TUBE 2:1 BK Green 05 (05) 11 | 25.4/12.7 1 25.4 12.7 0.89 50 HST A-2F 25.4/12.7 (00) A-2F 25.4MM H/S TUBE 2:1 BK Brown 01 (01) 12 31.8/15.9 11/4 31.8 15.9 1.00 50 HST A-2F 31.8/15.9 (00) A-2F 31.8MM H/S TUBE 2:1 BK ClearX 09 13 38.1/19.1 11/2 38.1 19.1 1.00 50 HST A-2F 38.1/19.1 (00) A-2F 38.1MM H/S TUBE 2:1 BK 14 | 50.8/25.4 2 50.8 25.4 1.10 50 HST A-2F 50.8/25.4 (00) A-2F 50.8MM H/S TUBE 2:1 BK 15 | 76.2/38.1 3 76.2 40 38.1 1.20 50 HST A-2F 76.2/38.1 (00) A-2F 76.2MM H/S TUBE 2:1 BK 16 |102.0/50.8 4 102 50.8 1.35 50 HST A-2F 102.0/50.8 (00) A-2F 102.0MM H/S TUBE 2:1 BK 17 (|125.0/62.5 5 125 62.5 1.40 50 HST A-2F 125.0/62.5 (00) A-2F 125.0MM H/S TUBE 2:1 BK Features: = Crosslinked polyolefin M Operating temp.: -55C to +135C = Highly Flame retardant Min. shrink temp.: 70C = Ideal for color coding @ Min. full recovery temp.: 100C a) @ Flexible @ Shrink ratio: 2:1 = Wide range of colors M@ RoHS compliant Py) l@ Resistant to common fluids & solvents M@ Meets: SAE-AMS-DTL-23053/5 Class 1 & 3 B Voltage: 600V = Approvals: = . . . oa M UL 125C VW-1 600V, File No: E204071 HM CSA File No.1934614 a Technical properties: Property Test Method Typical Data . . Applications: Tensile strength ASTM D 2671 >14 MPa ; . . . ae oo, . . oo. Ultimate el fi ASTM D 2671 500% Widely used in both commercial and military applications for electrical insulation and protection of in-line components, me e S onga won a disconnected terminals, and splices with high insulation and excellent resilience. Bundle wires for flexible light-duty Longitudinal shrinkage UL 224 ~6~4% harnesses. Provides color-coding for wires, cables, terminals and components. 7 <30% (<50.8mm) Eccentricity ASTM D 2671 <40% (>50.8mm) . . . . Ordering information: Heat aging Tensile strength 175C, 168 hrs. >11 MPa Standard colors: Ultimate elongation >350% aI ore v. lon Red 3 Ww Flammability VW-1 Pass ack, Yellow, Ned, biue Voltage withstand ASTM D 2671(AC 2500V,1 min.) No breakdown Special colors: Dielectric strength IEC60243 >20 kV/mm Brown,Grey,White,Green,Clear Volume resistance ASTM D 2671 >1014Q .cm Copper stability UL 224 Pass Packaging: Copper corrosion UL 224 No corrosion Standard packaging on spools. Cold bend test UL224(-30C, thr.) No cracking Special: 1m; 1.2m pieces are available on request. Other: Custom lengths are available, please contact our sales department for further information.Buigny [eA UIYUL [OY F(3X) Flexible, Flame Retardant, High Performance Tubing Features: Amphenol clus @ ox 3 Crosslinked polyolefin @ Highly Flame retardant @ Flexible Excellent electrical properties Resistant to common fluids and chemicals Ideal for odd shapes Approvals: Operating temp.: -55C to +135C Min. shrink temp.: 70C Min. full recovery temp.: 100C B Shrink ratio: 3:1 RoHS compliant Meets: SAE-AMS-DTL-23053/5 Class 1 & 3 H Voltage: 600V @ UL 125C VW-1 600V, File No: E204071 Technical properties: i CSA File No.1934614 Property Test Method Typical Data Tensile strength ASTM D 2671 >14 MPa Ultimate elongation ASTM D 2671 >500% Longitudinal shrinkage UL 224 0~-10% Eccentricity ASTM D 2671 <40% Heat aging Tensile strength 175C, 168 hrs. >11 MPa Ultimate elongation >350% Flammability VW-1 Pass Voltage withstand ASTM D 2671(AC 2500V,1 min.) No breakdown Dielectric strength IEC60243 >20 kV/mm Volume resistance ASTM D 2671 >10140 .cm Copper stability UL 224 Pass Copper corrosion UL 224 No corrosion Specification As supplied (mm) After recovered(mm) Standard length Black 00 Other Colors So [nm niece SEY] minder [wont | SMO") may | Aap] onion |g 1 3.0/1.0 3.0 1.0 0.55 oO 200 HST A-2F(3X) 3.0/1.0 (00) | A-2F(3X) 3.0MM H/S TUBE 3:1 BK 2 45/15 45 15 0.60 100 HST A-2F(3X) 4.5/1.5 (00) | A-2F(3X) 4.5MM H/S TUBE 3:1 BK 3 6.0/2.0 6.0 2.0 0.65 100 HST A-2F(3X) 6.0/2.0 (00) | A-2F(3X) 6.0MM H/S TUBE 3:1 BK 4 9.0/3.0 9.0 3.0 0.75 oO 100 HST A-2F(3X) 9.0/3.0 (00) | A-2F(3X) 9.0MM H/S TUBE 3:1 BK Yellow 04 (04) 5 12/4.0 12.0 30 4.0 0.80 50 HST A-2F(3X) 12.0/4.0 (00) | A-2F(3X) 12.0MM H/S TUBE 3:1 BK Blue 06 (06) 6 15/5 15.0 5.0 0.85 50 HST A-2F(3X) 15.0/5.0 (00) | A-2F(3X) 15.0MM H/S TUBE 3:1 BK Red 02 (02) 7 18/6 18.0 6.0 0.90 50 HST A-2F(3X) 18.0/6.0 (00) | A-2F(3X) 18.0MM H/S TUBE 3:1 BK 8 24/8 24.0 8.0 1.00 50 HST A-2F(3X) 24.0/8.0 (00) | A-2F(3X) 24.0MM H/S TUBE 3:1 BK 9 39/13 39.0 13.0 1.25 50 HST A-2F(3X) 39.0/13.0 (00) | A-2F(3X) 39.0MM H/S TUBE 3:1 BK Applications: Manufactured to have outstanding physical, chemical and electrical properties. Commonly used for electrical insulation, bundling to prevent corrosion, and provide mechanical protection. Has a 3:1 shrink ratio which makes this tubing suitable for irregular and awkward shape applications. Ordering information: Standard colors: Black Special colors: Yellow,Red,Blue Packaging: Standard packaging on spools. Special: 1m; 1.2m pieces are available on request. Other: Custom lengths are available, please contact our sales department for further information.ey, mCD,@ Flexible, Flame Retardant, High Performance Tubing Amphenol Specification As supplied (mm) After recovered(mm) Standard length Black 00 mem mm Inch | Inside diameter ot oat wee Tube Shape (meters/roll) oe Description 1 19.1/4.6 3/4 19.1 45 1.65 50 HST A-2F(4X) 19.1/4.6 (00) A-2F(4X) 19.1MM H/S TUBE 4:1 BK 2 25.4/7.0 1.0 25.4 7.0 1.65 50 HST A-2F(4X) 25.4/7.0 (00) A-2F(4X) 25.4MM H/S TUBE 4:1 BK 3 32/8.0 | 11/4 32.0 8.0 1.80 50 HST A-2F(4X) 32.0/8.0 (00) A-2F(4X) 32.0MM H/S TUBE 4:1 BK 4 38.1/9.5 | 11/2 38.1 9.5 1.80 - 50 HST A-2F(4X) 38.1/9.5 (00) A-2F(4X) 38.1MM H/S TUBE 4:1 BK 5 50.8/14.0| 2.0 50.8 30.0 14.0 1.80 oO 50 HST A-2F(4X) 50.8/14.0 (00) A-2F(4X) 50.8MM H/S TUBE 4:1 BK 6 76.2/20.6| 3.0 76.2 20.6 1.80 oO 50 HST A-2F(4X) 76.2/20.6 (00) A-2F(4X) 76.2MM H/S TUBE 4:1 BK 7 102/26.7 | 4.0 102.0 26.7 1.90 oO 1.2 HST A-2F(4X) 102.0/26.7 (00) A-2F(4X) 102.0MM H/S TUBE 4:1 BK 8 115/36.8 | 41/2 115.0 36.8 1.90 oO 1.2 HST A-2F(4X) 115.0/36.8 (00) A-2F(4X) 115.0MM H/S TUBE 4:1 BK Features: Crosslinked polyolefin M Operating temp.: -55C to +135C = Highly flame retardant @ Min. shrink temp.: 70C Highly flexible Min. full recovery temp.: 100C a) Resistant to common fluids and chemicals @ High shrink ratio: 4:1 = Ideal for odd & irregular shapes M RoHS compliant UV resistant for black @ Meets: SAE-AMS-DTL-23053/5 Class 1 & 3 2 Voltage: 600V = Approvals: c oO UL 125C VW-1 600V, File No: E204071 lM CSA File No.1934614 =) . ae: Technical properties: Property Test Method Typical Data Tensile strength ASTM D 2671 >14 MPa Applications: Ultimate elongation ASTM D 2671 >500% Widely used as insulation or for repair on harnesses, cables and connectors in important markets such as military, aerospace, Longitudinal shrinkage UL 224 0~-11% and fine electronic instruments. Eccentricity ASTM D 2671 <35% . . . Ordering information: Heat aging Tensile strength 175C, 168 hrs. >11 MPa Standard colors: Ultimate elongation >350% Black Flammability VW-1 Pass Voltage withstand ASTM D 2671(AC 2500V, 1 min.) No breakdown Special colors: Dielectric strength IEC60243 >20 kV/mm Special colors are available on request. Please contact our sales department for further information Volume resistance ASTM D 2671 >10140 .cm . Cc tabili UL 224 P Packaging: opper stabil ass . . PP y Standard packaging is 1.2m. Copper corrosion UL 224 No corrosion Other: Custom lengths are available, please contact our sales department for further information.Buigny [eA UIYUL Features: ey, F(YG) Flexible, Flame Retardant, High Performance Tubing Amphenol OT FEL PLL EL ELLE L EEL ELL EL PT PEL EEK, cWAd us SP: \ 5 te fs "ECL & Crosslinked polyolefin Highly flame retardant Outstanding physical, chemical properties Excellent electrical properties lM Meets: UL 224 M@ Operating temp.: -55C to +135C @ Min. shrink temp.: 70C @ Min. full recovery temp.: 100C Shrink ratio: 2:1 HM RoHS compliant H Voltage: 600V Technical properties: l Meets: SAE-AMS-DTL-23053/5 Class 1 & 3 Property Test Method Typical Data Tensile strength ASTM D 2671 >14 MPa Ultimate elongation ASTM D 2671 >500% Longitudinal shrinkage UL 224 0~-11% <35% (<50mm) Eccentricity ASTM D 2671 <45% (250mm) Heat aging Tensile strength 175C, 168 hrs. >11 MPa Ultimate elongation >350% Flammability VW-1 Pass Voltage withstand ASTM D 2671(AC 2500V, 1 min.) No breakdown Dielectric strength IEC60243 >20 kV/mm Volume resistance ASTM D 2671 >10140 .cm Copper stability UL 224 Pass Copper corrosion UL 224 No corrosion Specification As supplied (mm) After recovered(mm) Standard length Yellow/Green 45 we _ Inside dl aa aa arr Tpeshape (meters/roll) cUSTOMER Pescription 1 2.4/1.2 2.4 1.2 0.42 Oo 200 HST A-2F(YG) 2.4/1.2 (45) A-2F(Y/G) 2.4MM H/S TUBE 2:1 Y/G 2 3.2/1.6 3.2 1.6 0.42 oO 200 HST A-2F(YG) 3.2/1.6 (45) A-2F(Y/G) 3.2MM H/S TUBE 2:1 Y/G 3 4.8/2.4 4.8 2.4 0.52 Oo 100 HST A-2F(YG) 4.8/2.4 (45) A-2F(Y/G) 4.8MM H/S TUBE 2:1 Y/G 4 6.4/3.2 6.4 3.2 0.54 Oo 100 HST A-2F(YG) 6.4/3.2 (45) A-2F(Y/G) 6.4MM H/S TUBE 2:1 Y/G 5 8.0/4.0 8.0 4.0 0.54 100 HST A-2F(YG) 8.0/4.0 (45) A-2F(Y/G) 8.0MM H/S TUBE 2:1 Y/G 6 9.5/4.8 9.5 30 4.8 0.54 100 HST A-2F(YG) 9.5/4.8 (45) A-2F(Y/G) 9.5MM H/S TUBE 2:1 Y/G 7 12.7/6.4 12.7 6.4 0.62 50 HST A-2F(YG) 12.7/6.4 (45) A-2F(Y/G) 12.7MM H/S TUBE 2:1 Y/G 8 16.0/8.0 16.0 8.0 0.67 50 HST A-2F(YG) 16.0/8.0 (45) A-2F(Y/G) 16.0MM H/S TUBE 2:1 Y/G 9 18/9.0 18.0 9.0 0.76 50 HST A-2F(YG) 18.0/9.0 (45) A-2F(Y/G) 18.0MM H/S TUBE 2:1 Y/G 10 19.1/9.5 19.1 9.5 0.76 50 HST A-2F(YG) 19.1/9.5 (45) A-2F(Y/G) 19.1MM H/S TUBE 2:1 Y/G 11 25.4/12.7 25.4 12.7 0.86 50 HST A-2F(YG) 25.4/12.7 (45) A-2F(Y/G) 25.4MM H/S TUBE 2:1 Y/G 12 31.8/15.9 31.8 15.9 0.86 50 HST A-2F(YG) 31.80/15.9 (45) A-2F(Y/G) 31.8MM H/S TUBE 2:1 Y/G 13 38.1/19.1 38.1 19.1 0.97 30 HST A-2F(YG) 38.1/19.1 (45) A-2F(Y/G) 38.1MM H/S TUBE 2:1 Y/G 14 50.8/25.4 50.8 25.4 0.97 30 HST A-2F(YG) 50.8/25.4 (45) A-2F(Y/G) 50.8MM H/S TUBE 2:1 Y/G 15 76.2/38.1 76.2 40 38.1 1.17 30 HST A-2F(YG) 76.2/38.1 (45) A-2F(Y/G) 76.2MM H/S TUBE 2:1 Y/G 16 101.6/50.8 101.6 50.8 1.30 30 HST A-2F(YG) 101.6/50.8 (45) A-2F(Y/G) 101.6MM H/S TUBE 2:1 Y/G Applications: Manufactured to have outstanding physical, chemical and electrical properties this tubing is easy to install and allows for quick identification of ground conductors. Ordering information: Standard colors: Yellow&Green Special colors: N/A Packaging: Standard packaging on spools. Special: 1m; 1.2m pieces are available on request. Other: Custom lengths are available, please contact our sales department for further information.[OY F(YG)(3X) Flexible, Flame Retardant, High Performance Tubing Amphenol Specification As supplied (mm) After recovered(mm) Standard length Yellow/Green 45 cm ay. Ecentricity | Insidedi Wall thickness | Tube Shape Peter Amphenol P/N ipti No mm_| Inch |Inside (man) (may)(d) aa (meters/roll) RUSTOMER Description 1 2.4/0.8 | 3/32 24 0.8 0.51 Oo 200 HST A-2F(3X)YG 2.4/0.8 (45) A-2F(Y/G) 2.4MM H/S TUBE 3:1 Y/G 2 3.2/1.0 | 1/8 3.2 1.0 0.55 O 200 HST A-2F(3X)YG 3.2/1.0 (45) A-2F(Y/G) 3.2MM H/S TUBE 3:1 Y/G 3 4.8/1.5 | 3/16 48 1.5 0.60 fe) 100 HST A-2F(3X)YG 4.8/1.5 (45) A-2F(Y/G) 4.8MM H/S TUBE 3:1 Y/G 4 6.4/2.0 | 1/4 6.4 2.0 0.65 O 100 HST A-2F(3X)YG 6.4/2.0 (45) A-2F(Y/G) 6.4MM H/S TUBE 3:1 Y/G Qo 5 9.5/3.0 | 3/8 9.5 30 3.0 0.75 100 HST A-2F(3X)YG 9.5/3.0 (45) A-2F(Y/G) 9.5MM H/S TUBE 3:1 Y/G 4 6 12.7/4.0| 1/2 12.7 4.0 0.80 50 HST A-2F(3X)YG 12.7/4.0 (45) A-2F(Y/G) 12.7MM H/S TUBE 3:1 Y/G 7 19.1/6.0 | 3/4 19.1 6.0 0.90 50 HST A-2F(3X)YG 19.1/6.0 (45) A-2F(Y/G) 19.1MM H/S TUBE 3:1 Y/G 8 25.4/8.0 1 25.4 8.0 1.00 50 HST A-2F(3X)YG 25.4/8.0 (45) A-2F(Y/G) 25.4MM H/S TUBE 3:1 Y/G 9 39.1/13.0| 11/2 39.1 35 13.0 1.20 50 HST A-2F(3X)YG 39.0/13.0 (45) A-2F(Y/G) 39.0MM H/S TUBE 3:1 Y/G @ er Y cd us SP: wed ar Features: Crosslinked polyolefin @ Operating temp.: -55C to +135C a Highly flame retardant Min. shrink temp.: 70C utstanding physical, chemical properties in. full recovery temp.: X =3 l Outstanding physical, ch | rt @ Min. full t 100C 5 @ Excellent electrical properties B Shrink ratio: 3:1 M Meets: UL 224 H RoHS compliant = @ Meets: SAE-AMS-DTL-23053/5 Class 1 & 3 ie H Voltage: 600V = c a =) : ae: Technical properties: Property Test Method Typical Data Tensile strength ASTM D 2671 >14 MPa A licati Ications: Ultimate elongation ASTM D 2671 >500% PP _ " 0 Manufactured to have outstanding physical, chemical and electrical properties this tubing is easy to install and allows for Longitudinal shrinkage UL 224 O~-11% quick identification of ground conductors. E tricit ASTM D 2671 sere (seo) ccentricl . . . Y <45% (250mm) Ordering information: Heat aging . Tensile strength 175C, 168 hrs. >11 MPa Standard colors: Ultimate elongation >350% Yellow&Green Flammability VW-1 Pass Special colors: Voltage withstand ASTM D 2671(AC 2500V, 1 min.) No breakdown N/A Dielectric strength IEC60243 >20 kV/mm Packaging: Volume resistance ASTM D 2671 >1014Q .cm Standard packaging on spools. C abil UL 204 P Special: 1m; 1.2m pieces are available on request. opper stan ass Other: Custom lengths are available, please contact our sales department for further information. Copper corrosion UL 224 No corrosionBuigny [eA UIYUL pe Flexible, Flame Retardant, High Performance Tubing Features: Amphenol Crosslinked polyolefin M Commercial grade Excellent electrical and physical properties Bright shiny black @ Clear is 100% transparent Technical properties: M Operating temp.: -55C to +105C @ Min. shrink temp.: 70C @ Min. full recovery temp.: 95C Shrink ratio: 2:1 H RoHS compliant B Voltage: 600V Property Test Method Typical Data Tensile strength ASTM D 2671 >12 MPa Ultimate elongation ASTM D 2671 >400% Longitudinal shrinkage UL 224 O0~-8% . <30% (the size < 50mm) Eccentricity ASTM D 2671 - <40% (the size = 50mm) Heat aging Tensile strength 136C, 168 hrs. >11 MPa Ultimate elongation >200% Flammability Flammable Voltage withstand ASTM D 2671 (AC 2500V, 1 min.) No breakdown Volume resistance ASTM D 2671 >10140 .cm Copper stability UL 224 Pass Copper corrosion UL 224 No corrosion Specification As supplied (mm) After recovered(mm) Standard length Black 00 Other Colors Tio mm Inside di on oat wane Tube Shape (meters/roll) mn Description Renan 1 1.0/0.5 1.0 0.5 0.32 oO 200 HST A-1 1.0/0.5 (00) A-11.0MM H/S TUBE 2:1 BK 2 1.5/0.75 15 0.75 0.32 Oo 200 HST A-1 1.5/0.75 (00) A-11.5MM H/S TUBE 2:1 BK 3 2.0/1.0 2.0 1.0 0.40 Oo 200 HST A-1 2.0/1.0 (00) A-1 2.0MM H/S TUBE 2:1 BK 4 2.5/1.25 2.5 1.25 0.44 O 200 HST A-1 2.5/1.25 (00) A-1 2.5MM H/S TUBE 2:1 BK 5 3.0/1.5 3.0 1.5 0.44 oO 200 HST A-1 3.0/1.5 (00) A-1 3.0MM H/S TUBE 2:1 BK 6 3.5/1.75 3.5 1.75 0.44 O 200 HST A-1 3.5/1.75 (00) A-1 3.5MM H/S TUBE 2:1 BK 7 4.0/2.0 4.0 2.0 0.44 oO 200 HST A-1 4.0/2.0 (00) A-1 4.0MM H/S TUBE 2:1 BK 8 5.0/2.5 5.0 2.5 0.56 100 HST A-1 5.0/2.5 (00) A-1 5.0MM H/S TUBE 2:1 BK 9 6.0/3.0 6.0 30 3.0 0.56 oO 100 HST A-1 6.0/3.0 (00) A-16.0MM H/S TUBE 2:1 BK 10 7.0/3.5 7.0 3.5 0.56 Oo 100 HST A-1 7.0/3.5 (00) A-1 7.0MM H/S TUBE 2:1 BK 11 8.0/4.0 8.0 4.0 0.56 - 100 HST A-1 8.0/4.0 (00) A-1 8.0MM H/S TUBE 2:1 BK 12 9.0/4.5 9.0 45 0.56 - 100 HST A-1 9.0/4.5 (00) A-1 9.0MM H/S TUBE 2:1 BK 13 10.0/5.0 10.0 5.0 0.56 - 100 HST A-1 10.0/5.0 (00) A-1 10.0MM H/S TUBE 2:1 BK 14 11.0/5.5 11.0 5.5 0.56 - 100 HST A-1 11.0/5.5 (00) A-111.0MM H/S TUBE 2:1 BK 15 12.0/6.0 12.0 6.0 0.56 - 100 HST A-1 12.0/6.0 (00) A-1 12.0MM H/S TUBE 2:1 BK Clear X (X) 16 13.0/6.5 13.0 6.5 0.56 - 50 HST A-1 13.0/6.5 (00) A-113.0MM H/S TUBE 2:1 BK 17 14.0/7.0 14.0 7.0 0.69 - 50 HST A-1 14.0/7.0 (00) A-1 14.0MM H/S TUBE 2:1 BK 18 15.0/7.5 15.0 7.5 0.69 - 50 HST A-1 15.0/7.5 (00) A-1 15.0MM H/S TUBE 2:1 BK 19 16.0/8.0 16.0 8.0 0.69 - 50 HST A-1 16.0/8.0 (00) A-1 16.0MM H/S TUBE 2:1 BK 20 18.0/9.0 18.0 9.0 0.76 - 50 HST A-1 18.0/9.0 (00) A-1 18.0MM H/S TUBE 2:1 BK 21 20.0/10.0 20.0 10.0 0.76 - 50 HST A-1 20.0/10.0 (00) A-1 20.0MM H/S TUBE 2:1 BK 22 22.0/11.0 22.0 11.0 0.76 - 50 HST A-1 22.0/11.0 (00) A-1 22.0MM H/S TUBE 2:1 BK 23 28.0/14.0 28.0 14.0 0.86 - 50 HST A-1 25.0/12.5 (00) A-1 25.0MM H/S TUBE 2:1 BK 24 30.0/15.0 30.0 15.0 0.86 - 50 HST A-1 28.0/14.0 (00) A-1 28.0MM H/S TUBE 2:1 BK 25 32.0/16.0 32.0 16.0 0.86 - 50 HST A-1 30.0/15.0 (00) A-1 30.0MM H/S TUBE 2:1 BK 26 35.0/17.5 35.0 17.5 0.86 - 50 HST A-1 35.0/17.5 (00) A-1 35.0MM H/S TUBE 2:1 BK 27 40.0/20.0 40.0 20.0 0.97 - 50 HST A-1 40.0/20.0 (00) A-1 40.0MM H/S TUBE 2:1 BK 28 50.0/25.0 50.0 25.0 0.97 - 50 HST A-1 50.0/25.0 (00) A-1 50.0MM H/S TUBE 2:1 BK 29 60.0/30.0 60.0 30.0 0.97 - 30 HST A-1 60.0/30.0 (00) A-1 60.0MM H/S TUBE 2:1 BK 30 70.0/35.0 70.0 35.0 1.17 - 30 HST A-1 70.0/35.0 (00) A-1 70.0MM H/S TUBE 2:1 BK 31 80.0/40.0 80.0 40 40.0 1.17 - 30 HST A-1 80.0/40.0 (00) A-1 80.0MM H/S TUBE 2:1 BK 32 100.0/50.0 100.0 50.0 1.3 - 30 HST A-1 100.0/50.0 (00) A-1100.0MM H/S TUBE 2:1 BK Applications: Commercial grade heat shrink tubing for general applications where flame-retardant properties are not needed, but electrical insulation and mechanical performance are paramount. Ordering information: Standard colors: Clear, Black Special colors: N/A Packaging: Standard packaging on spools. Special: 1m; 1.2m pieces are available on request. Other: Custom lengths are available, please contact our sales department for further information.Buigny [eA UIYUL ABG Fieexible, Flame Retardant, High Performance Tubing Features: FEEL ELE I LLL LIP ELL LL EL LLL ES / QTE A N if Pd iy Crosslinked polyolefin Industry specific design @ Excellent shrinking properties Outstanding physical properties Technical properties: Amphenol Hot melt adhesive at Specification As supplied (mm) After recovered(mm) Standard length Yellow 04 No [mm [nica mice | wanes | TH*SWP | mr Arbon FN bec 1 12.7/6.4 12.7 6.4 0.62 100 HST ABG 12.7/6.4 (04) ABG 12.7MM H/S TUBE 2:1 YE 2 23.0/9.5 23.0 9.5 0.65 100 HST ABG 23.0/9.5 (04) ABG 23.0MM H/S TUBE 2:1 YE 3 27.5/12.7 27.5 12.7 0.70 100 HST ABG 27.5/12.7 (04) ABG 27.5MM H/S TUBE 2:1 YE 4 29.0/12.7 29.0 12.7 0.70 50 HST ABG 29.0/12.7 (04) ABG 29.0MM H/S TUBE 2:1 YE 5 31.8/15.0 31.8 15.0 0.80 50 HST ABG 31.8/15.0 (04) ABG 31.8MM H/S TUBE 2:1 YE 6 33.5/16.0 33.5 30 16.0 0.80 50 HST ABG 33.5/16.0 (04) ABG 33.5MM H/S TUBE 2:1 YE 7 40.5/19.0 40.5 19.0 0.80 50 HST ABG 40.5/19.0 (04) ABG 40.5MM H/S TUBE 2:1 YE 8 50.8/25.4 50.8 25.4 0.80 50 HST ABG 50.8/25.4 (04) ABG 50.8MM H/S TUBE 2:1 YE 9 65.0/32.5 65.0 32.5 1.20 50 HST ABG 65.0/32.5 (04) ABG 65.0MM H/S TUBE 2:1 YE 10 76.0/38.1 76.0 38.1 1.20 50 HST ABG 76.0/38.1 (04) ABG 76.0MM H/S TUBE 2:1 YE M@ Operating temp.: -55C to +125C @ Min. shrink temp.: 80C @ Min. full recovery temp.: 110C M@ RoHS compliant Property Test Method Typical Data Tensile strength ASTM D 2671 >12 MPa Ultimate elongation ASTM D 2671 >500% Longitudinal shrinkage UL 224 +2~-8% Eccentricity ASTM D 2671 <35% Heat aging Tensile strength 158C, 168 hrs. >11 MPa Ultimate elongation >200% Voltage withstand ASTM D 2671 (AC 2500V, 1 min.) No breakdown Volume resistance ASTM D 2671 >10140 .cm Copper stability UL 224 Pass Copper corrosion UL 224 No corrosion Printability Hot stamp/Ink jet/Offset printing Very good Applications: Suitable for the application of protecting flexible gas pipes. Ordering information: Standard colors: Lemon Yellow Special colors: N/A Packaging: Standard packaging on spools. Special: 1m; 1.2m pieces are available on request. Other: Custom lengths are available, please contact our sales department for further information.A-5(3X) Flexible, Flame Retardant, High Performance Tubing Amphenol Specification As supplied (mm) After recovered(mm) Standard length Black 00 Other Colors Item Rah Ecentricity | Insidedi all thickness | Tube Shape Amphenol P/N i Color Code Ne mm __[insided (max)(%) rate " (min) imeters/roll CUSTOMER Pesenpwn ANTen CWE DNAs) 1 3.0/1.0 3.0 1.0 0.95 Oo 200 HST A-5(3X) 3.0/1.0 (00) A-5(X) 3.0MM H/S TUBE WITH ADHESIVE 3:1 BK | 2 4.8/1.5 4.8 1.5 1.10 oO 100 HST A-5(3X) 4.8/1.5 (00) A-5(3X) 48MM H/S TUBE WITH ADHESIVE 3:1 BK - - & 3 6.0/2.0 6.0 2.0 1.20 100 HST A-5(3X) 6.0/2.0 (00) | A-S(@X)60MMH/S TUBE WITH ADHESIVE 3:1 BK J co /.. melt adnesive 4 9.0/3.0 9.0 3.0 1.30 50 HST A-5(3X) 9.0/3.0 (00) | A-5(@X)90MMH/S TUBE WITH ADHESIVE 3:1 BK 5 12.0/4.0 12.0 4.0 1.60 oO 25 HST A-5(3X) 12.0/4.0 (00) | A-5(3X) 120MM H/S TUBE WITH ADHESIVE 3:1 BK Buco sey 6 15.0/5.0 15.0 35 5.0 1.60 Oo 25 HST A-5(3X) 15.0/5.0 (00) | A-5@X) 150MM H/S TUBE WITH ADHESIVE 3:1 BK Red02 (02) 7 19.0/6.0 19.0 6.0 2.00 oO 25 HST A-5(3X) 19.0/6.0 (00) | A-5(3X)19.0MM H/S TUBE WITH ADHESIVE 3:1 BK 8 24.0/8.0 24.0 8.0 2.40 oO 25 HST A-5(3X) 24.0/8.0 (00) | A-5(3X) 240MM H/S TUBE WITH ADHESIVE 3:1 BK 9 30.0/10.0 30.0 10.0 2.40 oO 25 HST A-5(3X) 30.0/10.0 (00) | A-5(3X) 30.0MM H/S TUBE WITH ADHESIVE 3:1 BK 10 40.0/13.0 40.0 13.0 2.40 oO 25 HST A-5(3X) 40.0/13.0 (00) | A-5(@X)40.0MM H/S TUBE WITH ADHESIVE 3:1 BK 11 50.0/19.0 50.0 19.0 2.40 oO 25 HST A-5(3X) 50.0/19.0 (00) | A-5(3X) 50.0MM H/S TUBE WITH ADHESIVE 3:1 BK $ 3 * y ROHS, E] Ws @ Features: Crosslinked adhesive lined polyolefin M Operating temp.: -55C to +125C iw @ Flame retardant @ Min. shrink temp.: 80C 7 @ Co-extrusion technology @ Min. full recovery temp.: 110C oe Excellent sealing and insulation properties B Shrink ratio: 3:1 Bonds perfectly to various wire jackets B RoHS compliant = UV resistant for black lM Meets: SAE-AMS-DTL-23053/4 pe) H Voltage: 600V = Approvals: = = M UL125C VW-1 600V, File No: E204071 lH CSA File No.1934614 =) . wae: To! Technical properties: Property Test Method Typical Data Property of jacket Tensile strength ASTM D 2671 >12 MPa Ultimate elongation ASTM D 2671 >400% Applications: Longitudinal shrinkage UL 224 0~-10% Designed to provide excellent properties of both insulation and sealing. Widely used to protect auto wires, shipping cables, Eccentricity ASTM D 2671 <40% bundled wires, and metal tubes against water and moisture. Heat aging Ordering information: Tensile strength 158C, 168 hrs. >11 MPa Ultimate elongation >350% Flammability VW-1 Pass srandar colors: jac Voltage withstand ASTM D 2671(AC 2500V, 1 min.) No breakdown Volume resistance ASTM D 2671 >10140 .cm Special colors: Copper stability UL 224 Pass Yellow, Blue, Red Copper corrosion UL 224 No corrosion Packaging: P vty of adhesi Standard packaging on spools. rope yora ee Special: 1m; 1.2m pieces are available on request. Ring-ball soft point ASTM E28 105+5C Other: Custom lengths are available, please contact our sales department for further information.LU Te Lt MLV Ware A-5(4X) Flexible, Flame Retardant, High Performance Tubing Features: ] / EET Ale Hot melt adhesive no} Je VIEILLE, Crosslinked adhesive lined polyolefin M@ Flame retardant @ Co-extrusion technology Excellent sealing and insulation properties Bonds perfectly to various wire jackets @ UV resistant for black Approvals: M Operating temp.: -55C to +125C M@ Min. shrink temp.: 80C @ Min. full recovery temp.: 110C B Shrink ratio: 4:1 B RoHS compliant @ Meets: SAE-AMS-DTL-23053/4 HM Voltage: 600V @ UL125C VW-1 600V, File No: E204071 Technical properties: lM CSA File No.1934614 Amphenol Property Test Method Typical Data Property of jacket Tensile strength ASTM D 2671 >12 MPa Ultimate elongation ASTM D 2671 >400% Longitudinal shrinkage UL 224 O~-10% Eccentricity ASTM D 2671 <40% Heat aging Tensile strength 158C, 168 hrs. >11 MPa Ultimate elongation >350% Flammability VW-1 Pass Voltage withstand ASTM D 2671(AC 2500V, 1 min.) No breakdown Volume resistance ASTM D 2671 >10140 .cm Copper stability UL 224 Pass Copper corrosion UL 224 No corrosion Property of adhesive Ring-ball soft point ASTM E28 105+5C Specification As supplied (mm) After recovered(mm) Standard length Black 00 Other Colors No mm Inch | Insidediameter ot moe) cl wane Tube Shape (meters/roll) - Description Peer 1 4.0/1.0 3/16 4.0 1.0 1.15 Oo 200 HST A-5(4X) 4.0/1.0 (00) A-5(4X) 4.0MM H/S TUBE WITH ADHESIVE 4:1 BK. 2 6.0/1.5 1/4 6.0 15 1.35 oO 100 HST A-5(4X) 6.0/1.5 (00) A-5(4X) 6.0MM H/S TUBE WITH ADHESIVE 4:1 BK 3 8.0/2.0 | 5/16 8.0 2 1.65 100 HST A-5(4X) 8.0/2.0 (00) | A-5(4X) 80MM H/S TUBE WITH ADHESIVE 4:1 BK 4 12.0/3.0 1/2 12.0 3 2.00 Oo 25 HST A-5(4X) 12.0/3.0 (00) | A-5(4X) 12.0MM H/S TUBE WITH ADHESIVE 4:1 BK Yellow 04 (04) 5 16.0/40| 5/8 16.0 40 4.0 2.00 oO 25 HST A-5(4X) 16.0/4.0 (00) | A-5(4X) 160MM H/S TUBE WITH ADHESIVE 4:1 BK! Biye06 (06) 6 19.0/445| 3/4 19.0 4.45 2.30 Oo 25 HST A-5(4X) 19.0/4.45 (00) | A-5(4X) 19.0MM H/S TUBE WITH ADHESIVE 4:1BK| Red 02 (02) 7 24.0/6.0 1 24.0 6.0 2.50 oO 25 HST A-5(4X) 24.0/6.0 (00) | A-5(4X) 24.0MM H/S TUBE WITH ADHESIVE 4:1 BK 8 32.0/8.0 | 11/4 32.0 8.0 2.80 oO 25 HST A-5(4X) 32.0/8.0 (00) | A-5(4X) 32.0MM H/S TUBE WITH ADHESIVE 4:1 BK 9 52.0/13.0 2 52.0 13.0 2.90 oO 25 HST A-5(4X) 52.0/13.0 (00) | A-5(4X) 52.0MM H/S TUBE WITH ADHESIVE 4:1 BK Applications: Designed to provide excellent properties of both insulation and sealing. Widely used to protect auto wires, shipping cables, bundled wires, and metal tubes against water and moisture. Ordering information: Standard colors: Black Special colors: Yellow,Red,Blue Packaging: Standard packaging on spools. Special: 1m; 1.2m pieces are available on request. Other: Custom lengths are available, please contact our sales department for further information.Amphenol A-5(3X)-F Flexible, Flame Retardant, High Performance Tubing Specification As supplied (mm) After recovered(mm) Standard length Black 00 Other Colors nm cava (|| faay |Rrsteg Ecentricity | Inside diameter Wall thickness Tube Shape Gacteral) Amphenol P/N Description Color Code (max)(%) (max)(d) (min)(w) CUSTOMER P/N end with (XX) 1 3.0/1.0 1/8 3.0 1.0 1.00 O 200 HST A-5(3X)-F 3.0/1.0 (00) | A-5(3X)-F 3.0MM H/S TUBE WITH ADHESIVE 3:1 BK 2 4.8/1.5 | 3/16 4.8 1.5 1.00 oO 100 HST A-5(3X)-F 4.8/1.5 (00) | A-5(3X)-F 4.8MM H/S TUBE WITH ADHESIVE 3:1 BK 3 6.0/2.0 1/4 6.0 35 2.0 1.00 O 100 HST A-5(3X)-F 6.0/2.0 (00) | A-5(3X)-F 6.0MM H/S TUBE WITH ADHESIVE 3:1 BK 4 9.0/3.0 | 3/8 9.0 3.0 1.35 50 HST A-5(3X)-F 9.0/3.0 (00) | A-5(3X)-F 9.0MM H/S TUBE WITH ADHESIVE 3:1 BK | Yellow 04 (04) 5 12.0/4.0| 1/2 12.0 4.0 1.65 O 25 HST A-5(3X)-F 12.0/4.0 (00) | A-5(3X)-F 12.0MM H/S TUBE WITH ADHESIVE 3:1 BK ecop oo, Hot melt adhesive 6 19.0/6.0| 3/4 19.0 6.0 2.10 25 HST A-5(3X)-F 19.0/6.0 (00) | A-5(3X)-F 19.0MM H/S TUBE WITH ADHESIVE 3:1 BK (02) 7 24.0/8.0 1 24.0 40 8.0 2.35 oO 25 HST A-5(3X)-F 24.0/8.0 (00) | A-5(3X)-F 24.0MM H/S TUBE WITH ADHESIVE 3:1 BK 8 40.0/13.0} 11/2 40.0 13.0 2.40 oO 25 HST A-5(3X)-F 40.0/13.0 (00) | A-5(3X)-F 40.0MM H/S TUBE WITH ADHESIVE 3:1 BK , wo cWd us i Y< 5 Features: @ Crosslinked adhesive lined polyolefin M@ Operating temp.: -55C to +125C Le) Co-extrusion technology Min. shrink temp.: 70C i @ Excellent electrical and mechanical @ Min. full recovery temp.: 110C ta} : : : : : : i Excellent sealing and insulation properties B Shrink ratio: 3:1 = UV resistance MM RoHS compliant Py) Highly flame retardant Meets: SAE-AMS-DTL-23053/4 B Voltage: 600V = Approvals: = . , ; ao M UL125C VW-1 600V, File No: E204071 B CSA File No.1934614 [hl =) Technical properties: Property Test Method Typical Data Property of jacket . . . e _ Applications: Tensile strength ASTM D 2671 >12 MPa Designed to provide both insulation and sealing for protected articles. Typical applications are environmental sealing of Ultimate elongation ASTM D 2671 >400% : . : : : og . . electrical components, such as wire splices and harnesses in the automotive and communications industries. Longitudinal shrinkage UL 224 0~-10% Heat aging Tensile strength 158C/168 hrs. >11 MPa . Ultimate elongation >350% Standard colors: Black Flammability VW-1 Pass Voltage withstand ASTM D 2671/AC 2500V/1 min. No breakdown Special colors: Volume resistance ASTM D 2671 >10140 cm Yellow,Red,Blue Copper stabilit UL 224 Pass . PP y Packaging: Copper corrosion UL 224 No corrosion Standard packaging on spools. Property of adhesive Special: 1m; 1.2m pieces are available on request. Ring-ball soft point ASTM E28 105+5 Other: Custom lengths are available, please contact our sales department for further information.LU Te Lt MLV Ware A-5(4X)-F Flexible, Flame Retardant, High Performance Tubing Features: Amphenol @ Crosslinked adhesive lined polyolefin Co-extrusion technology @ Excellent electrical and mechanical Excellent sealing and insulation properties @ UV resistance Highly flame retardant Approvals: M@ Operating temp.: -55C to +125C Min. shrink temp.: 70C @ Min. full recovery temp.: 110C Shrink ratio: 4:1 MM RoHS compliant M@ Meets: SAE-AMS-DTL-23053/4 Voltage: 600V m UL125C VW-1 600V, File No: E204071 Technical properties: CSA File No.1934614 Property Test Method Typical Data Property of jacket Tensile strength ASTM D 2671 >12 MPa Ultimate elongation ASTM D 2671 >400% Longitudinal shrinkage UL 224 0~-10% Eccentricity ASTM D 2671 <40% Heat aging Tensile strength 158C/168 hrs. >11 MPa Ultimate elongation >350% Flammability VW-1 Pass Voltage withstand ASTM D 2671/AC 2500V/1 min. No breakdown Volume resistance ASTM D 2671 >10'40 .cm Copper stability UL 224 Pass Copper corrosion UL 224 No corrosion Property of adhesive Ring-ball soft point ASTM E28 105+5C Specification As supplied (mm) After recovered(mm) Standard length Black 00 Other Colors [som oh [st ics wes | MH) oar | ASE pen me 1 4.0/1.0 3/16 4.0 1.0 1.10 Oo 200 HST A-5(4X)-F 4.0/1.0 (00) A-5(4X)-F 4.0MM H/S TUBE WITH ADHESIVE 4:1 BK 2 6.0/1.5 1/4 6.0 1.5 1.10 100 HST A-5(4X)-F 6.0/1.5 (00) | A-5(4X)-F 6.0MM H/S TUBE WITH ADHESIVE 4:1 BK 3 8.0/2.0 5/16 8.0 2.0 1.10 100 HST A-5(4X)-F 8.0/2.0 (00) A-5(4X)-F 8.0MM H/S TUBE WITH ADHESIVE 4:1 BK 4 12.0/3.0 1/2 12.0 3.0 1.40 Oo 25 HST A-5(4X)-F 12.0/3.0 (00) | A-5(4X)-F 12.0MM H/S TUBE WITH ADHESIVE 4:1 BK Yellow 04 (04) 5 16.0/4.0 | 5/8 16.0 40 4.0 1.65 oO 25 HST A-5(4X)-F 16.0/4.0 (00) | A-5(4X)-F 16.0MM H/S TUBE WITH ADHESIVE 4:1BK | giue06 (06) 6 19/4.45 / 19.0 4.45 2.00 25 HST A-5(4X)-F 19.0/4.45 (00) | A-5(4X)-F 19.0MM H/S TUBE WITH ADHESIVE 4:1 BK Red 02 (02) 7 24.0/6.0 1 24.0 6.0 2.15 25 HST A-5(4X)-F 24.0/6.0 (00) | A-5(4X)-F 24.0MM H/S TUBE WITH ADHESIVE 4:1 BK 8 32.0/8.0 | 11/4 32.0 8.0 2.40 oO 25 HST A-5(4X)-F 32.0/8.0 (00) | A-5(4X)-F 32.0MM H/S TUBE WITH ADHESIVE 4:1 BK 9 52.0/13.0 2 52.0 13.0 2.40 25 HST A-5(4X)-F 52.0/13.0 (00) | A-5(4X)-F 52.0MM H/S TUBE WITH ADHESIVE 4:1 BK Applications: Designed to provide both insulation and sealing for protected articles. Typical applications are environmental sealing of electrical components, such as wire splices and harnesses in the automotive and communications industries. Ordering information: Standard colors: Black Special colors: Yellow,Red,Blue Packaging: Standard packaging on spools. Special: 1m; 1.2m pieces are available on request. Other: Custom lengths are available, please contact our sales department for further information.LU Te Lt MLV Ware ABK Flexible, Flame Retardant, High Performance Tubing Features: Hot melt adhesive Amphenol @ Crosslinked adhesive lined polyolefin B Semi-rigid High shrink ratio High performance adhesive l@ Designed for wire harnesses/splices @ Excellent mechanical properties Technical properties: M@ Operating temp.: -55C to +125C @ Min. shrink temp.: 110C @ Min. full recovery temp.: 135C @ Shrink ratio: 4:1 M@ RoHS compliant lM Voltage: 600V Property Test Method Typical Data Property of jacket Tensile strength ASTM D 2671 >12 MPa Ultimate elongation ASTM D 2671 >400% Longitudinal shrinkage UL 224 1~-11% Eccentricity ASTM D 2671 <40% Heat aging Tensile strength 158C, 168 hrs. >11 MPa Ultimate elongation >300% Flammability ASTM D 2671 Self-extinguish in 30 sec. Volume resistance ASTM D 2671 >10140 .cm Dielectric strength IEC60243 >20kV/mm Copper stability UL 224 Pass Copper corrosion UL 224 No corrosion Property of adhesive soft point ASTM E28 13545C Specification As supplied (mm) After recovered(mm) Standard length Black 00 Other Colors Item Ecentricit en a Tube Shape Amph | P/N Color Code No mm Inside di centricity | Inside Wall thickness Pp (meters/roll) mphenol P/ Description (max)(%) (max)(d) (min)(w) CUSTOMER P/N end with (XX) 1 6.0/1.27 6.0 1.27 1.30 Oo 1.22 HST ABK 6.0/1.27 (00) | ABK 6.0MM H/S TUBE WITH ADHESIVE 4:1 BK 2 8.0/1.65 8.0 35 1.65 1.52 oO 1.22 HST ABK 8.0/1.65 (00) | ABK 8.0MM H/S TUBE WITH ADHESIVE 4:1 BK ClearX (x) ear 3 12.0/2.41 12.0 2.41 1.90 Oo 1.22 HST ABK 12.0/2.41 (00) | ABK 12.0MM H/S TUBE WITH ADHESIVE 4:1 BK 4 18.0/4.45 18.0 4.45 241 Oo 1.22 HST ABK 18.0/4.45 (00) | ABK 18.0MM H/S TUBE WITH ADHESIVE 4:1 BK . . . Applications: Specially designed to protect splices and joints of wire harnesses, and other components against environmental damage. Ordering information: Standard colors: Black,Clear Special colors: N/A Packaging: Standard packaging is 1.2m. Other: Custom lengths are available, please contact our sales department for further information.LU Te Lt MLV Ware A-5(2000) Flexible, Flame Retardant, High Performance Tubing Features: Amphenol ; 2 Lie Crosslinked adhesive lined polyolefin Co-extrusion technology Excellent sealing and insulation properties Industry specific design BH Special Technical properties: @ Operating temp.: -55C to +105C & Min. shrink temp.: 100C @ Min. full recovery temp.: 120C HH RoHS compliant lM Voltage: 600V Property Test Method Typical Data Property of jacket Tensile strength ASTM D 2671 >12 MPa Ultimate elongation ASTM D 2671 >300% Longitudinal shrinkage UL 224 -2~-8% Eccentricity ASTM D 2671 <35% Heat aging Tensile strength 136C/168 hrs. >12 MPa Ultimate elongation >300% Flammability _ Flammable Deformation resistance 250% Fluid resistance AMS-DTL-23053 Pass Specification As supplied (mm) After recovered(mm) Standard length Black 00 Item ici dedi. F Tube Shape No mm Inside di Ecentricity | Insidediameter | Wall thickness Pp (meters/roll) Amphenol P/N Description (max)(%) (max)(d) (min)(w) CUSTOMER 1 6.0/4.5 6.0 4.5 1.15 oO 200 HST A-5(2000) 6.0/4.5 (00) A-5(2000) 6MM H/S TUBE WITH ADHESIVE 2:1 BK 2 8.0/6.0 8.0 6.0 1.25 oO 100 HST A-5(2000) 8.0/6.0 (00) A-5(2000) 8MM H/S TUBE WITH ADHESIVE 2:1 BK 3 10.0/7.0 10.0 30 7.0 1.25 oO 100 HST A-5(2000) 10.0/7.0 (00) A-5(2000) 10MM H/S TUBE WITH ADHESIVE 2:1 BK 4 13.0/7.8 13.0 7.8 1.45 oO 100 HST A-5(2000) 13.0/7.8 (00) | A-5(2000) 13MM H/S TUBE WITH ADHESIVE 2:1 BK 5 15.0/9.5 15.0 9.5 1.45 oO 100 HST A-5(2000) 15.0/9.5 (00) A-5(2000) 15MM H/S TUBE WITH ADHESIVE 2:1 BK Applications: 7 Manufactured with a dual wall frame that can effectively protect pipes against any kind of damage caused by vibration, friction, and corrosion, thus improving the reliability of said pipes. Ordering information: Standard colors: Black Special colors: N/A Packaging: Standard packaging on spools. Special: 1m; 1.2m pieces are available on request. Other: Custom lengths are available, please contact our sales department for further information.A-150K Flexible, Flame Retardant, High Performance Tubing Amphenol Specification As supplied (mm) After recovered(mm) Standard length Black 00 Other Colors No mm Inch | Insidediameter ot moe) cl wane Tube Shape (meters/roll) e Description Peer 1 1.2/0.6 | 3/64 1.2 0.6 0.28 O 200 HST A-150K 1.2/0.6 (00) A-150K 1.2MM H/S TUBE 2:1 BK fo Militiitiitiitittitiisitdher 2 1.6/0.8 | 1/16 1.6 0.8 0.28 oO 200 HST A-150K 1.6/0.8 (00) A-150K 1.6MM H/S TUBE 2:1 BK ; MEE 3 24/1.2 | 3/32 2.4 1.2 0.28 Oo 200 HST A-150K 2.4/1.2 (00) A-150K 2.4MM H/S TUBE 2:1 BK Ala Hot melt adhesive ol 4 3.2/1.6 1/8 3.2 1.6 0.28 Oo 200 HST A-150K 3.2/1.6 (00) A-150K 3.2MM H/S TUBE 2:1 BK YY { 5 4.8/2.4 | 3/16 4.8 40 2.4 0.28 oO 100 HST A-150K 4.8/2.4 (00) A-150K 4.8MM H/S TUBE 2:1 BK Lif? 6 6.4/3.2 1/4 6.4 3.2 0.28 Oo 1.22 HST A-150K 6.4/3.2 (00) A-150K 6.4MM H/S TUBE 2:1 BK ClearX (x) 7 8.0/4.0 | 5/16 8.0 4.0 0.33 - 1.22 HST A-150K 8.0/4.0 (00) A-150K 8.0MM H/S TUBE 2:1 BK 8 9.5/4.8 3/8 9.5 4.8 0.33 - 1.22 HST A-150K 9.5/4.8 (00) A-150K 9.5MM H/S TUBE 2:1 BK 9 12.7/6.4| 1/2 12.7 6.4 0.33 - 1.22 HST A-150K 12.7/6.4 (00) A-150K 12.7MM H/S TUBE 2:1 BK 10 19.1/9.5| 3/4 19.1 9.5 0.45 - 1.22 HST A-150K 19.1/9.5 (00) A-150K 19.1MM H/S TUBE 2:1 BK vy a | ) AM h j ih iif % ROBS sdk) . LG US Features: Crosslinked fluoropolymer M Operating temp.: -55C to +150C 2s Flexibility @ Min. full recovery temp.: 150C (Ce] @ Flame retardant M@ RoHS compliant ss @ Superior physical and mechanical properties @ Meets: SAE-AMS-DTL-23053/18 | @ Excellent chemical and solvent resistance M Voltage: 600V >) @ Excellent abrasion resistance =| Approvals: xe) is) a } I mM ULVW-1, File No: E249362 e i>) a Technical properties: e) jor Cc : o) Property Test Method Typical Data Pn 7) Tensile strength ASTM D 2671 >20 MPa . . Applications: Ultimate elongation ASTM D 2671 2150% Reliably protects solder joints, terminals and connections against most industrial fuels, solvents and chemicals. Ultimate elongation after aging 180C, 168 hrs. 2100% Heat shock UL 224 (250C, 4 hrs) No cracks, flowing or dripping Ordering information: Cold bend UL 224 (-55C, 4 hrs) No cracking Standard colors: Black, Clear Flammability UL224 (VW-1) Pass Special colors: Volume resistance ASTM D 2671 210140 .cm N/A Copper corrosion UL 224 (180C, 168 hrs.) No corrosion oo Packaging: Copper stability UL 224 (180C, 168 hrs.) No sign of degradation Standard packaging on spools and/or 1.22m. Other: Custom lengths are available, please contact our sales department for further information.A-175K Flexible, Flame Retardant, High Performance Tubing Amphenol Specification As supplied (mm) After recovered(mm) Standard length Black 00 Other Colors em mm Pee ee ee Ecentricity | Inside diameter | Wall thickness Tube Shape (meters/roll) Amphenol P/N Description Color Code (max)(%) (max)(d) (min)(w) CUSTOMER P/N end with (XX) 1 1.2/0.6 | 3/64 1.2 0.6 0.20 O 200 HST A-175K 1.2/0.6 (00) A-175K 1.2MM H/S TUBE 2:1 BK . PO LEAL, LLELLLE LLL, A OQ, 2 1.6/0.8 | 1/16 1.6 0.8 0.20 oO 200 HST A-175K 1.6/0.8 (00) A-175K 1.6MM H/S TUBE 2:1 BK . / ML A 3 2.4/1.2 | 3/32 2.4 1.2 0.23 200 HST A-175K 2.4/1.2 (00) A-175K 2.4MM H/S TUBE 2:1 BK Hot melt adhesive = 4 | 326] 18 3.2 1.6 0.23 oO 200 HST A-175K 3.2/1.6 (00) A-175K 3.2MM H/S TUBE 2:1 BK = Z Li GMM 5 48/24 | 3/16 4.8 40 2.4 0.23 oO 100 HST A-175K 4.8/2.4 (00) A-175K 4.8MM H/S TUBE 2:1 BK Clear X (X) : : : 6 6.4/3.2 1/4 6.4 3.2 0.23 Oo 1.22 HST A-175K 6.4/3.2 (00) A-175K 6.4MM H/S TUBE 2:1 BK 7 9.5/4.8 3/8 9.5 4.8 0.28 - 1.22 HST A-175K 9.5/4.8 (00) A-175K 9.5MM H/S TUBE 2:1 BK 8 12.7/64| 1/2 12.7 6.4 0.28 - 1.22 HST A-175K 12.7/6.4 (00) A-175K 12.7MM H/S TUBE 2:1 BK 9 19.1/9.5| 3/4 19.1 9.5 0.36 - 1.22 HST A-175K 19.1/9.5 (00) A-175K 19.1MM H/S TUBE 2:1 BK eM 5 Y/Y mu = CNB US Features: a. Crosslinked PVDF (polyvinylidene fluorid) MH Operating temp.: -55C to +175C @ Superior mechanical and abrasion resistance M@ Min. full recovery temp.: 175C =F @ Flame retardant M RoHS compliant @ High temperature resistance Meets: SAE-AMS-DTL-23053/18 @ Excellent chemical and solvent resistance Voltage: 600V e Semi-rigid is) oe Approvals: pe) =r = . pm | @ UL VWW-1, File No: 249362 i>) fe) Cc j ies: : : a} Technical properties: Applications: A-175K is a semi-rigid, flame retardant heat-shrinkable Polyvinylidene Fluoride (PVDF) tube for applications Property Test Method Typical Data requiring high temperature performance, outstanding abrasion and cut through resistance, or superior chemical and solvent resistant properties. Tensile strength ASTM D 2671 234.5 MPa Ultimate elongation ASTM D 2671 2150% . . . Ordering information: Ultimate elongation after aging 250C, 168 hrs. 2100% Standard colors: Heat shock UL224 (300C, 1 hrs) No cracks, flowing or dripping Black. Clear Cold bend UL224 ( -55C, 4 hrs) No cracking . Special colors: Flammability UL224 (VW-1) Pass N/A Volume resistance ASTM D 2671 21013Q .cm Packaging: Dielectric strength IEC60243 >30 kV/mm Standard packaging on spools and/or 1.22m. Other: Custom lengths are available, please contact our sales department for further information.sjoOnpolg ainjyesodwe; Yybipy ADR Flexible, Flame Retardant, High Performance Tubing Features: Crosslinked modified elastomeric polyolefin Superior abrasion resistance B Highly flame retardant High temperature resistance Technical properties: Excellent fluid resistance and flexibility Operating temp.: -65C to +150C Min. full recovery temp.: 175C @ Meets: SAE-AMS-DTL-23053/16 lH Voltage: 600V Property Test Method Typical Data Tensile strength ASTM D 2671 213 MPa Ultimate elongation ASTM D 2671 2250% Ultimate elongation after aging 150C, 168 hrs. 2200% Heat shock 200C, 4 hrs No cracks, flowing or dripping Secant modulus UL224 <50 MPa Flammability ASTM D 2671 Self-extinguish in 15 sec. Volume resistance ASTM D 2671 210 90 .cm Fluid resistance ASTM D 2671 (24hrs., Diesel 70C, Tensile strength hydraulic fluid 70C, lubricating oil 210 MPa Ultimate elongation 100C) 2200% Amphenol Specification As supplied (mm) After recovered(mm) Standard length Black 00 Ne | om_| en [tert | ncn | Mamita [ne | testo | A Dect 1 3.2/1.6 1/8 3.2 1.6 0.73 Oo 100 HST ADR 3.2/1.6 (00) ADR 3.2MM H/S TUBE 2:1 BK 2 4.8/2.4 | 3/16 4.8 2.4 0.80 [e} 50 HST ADR 4.8/2.4 (00) ADR 4.8MM H/S TUBE 2:1 BK 3 6.4/3/2 | 1/4 6.4 3.2 0.85 oO 50 HST ADR 6.4/3.2 (00) ADR 6.4MM H/S TUBE 2:1 BK 4 9.5/4.8 3/8 9.5 35 4.8 0.97 oO 50 HST ADR 9.5/4.8 (00) ADR 9.5MM H/S TUBE 2:1 BK 5 12.7/64 | 1/2 12.7 6.4 1.16 50 HST ADR 12.7/6.4 (00) ADR 12.7MM H/S TUBE 2:1 BK 6 19.1/9.5 | 3/4 19.1 9.5 1.37 50 HST ADR 19.1/9.5 (00) ADR 19.1MM H/S TUBE 2:1 BK Applications: Using a specially formulated polyolefin material the ADR can wisthstand high temperatures, is fluid resistant, long term heat resistant, and offers effective protection to cable terminations, splices, and joints used in military vehicles . Ordering information: Standard colors: Black Special colors: N/A Packaging: Standard packaging on spools. Special: 1m, 1.22m pieces are available on request. Other: Custom lengths are available, please contact our sales department for further information.ste) a) elev Ml avica ile (U0t- Mb o)l Features: A-200E Fluoroelastomeric Tubing W l Hot melt adhesive Crosslinked fluoroelastomer Superior abrasion resistance High temperature resistance Approvals: Available with various wall thickness M Operating temp.: -55C to +200C Min. full recovery temp.: 175C Excellent resistance to aggressive chemicals and solvents M Meets: SAE-AMS-DTL-23053/13 MH Voltage: 600V Technical properties: Property Test Method Typical Data Operating Temperature IEC 216 -55C~+200C Tensile strength ASTM D 2671 >8.5MPa Ultimate elongation ASTM D 2671 2>250% Ultimate elongation after heat aging ASTM D 2671 >200% Heat shock(300C/4hrs.) ASTM D 2671 No crack, no drip Low temperature flexibility(-55C/4hrs.) ASTM D 2671 No crack Flammability ASTM D 2671 Self-extinguishing in 15 sec. Volume resistance IEC60093 >10%0.cm Dielectric strength IEC60243 >7.9MPa Copper Corrosion UL 224 Pass Amphenol Specification As supplied (mm) After recovered(mm) Standard length Black 00 Ne [rom [nt nec [STS ese] Men [en | (mesa | Ares Psion 1 3.2/1.6 1/8 3.2 1.6 0.76 oO 100 HST A-200E 3.2/1.6 (00) A-200E 3.2MM H/S TUBE 2:1 BK 2 4.8/2.4 | 3/16 4.8 2.4 0.90 [e} 50 HST A-200E 4.8/2.4 (00) A-200E 4.8MM H/S TUBE 2:1 BK 3 6.4/3.2 1/4 6.4 35 3.2 0.90 Oo 50 HST A-200E 6.4/3.2 (00) A-200E 6.4MM H/S TUBE 2:1 BK 4 9.5/4.8 3/8 9.5 4.8 0.93 - 50 HST A-200E 9.5/4.8 (00) A-200E 9.5MM H/S TUBE 2:1 BK 5 12.7/64| 1/2 12.7 6.4 1.10 50 HST A-200E 12.7/6.4 (00) A-200E 12.7MM H/S TUBE 2:1 BK 6 19.1/9.5| 3/4 19.1 40 9.5 1.38 30 HST A-200E 19.1/9.5 (00) A-200E 19.1MM H/S TUBE 2:1 BK Applications: Made from modified fluoroelastomer (Viton), with superior impact, abrasion and cut through resistance, the A- 200E is suitable for many applications requiring high resistance to corrosive fluids, fuels, lubricants, acids and solvents at elevated temperatures. Ordering information: Standard colors: Black Special colors: N/A Packaging: Standard packaging on spools . Special: 1m, 1.22m pieces are available on request. Other: Custom lengths are available, please contact our sales department for further information.sjoOnpolg ainjyesodwe; Yybipy PN = Teflon PTFE Tubing Features: Modified polytetrafluoroethylene M Superior chemical and physical properties Very low friction coefficient Excellent electrical properties Technical properties: Operating temp.: -65C to +200C Min. full recovery temp.: 350C Shrink ratio: 1.5:1 M Meets: SAE-AMS-DTL-23053/12 BH Voltage: 600V Property Test Method Typical Data Tensile strength ASTM D 2671 217.3 MPa Ultimate elongation ASTM D 2671 2200% Density ASTM D 792 2.3 g/icm$ Low temperature flexibility ASTM D 2671(-65C, 4 hrs.) No cracking Flammability ASTM D 2671 Self extinguish Volume resistance ASTM D 2671 210 18Q .cm Dielectric strength IEC60243 234 kV/mm Copper corrosion UL 224 Pass Fluid resistance SAE-AMS-DTL-23053 Excellent Water absorption ASTM D 570 <0.1 Amphenol Specification As supplied (mm) After recovered(mm) Standard length Clear X Item ici dedi. F Tube Shape No mm oy Ecentricity | Insidediameter | Wall thickness Pe! (meters/roll) Amphenol P/N Description (max)(%) (max)(d) (min)(w) CUSTOMER 1 AWG 30T 0.86 0.34 0.21 Oo 1.22 HST ATFE 0.86/0.34 (X) ATFE 0.86MM TEFLON TUBE 2 AWG 28T 0.97 0.42 0.21 oO 1.22 HST ATFE 0.97/0.42 (X) ATFE 0.97MM TEFLON TUBE 3 AWG 26T 1.17 0.52 0.21 Oo 1.22 HST ATFE 1.17/0.52 (X) ATFE 1.17MM TEFLON TUBE 4 AWG 24T 1.27 0.6 0.23 oO 1.22 HST ATFE 1.27/0.60 (X) ATFE 1.27MM TEFLON TUBE 5 AWG 22T 1.40 0.76 0.23 Oo 1.22 HST ATFE 1.40/0.76 (X) ATFE 1.40MM TEFLON TUBE 6 AWG 20T 1.52 0.93 0.28 oO 1.22 HST ATFE 1.52/0.93 (X) ATFE 1.52MM TEFLON TUBE 7 AWG 18T 1.93 1.08 0.28 Oo 1.22 HST ATFE 1.93/1.08 (X) ATFE 1.93MM TEFLON TUBE 8 AWG 16T 2.36 1.38 0.28 oO 1.22 HST ATFE 2.36/1.38 (X) ATFE 2.36MM TEFLON TUBE 9 AWG 14T 3.05 1.67 0.28 Oo 1.22 HST ATFE 3.05/1.67 (X) ATFE 3.05MM TEFLON TUBE 10 AWG 12T 3.90 / 2.07 0.28 O 1.22 HST ATFE 3.90/2.07 (X) ATFE 3.90MM TEFLON TUBE 11 AWG 10T 4.90 2.57 0.28 Oo 1.22 HST ATFE 4.90/2.57 (X) ATFE 4.90MM TEFLON TUBE 12 AWG 8T 6.10 3.27 0.37 oO 1.22 HST ATFE 6.10/3.27 (X) ATFE 6.10MM TEFLON TUBE 13 AWG 6T 7.70 4.17 0.37 oO 1.22 HST ATFE 7.70/4.17 (X) ATFE 7.70MM TEFLON TUBE 14 AWG 4T 9.40 5.17 0.37 Oo 1.22 HST ATFE 9.40/5.17 (X) ATFE 9.40MM TEFLON TUBE 15 AWG 2T 11.00 6.67 0.37 oO 1.22 HST ATFE 11.0/6.67 (x) ATFE 11.0MM TEFLON TUBE 16 AWG 0T 11.95 8.17 0.37 Oo 1.22 HST ATFE 11.95/8.17 (X) ATFE 11.95MM TEFLON TUBE Applicati : pplications: Specially designed for applications in the automotive, military and aerospace markets. ATFE provides excellent temperature stability, chemical resistance, extreme electrical insulation, and is highly flame retardant. Ordering information: Standard colors: Clear Special colors: N/A Packaging: Standard packaging is 1m, 1.22m pieces. Other: Custom lengths are available, please contact our sales department for further information.sjoOnpolg ainjyesodwe; Yybipy AFSP Features: Fiber Optic Splice Protector UR, ix ee Amphenol i Crosslinked polyolefin B Low shrink temperature Pre-installed stainless steel or ceramic rod lm Accommodates single or ribbon fibers Technical properties: Operating temp.: -45C to +100C Wide range of sizes @ Min. full recovery temp.: 120C Property Test Method Typical Data Tensile strength ASTM D 2671 218 MPa Ultimate elongation ASTM D 2671 2700% Longitudinal change ASTM D 2671 0+5% Density ASTM D 792 0.94g/cm3 Dielectric strength IEC60243 220 kV/mm Dielectric constant IEC 250 $2.5 Specifications Clear X Item Length Fushion Tube Steel Rod Sleeve Diameter | Packing Amphenol P/N N Description co mm 1.D.(mm)| Length(mm) | 0.D. (mm) Length (mm) mm pcs/bag CUSTOMER 1 61 14 61 1.5 55 2.8 100 AFSP-61 AFSP-61 OPTICAL FIBER TUBE TR 2 45 14 45 1.5 40 2.8 100 AFSP-45 AFSP-45 OPTICAL FIBER TUBE TR 3 61 1.4 61 1.0 57 2.2 100 AFSP-3A-X (61T) AFSP-61T OPTICAL FIBER TUBE TR 4 45 14 45 1.0 41 2.2 100 AFSP-4A-X45(45T) AFSP-45T OPTICAL FIBER TUBE TR 5 40 1.4 40 1.0 36 2.2 100 AFSP-3A-X40(40T) AFSP-40T OPTICAL FIBER TUBE TR 6 35 1.4 35 1.0 31 2.2 100 AFSP-3A-X35(35T) AFSP-35T OPTICAL FIBER TUBE TR 7 30 1.4 30 1.0 27 2.2 100 AFSP-30T AFSP-30T OPTICAL FIBER TUBE TR 8 25 1.4 25 1.0 21 2.2 100 AFSP-25T AFSP-25T OPTICAL FIBER TUBE TR 9 40 0.35 40 0.5 40 1.15 100 AFSP-40M AFSP-40M OPTICAL FIBER TUBE TR 10 25 0.35 25 0.5 25 1.15 100 AFSP-25M AFSP-25M OPTICAL FIBER TUBE TR 11 18 0.35 18 0.5 18 1.15 100 AFSP-18M AFSP-18M OPTICAL FIBER TUBE TR 12 15 0.35 15 0.5 15 1.15 100 AFSP-15M AFSP-15M OPTICAL FIBER TUBE TR 13 10 0.35 10 0.5 10 1.15 100 AFSP-10M AFSP-10M OPTICAL FIBER TUBE TR as supplied A -A A - . J | | A J a Aono A Q---<a 4 ()oHeat Shrink Outer Tube eS a a 8 ye [Adhesive Inner Tube 50 a J a] | Steel Rod after recovery = = . ' Applications Consists of crosslinked polyolefin, hot fusion tubing, and a stainless steel reinforcement rod that ensures the optical transmission properties of fiber optics are protected and enhances the protection of fiber optic splices. Ordering information: Standard colors: Clear Special colors: Special colors are available on request. Please contact our sales department for further information. Packaging: Standard packaging: BaggedMedium Wall Tubing with Hot Melting Adhesive Amphenol Normal size |_AS supplied(mm) After recovered(mm) Standard length Black 00 vem _ Inside diameter Inside Se Wall wicks Tube Shape (meters/roll) emphencliin Description (Min) (Max) (Min) CUSTOMER vr sy 1 8.0/2.0 8 2 1.7 Oo 1.22 HST ARTM 8.0/2.0 (00) ARTM 8.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK % y e 2 12.0/3.0 12 3 1.8 oO 1.22 HST ARTM 12.0/3.0 (00) ARTM 12.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK a 3 16.0/5.0 16 5 1.8 oO 1.22 HST ARTM 16.0/5.0 (00) ARTM 16.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 4 22.0/6.0 22 6 2.0 oO 1.22 HST ARTM 22.0/6.0 (00) ARTM 22.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 5 33.0/8.0 33 8 2.3 oO 1.22 HST ARTM 33.0/8.0 (00) ARTM 33.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 6 40.0/12.0 40 12 2.3 oO 1.22 HST ARTM 40.0/12.0 (00) ARTM 40.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 7 55.0/16.0 55 16 2.3 oO 1.22 HST ARTM 55.0/16.0 (00) ARTM 55.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK / rn - 8 65.0/19.0 65 19 2.5 oO 1.22 HST ARTM 65.0/19.0 (00) ARTM 65.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK a Hot melt adhesive = 9 75.0/22.0 75 22 2.7 Oo 1.22 HST ARTM 75.0/22.0 (00) ARTM 75.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 10 85.0/25.0 85 25 2.8 oO 1.22 HST ARTM 85.0/25.0 (00) ARTM 85.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK b 11 95.0/25.0 95 25 2.8 oO 1.22 HST ARTM 95.0/25.0 (00) ARTM 95.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 12 115.0/34.0 115 34 3.4 oO 1.22 HST ARTM 115.0/34.0 (00) | ARTM 115.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 13 140.0/42.0 140 42 3.4 oO 1.22 HST ARTM 140.0/42.0 (00) | ARTM 140.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK Featu res: 14 160.0/50.0 160 50 3.4 1.22 HST ARTM 160.0/50.0 (00) | ARTM 160.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK Excellent mechanical performance Operating temp.: -55C to +110C Min. full recovery temp.: 120C Medium wall tubing coated adhesive Co-extrusion technology lM Good sealing & shrinking properties = a = 3 Qo a 2) 5 < 5 = ey 5 To} UV resistant Technical properties: Property Test Method Typical Data Property of jacket Tensile strength ASTM D 2671 214 MPa Ultimate elongation ASTM D 2671 2400% Heat aging i i . Tensile strength ASTM D 2671(150C, 168 hrs.) 212 MPa Applications: i 1 0, Ultimate elongation 2300% Designed to seal and protect electrical splices, cable terminations, and joints where electrical insulation and Density ASTM D 792 1.05g/cm3 water ingress protection are required. Has a 3:1 shrink ratio which allows the tubing to fit over irregular shaped and large connectors. Longitudinal shrinkage UL 224 0~-11% Dielectric strength IEC 60243 218 kV/mm . . . Volume resistance IEC 93 210130.cm Ordering information: Copper stability ASTM D 2671 Pass Standard colors: Water absorption ISO 62 <0.15% Black Property of adhesive . pery Special colors: Water absorption ISO 62 <0.2% N/A Softening point ASTM E28 105+5C Packaging: Peel strength (PE) DIN 30672 4N/cm . . , Standard packaging of 1m, 1.2m, 1.5m pieces are available on request. Resistance to fungus and decay ISO 846 Pass Other: Custom lengths are available, please contact our sales department for further information.= a = 3 Qo a 2) 5 < 5 = ey 5 To} AFRAZ Fiame Retardant Medium Wall Tubing with Hot Melting Adhesive Y/ Features: [ X + Hot melt adhes|lve Medium wall tubing with adhesive M Flame retardant lM Good sealing & electrical properties Excellent mechanical performance UV and weather resistant M Operating temp.: -55C to +110C Min. full recovery temp.: 120C BH Voltage: / Amphenol Technical properties: Property Test Method Typical Data Property of jacket Tensile strength ASTM D 2671 214 MPa Ultimate elongation ASTM D 2671 2400% Heat aging Tensile strength ASTM D 2671(150C, 168 hrs.) 212 MPa Ultimate elongation 2300% Density ASTM D 792 1.25g/cms Longitudinal shrinkage UL 224 0~-12% Dielectric strength IEC60243 218 kV/mm Volume resistance IEC 93 210'3Q.cm Flammability Self extinguish in 60 sec. Property of adhesive Water absorption ISO 62 <0.2% Softening point ASTM E28 85+5C Peel strength (PE) DIN 30672 4N/cm Resistance to fungus and decay ISO 846 Pass Normal size |_AS supplied(mm) After recovered(mm) Standard length Black 00 vem _ Inside diameter Inside Se Wall wicks Tube Shape (meters/roll) amphencliiN Description (Min) (Max) (Min) CUSTOMER 1 22/6 22 6 24 Oo 1.22 HST AFRA2 22.0/6.0 (00) | AFRA2 22.0MM FR MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 2 28/6 28 6 2.5 oO 1.22 HST AFRA2 28.0/6.0 (00) | AFRA2 28.0MM FR MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 3 33/8 33 8 2.5 oO 1.22 HST AFRA2 33.0/8.0 (00) AFRA2 33.0MM FR MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 4 40/12 40 12 2.5 oO 1.22 HST AFRA2 40.0/12.0 (00) | AFRA2 40.0MM FR MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 5 55/16 55 16 2.7 oO 1.22 HST AFRA2 55.0/16.0 (00) | AFRA2 55.0MM FR MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 6 65/19 65 19 2.8 oO 1.22 HST AFRA2 65.0/19.0 (00) | AFRA2 65.0MM FR MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 7 75/22 75 22 3.0 oO 1.22 HST AFRA2 75.0/22.0 (00) | AFRA2 75.0MM FR MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 8 95/25 95 25 3.0 oO 1.22 HST AFRA2 95.0/25.0 (00) | AFRA2 95.0MM FR MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 9 115/34 115 34 3.2 Oo 1.22 HST AFRA2 115.0/34.0 (00) | AFRA2 115.0MM FR MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 10 140/42 140 42 3.3 oO 1.22 HST AFRA2 140.0/42.0 (00) | AFRA2 140.0MM FR MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 11 160/50 160 50 3.3 oO 1.22 HST AFRA2 160.0/50.0 (00) | AFRA2 160.0MM FR MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 12 180/58 180 58 3.3 oO 1.22 HST AFRA2 180.0/58.0 (00) | AFRA2 180.0MM FR MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 13 200/65 200 65 3.3 oO 1.22 HST AFRA2 200.0/65.0 (00) | AFRA2 200.0MM FR MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK Applications: Suitable for protecting electrical splices, cable terminations, and joints where flame retardation, electrical insulation and water ingress protection are required. Ordering information: Standard colors: Black Special colors: N/A Packaging: Standard packaging of 1m, 1.2m, 1.5m pieces are available on request. Other: Custom lengths are available, please contact our sales department for further information.= a = 3 Qo a 2) 5 < 5 = ey 5 To} AFRA3 Flame Retardant Heavy Wall Tubing with Hot Melting Adhesive Features: / Yr P Hot melt adhes|ve Heavy wall tubing with adhesive Flame retardant Good sealing & electrical properties Excellent mechanical performance Technical properties: UV and weather resistant Operating temp.: -55C to +110C Min. full recovery temp.: 120C @ Voltage: / Property Test Method Typical Data Property of jacket Tensile strength ASTM D 2671 214 MPa Ultimate elongation ASTM D 2671 2400% Heat aging Tensile strength ASTM D 2671(150C, 168 hrs.) 212 MPa Ultimate elongation 2300% Density ASTM D 792 1.25g/ems Longitudinal shrinkage UL 224 0~-10% Dielectric strength IEC 60243 218 kV/mm Volume resistance IEC 93 21013Q.cm Flammability Self extinguish in 60 sec. Property of adhesive Water absorption ISO 62 <0.2% Softening point ASTM E28 85+5C Peel strength (PE) DIN 30672 4N/cm Resistance to fungus and decay ISO 846 Pass Amphenol Normal size |_AS supplied(mm) After recovered(mm) Standard length Black 00 Item D d tu Tube Shape No _ Inside diameter Inside diameter | Wall thickness a (meters/roll) Amphenol Description (Min) (Max) (Min) CUSTOMER 1 22/6 22 6 2.7 Oo 1.22 HST AFRA3 22.0/6.0 (00) AFRA3 22.0MM FR HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 2 28/6 28 6 2.9 oO 1.22 HST AFRA3 28.0/6.0 (00) | AFRA3 28.0MM FR MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 3 33/8 33 8 3.2 oO 1.22 HST AFRA3 33.0/8.0 (00) AFRA3 33.0MM FR HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 4 40/12 40 12 4.0 oO 1.22 HST AFRA3 40.0/12.0 (00) AFRA3 40.0MM FR HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 5 55/16 55 16 4.0 oO 1.22 HST AFRA3 55.0/16.0 (00) AFRA3 55.0MM FR HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 6 65/19 65 19 4.0 oO 1.22 HST AFRA3 65.0/19.0 (00) AFRA3 65.0MM FR HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 7 75/22 75 22 4.0 oO 1.22 HST AFRA3 75.0/22.0 (00) AFRA3 75.0MM FR HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 8 95/25 95 25 4.2 oO 1.22 HST AFRA3 95.0/25.0 (00) AFRA3 95.0MM FR HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 9 115/34 115 34 4.2 Oo 1.22 HST AFRA3 115.0/34.0 (00) | AFRA3 115.0MM FR HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 10 130/36 130 36 4.2 oO 1.22 HST AFRA3 130.0/36.0 (00) | AFRA3 140.0MM FR MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK Applicati : pplications: Suitable for protecting electrical splices, cable terminations, and joints where flame retardation, electrical insulation and water ingress protection are required. Ordering information: Standard colors: Black Special colors: N/A Packaging: Standard packaging of 1m, 1.2m, 1.5m pieces are available on request. Other: Custom lengths are available, please contact our sales department for further information.= a = 3 Qo a 2) 5 < 5 = ey 5 To} Nai Features: Heavy Wall Tubing with Hot Melting Adhesive Xz 7 [ Hot melt adhesive 3 i Heavy wall tubing coated adhesive Co-extrusion technology i Good sealing & shrinking properties M UV resistant Excellent mechanical performance Operating temp.: -55C to +110C Min. full recovery temp.: 120C B Voltage: / Amphenol Technical properties: Property Test Method Typical Data Property of jacket Tensile strength ASTM D 2671 214 MPa Ultimate elongation ASTM D 2671 2400% Heat aging Tensile strength ASTM D 2671(150C, 168 hrs.) 212 MPa Ultimate elongation 2300% Density ASTM D 792 1.05g/cm$ Longitudinal shrinkage UL 224 0~-10% Dielectric strength IEC60243 218 kV/mm Volume resistance IEC 93 210130.cm Copper stability ASTM D 2671 Pass Water absorption ISO 62 <0.15% Property of adhesive Water absorption ISO 62 <0.2% Softening point ASTM E28 105+5C Peel strength (PE) DIN 30672 4N/cm Resistance to fungus and decay ISO 846 Pass Normal size |_AS supplied(mm) After recovered(mm) Standard length Black 00 vem _ Inside diameter Inside Se Wall wicks Tube Shape (meters/roll) amphencliiN Description (Min) (Max) (Min) CUSTOMER 1 9/3 9.0 3.0 1.9 oO 1.22 HST ARTH 9.0/3.0 (00) ARTH 9.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 2 15/4 15.0 4.0 2.3 oO 1.22 HST ARTH 15.0/4.0 (00) ARTH 15.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 3 24/6 24.0 6.0 2.6 oO 1.22 HST ARTH 24.0/6.0 (00) ARTH 24.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 4 33/8 33.0 8.0 3.2 oO 1.22 HST ARTH 33.0/8.0 (00) ARTH 33.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 5 43/12 43.0 12.0 4.0 oO 1.22 HST ARTH 43.0/12.0 (00) ARTH 43.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 6 55/16 55.0 16.0 4.0 oO 1.22 HST ARTH 56.0/16.0 (00) ARTH 55.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 7 75/22 75.0 22.0 4.0 oO 1.22 HST ARTH 75.0/22.0 (00) ARTH 75.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 8 85/25 85.0 25.0 4.0 oO 1.22 HST ARTH 85.0/25.0 (00) ARTH 85.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 9 95/25 95.0 25.0 4.0 Oo 1.22 HST ARTH 95.0/25.0 (00) ARTH 95.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 10 105/25 105.0 25.0 4.0 oO 1.22 HST ARTH 105.0/25.0 (00) ARTH 105.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 11 115/34 115.0 34.0 4.0 oO 1.22 HST ARTH 115.0/34.0 (00) ARTH 115.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 12 130/36 130.0 36.0 4.0 oO 1.22 HST ARTH 130.0/36.0 (00) ARTH 130.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK Applications: Designed to seal and protect electrical splices, cable terminations, and joints where electrical insulation and water ingress protection are required. Has a 3:1 shrink ratio which allows the tubing to fit over irregular shaped and large connectors. Ordering information: Standard colors: Black Special colors: N/A Packaging: Standard packaging on spools. Special: 1m, 1.2m, 1.5m pieces are available on request. Other: Custom lengths are available, please contact our sales department for further information.= a = 3 Qo a 2) 5 < 5 = ey 5 To} Heavy Wall Tubing with Hot Melting Adhesive Features: / P Hot melt adhes|ve Crosslinked polyolefin tubing with adhesive M Extra high shrink ratio Extra thick wall Perfect sealing property Superior abrasion and impact resistance UV and weather resistant M Operating temp.: -55C to +110C Min. full recovery temp.: 120C M Shrink ratio: 6:1 Voltage: / Amphenol Technical properties: Property Test Method Typical Data Property of jacket Tensile strength ASTM D 2671 214 MPa Ultimate elongation ASTM D 2671 2400% Heat aging Tensile strength ASTM D 2671(150C, 168 hrs.) 212 MPa Ultimate elongation 2300% Density ASTM D 792 1.05g/cm$ Longitudinal shrinkage UL 224 0~-12% Dielectric strength IEC 60243 218 kV/mm Volume resistance IEC 93 210'30.cm Copper stability ASTM D 2671 Pass Water absorption ISO 62 <0.15% Property of adhesive Water absorption ISO 62 <0.2% Softening point ASTM E28 85+5C Peel strength (PE) DIN 30672 4 N/cm Resistance to fungus and decay ISO 846 Pass Normal size |_AS supplied(mm) After recovered(mm) Standard length Black 00 Item D d tu Tube Shape No _ Inside diameter Inside diameter | Wall thickness a (meters/roll) Amphenol Description (Min) (Max) (Min) CUSTOMER 1 19.0/3.2 19.0 3.2 3.2 oO 1.22 HST ARA-6X 19.0/3.2 (00) ARA-6X 19.0MM HEAVY WALL TUBE WITH ADHESIVE 6:1 BK 2 33.0/5.5 33.0 5.5 3.4 oO 1.22 HST ARA-6X 33.0/5.5 (00) ARA-6X 33.0MM HEAVY WALL TUBE WITH ADHESIVE 6:1 BK 3 444/74 44.4 74 3.6 oO 1.22 HST ARA-6X 44.4/7.4 (00) ARA-6X 44.4MM HEAVY WALL TUBE WITH ADHESIVE 6:1 BK 4 50.8/8.3 50.8 8.3 4.7 oO 1.22 HST ARA-6X 50.0/8.3 (00) ARA-6X 50.0MM HEAVY WALL TUBE WITH ADHESIVE 6:1 BK 5 69.8/11.7 69.8 11.7 4.7 oO 1.22 HST ARA-6X 69.8/11.7 (00) ARA-6X 68.8MM HEAVY WALL TUBE WITH ADHESIVE 6:1 BK 6 88.9/17.1 88.9 17.1 4.7 oO 1.22 HST ARA-6X 88.9/17.1 (00) ARA-6X 88.0MM HEAVY WALL TUBE WITH ADHESIVE 6:1 BK 7 119.4/22.9 119.4 22.9 4.7 oO 1.22 HST ARA-6X 119.4/22.9 (00) | ARA-6X 118.0MM HEAVY WALL TUBE WITH ADHESIVE 6:1 BK 8 235.0/40.0 235.0 40.0 47 oO 1.22 HST ARA-6X 233.0/44.0 (00) ARA-6X 233.0MM HEAVY WALL TUBE WITH ADHESIVE 6:1 BK Applications: . Ideal for applications with extremely different diameter cable joints and components. Using a high shrink ratio provides a close fit to a wide variety of irregular profile joints and figures. Ordering information: Standard colors: Black Special colors: N/A Packaging: Standard packaging of 1m, 1.2m, 1.5m pieces are available on request. Other: Custom lengths are available, please contact our sales department for further information.Medium Wall Tubing with Black Sealant Mastic Coated Amphenol Normal size |_As supplied(mm) After recovered(mm) Standard length Black 00 D d t ie maT Inside diameter | Inside diameter | Wall thickness Tube Shape (meters/roll) emphencliin Description roy (Min) (Max) (Min) CUSTOMER Y h: 1 33/8 33 8 2.6 O 1.22 HST ARS 33.0/8.0 (00) ARS 33.0MM MEDIUM WALL TUBE WITH SEALANT BK Ye 2 40/12 40 12 2.6 oO 1.22 HST ARS 40.0/12.0 (00) ARS 40.0MM MEDIUM WALL TUBE WITH SEALANT BK 3 55/16 55 16 2.7 oO 1.22 HST ARS 55.0/16.0 (00) ARS 55.0MM MEDIUM WALL TUBE WITH SEALANT BK 4 75/22 75 22 3.0 Oo 1.22 HST ARS 75.0/22.0 (00) ARS 65.0MM MEDIUM WALL TUBE WITH SEALANT BK 5 95/25 95 25 3.3 oO 1.22 HST ARS 95.0/25.0 (00) ARS 95.0MM MEDIUM WALL TUBE WITH SEALANT BK 6 115/34 115 34 3.3 oO 1.22 HST ARS 115.0/34.0 (00) ARS 115.0MM MEDIUM WALL TUBE WITH SEALANT BK 7 140/42 140 42 3.3 oO 1.22 HST ARS 140.0/42.0 (00) ARS 140.0MM MEDIUM WALL TUBE WITH SEALANT BK 8 160/50 160 50 3.3 oO 1.22 HST ARS 160.0/50.0 (00) ARS 160.0MM MEDIUM WALL TUBE WITH SEALANT BK / zz 9 180/58 180 58 3.3 oO 1.22 HST ARS 180.0/58.0 (00) ARS 180.0MM MEDIUM WALL TUBE WITH SEALANT BK A Hot melt adhesive Black 10 200/65 200 65 3.3 Oo 1.22 HST ARS 200.0/65.0 (00) ARS 205.0MM MEDIUM WALL TUBE WITH SEALANT BK eA 11 235/65 235 65 3.7 Oo 1.22 HST ARS 235.0/65.0 (00) ARS 235.0MM MEDIUM WALL TUBE WITH SEALANT BK 12 265/75 265 75 3.8 oO 1.22 HST ARS 265.0/75.0 (00) ARS 265.0MM MEDIUM WALL TUBE WITH SEALANT BK 13 300/85 300 85 3.8 oO 1.22 HST ARS 300.0/85.0 (00) ARS 300.0MM MEDIUM WALL TUBE WITH SEALANT BK Featu res . 14 350/100 350 100 4.3 oO 1.22 HST ARS 350.0/100.0 (00) ARS 350.0MM MEDIUM WALL TUBE WITH SEALANT BK Medium wall crosslinked polyolefin tubing M UV resistant = Black sealant mastic coating M Operating temp.: -35C to +110C oS Excellent corrosion protection properties Min. full recovery temp.: 120C = Excellent bonding to metal and wood @ Voltage: / = i) 5 = Technical properties: pe) | Property Test Method Typical Data = Property of jacket oO | Tensile strength ASTM D 2671 214 MPa co Ultimate elongation ASTM D 2671 2400% Heat aging A li ; . ; . ications: Tensile strength ASTM D 2671(150C, 168 hrs.) 212 MPa PP ] j 0 Ultimate elongation 2300% ARS is a mastic lined heat shrinkable tube, designed specially for protecting metal pipe joints, soil nails, and other Density ASTM D 792 4.05g/cm? connectors requiring environmental sealing. Longitudinal shrinkage UL 224 0~-12% Dielectric strength IEC60243 218 kV/mm Ordering information: Volume resistance IEC 93 21013Q.cm Standard colors: Flammability _ Self extinguish in 60 sec. Black Property of adhesive , Special colors: Water absorption ISO 62 <0.2% WA Softening point ASTM E28 8545C Peel strength (PE) DIN 30672 4 Nicm Packaging: Resistance to fungus and decay ISO 846 Pass Standard packaging of 1m, 1.2m, 1.5m pieces are available on request. Other: Custom lengths are available, please contact our sales department for further information.AAT Amphenol Anti Tracking Insulation Tubing Normal size |_As supplied(mm) After recovered(mm) Standard length Red 02 ie maT Inside Inside Se Wall nica Tube Shape (meters/roll) emphencliin Description roy (Min) (Max) (Min) CUSTOMER y Y v 1 19/6 19 6 2.5 - 30 HST AAT 19.0/6.0 (02) AAT 19MM ANTI TRACKING INSULATION TUBE RED seat 2 30/10 30 10 2.9 - 30 HST AAT 30.0/10.0 (02) AAT 30MM ANTI TRACKING INSULATION TUBE RED 3 35/12 35 12 2.9 30 HST AAT 35.0/12.0 (02) AAT 35MM ANTI TRACKING INSULATION TUBE RED 4 40/16 40 16 2.9 30 HST AAT 40.0/16.0 (02) AAT 40MM ANTI TRACKING INSULATION TUBE RED 5 45/18 45 18 2.9 30 HST AAT 45.0/18.0 (02) AAT 45MM ANTI TRACKING INSULATION TUBE RED 6 54/24 54 24 2.9 30 HST AAT 54.0/24.0 (02) AAT 54MM ANTI TRACKING INSULATION TUBE RED 7 60/29 60 29 2.9 30 HST AAT 60.0/29.0 (02) AAT 60MM ANTI TRACKING INSULATION TUBE RED 8 76/38 76 38 3.0 30 HST AAT 76.0/38.0 (02) AAT 76MM ANTI TRACKING INSULATION TUBE RED a 9 100/49 100 49 3.0 30 HST AAT 100.0/49.0 (02) AAT 100MM ANTI TRACKING INSULATION TUBE RED Features: = Anti-tracking tubing UV and weather resistant 40) Heavy wall Excellent creeping resistance e. @ Semi flexible M@ Up to 36kV ro Excellent electrical properties Min. full recovery temp.: 110C 3 Voltage Rating: Up to 36kV o = Co] i>) = = oa . . = Technical properties: Qo Property Test Method Typical Data 0! OD Tensile strength ASTM D 2671 211 MPa 1) Ultimate elongation ASTM D 2671 2350% Longitudinal shrinkage UL 224 0~-10% Applications: Heat aging Used to provide insulation protection for cable terminals, load-break switches, power circuit breakers, etc. Tensile strength ASTM D 2671/120C, 168 hrs. >10 MPa Ultimate elongation >250% Dielectric strength IEC 60243 >15kV/mm Ordering information: Tracking resistance ASTM D 2303/3.75kV, 1hr. Pass Standard colors: Dielectric constant IEC 250 <3.0 Red Volume resistance ASTM D 2671 21013Q.cm Special colors: Flammability (Oxygen Index) ISO 4589 >25 N/A Copper corrosion ASTM D 2671 No corrosion Packaging: Cold bend ASTM D 2671/-40C, 4hrs. No cracking Standard packaging on spools and/or piece. Water absorption ISO 62 <0.15% Special: 1m, 1.2m, 1.5m pieces are available on request. Other: Custom lengths are available, please contact our sales department for further information.Amphenol AATA Anti Tracking Insulation Tubing Normal size |_As supplied(mm) After recovered(mm) Standard length Red 02 ie maT Inside Inside Se Wall nica Tube Shape (meters/roll) emphencliin Description roy (Min) (Max) (Min) CUSTOMER y Y R7 1 35/12 35 12 2.9 Oo 1.22 HST AATA 35.0/12.0 (02) AATA 35MM ANTI TRACKING INSULATION TUBE RED seat 2 40/12 40 12 2.9 oO 1.22 HST AATA 40.0/12.0 (02) AATA 40MM ANTI TRACKING INSULATION TUBE RED 3 43/14 43 14 2.9 oO 1.22 HST AATA 43.0/14.0 (02) AATA 43MM ANTI TRACKING INSULATION TUBE RED 4 49/16 49 16 2.9 oO 1.22 HST AATA 49.0/16.0 (02) AATA 49MM ANTI TRACKING INSULATION TUBE RED 5 55/18 55 18 2.9 oO 1.22 HST AATA 55.0/18.0 (02) AATA 55MM ANTI TRACKING INSULATION TUBE RED 6 65/21 65 21 3.2 Oo 1.22 HST AATA 65.0/21.0 (02) AATA 65MM ANTI TRACKING INSULATION TUBE RED 7 75/25 75 25 3.4 oO 1.22 HST AATA 75.0/25.0 (02) AATA 75MM ANTI TRACKING INSULATION TUBE RED vr 8 130/50 130 50 3.9 oO 1.22 HST AATA 130.0/50.0 (02) AATA 130MM ANTI TRACKING INSULATION TUBE RED } ~ A Hot melt adhesive > MS. Features: = Anti-tracking tubing UV and weather resistant 40) Heavy wall Excellent creeping resistance e. @ Semi flexible M@ Up to 36kV ro Excellent electrical properties Min. full recovery temp.: 110C 3 Voltage Rating: Up to 36kV o = Co] i>) = = oa . . = Technical properties: Qo Property Test Method Typical Data 0! OD Tensile strength ASTM D 2671 211 MPa 1) Ultimate elongation ASTM D 2671 2350% Longitudinal shrinkage UL 224 0~-10% Applications: Heat aging Used to provide insulation protection for cable terminals, load-break switches, power circuit breakers, etc. Tensile strength ASTM D 2671/120C, 168 hrs. >10 MPa Ultimate elongation >250% Dielectric strength IEC 60243 >15kV/mm Ordering information: Tracking resistance ASTM D 2303/3.75kV, 1hr. Pass Standard colors: Dielectric constant IEC 250 <3.0 Red Volume resistance ASTM D 2671 21013Q.cm Special colors: Flammability (Oxygen Index) ISO 4589 >25 N/A Copper corrosion ASTM D 2671 No corrosion Packaging: Cold bend ASTM D 2671/-40C, 4hrs. No cracking Standard packaging on spools and/or piece. Water absorption ISO 62 <0.15% Special: 1m, 1.2m, 1.5m pieces are available on request. Other: Custom lengths are available, please contact our sales department for further information.= @o < = = a =r (a @O = = J =) io} a i) SG i) ABTM Medium/Heavy Wall Halogen Free Busbar Insulation Tubing Features: jp Medium/Heavy wall flexible busbar tubing Modified polyolefin Tracking resistance Excellent electrical properties Good shrinking performance UV and weather resistant Halogen free M@ Up to 36kV Min. full recovery temp.: 120C Technical properties: Property Test Method Typical Data Tensile strength ASTM D 2671 212 MPa Ultimate elongation ASTM D 2671 2500% Longitudinal shrinkage ASTM D 2671 0~-12% Heat aging Tensile strength ASTM D 2671/120C, 168 hrs. >10 MPa Ultimate elongation >200% Dielectric strength IEC 60243 219kV/mm Dielectric constant IEC 250 $3.5 Volume resistance ASTM D 2671 210140.cm Flammability (Oxygen Index) ISO 4589 225 Copper corrosion ASTM D 2671 No corrosion Cold bend ASTM D 2671/-40C, 4hrs. No cracking Water absorption ISO 62 <0.5% Amphenol Normal size |_As supplied(mm) After recovered(mm) Standard length Red 02 vem _ Inside diameter Inside ae Wall wicks Tube Shape (meters/roll) emphenciiiN Description (Min) (Max) (Min) CUSTOMER 1 15/6 15 6 2.0 30 HST ABTM 15.0/6.0 (02) ABTM 15MM MEDIUM BUSBAR INSULATION TUBE RED 2 30/12 30 12 2.0 30 HST ABTM 30.0/12.0 (02) ABTM 30MM MEDIUM BUSBAR INSULATION TUBE RED 3 40/16 40 16 2.3 30 HST ABTM 40.0/16.0 (02) ABTM 40MM MEDIUM BUSBAR INSULATION TUBE RED 4 50/20 50 20 2.5 30 HST ABTM 50.0/20.0 (02) ABTM 50MM MEDIUM BUSBAR INSULATION TUBE RED 5 65/25 65 25 2.5 15 HST ABTM 65.0/25.0 (02) ABTM 65MM MEDIUM BUSBAR INSULATION TUBE RED 6 75/30 75 30 2.6 15 HST ABTM 75.0/30.0 (02) ABTM 75MM MEDIUM BUSBAR INSULATION TUBE RED 7 100/40 100 40 2.8 15 HST ABTM 100.0/40.0 (02) ABTM 100MM MEDIUM BUSBAR INSULATION TUBE RED 8 120/50 120 50 2.8 - 15 HST ABTM 120.0/50.0 (02) ABTM 120MM MEDIUM BUSBAR INSULATION TUBE RED 9 150/60 150 60 3.3 Oo 1.22 HST ABTM 150.0/60.0 (02) ABTM 150MM MEDIUM BUSBAR INSULATION TUBE RED 10 180/60 180 60 3.3 oO 1.22 HST ABTM 180.0/60.0 (02) ABTM 180MM MEDIUM BUSBAR INSULATION TUBE RED 11 205/75 205 75 3.8 oO 1.22 HST ABTM 205.0/75.0 (02) ABTM 205MM MEDIUM BUSBAR INSULATION TUBE RED 12 235/75 235 75 3.8 oO 1.22 HST ABTM 235.0/75.0 (02) ABTM 235MM MEDIUM BUSBAR INSULATION TUBE RED Applications: ABTM provides high resistance to tracking and arcing and enhances the insulation properties of a busbar in a switch and substation. Suitable for applications in insulating medium voltage busbars up to 36kV. Ordering information: Standard colors: Brown Red Special colors: N/A Packaging: Standard packaging on spools. Special: 1m pieces are available on request. Other: Custom lengths are available, please contact our sales department for further information.ABTH Medium/Heavy Wall Halogen Free Busbar Insulation Tubing Amphenol Normal size |_As supplied(mm) After recovered(mm) Standard length Red 02 ie maT Inside Inside ae Wall nica Tube Shape (meters/roll) emphenciiiN Description & Ay (Min) (Max) (Min) CUSTOMER y Ww v 1 25/10 25 10 3.9 Oo 1.22 HST ABTH 25.0/10.0 (02) ABTH 25MM HEAVY BUSBAR INSULATION TUBE RED seat 2 40/16 40 16 4.0 oO 1.22 HST ABTH 40.0/16.0 (02) ABTH 40MM HEAVY BUSBAR INSULATION TUBE RED 3 65/16 65 16 4.0 oO 1.22 HST ABTH 65.0/16.0 (02) ABTH 65MM HEAVY BUSBAR INSULATION TUBE RED 4 75/25 75 25 4.0 oO 1.22 HST ABTH 75.0/25.0 (02) ABTH 75MM HEAVY BUSBAR INSULATION TUBE RED 5 95/30 95 30 4.0 oO 1.22 HST ABTH 95.0/30.0 (02) ABTH 95MM HEAVY BUSBAR INSULATION TUBE RED 6 120/40 120 40 4.1 Oo 1.22 HST ABTH 120.0/40.0 (02) ABTH 120MM HEAVY BUSBAR INSULATION TUBE RED 7 180/58 180 58 4.1 oO 1.22 HST ABTH 180.0/58.0 (02) ABTH 180MM HEAVY BUSBAR INSULATION TUBE RED qo Features: = M Medium/Heavy wall flexible busbar tubing UV and weather resistant rs) Modified polyolefin M Halogen free fo Tracking resistance M@ Up to 36kV = Excellent electrical properties Min. full recovery temp.: 120C =| lM Good shrinking performance Voltage Rating:Up to 36kV o mn i) = = : : o. Technical properties: =) fo] Qo Property Test Method Typical Data Se ie) Tensile strength ASTM D 2671 212 MPa xe) 40) Ultimate elongation ASTM D 2671 2500% . . Applications: Longitudinal shrinkage ASTM D 2671 0~-12% ABTH provides high resistance to tracking and arcing and enhances the insulation properties of a busbar in a switch Heat aging and substation. Suitable for applications in insulating medium voltage busbars up to 36kV. Tensile strength ASTM D 2671/120C, 168 hrs. >10 MPa Ultimate elongation >200% Ordering information: Dielectric strength IEC 60243 219kV/mm " " Standard colors: Dielectric constant IEC 250 $3.5 Brown Red Volume resistance ASTM D 2671 210'40.cm . Special colors: Flammability (Oxygen Index) ISO 4589 225 N/A Copper corrosion ASTM D 2671 No corrosion oo Packaging: Cold bend ASTM D 2671/-40C, 4hrs. No cracking Standard packaging on spools. Special: 1m pieces are available on request. Water absorption ISO 62 <0.5% Other: Custom lengths are available, please contact our sales department for further informationBusbar Insulation Tape Amphenol Specifications Red 02 Item Size es As supplied (mm) | After recovered (mm) Packing Amphenol P/N 7 rer rs% No mm inch PS D* (Min.) w*(Min.) M/Reel CUSTOMER eam y ROHS 1 ABIT-1 / - 25 11 5m or 10m HST ABIT-1 (02) ABIT 25MM BUSBAR INSULATION TAPE RED SP 2 ABIT-2 / - 50 11 5m or 10m HST ABIT-2 (02) ABIT 50MM BUSBAR INSULATION TAPE RED 3 ABIT-4 / . 100 11 5m or 10m HST ABIT-4 (02) ABIT 100MM BUSBAR INSULATION TAPE RED Features: = Busbar Insulation tape UV and weather resistant oO Crosslinked polyolefin M Operating temp.: -55C to +105C (ok li Good tracking resistance M Up to 36kV Excellent electrical insulation Min. full recovery temp.: 100C = =; Voltage Rating: Up to 36kV o =r i) = i a a Technical properties: x} Property Test Method Typical Data xe) @ Tensile strength ASTM D 2671 211.5 MPa Ultimate elongation ASTM D 2671 2550% Heat aging Applications: Tensile strength ASTM D 2671/120C, 168 hrs. >10 MPa Ultimate elongation >450% Widely used to protect irregular shaped busbars or connectors where tube products cannot be applied. Dielectric strength IEC 60243 220kV/mm Orderin g information: Dielectric constant IEC 250 $3.5 Standard colors: Volume resistance ASTM D 2671 210130.cm Red Flammability ASTM D 2671 Self-extinguish in 60 sec. Special colors: N/A Copper corrosion ASTM D 2671 No corrosion Water absorption ISO 62 <0.5% Packaging: Standard packaging: Boxed= @o < = = a =r (a @O = = J =) io} a i) SG i) ASCT Semi-conductive Tubing a Features: M Crosslinked polyolefin Min. shrink temp.: 100C Excellent electrical & mechanical properties Operating temp.: -45C to +105C UV and weather resistant Min. full recovery temp.: 120C M Up to 36kV Technical properties: Property Test Method Typical Data Tensile strength ASTM D 2671 212 MPa Ultimate elongation ASTM D 2671 2300% Ultimate elongation after aging ASTM D 2671/150C, 168 hrs. 2200% Volume resistance GB/T <1040 .cm Water absorption ISO 62 <0.5% Longitudinal shrinkage UL 224 0+5% Amphenol Normal size |_As supplied(mm) After recovered(mm) Standard length Black 00 Item D d tu Tube Shape No _ Inside diameter | Inside diameter | Wall thickness a (meters/roll) amebencili Description (Min) (Max) (Min) CUSTOMER 1 33/8 33 8 2.4 Oo 1.22 HST ASCT 33.0/8.0 (00) ASCT 33MM SEMI-CONDUCTIVE TUBE BK 2 40/12 40 12 2.5 oO 1.22 HST ASCT 40.0/12.0 (00) ASCT 40MM SEMI-CONDUCTIVE TUBE BK 3 55/16 55 16 2.8 oO 1.22 HST ASCT 55.0/16.0 (00) ASCT 55MM SEMI-CONDUCTIVE TUBE BK 4 75/22 75 22 3.0 oO 1.22 HST ASCT 75.0/22.0 (00) ASCT 75MM SEMI-CONDUCTIVE TUBE BK 5 95/25 95 25 3.1 oO 1.22 HST ASCT 95.0/25.0 (00) ASCT 95MM SEMI-CONDUCTIVE TUBE BK 6 120/34 120 34 3.2 oO 1.22 HST ASCT 120.0/34.0 (00) ASCT 120MM SEMI-CONDUCTIVE TUBE BK Applicati : pplications: Specially developed chemical formulation provides an effective insulation screen on high voltage cable connectors. Ordering information: Standard colors: Black Special colors: N/A Packaging: Standard packaging on spools. Other: Custom lengths are available, please contact our sales department for further information= @o < = = a =r (a @O = = J =) io} a i) SG i) ASC-100 Stress Control Tubing yy Features: Modified polyolefin Up to 24kV M Stress control tubing M Flexible, excellent shrinking properties Technical properties: Min. shrink temp.: 100C Min. full recovery temp.: 130C Property Test Method Typical Data Tensile strength ASTM D 2671 210 MPa Ultimate elongation ASTM D 2671 2300% Longitudinal shrinkage UL 224 0~-10% Heat shock ASTM D 2671/ 200C, 30mins. No splitting, cracking, dropping, flowing Dielectric constant IEC 250 15 ~ 35 Loss factor(50Hz) IEC 250 $1.0 (1000V) Volume resistance IEC 93 210110 .cm Water absorption ISO 62 <1.0% Amphenol Normal size |_As supplied(mm) After recovered(mm) Standard length Black 00 Item D d tu Tube Shape No _ Inside diameter | Inside diameter | Wall thickness a (meters/roll) amphenoliaiN Description (Min) (Max) (Min) CUSTOMER 1 30/12 30 12 2.2 O 1.22 HST ASC-100 30.0/12.0 (00) AHSC-100 30MM ELECTRIC STRESS RELIEF TUBE BK 2 35/15 35 15 2.3 oO 1.22 HST ASC-100 35.0/15.0 (00) AHSC-100 35MM ELECTRIC STRESS RELIEF TUBE BK 3 40/16 40 16 2.4 oO 1.22 HST ASC-100 40.0/16.0 (00) AHSC-100 40MM ELECTRIC STRESS RELIEF TUBE BK 4 47/18 47 18 2.4 oO 1.22 HST ASC-100 47.0/18.0 (00) AHSC-100 47MM ELECTRIC STRESS RELIEF TUBE BK 5 55/21 55 21 2.4 oO 1.22 HST ASC-100 55.0/21.0 (00) AHSC-100 55MM ELECTRIC STRESS RELIEF TUBE BK 6 65/25 65 25 2.4 oO 1.22 HST ASC-100 65.0/25.0 (00) AHSC-100 65MM ELECTRIC STRESS RELIEF TUBE BK 7 75/30 75 30 2.4 oO 1.22 HST ASC-100 75.0/30.0 (00) AHSC-100 75MM ELECTRIC STRESS RELIEF TUBE BK Applicati : pplications: The specially designed chemical formulation of the ASC-100 is carefully controlled during the manufacturing process as to effectively release the high electrical stress present at the insulation screen in the termination and joints of power cables from 11 kV to 24kV. Ordering information: Standard colors: Black Special colors: N/A Packaging: Special: 1m; 1.2m pieces are available on request Other: Custom lengths are available, please contact our sales department for further information.ASC-360 stress Control Tubing Am phenol Normal size |_As supplied(mm) After recovered(mm) Standard length Black 00 vem Inside Inside Se Wall nica Tube Shape (meters/roll) amphencliiy Description ex mm (Min) (Max) (Min) CUSTOMER Y y 1 35/15 35 15 2.3 oO 1.22 HST ASC-360 35.0/15.0 (00) ASC-360 35MM ELECTRIC STRESS RELIEF TUBE BK ye 2 47/18 47 18 2.4 oO 1.22 HST ASC-360 47.0/18.0 (00) ASC-360 47MM ELECTRIC STRESS RELIEF TUBE BK 3 55/21 55 21 2.4 oO 1.22 HST ASC-360 55.0/21.0 (00) ASC-360 55MM ELECTRIC STRESS RELIEF TUBE BK 4 65/25 65 25 2.4 oO 1.22 HST ASC-360 65.0/25.0 (00) ASC-360 65MM ELECTRIC STRESS RELIEF TUBE BK 5 75/30 75 30 2.4 oO 1.22 HST ASC-360 75.0/30.0 (00) ASC-360 75MM ELECTRIC STRESS RELIEF TUBE BK or - A 3 Features: = Modified polyolefin M@ Up to 36kV @O M Stress control tubing Min. shrink temp.: 100C e. Excellent electrical & shrinking properties Min. full recovery temp.: 130C = o =r i>) = = a =) fo] st Technical properties: pe) xe) sd Property Test Method Typical Data Applications: Tensile strength ASTM D 2671 210 MPa The specially designed chemical formulation of the ASC-360 is carefully controlled during the manufacturing process as to Ultimate elongation ASTM D 2671 >300% effectively release the high electrical stress present at the insulation screen in the termination and joints of power cables up to 36kV. Longitudinal shrinkage UL 224 0~-10% . . . Ordering information: Heat shock ASTM D 2671/ 200C, 30mins. No splitting, cracking, dropping, flowing Standard colors: Dielectric constant IEC 250 35 ~ 55 Black Loss factor(50Hz) IEC 250 <1.0 (1000V) Special colors: N/A Volume resistance IEC 93 2109Q .cm . Packaging: Water absorption ISO 62 <1.0% Standard packaging is 1m, 1.2m, 1.5m. Other: Custom lengths are available, please contact our sales department for further information.Semi-Conductive/Insulation Double Layer Tubing Amphenol Normal size |_As supplied(mm) After recovered(mm) Standard length Black 00 em D d ie ube shape a maT Inside diameter | Inside diameter | Wall thickness Tube Shap: (meters/roll) amphencliiy Description gy (Min) (Max) (Min) CUSTOMER Y h: 1 36/12 36.0 12.0 5.4 O 1.22 HST ADWT 36.0/12.0 (00) ADWT 36MM DOUBLE INSULATION TUBE BK seat 2 45/15 45.0 15.0 5.4 oO 1.22 HST ADWT 45.0/15.0 (00) ADWT 45MM DOUBLE INSULATION TUBE BK 3 55/18 55.0 18.0 5.4 oO 1.22 HST ADWT 55.0/18.0 (00) ADWT 55MM DOUBLE INSULATION TUBE BK 4 62/18 62.0 18.0 5.9 Oo 1.22 HST ADWT 62.0/18.0 (00) ADWT 62MM DOUBLE INSULATION TUBE BK 5 65/22 65.0 22.0 6.0 oO 1.22 HST ADWT 66.0/22.0 (00) ADWT 65MM DOUBLE INSULATION TUBE BK 6 73/26 73.0 26.0 6.0 oO 1.22 HST ADWT 73.0/26.0 (00) ADWT 73MM DOUBLE INSULATION TUBE BK 7 85/30 85.0 30.0 6.0 oO 1.22 HST ADWT 85.0/30.0 (00) ADWT 85MM DOUBLE INSULATION TUBE BK 8 100/38 100.0 38.0 6.0 oO 1.22 HST ADWT 100.0/38.0 (00) ADWT 100MM DOUBLE INSULATION TUBE BK Features: = Semi-conductive/insulating dual wall tubing Extra heavy wall of insulation layer 40) Crosslinked polyolefin Up to 36kV e. Co-extrusion technology Min. shrink temp.: 100C ro Excellent electrical properties Min. full recovery temp.: 130C o =r i) a . . = Technical properties: a =) fo] : Property Test Method Typical Data oa Inner layer ry y ie Tensile strength ASTM D 2671 >12 MPa Ultimate elongation ASTM D 2671 2300% Applications: Density ASTM D 792 1.15g/cm$ PP Volume resistance IEC 93 510140 om This tubing is manufactured with a semi-conductive/insulating dual wall and is suitable for applications with power cable joints up to 36kV. Dielectric strength IEC 60243 220kV/mm Water absorption ISO 62 <0.5% Orderi ng information: External layer y Standard colors: Tensile strength ASTM D 2671 214 MPa Black Ultimate elongation ASTM D 2671 2300% Special colors: Density ASTM D 792 1.15g/cm$ N/A Volume resistance IEC 93 <10 40 .cm Packaging: Water absorption ISO 62 <0.5% Standard packaging is 1m, 1.2m. Other: Custom lengths are available, please contact our sales department for further information.= @o < = = a =r (a @O = = J =) io} a i) SG i) AGT High Insulation Tubing yy Ye Features: Insulating tubing MM Up to 36kV Crosslinked polyolefin Heavy wall M Excellent insulating properties UV and weather resistant Technical properties: Operating temp.: -40C to +110C Min. shrink temp.: 90C Min. full recovery temp.: 110C Property Test Method Typical Data Tensile strength ASTM D 2671 212 MPa Ultimate elongation ASTM D 2671 2300% Density ASTM D 792 1.0 g/cm Longitudinal shrinkage UL 224 0~-10% Dielectric strength IEC 60243 220kV/mm Volume resistance IEC 93 210140 .cm Dielectric constant IEC 250 <3.0 Water absorption ISO 62 <0.5% Amphenol Normal size |_As supplied(mm) After recovered(mm) Standard length Red 02 Item D d tu Tube Shape No _ Inside diameter | Inside diameter | Wall thickness B (meters/roll) Amphenol Description (Min) (Max) (Min) CUSTOMER 1 35/12 35.00 12.00 3.20 oO 1.22 HST AGT 35.0/12.0 (02) AGT 35MM HIGH INSULATION TUBE RED 2 45/14 45.00 14.00 3.50 oO 1.22 HST AGT 45.0/14.0 (02) AGT 40MM HIGH INSULATION TUBE RED 3 55/18 55.00 18.00 3.90 oO 1.22 HST AGT 55.0/18.0 (02) AGT 55MM HIGH INSULATION TUBE RED 4 62/18 62.00 18.00 3.90 oO 1.22 HST AGT 62.0/18.0 (02) AGT 62MM HIGH INSULATION TUBE RED 5 66/20 66.00 20.00 4.40 oO 1.22 HST AGT 66.0/20.0 (02) AGT 66MM HIGH INSULATION TUBE RED 6 75/25 75.00 25.00 5.00 oO 1.22 HST AGT 75.0/25.0 (02) AGT 75MM HIGH INSULATION TUBE RED 7 85/25 85.00 25.00 5.00 oO 1.22 HST AGT 85.0/25.0 (02) AGT 85MM HIGH INSULATION TUBE RED 8 95/30 95.00 30.00 5.00 oO 1.22 HST AGT 95.0/30.0 (02) AGT 95MM HIGH INSULATION TUBE RED 9 100/38 100.00 38.00 5.00 Oo 1.22 HST AGT 105.0/40.0 (02) AGT 105MM HIGH INSULATION TUBE RED 10 120/45 120.00 45.00 5.00 1.22 HST AGT 120.0/45.0 (02) AGT 120MM HIGH INSULATION TUBE RED Applicati : pplications: AGT is made from radiation crosslinked polyolefin and designed to seal and protect power cable joints from 11 kV to 36kV. Ordering information: Standard colors: Red Special colors: N/A Packaging: Standard packaging of 1m, 1.2m, 1.5m pieces are available on request. Other: Custom lengths are available, please contact our sales department for further information.= @o < = = a =r (a @O = = J =) io} a i) SG i) AOT Oil Resistant Tubing yy ; Rey, i> Features: Designed for paper insulated cables M Up to 36kV Crosslinked polyolefin Oil resistant UV and weather resistant Technical properties: Operating temp.: -40C to +110C Min. shrink temp.: 110C Min. full recovery temp.: 130C Property Test Method Typical Data Tensile strength ASTM D 2671 213 MPa Ultimate elongation ASTM D 2671 2400% Longitudinal shrinkage UL 224 0~-10% Dielectric strength IEC 60243 220kV/mm Volume resistance IEC 93 210140 .cm Water absorption ISO 62 <0.5% Oil resistance Transform oil/24 hrs. Weight increase <10% Amphenol Normal size |_As supplied(mm) After recovered(mm) Standard length Clear X Item D d tu Tube Shape No _ Inside diameter | Inside diameter | Wall thickness a (meters/roll) amebencili Description (Min) (Max) (Min) CUSTOMER 1 19/6 19 6 2.0 30 HST AOT 19.0/6.0 (X) AOT 19MM OIL-RESISTANT TUBE CLEAR 2 25/10 25 10 2.0 30 HST AOT 25.0/10.0 (x) AOT 25MM OIL-RESISTANT TUBE CLEAR 3 30/12 30 12 2.0 30 HST AOT 30.0/12.0 (X) AOT 30MM OIL-RESISTANT TUBE CLEAR 4 35/14 35 14 2.5 30 HST AOT 35.0/14.0 (X) AOT 35MM OIL-RESISTANT TUBE CLEAR 5 40/16 40 16 2.5 30 HST AOT 40.0/16.0 (x) AOT 40MM OIL-RESISTANT TUBE CLEAR 6 50/20 50 20 2.5 15 HST AOT 50.0/20.0 (X) AOT 50MM OIL-RESISTANT TUBE CLEAR 7 65/25 65 25 2.9 15 HST AOT 65.0/25.0 (X) AOT 65MM OIL-RESISTANT TUBE CLEAR 8 85/35 85 35 2.9 15 HST AOT 85.0/35.0 (X) AOT 85MM OIL-RESISTANT TUBE CLEAR Applicati : pplications: AOT is manufactured with radiation crosslinked oil resistant polyolefin, and suitable for applications in power cable terminations and joints up to 36kV. Ordering information: Standard colors: Clear Special colors: N/A Packaging: Standard packaging on spools. Special: 1m, 1.2m, 1.5m pieces are available on request. Other: Custom lengths are available, please contact our sales department for further information= od oY fot m0} as 7 ASEC Cable End Caps with Spiral Adhesive Coating Features: be Amphenol Specifications Black 00 HSEC: insulation cable end cap Crosslinked polyolefin Excellent sealing properties UV and weather resistant EXPANDED (AS SUPPLIED) Available with or without adhesive Operating temp.: -55C to +110C Min. full recovery temp.: 120C STANDARD PART (AFTER UNRESTRICTED RECOVERY) Technical properties: Size As supplied (mm) After recovered (mm) Amphenol P/N . mm L*(+10%) D*(Min) A*(+10%) d*(Min) F(410%) w*(+10%) CUSTOMER Description ASEC105 12/4 38 12 15 4 40 2.6 HST ASEC 105 12/4 (00) ASEC CABLE END CUP WITH ADHESIVE 105 BK ASEC110 14/5 47 14 18 5 42 2.2 HST ASEC 110 14/5 (00) ASEC CABLE END CUP WITH ADHESIVE 110 BK ASEC115 20/6 65 20 25 6 55 28 HST ASEC 115 20/6 (00) ASEC CABLE END CUP WITH ADHESIVE 115 BK ASEC120 25/85 75 25 30 85 65 28 HST ASEC 120 25/8.5 (00) ASEC CABLE END CUP WITH ADHESIVE 120 BK ASEC130 35/16 92 35 35 16 83 3.3 HST ASEC 130 35/16 (00) ASEC CABLE END CUP WITH ADHESIVE 130 BK ASEC135 40/15 95 40 40 15 75 3.3 HST ASEC 135 40/15 (00) ASEC CABLE END CUP WITH ADHESIVE 135 BK ASEC140 55/26 114 55 50 26 105 3.5 HST ASEC 140 55/26 (00) ASEC CABLE END CUP WITH ADHESIVE 140 BK ASEC150 75/36 132 75 55 36 115 4 HST ASEC 150 75/36 (00) ASEC CABLE END CUP WITH ADHESIVE 150 BK ASEC160 100/52 153 100 70 52 130 4 HST ASEC 160 100/52 (00) ASEC CABLE END CUP WITH ADHESIVE 160 BK ASEC170 120/60 155 120 70 150 42 HST ASEC 170 120/60 (00) ASEC CABLE END CUP WITH ADHESIVE 170 BK ASEC180 145/60 160 145 70 150 42 HST ASEC 180 145/60 (00) ASEC CABLE END CUP WITH ADHESIVE 180 BK ASEC190 160/82 160 160 70 82 135 45 HST ASEC 190 160/82 (00) ASEC CABLE END CUP WITH ADHESIVE 190 BK ASEC200 200/90 170 200 70 90 145 45 HST ASEC 200 200/90 (00) ASEC CABLE END CUP WITH ADHESIVE 200 BK ASECI10L 14/5 66 14 30 5 55 2.2 HST ASEC 110L 14/5 (00) ASEC CABLE END CUP WITH ADHESIVE 110L BK ASEC130L 40/15 110 42 40 15 95 3.3 HST ASEC 130L 40/15 (00) ASEC CABLE END CUP WITH ADHESIVE 130L BK ASECI40L 55/23 150 55 70 24 137 38 HST ASEC 140L 55/23 (00) ASEC CABLE END CUP WITH ADHESIVE 140L BK ASECI45L 62/23 150 62 70 24 132 38 HST ASEC 145L 62/23 (00) ASEC CABLE END CUP WITH ADHESIVE 145L BK ASECISOL 75/32 170 75 70 32 140 4 HST ASEC 150L 75/32 (00) ASEC CABLE END CUP WITH ADHESIVE 150L BK ASECIS5OXL 75/36 165 75 70 36 165 42 HST ASEC 150XL 75/36 (00) ASEC CABLE END CUP WITH ADHESIVE 150XL BK ASECI60L 105/45 162 105 65 45 135 4 HST ASEC 160L 105/45 (00) ASEC CABLE END CUP WITH ADHESIVE 160L BK Property Test Method Typical Data Tensile strength ASTM D 2671 211 MPa Ultimate elongation ASTM D 2671 2400% Density ASTM D 792 1.05g/cm3 Ultimate elongation after aging ASTM D 2671/150C, 168hrs. 2300% Dielectric strength IEC 60243 215kV/mm Volume resistance* IEC 93 210140 .cm Applications: ASEC is recommended for applications both in open air and underground power distribution cables with PVC, lead or XLPE sheaths. Ordering information: Standard colors: Black Special colors: N/A Packaging: Standard packaging: BaggedAAS Amphenol Anti-Tracking Rain Shed = od oY fot m0} as 7 Features: Specifications Red 02 Size As supplied (mm) After recovered (mm) Amphenol P/N Description i ~y mm L*(410%) D*(Min) H*(Nom) d*(Min) b*(+10%) w*(+10%) CUSTOMER (4 % y v AAS110 35/12 20 35 95 12 18 3.0 HST AAS110 35/12 (02) AAS ANTI-TRACKING RAIN SHEDS 110 RED ie AAS120 48/20 28 48 120 20 20 3.3 HST AAS120 48/20 (02) AAS ANTI-TRACKING RAIN SHEDS 120 RED AAS130 60/25 30 60 120 25 2 33 HST AAS130 60/25 (02) AAS ANTI-TRACKING RAIN SHEDS 130 RED AAS140 60/30 35 60 140 30 30 3.5 HST AAS140 60/30 (02) AAS ANTI-TRACKING RAIN SHEDS 140 RED AASI150 75/30 35 75 140 30 30 3.5 HST AAS150 75/30 (02) AAS ANTI-TRACKING RAIN SHEDS 150 RED AAS160 100/35 35 100 140 35 30 3.5 HST AAS160 100/35 (02) AAS ANTI-TRACKING RAIN SHEDS 160 RED Crosslinked polyolefin Red mastic applied to collars lM UV and weather resistant Technical properties: Anti-tracking Min. full recovery temp.: 110C Property Test Method Typical Data Tensile strength ASTM D 2671 213 MPa Ultimate elongation ASTM D 2671 2400% Heat aging Tensile strength ASTM D 2671/120C, 168 hrs. 210.4 MPa Ultimate elongation 2350 % Dielectric strength IEC 60243 215kV/mm Tracking resistance ASTM D 2303 /3.75kV, 1 hr. Pass Dielectric constant IEC 250 $3.0 Volume resistance IEC 93 210140 .cm Flammability (Oxygen Index ) ISO 4589 225 Copper corrosion ASTM D 2671 No corrosion Cold bend ASTM D 2671/-40C, 4 hrs. No cracking EXPANDED (AS SUPPLIED) 6D | Applications: Used to provide insulation protection for outdoor cable terminations. Ordering information: Standard colors: Red Special colors: N/A Packaging: Standard packaging: Bagged STANDARD PART (AFTER UNRESTRICTED RECOVERY) Ww od | 4 A A) iQ 8 i iAMB Medium Voltage 3 Cores Cable Breakout Amphenol Specifications Red 02 Size As supplied (mm) After recovered (mm) Amphenol P/N . a ~y mm H*(+10% ) | F*(+10% ) | D*(Min) | S*(Min) | d*(Min) | c*(Min) | L*(+10%)} b*(+10%) | dw*(+10%)| Iw*(+10%) CUSTOMER Description i o AMB320 60/24-26/7 190 38 60 26 24 7 180 40 3.0 26 HST AMB320 60/24-26/7 (02) | AMB MEDIUM VOLTAGE 3 CORES CABLE BREAKOUT 60 RED st AMB330 80/38-34/14 215 50 80 34 38 14 210 60 4.0 3.6 HST AMB330 80/38-34/14 (02) | AMB MEDIUM VOLTAGE 3 CORES CABLE BREAKOUT 80 RED AMB340 110/50-46/18 220 55 110 46 50 18 230 55 38 35 HST AMB340 110/50-46/18 (02) | AMB MEDIUM VOLTAGE 3 CORES CABLE BREAKOUT 110 RED AMB350 125/55-57/20 230 58 125 57 55 20 240 65 3.7 3.2 HST AMB350 125/55-57/20 (02) | AMB MEDIUM VOLTAGE 3 CORES CABLE BREAKOUT 125 RED AMB360 140/70-64/26 250 58 140 64 70 26 270 65 40 3.8 HST AMB360 140/70-64/26 (02) | AMB MEDIUM VOLTAGE 3 CORES CABLE BREAKOUT 140 RED EXPANDED (AS SUPPLIED) . Features: OT STANDARD PART (AFTER UNRESTRICTED RECOVERY) Crosslinked polyolefin Anti-tracking rt! OALIAIEEE n C) With red mastic/hot melt adhesive Min. full recovery temp.: 110C a . gf {Ae ; S UV and weather resistant | saa = ~ , Rea waterproof o jo i) . U =I 71) Technical properties: Property Test Method Typical Data Tensile strength ASTM D 2671 28 MPa Applications: Ultimate elongation ASTM D 2671 2300% Used to safely protect cable ends up to 36kV against flashover, or surges induced during in-service life in switch gear and transformer boxes. Heat aging Tensile strength ASTM D 2671/120C, 168 hrs. 27 MPa . . . . Ultimate elongation >200 % Ordering information: Dielectric strength IEC 60243 220kV/mm Standard colors: Red Tracking resistance ASTM D 2303 /3.75kV, 1 hr. Pass Special colors: Volume resistance IEC 93 210130 .cm N/A Water absorption ISO 62 <1.0% Packaging: Standard packaging: BaggedrN a Amphenol Medium Voltage Right/Straight Cable Boot Specifications Red 02 Size As supplied (mm) After recovered (mm) Amphenol P/N = Shap Description a mm H(#10% )| FA#10% ) | D*(Min) | S*(Min) | d*(Min) | cX(Min) | L*(410%)| b*10%) | cdw(410%)| Iw*(t10%) CUSTOMER Y AMR MEDIUM VOLTAGE Si od AMR110 80/36-35/18 | 150 125 80 35 36 1s | 160 125 35 35 HST AMR1LO (80/36-35/18) (02) RIGHT CABLE BOOT L10 RED AMR MEDIUM VOLTAGE AMR120 80/36-50/18 | 150 125 80 50 36 1s | 160 125 35 35 HST AMR120 (80/36-50/18) (02) RIGHT CABLE BOOT 120 RED RIGHT AMR MEDIUM VOLTAGE AMR130 80/36-50/27 | 150 140 80 50 36 a | us 135 36 33 CABLE Boor | HST AMR130 (80/36-50/27) (02) RIGHT CABLE BOOT 130 RED AMR MEDIUM VOLTAGE AMR140 95/38-70/28 | 155 150 95 70 38 28 | 155 130 38 38 HST AMR140 (95/38-70/28) (02) RIGHT CABLE BOOT 140 RED AMR MEDIUM VOLTAGE AMRI150 145/72-68/34 190 155 145 68 72 34 195 165 38 38 HST AMR150 (145/72-68/34) (02) RIGHT CABLE BOOT 150 RED AMR160 80/35-34/20 | 190 70 80 34 35 20 | 200 80 3.0 3.0 HST AMR160 (80/35-34/20) (02) | HST AMRIL6O (80/35-34/20) (02) STRAIGHT HST AMR170 (80/35- (02) AMR170 80/35-58/20 | 195 70 80 58 35 20 | 200 80 3.0 3.0 CABLE BOOT | HST AMR170 (80/35-58/20) (02) 58/20) AMR180 140/65-90/33 | 295 165 uo | 90 65 33 | 320 | 170 38 38 HST AMR180 (140/65-90/33) (02) | HST AMRLBO (140/65-90/33) (02) Features: Crosslinked polyolefin With anti-track red mastic UV and weather resistant Anti-tracking Min. full recovery temp.: 110C EXPANDED (AS_SUPPLLED) H STANDARD PART (AFTER UNRESTRICTED RECOVERY) EXPANDED (AS SUPPLIED) STANDARD PART (AFTER UNRESTRICTED RECOVERY) aD Red waterproof awe 3 _ STRAIGHT CABLE BOOT RIGHT CABLE BOOT = od oY fot m0} as 7 Technical properties: Property Test Method Typical Data Tensile strength ASTM D 2671 212 MPa Ultimate elongation ASTM D 2671 2300% Heat aging Applications: Tensile strength ASTM D 2671/120C, 168 hrs. 28.5 MPa Ultimate elongation 2200 % Used to safely protect cable ends up to 36kV against flashover, or surges induced during in-service life in switch Dielectric strength IEC 60243 >15kV/mm gear and transformer boxes. Volume resistance IEC 93 210139 .cm . . . Ordering information: Tracking resistance ASTM D 2303/3.75kV, hr. Pass Standard colors: Water absorption ISO 62 <1.0% Red Flammability (oxygen index) ISO 4589 225 Special colors: N/A Copper corrosion ASTM D 2671/120C,168 hrs. No corrosion Cold bend Packaging: ASTM D 2671/-40C,4 hrs. No cracking Standard packaging: BaggedACFT cable Feed Throughs Amphenol Specifications Black 00 Size As supplied (mm) After recovered (mm) Amphenol P/N a eo mm H(#10% )] F#10% ) | D*eviin) | savin) | d*(Min) | c*qviin) |+10%)| b*+10%)] dw*(10%)| IwAe10%) CUSTOMER al i o ACFTLIO 85/42-15/5 | 115 40 85 15 42 5 125 45 25 28 | HST ACET 110 (85/42-15/5) 00) | ACFT LOW VOLTAGE SINGLE CORE CABLE BREAKOUT 110 BK = ACFT120 60/30-45/10 | 125 55 60 45 30 10 130 55 25 45 | HST ACFT 120 (60/30-45/10) (00) | ACFT LOW VOLTAGE SINGLE CORE CABLE BREAKOUT 120 BK ACFT130 100/52-20/8 | 150 55 100 | 20 50 8 170 65 3.0 3.0 | HST ACFT 130(100/52-20/8) (00) | ACFT LOW VOLTAGE SINGLE CORE CABLE BREAKOUT 130 BK ACFTL3OL 100/52-20/8| 175 55 100 20 52 8 190 65 3.0 3.0 | HST ACFT 130L (100/52-20/8) (00) | ACFT LOW VOLTAGE SINGLE CORE CABLE BREAKOUT 1301 BK ACFTI35 150/92-14/5 | 130 55 150 14 92 5 150 55 35 35 | HST ACFT 135 (150/92-14/5) (00) | ACFT LOW VOLTAGE SINGLE CORE CABLE BREAKOUT 135 BK ACFTI40 160/92-60/20| 125 35 160 60 92 20 M45 55 32 3.0 | HST ACFT 140 (160/92-60/20) (00)| ACFT LOW VOLTAGE SINGLE CORE CABLE BREAKOUT 140 BK |ACFT150 160/92-100/45| 125 35 160 | 100 92 45 145 55 35 3.2 |HST ACFT 150(160/92-100/45) (00)| ACFT LOW VOLTAGE SINGLE CORE CABLE BREAKOUT 150 BK Features: Crosslinked polyolefin MAdhesivelined 0 x TANDA . Dae . iby Superior environmental protection Operating temperature: -55C to +110C 5 STANDARD PART (AFTER UNRESTRICTED RECOVERY) l Fast recovery Min. full recovery temp.: 110C i 4 pee UV and weather resistant Gee S Ss = EE Gassscssssens s a <= FE tf SE a kb = C a J | | _2____- a 3 | @ a. 8) A 7) Technical properties: Property Test Method Typical Data Applications: Tensile strength ASTM D 2671 213 MPa This specially designed structure can be used for sealing vacant cable ducts and pipe protection. Ultimate elongation ASTM D 2671 2300% Ordering information: Heat aging Tensile strength ASTM D 2671/120C, 168 hrs. 210 MPa Ultimate elongation 2250 % Standard colors: Black Dielectric strength IEC 60243 215kV/mm Special colors: Volume resistance IEC 93 2101430 cm N/A Water absorption ISO 62 <1.0% Packaging: Standard packaging: BaggedSHEd PepiolW yA = Voltage Cable Breakout 2 to 5 Cores a Features: Amphenol Specifications Black 00 Adhesive lined Operating temperature: -55C to +110C Min. shrinking temp.: 110C Min. full recovery temp.: 130C Crosslinked polyolefin Excellent sealing properties Available for 2 to 5 cores cables UV and weather resistant STANDARD PART (AFTER UNRESTRICTED RECOVERY) 2 olw Technical properties: Size As supplied (mm) After recovered (mm) Amphenol P/N . mm He10% ) | Fe(e10% ) | D*(Min) | stein) | decmtiny | cr(Min) | +C10%)] b*(10%) | dw*(+10%)] Iw*(e10%) CUSTOMER De cipticn 2 Cores ALB205 22/8 55 16 22 11 8 3.5 60 18 2.2 1.8 HST ALB205 22/8 (00) ALB 2 CORES CABLE BREAKOUT 22MM BK ALB210 30/12 83 22 30 14 12 45 84 21 2.3 2.2 HST ALB210 30/12 (00) ALB 2 CORES CABLE BREAKOUT 30MM BK ALB215 40/16 100 30 40 15 16 5 110 30 2.2 2.2 HST ALB215 40/16 (00) ALB 2 CORES CABLE BREAKOUT 40MM BK ALB220 60/23 98 21 60 25 16 75 105 25 2.4 2.4 HST ALB220 60/23 (00) ALB 2 CORES CABLE BREAKOUT 60MM BK ALB220L 60/23 140 42 60 25 23 75 145 45 2.4 2.4 HST ALB220L 60/23 (00) ALB 2 CORES CABLE BREAKOUT 60LMM BK ALB230 90/60 165 45 90 30 60 8 170 48 3 3 HST ALB230 90/60 (00) ALB 2 CORES CABLE BREAKOUT 90MM BK ALB240 150/90 145 65 150 19 90 6 155 70 3.6 3.3 HST ALB240 150/90 (00) ALB 2 CORES CABLE BREAKOUT 150MM BK 3 Cores ALB310 38/16 100 35 38 15 16 5 100 32 2.2 1.8 HST ALB310 38/16 (00) ALB 3 CORES CABLE BREAKOUT 38MM BK ALB310L 40/16 120 35 40 15 16 5 120 32 2.2 1.8 HST ALB310L 40/16 (00) ALB 3 CORES CABLE BREAKOUT 40MM BK ALB320 60/25 170 40 60 26 25 7.5 170 40 3.2 2.8 HST ALB320 60/25 (00) ALB 3 CORES CABLE BREAKOUT 60MM BK ALB330 80/36 190 50 80 34 38 14 195 52 3.5 3.2 HST ALB330 80/36 (00) ALB 3 CORES CABLE BREAKOUT 80MM BK ALB330L 80/38 215 50 80 34 38 14 210 60 3.5 3.2 HST ALB330L 80/38(00) ALB 3 CORES CABLE BREAKOUT 80MM BK ALB340 110/50 220 55 110 46 50 46 230 60 3.7 3.3 HST ALB340 110/50(00) ALB 3 CORES CABLE BREAKOUT 110MM BK ALB350 125/57 230 58 125 57 57 20 240 65 3.7 3.3 HST ALB350 125/57(00) ALB 3 CORES CABLE BREAKOUT 125MM BK ALB360 140/70 250 58 140 62 70 24 270 68 3.9 3.6 HST ALB360 140/70(00) ALB 3 CORES CABLE BREAKOUT 140MM BK ALB370 170/77 250 55 170 76 77 28 270 68 3.9 3.6 HST ALB370 170/77(00) ALB 3 CORES CABLE BREAKOUT 170MM BK 4 Cores ALB410 40/15-12/4 95 23 40 12 15 45 100 24 2.2 2.0 HST ALB410 40/15-12/4 (00) ALB 4 CORES CABLE BREAKOUT 40MM BK ALB420 55/21-20/6 145 35 55 20 21 6.0 150 42 2.9 2.7 HST ALB420 55/21-20/6 (00) ALB 4 CORES CABLE BREAKOUT 55MM BK ALB425 65/26-25/7 170 45 65 25 26 75 180 50 3.3 3.1 HST ALB425 65/26-25/7 (00) ALB 4 CORES CABLE BREAKOUT 65MM BK ALB430 75/26-28/7 170 45 75 28 26 75 180 50 3.3 3.1 HST ALB430 75/26-28/7 (00) ALB 4 CORES CABLE BREAKOUT 75MM BK ALB440 82/37-30/10 170 45 82 30 37 11.0 180 45 3.3 2.8 HST ALB440 82/37-30/10 (00) ALB 4 CORES CABLE BREAKOUT 82MM BK ALBA4S5 90/37-32/10 170 45 90 32 37 11.0 180 45 3.3 2.8 HST ALB445 90/37-32/10 (00) ALB 4 CORES CABLE BREAKOUT 90MM BK ALB450 100/45-38/12 180 55 100 38 47 12 190 55 3.9 3.3 HST ALB450 100/45-38/12 (00)| | ALB 4 CORES CABLE BREAKOUT 100MM BK ALB460 125/52-52/14 215 50 125 52 52 14 240 68 4.0 4.2 HST ALB460 125/52-52/14 (00) ALB 4 CORES CABLE BREAKOUT 125MM BK ALB470 160/70-64/20 240 50 160 64 70 20 270 68 3.8 3.7 HST ALB470 160/70-64/20 (00) ALB 4 CORES CABLE BREAKOUT 160MM BK 5 Cores ALB510 40/19-13/4 90 20 40 13 19 45 85 20 2.7 2.2 HST ALB510 40/19-13/4 (00) ALB 5 CORES CABLE BREAKOUT 40MM BK ALB520 55/24-18/5 145 36 55 18 24 5 150 40 3 2.5 HST ALB520 55/24-18/5 (00) ALB 5 CORES CABLE BREAKOUT 55MM BK ALB530 80/33-26/8 160 46 80 26 33 8 170 50 3.2 3 HST ALB530 80/33-26/8 (00) ALB 5 CORES CABLE BREAKOUT 80MM BK ALB540 100/42-35/10 185 52 100 35 42 10 195 55 3.5 3.2 HST ALB540 100/42-35/10 (00)| ALB 5 CORES CABLE BREAKOUT 100MM BK Property Test Method Typical Data Tensile strength ASTM D 2671 213 MPa Ultimate elongation ASTM D 2671 2300% Heat aging Tensile strength ASTM D 2671/120C, 168 hrs. 210 MPa Ultimate elongation 2250 % Dielectric strength IEC 60243 215kV/mm Volume resistance IEC 93 21013Q .cm Water absorption ISO 62 $1.0% Applications: ALB provides electrical insulation, UV resistance and ingress protection. Widely used in the electric power industry to provide insulation and sealing over the crutch of multi-core cables. Ordering information: Standard colors: Black Special colors: N/A Packaging: Standard packaging: BaggedAN @4 = Mao chore terisaciceicar Amphenol Specifications Black 00 Size As supplied (mm) After recovered(mm) Amphenol P/N a omy mm H(#10% ) | F'(410% ) | D4Min) | s*vin) | a*(Min) | c*(Min) | 410%] b*(210%) | dw*(+10%)| Iw*(#10%) CUSTOMER Description A o ACB320 60/24-26/7 | 175 40 60 26 2 | 75 | 170 40 28 28 | HST ACB320 60/24-26/7 (00) | ACB 3 CORES CONDUCTIVE CABLE BREAKOUT 60MM BK ae ACB330 80/36-34/14 | 200 50 80 34 38 14 215 52 35 3.2 | HST ACB330 80/36-34/14 (00) | ACB 3 CORES CONDUCTIVE CABLE BREAKOUT 80MM BK ACB340 110/50-46/18| 210 55 uo | 46 50 1s | 230 60 35 3.3 |HST ACB340 110/50-46/18 (00) | ACB 3 CORES CONDUCTIVE CABLE BREAKOUT 110MM BK ACB350 125/57-55/20| 220 58 125 55 57 20 240 65 35 3.3. |HST ACB350 125/57-55/20 (00)| CB 3 CORES CONDUCTIVE CABLE BREAKOUT 125MM BK ACB360 140/70-64/24| 250 58 140 62 70 24 270 68 35 3,6 |HST ACB360 140/70-64/24 (00)| ACB 3 CORES CONDUCTIVE CABLE BREAKOUT 140MM BK ieee STANDARD PART (AFTER UNRESTRICTED RECOVERY) Features: ao S : JS} oo . Seed polyolefin @ Operating temperature: -55C to +105C Red waterproof glue F onductive ; ; @ Min. shrinking temp.: 110C ad Anti-tracking red mastic applied Min. full recovery temp.: 130C M@ UV and weather resistant H I = od oY fot m0} as 7 Technical properties: Applications: Property Test Method Typical Data . . . . . . . . . : ACB is an electrically semi-conductive cable breakout that provides effective conductive screening and sealing protection to cable terminations. The breakout can be used on cable terminations up to 36kV. Tensile strength ASTM D 2671 212 MPa Ordering information: Ultimate elongation ASTM D 2671 2250% ; Standard colors: Heat aging Black Tensile strength ASTM D 2671/120C, 168 hrs. 210 MPa ac Ultimate elongation 2200 % ; Special colors: Volume resistance GB/T <104Q .cm N/A Water absorption ISO 62 <1.0% Packaging: Standard packaging: Bagged= od oY fot m0} as 7 ARAZ Medium Wall Tubing With Hot Melting Adhesive Amphenol Features: Medium wall tubing with/without adhesive lM Good environmental protection Good electrical & mechanical performance @ Ideal for LV application Technical properties: @ UV resistant MH Operating temp.: -55C to +110C Min. full recovery temp.: 120C MH Voltage: / Property Test Method Typical Data Property of jacket Tensile strength ASTM D 2671 214 MPa Ultimate elongation ASTM D 2671 2400% Heat aging Tensile strength ASTM D 2671(150C, 168 hrs.) 212 MPa Ultimate elongation 2300% Density ASTM D 792 1.05g/cms Longitudinal shrinkage UL 224 0~-12% Dielectric strength IEC60243 218 kV/mm Volume resistance IEC 93 210130.cm Copper stability ASTM D 2671 Pass Water absorption ISO 62/23C ,14days <0.15% Property of adhesive Water absorption ISO 62 <0.2% Softening point ASTM E28 85+5C Peel strength (PE) DIN 30672 4N/cm Resistance to fungus and decay ISO 846 Pass Normal size |_AS supplied(mm) After recovered(mm) Standard length Black 00 vem _ Inside diameter Inside Se Wall wicks Tube Shape (meters/roll) emphencliin Description (Min) (Max) (Min) CUSTOMER 1 22/6 22 6 24 Oo 1.22 HST ARA2 22.0/6.0 (00) ARA2 22.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 2 28/6 28 6 2.7 oO 1.22 HST ARA2 28.0/6.0 (00) ARA2 28.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 3 33/8 33 8 2.6 oO 1.22 HST ARA2 33.0/8.0 (00) ARA2 33.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 4 40/12 40 12 2.6 oO 1.22 HST ARA2 40.0/12.0 (00) ARA2 40.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 5 55/16 55 16 2.7 oO 1.22 HST ARA2 55.0/16.0 (00) ARA2 55.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 6 65/19 65 19 2.9 oO 1.22 HST ARA2 65.0/19.0 (00) ARA2 65.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 7 75/22 75 22 3.0 oO 1.22 HST ARA2 75.0/22.0 (00) ARA2 75.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 8 85/25 85 25 3.2 oO 1.22 HST ARA2 85.0/25.0 (00) ARA2 85.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 9 95/25 95 25 3.6 Oo 1.22 HST ARA2 95.0/25.0 (00) ARA2 95.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 10 115/34 115 34 3.5 oO 1.22 HST ARA2 115.0/34.0 (00) ARA2 115.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 11 140/42 140 42 3.3 oO 1.22 HST ARA2 140.0/42.0 (00) | ARA2 140.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 12 160/50 160 50 3.3 oO 1.22 HST ARA2 160.0/50.0 (00) | ARA2 160.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 13 180/58 180 58 3.3 oO 1.22 HST ARA2 180.0/58.0 (00) | ARA2 180.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 14 200/65 200 65 3.3 oO 1.22 HST ARA2 205.0/65.0 (00) | ARA2 200.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 15 235/65 235 65 3.7 oO 1.22 HST ARA2 235.0/65.0 (00) ARA2 235.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 16 265/75 265 75 3.8 oO 1.22 HST ARA2 265.0/75.0 (00) | ARA2 265.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 17 300/85 300 75 3.8 oO 1.22 HST ARA2 300.0/85.0 (00) ARA2 300.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 18 350/100 350 100 4.3 oO 1.22 HST ARA2 350.0/100.0 (00) | ARA2 350.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK 19 380/150 380 150 4.3 oO 1.22 HST ARA2 380.0/110.0 (00) | ARA2 380.0MM MEDIUM WALL TUBE WITH ADHESIVE 3:1 BK Applications: Itis designed for applications to seal and protect electrical splices, cable terminations and joints where electrical insulation and water proof are required. 3: 1 shrink ratio allows it easily fit over irregular shape and large connectors. Ordering information: Standard colors: Black Special colors: N/A Packaging: Standard packaging of 1m, 1.2m, 1.5m pieces are available on request. Other: Custom lengths are available, please contact our sales department for further information.= od oY fot m0} as 7 AR2 medium wail Tubing without Hot Melting Adhesive Amphenol Features: Medium wall tubing with/without adhesive lH Good environmental protection Good electrical & mechanical performance B Ideal for LV application Technical properties: @ UV resistant Operating temp.: -55C to +110C Min. full recovery temp.: 120C MH Voltage: / Property Test Method Typical Data Property of jacket Tensile strength ASTM D 2671 214 MPa Ultimate elongation ASTM D 2671 2400% Heat aging Tensile strength ASTM D 2671(150C, 168 hrs.) 212 MPa Ultimate elongation 2300% Density ASTM D 792 1.05g/cm3 Longitudinal shrinkage UL 224 0~-12% Dielectric strength IEC60243 218 kV/mm Volume resistance IEC 93 210'130.cm Copper stability ASTM D 2671 Pass Water absorption ISO 62/23C ,14days <0.15% Property of adhesive Water absorption ISO 62 <0.2% Softening point ASTM E28 8545C Peel strength (PE) DIN 30672 4N/cm Resistance to fungus and decay ISO 846 Pass Normal size |_AS supplied(mm) After recovered(mm) Standard length Black 00 vem _ Inside diameter Inside Se Wall wicks Tube Shape (meters/roll) emphencliin Description (Min) (Max) (Min) CUSTOMER 1 8/2 8 2 1.8 oO 1.22 HST AR2 8.0/2.0 (00) AR2 8.0MM MEDIUM WALL TUBE 3:1 BK 2 12/3 12 3 1.8 oO 1.22 HST AR2 12.0/3.0 (00) AR2 12.0MM MEDIUM WALL TUBE 3:1 BK 3 16/5 16 5 2.1 oO 1.22 HST AR2 16.0/5.0 (00) AR2 16.0MM MEDIUM WALL TUBE 3:1 BK 4 22/6 22 6 2.4 oO 1.22 HST AR2 22.0/6.0 (00) AR2 22.0MM MEDIUM WALL TUBE 3:1 BK 5 28/6 28 6 2.6 oO 1.22 HST AR2 28.0/6.0 (00) AR2 28.0MM MEDIUM WALL TUBE 3:1 BK 6 33/8 33 8 2.6 oO 1.22 HST AR2 33.0/8.0 (00) AR2 33.0MM MEDIUM WALL TUBE 3:1 BK 7 40/12 40 12 2.6 oO 1.22 HST AR2 40.0/12.0 (00) AR2 33.0MM MEDIUM WALL TUBE 3:1 BK 8 55/16 55 16 2.7 oO 1.22 HST AR2 55.0/16.0 (00) AR2 55.0MM MEDIUM WALL TUBE 3:1 BK 9 65/19 65 19 2.9 Oo 1.22 HST AR2 65.0/19.0 (00) AR2 65.0MM MEDIUM WALL TUBE 3:1 BK 10 75/22 75 22 3.0 oO 1.22 HST AR2 75.0/22.0 (00) AR2 75.0MM MEDIUM WALL TUBE 3:1 BK 11 85/25 85 25 3.2 oO 1.22 HST AR2 85.0/25.0 (00) AR2 85.0MM MEDIUM WALL TUBE 3:1 BK 12 95/25 95 25 3.6 oO 1.22 HST AR2 95.0/25.0 (00) AR2 95.0MM MEDIUM WALL TUBE 3:1 BK 13 115/34 115 34 3.5 oO 1.22 HST AR2 115.0/34.0 (00) AR2 115.0MM MEDIUM WALL TUBE 3:1 BK 14 140/42 140 42 3.3 oO 1.22 HST AR2 140.0/42.0 (00) AR2 140.0MM MEDIUM WALL TUBE 3:1 BK 15 160/50 160 50 3.3 oO 1.22 HST AR2 160.0/50.0 (00) AR2 160.0MM MEDIUM WALL TUBE 3:1 BK 16 180/58 180 58 3.3 oO 1.22 HST AR2 180.0/58.0 (00) AR2 180.0MM MEDIUM WALL TUBE 3:1 BK 17 200/65 200 65 3.3 oO 1.22 HST AR2 205.0/65.0 (00) AR2 205.0MM MEDIUM WALL TUBE 3:1 BK 18 235/65 235 65 3.7 oO 1.22 HST AR2 235.0/65.0 (00) AR2 235.0MM MEDIUM WALL TUBE 3:1 BK 19 265/75 265 75 3.8 oO 1.22 HST AR2 265.0/75.0 (00) AR2 265.0MM MEDIUM WALL TUBE 3:1 BK 20 300/75 300 75 3.8 oO 1.22 HST AR2 300.0/75.0 (00) AR2 300.0MM MEDIUM WALL TUBE 3:1 BK 21 350/100 350 100 4.3 oO 1.22 HST AR2 350.0/100.0 (00) AR2 350.0MM MEDIUM WALL TUBE 3:1 BK 22 380/150 380 150 4.3 oO 1.22 HST AR2 380.0/150.0 (00) AR2 380.0MM MEDIUM WALL TUBE 3:1 BK 23 410/150 410 150 4.3 oO 1.22 HST AR2 410.0/150.0 (00) AR2 410.0MM MEDIUM WALL TUBE 3:1 BK Applications: Designed to seal and protect electrical splices, cable terminations, and joints where electrical insulation and water ingress protection are required. Has a 3:1 shrink ratio which allows the tubing to fit over irregular shaped and large connectors. Ordering information: Standard colors: Black Special colors: N/A Packaging: Standard packaging of 1m, 1.2m, 1.5m pieces are available on request. Other: Custom lengths are available, please contact our sales department for further information.= od oY fot m0} as 7 AR3 Heavy Wall Tubing Without Hot Melting Adhesive Features: Heavy wall tubing with/without adhesive Superior electrical & environmental insulation Excellent abrasion and impact resistance @ UV resistant Technical properties: Superior sealing property MH Operating temp.: -55C to +110C B Min. full recovery temp.: 120C B Voltage: / Property Test Method Typical Data Property of jacket Tensile strength ASTM D 2671 214 MPa Ultimate elongation ASTM D 2671 2400% Heat aging Tensile strength ASTM D 2671(150C, 168 hrs.) 212 MPa Ultimate elongation 2300% Density ASTM D 792 1.05g/cms Longitudinal shrinkage UL 224 0~-12% Dielectric strength IEC 60243 218 kV/mm Volume resistance IEC 93 210180.cm Copper stability ASTM D 2671 Pass Water absorption ISO 62 <0.15% Property of adhesive Water absorption ISO 62 <0.2% Softening point ASTM E28 85+5C Peel strength (PE) DIN 30672 4N/cm Resistance to fungus and decay ISO 846 Pass Amphenol Normal size |_AS supplied(mm) After recovered(mm) Standard length Black 00 vem _ Inside diameter Inside Se Wall wicks Tube Shape (meters/roll) emphencliin Description (Min) (Max) (Min) CUSTOMER 1 9/3 9 3 2.0 oO 1.22 HST AR3 9.0/3.0 (00) AR3 9.0MM HEAVY WALL TUBE 3:1 BK 2 13/4 13 4 2.4 oO 1.22 HST AR3 13.0/4.0 (00) AR3 13.0MM HEAVY WALL TUBE 3:1 BK 3 22/6 22 6 2.7 oO 1.22 HST AR3 22.0/6.0 (00) AR3 22.0MM HEAVY WALL TUBE 3:1 BK 4 33/8 33 8 3.2 oO 1.22 HST AR3 33.0/8.0 (00) AR3 33.0MM HEAVY WALL TUBE 3:1 BK 5 40/12 40 12 3.9 oO 1.22 HST AR3 40.0/12.0 (00) AR3 40.0MM HEAVY WALL TUBE 3:1 BK 6 45/12 45 12 3.9 oO 1.22 HST AR3 45.0/12.0 (00) AR3 45.0MM HEAVY WALL TUBE 3:1 BK 7 55/16 55 16 4.0 oO 1.22 HST AR3 55.0/16.0 (00) AR3 55.0MM HEAVY WALL TUBE 3:1 BK 8 65/19 65 19 4.0 oO 1.22 HST AR3 65.0/19.0 (00) AR3 65.0MM HEAVY WALL TUBE 3:1 BK 9 75/22 75 22 4.0 Oo 1.22 HST AR3 75.0/22.0 (00) AR3 75.0MM HEAVY WALL TUBE 3:1 BK 10 85/25 85 25 4.2 oO 1.22 HST AR3 85.0/25.0 (00) AR3 85.0MM HEAVY WALL TUBE 3:1 BK 11 95/29 95 29 4.2 oO 1.22 HST AR3 95.0/29.0 (00) AR3 95.0MM HEAVY WALL TUBE 3:1 BK 12 105/29 105 29 4.2 oO 1.22 HST AR3 105.0/29.0 (00) AR3 105.0MM HEAVY WALL TUBE 3:1 BK 13 115/34 115 34 4.2 oO 1.22 HST AR3 115.0/34.0 (00) AR3 115.0MM HEAVY WALL TUBE 3:1 BK 14 130/36 130 36 4.2 oO 1.22 HST AR3 130.0/36.0 (00) AR3 130.0MM HEAVY WALL TUBE 3:1 BK 15 160/50 160 50 4.2 oO 1.22 HST AR3 160.0/50.0 (00) AR3 160.0MM HEAVY WALL TUBE 3:1 BK 16 180/50 180 50 4.2 oO 1.22 HST AR3 180.0/50.0 (00) AR3 180.0MM HEAVY WALL TUBE 3:1 BK 17 200/60 200 60 4.2 oO 1.22 HST AR3 200.0/60.0 (00) AR3 200.0MM HEAVY WALL TUBE 3:1 BK 18 235/65 235 65 4.3 oO 1.22 HST AR3 235.0/65.0 (00) AR3 235.0MM HEAVY WALL TUBE 3:1 BK 19 265/75 265 75 4.6 oO 1.22 HST AR3 265.0/75.0 (00) AR3 265.0MM HEAVY WALL TUBE 3:1 BK 20 300/85 300 85 4.6 oO 1.22 HST AR3 300.0/85.0 (00) AR3 300.0MM HEAVY WALL TUBE 3:1 BK 21 350/100 350 100 4.8 oO 1.22 HST AR3 350.0/100.0 (00) AR3 350.0MM HEAVY WALL TUBE 3:1 BK 22 385/110 385 110 4.8 oO 1.22 HST AR3 385.0/110.0 (00) AR3 385.0MM HEAVY WALL TUBE 3:1 BK Applications: Designed to seal and protect electrical splices, cable terminations, and joints where electrical insulation and water ingress protection are required. Has a 3:1 shrink ratio which allows the tubing to fit over irregular shaped and large connectors. Ordering information: Standard colors: Black Special colors: N/A Packaging: Standard packaging of 1m, 1.2m, 1.5m pieces are available on request. Other: Custom lengths are available, please contact our sales department for further information.= od oY fot m0} as 7 ARAS3 Heavy Wall Tubing with Hot Melting Adhesive Features: Heavy wall tubing with/without adhesive Superior electrical & environmental insulation Excellent abrasion and impact resistance @ UV resistant Technical properties: Superior sealing property MH Operating temp.: -55C to +110C B Min. full recovery temp.: 120C BH Voltage: / Property Test Method Typical Data Property of jacket Tensile strength ASTM D 2671 214 MPa Ultimate elongation ASTM D 2671 2400% Heat aging Tensile strength ASTM D 2671(150C, 168 hrs.) 212 MPa Ultimate elongation 2300% Density ASTM D 792 1.05g/cms Longitudinal shrinkage UL 224 0~-12% Dielectric strength IEC 60243 218 kV/mm Volume resistance IEC 93 210180.cm Copper stability ASTM D 2671 Pass Water absorption ISO 62 <0.15% Property of adhesive Water absorption ISO 62 <0.2% Softening point ASTM E28 85+5C Peel strength (PE) DIN 30672 4N/cm Resistance to fungus and decay ISO 846 Pass Amphenol Normal size |_AS supplied(mm) After recovered(mm) Standard length Black 00 vem _ Inside diameter Inside Se Wall wicks Tube Shape (meters/roll) emphencliin Description (Min) (Max) (Min) CUSTOMER 1 22/6 22 6 2.7 Oo 1.22 HST ARA3 22.0/6.0 (00) ARA3 22.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 2 33/8 33 8 3.2 oO 1.22 HST ARA3 33.0/8.0 (00) ARA3 33.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 3 40/12 40 12 4.0 oO 1.22 HST ARA3 40.0/12.0 (00) ARA3 40.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 4 45/12 45 12 4.0 oO 1.22 HST ARA3 45.0/12.0 (00) ARA3 45.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 5 55/16 55 16 4.0 oO 1.22 HST ARA3 55.0/16.0 (00) ARA3 55.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 6 65/19 65 19 4.0 oO 1.22 HST ARA3 65.0/19.0 (00) ARA3 65.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 7 75/22 75 22 4.0 oO 1.22 HST ARA3 75.0/22.0 (00) ARA3 75.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 8 85/25 85 25 4.2 oO 1.22 HST ARA3 85.0/25.0 (00) ARA3 85.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 9 95/29 95 29 4.2 Oo 1.22 HST ARA3 95.0/29.0 (00) ARA3 95.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 10 105/29 105 29 4.2 oO 1.22 HST ARA3 105.0/29.0 (00) ARA3 105.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 11 115/34 115 34 4.2 oO 1.22 HST ARA3 115.0/34.0 (00) ARA3 115.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 12 140/42 140 42 4.2 oO 1.22 HST ARA3 140.0/42.0 (00) ARA3 140.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 13 160/50 160 50 4.2 oO 1.22 HST ARA3 160.0/50.0 (00) ARA3 160.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 14 180/58 180 58 4.2 oO 1.22 HST ARA3 180.0/58.0 (00) ARA3 180.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 15 200/65 200 65 4.2 oO 1.22 HST ARA3 200.0/60.0 (00) ARA3 200.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 16 235/65 235 65 4.4 oO 1.22 HST ARA3 235.0/65.0 (00) ARA3 235.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 17 265/75 265 75 4.8 oO 1.22 HST ARA3 265.0/75.0 (00) ARA3 265.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 18 300/85 300 85 4.8 oO 1.22 HST ARA3 300.0/85.0 (00) ARA3 300.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 19 350/100 350 100 4.8 oO 1.22 HST ARA3 350.0/100.0 (00) ARA3 350.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK 20 385/110 385 110 4.8 oO 1.22 HST ARA3 385.0/110.0 (00) ARA3 385.0MM HEAVY WALL TUBE WITH ADHESIVE 3:1 BK Applications: Designed to seal and protect electrical splices, cable terminations, and joints where electrical insulation and water ingress protection are required. Has a 3:1 shrink ratio which allows the tubing to fit over irregular shaped and large connectors. Ordering information: Standard colors: Black Special colors: N/A Packaging: Standard packaging of 1m, 1.2m, 1.5m pieces are available on request. Other: Custom lengths are available, please contact our sales department for further information.Amphe-Mark Sleeves Amphenol How to Order A-2F-2PF- ey Se Expanded - y Sera t Diameter Length(mm) PAM OTASS Pack Size Option Scores (D)(mm) ; StandardColor A-2F-2PF 2.4 50 Omit 09 A 250: for 250' spool 09 White A-2F-3PF 3.2 S1 04 B 1K: for 1000 Pcs/Box A-2(HF)-2PF 4.8 S2 02 c 04 Yellow A-2(HF)-3PF 6.4 $3 06 02 Red 95 06 Blue 12.7 19.1 25.4 38.1 50.8 Tube Diameter wi Single Sided Carrier Type - A Dimm) | A-2F-2PF &A-2 A-2F-3PF&A-2(HF) ' i a (HF)-2PFd (mm) -3PFd (mm) d aaa le = 2.4 1.2 0.8 fae eS 3.2 1.6 1.1 . 4.8 24 1.6 Om eS -@ Perforated Scores 6.4 3.2 21 _ | e 9.5 4.8 3.2 from1 ee a 12.7 6.4 4.2 omit none 1 Double Sided Carrier Tape - B 19.1 9.5 6.4 $1 1prescores 2 25.4 12.7 8.5 38.1 19.1 12.7 S2 2 prescores 3 50.8 25.4 16.9 $3 3 prescores 4 78 20S Double Sided Carrier Tape - C Application Equipment * Thermal Transfer Printer + Hand Operated Heating Tool * Tabletop Oven / Belt Heater *Consult Amphenol for Suggestions