600 MHz SAW Filter 80 MHz Bandwidth Part Number: SF0600BA03183S DESCRIPTION * * * 600 MHz SAW band pass filter with 80 MHz bandwidth. 5mm x 5mm LCC package. RoHS compliant. TYPICAL PERFORMANCE Horizontal: Vertical: Horizontal: Vertical: Frequency Magnitude Frequency Magnitude 45 10 MHz / div dB/div 45 1 MHz / div dB/div IDT * SAW Products * 324 Clark Street, Worcester, MA 01606, USA * Ph 1-508-852-5400 * Fax 1-508-852-8456 www.idt.com DSSF0600BA03183S Rev - 10-Jul-08 ECN 36028 Page 1 of 3 600 MHz SAW Filter 80 MHz Bandwidth Part Number: SF0600BA03183S SPECIFICATION Parameter Min Typ Max Units - 600 22 0.5 25 1 MHz dB dB p-p 1 dB Bandwidth 2 40 dB Bandwidth Absolute Delay Rejection (20 to 500MHz) Rejection (500 to 540MHz) Rejection (660 to 700MHz) 80 40 37 37 85 115 0.3 46 40 39 120 - MHz MHz s dB dB dB Rejection (700 to 1060MHz) Specified Temperature Range System Source and Load Impedance 40 25 43 85 dB C Center Frequency (Fc) Insertion Loss @ Fc Pass Band Variation 1 2 Notes: 50 1. Defined as the average of the lower and upper 3 dB frequencies. 2. All dB levels are defined relative to the insertion loss. MAXIMUM RATINGS Parameter Storage Temperature Range Operating Temperature Range Input Power Level Min -20 25 - Max 85 85 +10 Units C C dBm MATCHING CIRCUIT 5 1 Output 50 Load Single Ended Input 50 Source Single Ended 6 2 Output return Input return Notes: 1. Matching components are not required. 2. All other pins are GND. IDT * SAW Products * 324 Clark Street, Worcester, MA 01606, USA * Ph 1-508-852-5400 * Fax 1-508-852-8456 www.idt.com DSSF0600BA03183S Rev - 10-Jul-08 ECN 36028 Page 2 of 3 600 MHz SAW Filter 80 MHz Bandwidth Part Number: SF0600BA03183S PACKAGE OUTLINE Pad Configuration: 5 Input 1 Output 2, 6 Input / Output Return 3, 4, 7, 8 Ground ISO 9001 Registered All specifications are believed to be accurate and reliable. However, MNC reserves the right to make changes without notice. (c) 2007 All rights reserved. IDT * SAW Products * 324 Clark Street, Worcester, MA 01606, USA * Ph 1-508-852-5400 * Fax 1-508-852-8456 www.idt.com DSSF0600BA03183S Rev - 10-Jul-08 ECN 36028 Page 3 of 3