2015-12-23 Silicon PIN Photodiode with Daylight Blocking Filter Version 1.3 SFH 225 FA Features: * Especially suitable for applications of 880 nm * Short-switching time (typ. 20 ns) * 5 mm LED plastic package * Also available on tape and reel * The product qualification test plan is based on the guidelines of AEC-Q101-REV-C, Stress Test Qualification for Automotive Grade Discrete Semiconductors. Applications * Photointerrupters * IR remote control of hi-fi and TV sets, dimmers, remote controls of various equipment Ordering Information Type: Photocurrent Ordering Code IP [A] = 870 nm, Ee = 1 mW/cm2, VR = 5 V SFH 225 FA 2015-12-23 34 ( 25) Q62702P1051 1 Version 1.3 SFH 225 FA Maximum Ratings (TA = 25 C) Parameter Symbol Values Unit Operating and storage temperature range Top; Tstg -40 ... 100 C Reverse voltage VR 20 V Total Power dissipation Ptot 150 mW ESD withstand voltage (acc. to ANSI/ ESDA/ JEDEC JS-001 - HBM) VESD 2000 V Characteristics (TA = 25 C) Parameter Symbol Values Unit Photocurrent (VR = 5 V, Ee = 1 mW/cm2 , = 870 nm) (typ (min)) IP Wavelength of max. sensitivity (typ) S max Spectral range of sensitivity (typ) 10% Radiant sensitive area (typ) A Dimensions of radiant sensitive area (typ) LxW Half angle (typ) Dark current (VR = 10 V) (typ (max)) IR Spectral sensitivity of the chip ( = 870 nm) (typ) S typ 0.65 A/W Quantum yield of the chip ( = 870 nm) (typ) 0.93 Electro ns /Photon Open-circuit voltage (Ee = 0.5 mW/cm2, = 870 nm) (typ (min)) VO 330 ( 250) mV Short-circuit current (Ee = 0.5 mW/cm2, = 870 nm) (typ) ISC 17 A Rise and fall time (VR = 5 V, RL = 50 , = 850 nm) (typ) tr, tf 0.02 s Forward voltage (IF = 100 mA, E = 0) (typ) VF 1.3 V Capacitance (VR = 0 V, f = 1 MHz, E = 0) (typ) C0 48 pF Temperature coefficient of VO (typ) TCV 2015-12-23 2 34 ( 25) A 900 nm (typ) 740 ... 1120 nm 4.84 mm2 2.2 x 2.2 mm x mm 60 2 ( 30) -2.6 nA mV / K Version 1.3 SFH 225 FA Parameter Symbol Values Unit Temperature coefficient of ISC ( = 870 nm) (typ) TCI 0.1 %/K Noise equivalent power (VR = 10 V, = 870 nm) (typ) NEP 0.039 pW / Hz1/2 Detection limit (VR = 10 V, = 870 nm) (typ) D* 5.6e12 cm x Hz1/2 / W Relative Spectral Sensitivity 1) page 9 Srel = f() Photocurrent / Open-Circuit Voltage 1) page 9 IP (VR = 5 V) / VO = f(Ee) OHF01430 100 P Srel % 80 OHF01056 10 3 A 10 4 mV VO 10 2 10 3 70 VO 60 10 1 50 10 2 40 P 30 10 0 10 1 20 10 0 400 2015-12-23 600 800 10 -1 10 0 1000 nm 1200 10 1 10 2 W/cm 2 Ee 3 10 0 10 4 Version 1.3 SFH 225 FA Dark Current 1) page 9 IR = f(VR), E = 0 Power Consumption Ptot = f(TA) OHF00394 160 mW Ptot 140 OHF00080 4000 R 120 pA 3000 100 80 2000 60 40 1000 20 0 0 20 40 60 0 80 C 100 TA Dark Current 1) page 9 IR = f(VR), E = 0 OHF02284 nA R 10 1 10 0 0 2 4 6 8 10 12 14 16 V 20 VR 2015-12-23 5 10 Capacitance 1) page 9 C = f(VR), f = 1 MHz, E = 0 10 2 10 -1 0 4 15 V VR 20 Version 1.3 SFH 225 FA Dark Current 1) page 9 IR = f(TA), VR = 10 V, E = 0 OHF00082 10 3 R nA 10 2 10 1 10 0 10 -1 0 20 40 60 80 C 100 TA Directional Characteristics 1) page 9 Srel = f() 40 30 20 10 0 OHF01402 1.0 50 0.8 60 0.6 70 0.4 80 0.2 0 90 100 2015-12-23 1.0 0.8 0.6 0.4 0 5 20 40 60 80 100 120 Version 1.3 SFH 225 FA Package Outline 1.1 (0.043) 0.7 (0.028) 1.2 (0.047) 5.1 (0.201) 4.6 (0.181) 0.75 (0.030) 0.45 (0.018) 0.4 (0.016) 1.8 (0.071) 0.6 (0.024) 2.54 (0.100) spacing 35.5 (1.398) 33.5 (1.319) 3.8 (0.150) 7.2 (0.283) 6.6 (0.260) 3.1 (0.122) 2.6 (0.102) Cathode Photosensitive area Surface not flat GEOY6422 Dimensions in mm (inch). Package 5mm Radial (T 1 3/4), Epoxy Approximate Weight: 0.1 g Note Packing information is available on the internet (online product catalog). 2015-12-23 0.5 (0.020) 0.3 (0.012) 6 Version 1.3 SFH 225 FA Recommended Solder Pad Dimensions in mm. Note: pad 1: anode TTW Soldering IEC-61760-1 TTW OHA04645 300 10 s max., max. contact time 5 s per wave C T 250 235 C - 260 C First wave Second wave Continuous line: typical process Dotted line: process limits T < 150 K 200 Cooling Preheating ca. 3.5 K/s typical 150 ca. 2 K/s 130 C 120 C 100 C 100 ca. 5 K/s Typical 50 0 0 20 40 60 80 100 120 140 160 180 200 220 s 240 t 2015-12-23 7 Version 1.3 SFH 225 FA Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS. *) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. 2015-12-23 8 Version 1.3 SFH 225 FA Glossary 1) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 2015-12-23 9 Version 1.3 SFH 225 FA Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2015-12-23 10