VPS-280-13.5 - V-Infinity - Datasheet.Live



•

V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005 www.v-infinity.com 1-866-372-1258

VPS-280-13.5 Parallel Switching Power Supply

DC output voltage 13.5V

Output V. tolerance ±1%

Output rated current 20A

Output current range 0-20A

Ripple & noise 150mVp-p

Line regulation ±0.5%

Load regulation ±0.5%

DC output power 270W

Efficiency 80%

DC voltage adj. 12~15V

Input voltage range 90~132VAC / 180~264VAC by switching 254~370VDC

AC current 5.5A/115V 3A/230V

Inrush current cold start 35A

Leakage current <1mA/240VAC

Overload protection 105%~135%

type: foldback current limiting, auto recovery

Over voltage protection 15.53~18.23V

Over temp. protection 100ºC±5ºC(TSW) type: shutdown reset: auto recovery

Temperature coefficient ±0.03% / °C (0~50°C)

Set up, rise, hold up time 200ms, 50ms, 10ms

Vibration 10~500Hz, 2G 10min./1cycle (1 hour each axes)

Withstand voltage I/P-O/P: 1.5KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC, for 1 min

Isolation resistance I/P-O/P, I/P-FG, O/P-FG: 500VDC / 100M Ohms min

Working temp., humidity -10°C~+60% (refer to output derating curve), 20%-90% RH

Storage temp., humidity -20ºC~+85ºC, 10%~95% RH

Dimensions 5.91x5.51x3.39 inches (150x140x86 mm)

Weight 3.15 lbs (1.43 Kgs)

Safety standards UL1012

EMC standards FCC Part15 J Conduction Class B

Notes: 1. All parameters are specified at 230VAC input, rated load, 25°C 70% ambient

2. Tolerance includes set up tolerance, line regulation, load regulation

3. Ripple & noise are measured at 20MHz by using a 12” twisted pair terminated with a 0.1uF & 47 uF capacitor

4. Line regulation is measured from low line to high line at rated load

5, Load regulation is measure from 0% to 100% rated load

*V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise cus-

tomers to verify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for cus-

tomer’s applications using V-Infinity products other than repair or replacing (at V-I’s option) V-Infinity products not meeting V-I’s pub-

lished specifications. Nothing will be covered outside of standard product warranty.

Features

·AC input range selected by switch

·Protections:Short circuit/Over load/Over voltage

·Forced air cooling by built-in DC ball bearing fan

·Built-in constant current limiting circuit

·Built-in cooling Fan ON-OFF control

·Built-parallel function

·Built-in active current sharing

·LED indicator for power on

·Fixed switching frequency at 25KHz

·2 years warranty