MADRCC0006, MADR-009151-000DIE Single Driver for GaAs FET Switches and Attenuators Rev. V6 Functional Schematic Features High Speed CMOS Technology Single Channel Positive Voltage Control Low Power Dissipation Low Cost Plastic SOIC-8 Package 100% Matte Tin Plating over Copper Halogen-Free "Green" Mold Compound 260C Reflow Compatible MADRCC0006 is RoHS* Compliant Version of SWD-109 VCC Logic, C1 VOPT TTL Buffer Level Shifter VOPT VEE Description Inverter The MADRCC0006 is a single channel driver used to translate TTL control inputs into gate control voltages for GaAs FET microwave switches and attenuators. High speed analog CMOS technology is utilized to achieve low power dissipation at moderate to high speeds, encompassing most microwave switching applications. The output high level is optionally 0 to +2 V (relative to GND) to optimize the intermodulation products of the control devices at low frequencies. Output A Level Shifter Output B VEE Pin Configuration3 1 Ordering Information Pin No. Function 1 Output A 2 GND 3 VCC 4 C1, Logic Part Number Package 5 VEE MADRCC0006 SOIC-8 6 VOPT MADRCC0006TR 1000 piece reel, SOIC-8 7 GND MADR-0009151-000DIE Die2 8 Output B 1. Reference Application Note M513 for reel size information. 2. Die sales are available in waffle packs in increments of 100 pieces. 3. The bottom of the die should be isolated for part number MADR-009151-000DIE. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADRCC0006, MADR-009151-000DIE Single Driver for GaAs FET Switches and Attenuators Rev. V6 Guaranteed Operating Ranges Symbol Parameter4 Unit Min. Typ. Max. VCC Positive DC Supply Voltage V 4.5 5.0 5.5 VEE Negative DC Supply Voltage V -8.5 -5.0 -4.5 VOPT5 Optional DC Output Supply Voltage V 0 1.0 2.0 VOPT-VEE Negative Supply Voltage Range V 4.5 6.5 11.0 VCC-VEE Positive to negative Supply Range V 9.0 10.0 14.0 TA Operating Ambient temperature C -40 +25 +85 IOH DC Output Current - High mA -- -- -1.0 IOL DC Output Current - Low mA -- -- 1.0 TRISE, TFALL Maximum Input Rise or Fall Time ns -- -- 500 4. All voltages are relative to GND. 5. VOPT is grounded for most applications. To improve the intermodulation performance and the 1 dB compression point of GaAs control devices at low frequencies, VOPT can be increased to between 1 and 2 V. The nonlinear characteristics of the GaAs control devices will approximate performance at 500 MHz. It should be noted that the control current is on the GaAs MMICs will increase when positive controls are applied. 6. MACOM recommends that VCC be powered on before VEE and powered off after VEE. DC Characteristics over Guaranteed Operating Range Symbol Parameter Test Conditions Units Min. Typ. Max. VIH Input High Voltage Guaranteed High Input Voltage V 2.0 -- -- VIL Input Low Voltage Guaranteed Low Input Voltage V -- -- 0.8 VOH Output High Voltage IOH = -1 mA VEE = max. V VOPT -0.1 -- -- VOL Output Low Voltage IOL = 1 mA VEE = max. V -- -- VEE +0.1 IIN Input Leakage Current VIN = VCC or GND VEE = min. A -- .01 10 ICC Quiescent Supply Current A -- -- 100 D ICC Additional Supply Current, per TTL Input pin mA -- -- 1.0 VCC = max. VEE = min. VOPT = min. or max. VIN = VCC or GND VCC= max. VIN = VCC -2.1 V 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADRCC0006, MADR-009151-000DIE Single Driver for GaAs FET Switches and Attenuators Rev. V6 AC Characteristics Over Guaranteed Operating Range7 Symbol Parameter Unit -55 to +25C <+85C <+125C TPLH Propagation Delay ns 22 25 30 TPHL Propagation Delay ns 22 25 30 TTLH Output Rising Transition Time ns 9.0 9.0 9.0 TTHL Output Falling Transition Time ns 8.0 8.0 8.0 TSKEW Delay Skew, Output A to Output B ns 4.0 4.0 4.0 CIN Input Capacitance pF 10 10 10 CPDC Power Dissipation Capacitance 8 pF 10 10 10 CPDE Power Dissipation Capacitance8 pF 140 140 140 7. VCC = 4.5 V, VOPT - VEE = min or max, VOPT = 0 V, CL = 25 pF, TRISE, TFALL = 6 ns. These conditions represent the worst case for slow delays. 8. Total Power Dissipation is calculated by the following formula: PD = V CC 2fCPDC + (VOPT-VEE) 2fCPDE. Absolute Maximum Ratings9,10,11 Symbol Parameter Unit Min. Max. VCC Positive DC Supply Voltage V -0.5 7.0 VEE Negative DC Supply Voltage V -9.0 0.5 VOPT Optional DC Output Supply Voltage V -0.5 VCC +0.5 VOPT-VEE Output to Negative Supply Voltage Range V -0.5 11.0 VCC-VEE Positive to Negative Supply Voltage Range V -0.5 14.0 VI DC Input Voltage V -0.5 VCC +0.5 II DC Input Current mA -25 25 9. 10. 11. 12. VO DC Output Voltage V VEE -0.5 VOPT +0.5 PD12 Power Dissipation in Still Air mW -- 500 VO DC Output Current mA -25 25 TSTG Storage Temperature C -65 150 All voltages are referenced to GND. All inputs and outputs incorporate latch-up protection structures. Exceeding any one or combination of these limits may cause permanent damage to this device. MACOM does not recommend sustained operation near these survivability limits. Derate -7 mW/C from 65C to 85C. Handling Procedures Truth Table Input Outputs Please observe the following precautions to avoid damage: C1 A B Logic "0" VEE VOPT Static Sensitivity Logic "1" VOPT VEE These electronic devices are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADRCC0006, MADR-009151-000DIE Single Driver for GaAs FET Switches and Attenuators Rev. V6 Switching Waveforms Lead-Free, SOIC-8 Notes: 1. Reference JEDEC MS-012-AA for additional dimensional and tolerance information. 2. Reference M538 application note for footprint information. 3. All dimensions shown as inches/mm. Reference Application Note M538 for lead-free solder reflow recommendations. 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADRCC0006, MADR-009151-000DIE Single Driver for GaAs FET Switches and Attenuators Rev. V6 DIE Outline Drawing Pad Configuration13,14 Die Size: 1080 x 1240 m (nominal) Pad No. X (m) nominal Y (m) nominal Pad Size (m) 0 0 0 Lower left edge of die 1 138 1042 92 x 92 2 138 835.5 92 x 92 3 138 636.75 92 x 92 4 313.75 198 92 x 92 5 838.5 198 92 x 92 6 942 378 92 x 92 7 942 558 92 x 92 8 942 1042 92 x 92 9 1080 1240 Upper right edge of die 13. All X,Y dimensions are at bond pad center. 14. Die thickness is 9.5 mils. 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADRCC0006, MADR-009151-000DIE Single Driver for GaAs FET Switches and Attenuators Rev. V6 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 6 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: MACOM: MADRCC0006