ABV1
ORDERING INFORMATION
CONSTRUCTION
CONTACT ARRANGEMENT
HIGH ENVIRONMENTAL
RESISTANCE
TURQUOISE SWITCHES
ABV TYPE
VDE
10.3
33.0
15.9
Compliance with RoHS Directive
FEATURES
• Miniature size (33×15.9×10.3 mm)
• Sealed construction for use in adverse environment-Sealed construction by
epoxy resin and rubber cap greatly reduces possible miscontact due to
contaminants such as dust. Conforming to IP67* of IEC protective construction
classification
• Elastomer double molding technology, an industry first and ultrasonic swaging
technology contribute to uniform sealing in high production quantities
• UL/CSA/VDE/SEMKO approved
*Based on the protective construction classification of IED, items which satisfy the test
requirements are denoted with an IP designation.
TYPICAL APPLICATIONS
•Automotive
• Agricultural devices
• Industrial equipment
Type of
switch
ABV1:
Turquoise
switch
V type
Te r minal
2:
6:
.187 quick-connect
terminal
Wire leads
Contact
arrangement
1:
2:
3:
SPDT
SPST-NC
SPST-NO
Actuator
0:
2:
4:
5:
6:
Pin plunger
Hinge lever
Simulated roller lever
Short roller lever
Roller lever
Operating force by
pin plunger (max.)
4:
5:
0.98 N
1.96 N
Contact
0:
1:
AgNi alloy
AgNi alloy
+ Au clad
3: UL/CSA/VDE/
SEMKO
Agency standard
R: Improved
short roller
lever
Short roller
lever
Ex. ABV1 2 1 0 4 1 3 R
Remarks: 1. Standard packing: Dust protected type 50 pcs./carton, 500 pcs./case; Immersion protected type 50 pcs./case.
2. Not every combination is available. Please refer to the following table, “PRODUCT TYPES”.
Rubber cap
Ultrasonic swaging technology contribute for sealing
Epoxy resin Epoxy resin (include)
Wire leads
.187 quick-connect terminal Wire leads
1. SPDT 2. SPST-NC 3. SPST-NO
COM
NO
NC
COM
NC
COM
NO
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
ABV1
APPLICABLE CURRENT RANGE (Reference only)
PRODUCT TYPES
AgNi alloy
Contact Actuator Contact
Arrangement Operating force, Max. 187 Quick-connect terminal Wire Leads
AgNi alloy
Pin plunger
SPDT 0.98 N ABV1210403 ABV1610403
1.96 N ABV1210503 ABV1610503
SPST-NC 0.98 N ABV1220403 ABV1620403
1.96 N ABV1220503 ABV1620503
SPST-NO 0.98 N ABV1230403 ABV1630403
1.96 N ABV1230503 ABV1630503
Hinge lever
SPDT 0.59 N ABV1212403 ABV1612403
1.18 N ABV1212503 ABV1612503
SPST-NC 0.59 N ABV1222403 ABV1622403
1.18 N ABV1222503 ABV1622503
SPST-NO 0.59 N ABV1232403 ABV1632403
1.18 N ABV1232503 ABV1632503
Simulated roller lever
SPDT 0.59 N ABV1214403 ABV1614403
1.18 N ABV1214503 ABV1614503
SPST-NC 0.59 N ABV1224403 ABV1624403
1.18 N ABV1224503 ABV1624503
SPST-NO 0.59 N ABV1234403 ABV1634403
1.18 N ABV1234503 ABV1634503
Short roller lever
SPDT 1.08 N ABV1215403R ABV1615403R
2.16 N ABV1215503R ABV1615503R
SPST-NC 1.08 N ABV1225403R ABV1625403R
2.16 N ABV1225503R ABV1625503R
SPST-NO 1.08 N ABV1235403R ABV1635403R
2.16 N ABV1235503R ABV1635503R
Roller lever
SPDT 0.59 N ABV1216403 ABV1616403
1.18 N ABV1216503 ABV1616503
SPST-NC 0.59 N ABV1226403 ABV1626403
1.18 N ABV1226503 ABV1626503
SPST-NO 0.59 N ABV1236403 ABV1636403
1.18 N ABV1236503 ABV1636503
AgNi alloy
1mA
100mA
3A
5A
0
30V
125V
5V
5V
15V
15V
DC
AC
AgNi alloy + Au clad
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
ABV1
AgNi alloy + Au clad
Contact Actuator Contact
Arrangement Operating force, Max. 187 Quick-connect terminal Wire Leads
AgNi alloy
+ Au clad
Pin plunger
SPDT 0.98 N ABV1210413 ABV1610413
1.96 N ABV1210513 ABV1610513
SPST-NC 0.98 N ABV1220413 ABV1620413
1.96 N ABV1220513 ABV1620513
SPST-NO 0.98 N ABV1230413 ABV1630413
1.96 N ABV1230513 ABV1630513
Hinge lever
SPDT 0.59 N ABV1212413 ABV1612413
1.18 N ABV1212513 ABV1612513
SPST-NC 0.59 N ABV1222413 ABV1622413
1.18 N ABV1222513 ABV1622513
SPST-NO 0.59 N ABV1232413 ABV1632413
1.18 N ABV1232513 ABV1632513
Simulated roller lever
SPDT 0.59 N ABV1214413 ABV1614413
1.18 N ABV1214513 ABV1614513
SPST-NC 0.59 N ABV1224413 ABV1624413
1.18 N ABV1224513 ABV1624513
SPST-NO 0.59 N ABV1234413 ABV1634413
1.18 N ABV1234513 ABV1634513
Short roller lever
SPDT 1.08 N ABV1215413R ABV1615413R
2.16 N ABV1215513R ABV1615513R
SPST-NC 1.08 N ABV1225413R ABV1625413R
2.16 N ABV1225513R ABV1625513R
SPST-NO 1.08 N ABV1235413R ABV1635413R
2.16 N ABV1235513R ABV1635513R
Roller lever
SPDT 0.59 N ABV1216413 ABV1616413
1.18 N ABV1216513 ABV1616513
SPST-NC 0.59 N ABV1226413 ABV1626413
1.18 N ABV1226513 ABV1626513
SPST-NO 0.59 N ABV1236413 ABV1636413
1.18 N ABV1236513 ABV1636513
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
ABV1
SPECIFICATIONS
1. Contact rating
2. Characteristics
Note: *1 O.F. 0.98N type is Min 5 × 105 (at 20 com)
3. Operating characteristics
( ): Low force type
DIMENSIONS mm General tolerance: ±0.4
Type Standard rating Low-level rating
AgNi alloy + Au clad contact 3 A 250 V AC (O.F. 1.96 N)
1 A 250 V AC (O.F. 0.98 N)
5 mA 6 V DC
2 mA 12 V DC
1 mA 24 V DC
AgNi alloy 5 A 250 V AC (O.F. 1.96 N)
3 A 250 V AC (O.F. 0.98 N) —
Mechanical life (O.T.: Specified value) Min. 5x106 (at 60 cpm)
Electrical life Nominal rating (O.T.: Max.) Min. 105 (at 20 cpm)*1
Low-level rating (O.T.: Specified value) Min. 106 (at 20 cpm)
Insulation resistance Min. 100 MΩ (at 500 V DC insulation resistance meter)
Dielectric strength
Between non-continuous terminals
Between each terminal and other exposed metal parts
Between each terminal and ground
1,000 Vrms
2,000 Vrms
2,000 Vrms
Vibration resistance 10 to 55 Hz at single amplitude of 0.75 mm (Contact opening: max. 1 msec.)
Shock resistance Min. 294 m/s2 (Contact opening: Max. 1 msec.)
Contact resistance
AgNi alloy contact type
Dust protected type (IP50): Max. 50 mΩ
Immersion protected type (IP67): Max. 100 mΩ
(By voltage drop 1 A 6 to 8 V DC)
AgNi alloy + Au clad contact type
Dust protected type (IP50): Max. 50 mΩ
Immersion protected type (IP67): Max. 100 mΩ
(By voltage drop 0.1 A 6 to 8 V DC)
Allowable operating speed (at no load) 1 to 500 mm/sec.
Max. operating cycle rate (at no load) 120 cpm
Ambient temperature (at no load) −40°C to +85°C
Unit weight Approx. 7 g (IP50 type)
Type of actuator Operating force, Max. Release force, Min. Pretravel,
Max. mm
Movement
differential,
Max. mm
Overtravel,
Min. mm
Operating
position,
mm
Pin plunger 1.96N 0.98N 0.39N 0.25N 1.6 0.4 0.8 14.7±0.6
Hinge lever 1.18N 0.59N 0.13N 0.098N 3.2 1.2 1.2 15.3±1.2
Simulated roller lever 1.18N 0.59N 0.13N 0.098N 3.2 1.2 1.2 18.5±1.2
Short roller lever 2.16N 1.08N 0.39N 0.20N 1.6 0.5 0.8 20.7±0.8
Roller lever 1.18N 0.59N 0.13N 0.098N 3.2 1.2 1.2 20.7±1.2
1. Dust protected type
1-(1) .187 quick-connect terminal
Pin plunger
22.2±0.1
10.3±0.1
2.8
3.4
Operating
Position
14.7±0.6
Pretravel
1.6 max
2.8
0.5 15.9
5.2
5.2
10.3
10
2.5
4.75
20.2±0.3
33
45.5
42
3.1 dia.
+0.25
–0.05
3.1+0.25
–0.05
Pretravel,
Max. mm 1.6
Movement differential,
Max. mm 0.4
Overtravel,
Min. mm 0.8
Operating position,
mm 14.7±0.6
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
ABV1
Hinge lever mm General tolerance: ±0.25
R30.8
Operating Position
15.3±1.2
10.6
17.2
5
35.8±0.5
Pretravel
3.2 max.
Pretravel,
Max. mm 3.2
Movement differential,
Max. mm 1.2
Overtravel,
Min. mm 1.2
Operating position,
mm 15.3±1.2
Simulated roller lever
Pretravel
3.2 max.
R27.8
32.8±0.5
Operating Position
18.5±1.2
5
Pretravel,
Max. mm 3.2
Movement differential,
Max. mm 1.2
Overtravel,
Min. mm 1.2
Operating position,
mm 18.5±1.2
Short roller lever
24.6±0.5
4.9
4.8 dia.
20.6±0.5
Operating Position
20.7±0.8
R 17.2
Pretravel
1.6 max.
Pretravel,
Max. mm 1.6
Movement differential,
Max. mm 0.5
Overtravel,
Min. mm 0.8
Operating position,
mm 20.7±0.8
Roller lever
Operating Position
20.7±1.2
R30.0
Pretravel
3.2 max. 4.9
4.8 dia.
34.2±0.5
Pretravel,
Max. mm 3.2
Movement differential,
Max. mm 1.2
Overtravel,
Min. mm 1.2
Operating position,
mm 20.7±1.2
2. Immersion protected type
Wire Leads
10
10
Operating
Position
14.7±0.6
Pretravel
1.6 max.
10.3±0.1
3.4
2.8 22.2±0.1
36 300±10
15.9
20.2±0.3
3.1 dia.
+0.25
–0.05
3.1+0.25
–0.05
Thickness of the lead wire:
Standard type: 0.75mm2
UL/CSA approved type:
AWG #18
Color of the lead wire
COM ...black
N.C. ....red
N.O. ....white
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
