ABV1 VDE HIGH ENVIRONMENTAL RESISTANCE TURQUOISE SWITCHES ABV TYPE FEATURES 10.3 * Miniature size (33x15.9x10.3 mm) * Sealed construction for use in adverse environment-Sealed construction by epoxy resin and rubber cap greatly reduces possible miscontact due to contaminants such as dust. Conforming to IP67* of IEC protective construction classification * Elastomer double molding technology, an industry first and ultrasonic swaging technology contribute to uniform sealing in high production quantities * UL/CSA/VDE/SEMKO approved * Based on the protective construction classification of IED, items which satisfy the test requirements are denoted with an IP designation. 33.0 15.9 TYPICAL APPLICATIONS Compliance with RoHS Directive * Automotive * Agricultural devices * Industrial equipment ORDERING INFORMATION Ex. Type of switch ABV1: Turquoise switch V type ABV1 2 Contact arrangement 2: .187 quick-connect 1: SPDT terminal 2: SPST-NC 6: Wire leads 3: SPST-NO 1 Terminal 0 4 Actuator 0: Pin plunger 2: Hinge lever 4: Simulated roller lever 5: Short roller lever 6: Roller lever 1 3 Operating force by pin plunger (max.) 4: 0.98 N 5: 1.96 N R Contact Agency standard 0: AgNi alloy 1: AgNi alloy + Au clad 3: UL/CSA/VDE/ SEMKO Short roller lever R: Improved short roller lever Remarks: 1. Standard packing: Dust protected type 50 pcs./carton, 500 pcs./case; Immersion protected type 50 pcs./case. 2. Not every combination is available. Please refer to the following table, "PRODUCT TYPES". CONSTRUCTION .187 quick-connect terminal Wire leads Rubber cap Ultrasonic swaging technology contribute for sealing Epoxy resin Epoxy resin (include) Wire leads CONTACT ARRANGEMENT 1. SPDT 2. SPST-NC 3. SPST-NO NC NC NO NO COM COM All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. COM ABV1 APPLICABLE CURRENT RANGE (Reference only) 5A AgNi alloy 3A 100mA AgNi alloy + Au clad 1mA 0 DC 5V AC 5V 15V 15V 30V 125V PRODUCT TYPES AgNi alloy Contact Actuator Contact Arrangement SPDT Pin plunger SPST-NC SPST-NO SPDT Hinge lever SPST-NC SPST-NO SPDT AgNi alloy Simulated roller lever SPST-NC SPST-NO SPDT Short roller lever SPST-NC SPST-NO SPDT Roller lever SPST-NC SPST-NO Operating force, Max. 187 Quick-connect terminal Wire Leads 0.98 N 1.96 N 0.98 N 1.96 N 0.98 N 1.96 N 0.59 N 1.18 N 0.59 N 1.18 N 0.59 N 1.18 N 0.59 N 1.18 N 0.59 N 1.18 N 0.59 N 1.18 N 1.08 N 2.16 N 1.08 N 2.16 N 1.08 N 2.16 N 0.59 N 1.18 N 0.59 N 1.18 N 0.59 N 1.18 N ABV1210403 ABV1210503 ABV1220403 ABV1220503 ABV1230403 ABV1230503 ABV1212403 ABV1212503 ABV1222403 ABV1222503 ABV1232403 ABV1232503 ABV1214403 ABV1214503 ABV1224403 ABV1224503 ABV1234403 ABV1234503 ABV1215403R ABV1215503R ABV1225403R ABV1225503R ABV1235403R ABV1235503R ABV1216403 ABV1216503 ABV1226403 ABV1226503 ABV1236403 ABV1236503 ABV1610403 ABV1610503 ABV1620403 ABV1620503 ABV1630403 ABV1630503 ABV1612403 ABV1612503 ABV1622403 ABV1622503 ABV1632403 ABV1632503 ABV1614403 ABV1614503 ABV1624403 ABV1624503 ABV1634403 ABV1634503 ABV1615403R ABV1615503R ABV1625403R ABV1625503R ABV1635403R ABV1635503R ABV1616403 ABV1616503 ABV1626403 ABV1626503 ABV1636403 ABV1636503 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. ABV1 AgNi alloy + Au clad Contact Contact Arrangement Actuator SPDT Pin plunger SPST-NC SPST-NO SPDT Hinge lever SPST-NC SPST-NO SPDT AgNi alloy + Au clad Simulated roller lever SPST-NC SPST-NO SPDT Short roller lever SPST-NC SPST-NO SPDT Roller lever SPST-NC SPST-NO Operating force, Max. 187 Quick-connect terminal Wire Leads 0.98 N 1.96 N 0.98 N 1.96 N 0.98 N 1.96 N 0.59 N 1.18 N 0.59 N 1.18 N 0.59 N 1.18 N 0.59 N 1.18 N 0.59 N 1.18 N 0.59 N 1.18 N 1.08 N 2.16 N 1.08 N 2.16 N 1.08 N 2.16 N 0.59 N 1.18 N 0.59 N 1.18 N 0.59 N 1.18 N ABV1210413 ABV1210513 ABV1220413 ABV1220513 ABV1230413 ABV1230513 ABV1212413 ABV1212513 ABV1222413 ABV1222513 ABV1232413 ABV1232513 ABV1214413 ABV1214513 ABV1224413 ABV1224513 ABV1234413 ABV1234513 ABV1215413R ABV1215513R ABV1225413R ABV1225513R ABV1235413R ABV1235513R ABV1216413 ABV1216513 ABV1226413 ABV1226513 ABV1236413 ABV1236513 ABV1610413 ABV1610513 ABV1620413 ABV1620513 ABV1630413 ABV1630513 ABV1612413 ABV1612513 ABV1622413 ABV1622513 ABV1632413 ABV1632513 ABV1614413 ABV1614513 ABV1624413 ABV1624513 ABV1634413 ABV1634513 ABV1615413R ABV1615513R ABV1625413R ABV1625513R ABV1635413R ABV1635513R ABV1616413 ABV1616513 ABV1626413 ABV1626513 ABV1636413 ABV1636513 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. ABV1 SPECIFICATIONS 1. Contact rating Type Standard rating AgNi alloy + Au clad contact 3 A 250 V AC (O.F. 1.96 N) 1 A 250 V AC (O.F. 0.98 N) AgNi alloy 5 A 250 V AC (O.F. 1.96 N) 3 A 250 V AC (O.F. 0.98 N) Low-level rating 5 mA 6 V DC 2 mA 12 V DC 1 mA 24 V DC -- 2. Characteristics Mechanical life (O.T.: Specified value) Electrical life Min. 5x106 (at 60 cpm) Nominal rating (O.T.: Max.) Low-level rating (O.T.: Specified value) Insulation resistance Dielectric strength Between non-continuous terminals Between each terminal and other exposed metal parts Between each terminal and ground Vibration resistance Shock resistance Min. 105 (at 20 cpm)*1 Min. 106 (at 20 cpm) Min. 100 M (at 500 V DC insulation resistance meter) 1,000 Vrms 2,000 Vrms 2,000 Vrms 10 to 55 Hz at single amplitude of 0.75 mm (Contact opening: max. 1 msec.) Min. 294 m/s2 (Contact opening: Max. 1 msec.) Dust protected type (IP50): Max. 50 m Immersion protected type (IP67): Max. 100 m (By voltage drop 1 A 6 to 8 V DC) Dust protected type (IP50): Max. 50 m Immersion protected type (IP67): Max. 100 m (By voltage drop 0.1 A 6 to 8 V DC) 1 to 500 mm/sec. 120 cpm -40C to +85C Approx. 7 g (IP50 type) AgNi alloy contact type Contact resistance AgNi alloy + Au clad contact type Allowable operating speed (at no load) Max. operating cycle rate (at no load) Ambient temperature (at no load) Unit weight Note: *1 O.F. 0.98N type is Min 5 x 105 (at 20 com) 3. Operating characteristics Type of actuator Pin plunger Hinge lever Simulated roller lever Short roller lever Roller lever Operating force, Max. Release force, Min. 1.96N 1.18N 1.18N 2.16N 1.18N 0.39N 0.13N 0.13N 0.39N 0.13N 0.98N 0.59N 0.59N 1.08N 0.59N Pretravel, Max. mm 0.25N 0.098N 0.098N 0.20N 0.098N 1.6 3.2 3.2 1.6 3.2 Movement differential, Max. mm 0.4 1.2 1.2 0.5 1.2 Overtravel, Min. mm 0.8 1.2 1.2 0.8 1.2 Operating position, mm 14.70.6 15.31.2 18.51.2 20.70.8 20.71.2 ( ): Low force type mm General tolerance: 0.4 DIMENSIONS 1. Dust protected type 1-(1) .187 quick-connect terminal Pin plunger 4.75 Pretravel 1.6 max 20.20.3 3.1+0.25 -0.05 dia. Operating 2.8 Position 14.70.6 10.30.1 0.5 +0.25 -0.05 3.1 5.2 15.9 5.2 10 10.3 3.4 2.8 2.5 22.20.1 33 42 45.5 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Operating position, mm All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. 1.6 0.4 0.8 14.70.6 ABV1 mm General tolerance: 0.25 Hinge lever Pretravel 3.2 max. 35.80.5 5 R30.8 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Operating position, mm Operating Position 15.31.2 10.6 17.2 3.2 1.2 1.2 15.31.2 Simulated roller lever Pretravel 3.2 max. 5 32.80.5 R27.8 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Operating position, mm Operating Position 18.51.2 3.2 1.2 1.2 18.51.2 Short roller lever Pretravel 1.6 max. 24.60.5 20.60.5 4.9 R .2 17 4.8 dia. Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Operating position, mm Operating Position 20.70.8 1.6 0.5 0.8 20.70.8 Roller lever Pretravel 3.2 max. 4.9 34.20.5 4.8 dia. R30.0 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Operating position, mm Operating Position 20.71.2 3.2 1.2 1.2 20.71.2 2. Immersion protected type Wire Leads Pretravel 1.6 max. 20.20.3 3.1+0.25 -0.05 dia. Operating Position 14.70.6 10.30.1 3.1+0.25 -0.05 2.8 15.9 3.4 10 22.20.1 36 10 30010 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. Thickness of the lead wire: Standard type: 0.75mm2 UL/CSA approved type: AWG #18 Color of the lead wire COM ...black N.C. ....red N.O. ....white