934056238115 - NXP - Datasheet.Live

DATA SH EET

Product speciﬁcation

Supersedes data of 2000 Jun 06 2000 Dec 04

DISCRETE SEMICONDUCTORS

BGA2022

MMIC mixer

ook, halfpage

MBD128

2000 Dec 04 2

Philips Semiconductors Product speciﬁcation

MMIC mixer BGA2022

FEATURES

•Large frequency range:

– Cellular band (900 MHz)

– PCS band (1900 MHz)

– WLAN band (2.4 GHz)

•High isolation

•High linearity

•High conversion gain.

APPLICATIONS

Receiver side of wireless systems

that require high conversion gain and

high linearity at low supply current,

such as CDMA.

DESCRIPTION

Silicon double poly MMIC mixer in a

6-lead SOT363 plastic package.

PINNING

PIN DESCRIPTION

1 LO - GND

2 LO - signal

4 IF - out

5 RF - feedback

6 RF - signal

handbook, 4 columns

IF-outRF-feedbackRF-signal

456

LO-GND LO-signal

312

BIAS

CONTROL

MBL255

123

654

Top view

Fig.1 Simplified outline (SOT363) and symbol.

Marking code: A2p.

QUICK REFERENCE DATA

VS= 2.8 V; IS= 6 mA; PLO = 0 dBm; fRF = 1800 MHz; fLO = 2080 MHz; fIF = 280 MHz.

SYMBOL PARAMETER MIN. TYP. MAX. UNIT

Gconv conversion gain 468dB

NF noise ﬁgure (DSB) −12 −dB

IP3output third order intercept point −7−dBm

CAUTION

This product is supplied in anti-static packing to prevent damage caused by electrostatic discharge during transport

and handling. For further information, refer to Philips specs.: SNW-EQ-608, SNW-FQ-302A and SNW-FQ-302B.

2000 Dec 04 3

Philips Semiconductors Product speciﬁcation

MMIC mixer BGA2022

LIMITING VALUES

In accordance with the Absolute Maximum Rating System (IEC 60134).

Notes

1. LO and RF signals always AC coupled; 50 Ω source; no external DC voltage supplied to pins 1, 2 and 6.

2. Ts is the temperature at the soldering point of the ground tab.

THERMAL CHARACTERISTICS

CHARACTERISTICS

VS= 2.8 V; IS= 6 mA; Tj=25°C; unless otherwise speciﬁed.

SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT

VSsupply voltage −4V

Ssupply current −10 mA

PLO oscillator power note 1 −10 dBm

PRF RF power note 1 −10 dBm

Ptot total power dissipation Ts≤100 °C; note 2 −40 mW

Tstg storage temperature −65 +150 °C

Tjjunction temperature −150 °C

SYMBOL PARAMETER VALUE UNIT

Rth j-s thermal resistance from junction to solder point 375 K/W

SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT

ISsupply current VS=2.8V 468mA

conv(p) power conversion gain PRF =−25 dBm; PLO = 0 dBm

880 MHz −5−dB

1800MHz 468dB

1950 MHz −5−dB

2450 MHz −6−dB

NF noise ﬁgure DSB

880 MHz −9−dB

1800 MHz −12 −dB

1950 MHz −9−dB

2450 MHz −9−dB

IP3intercept point third order input output referred

880 MHz −4−dBm

1800 MHz −7−dBm

1950 MHz −7−dBm

2450 MHz −10 −dBm

VSWRLO return losses at LO port PLO = 0 dBm; f=0to3GHz −−2:1

2000 Dec 04 4

Philips Semiconductors Product speciﬁcation

MMIC mixer BGA2022

APPLICATION INFORMATION

See application note number AN00059.

List of components (see Fig.2)

COMPONENT APPLICATION BOARD

880 MHz

(IF = 80 MHz) 1800 MHz

(IF = 280 MHz) 1950 MHz

(IF = 80 MHz) 2450 MHz

(IF = 280 MHz)

R1 1.2 kΩ2.7 kΩ2.2 kΩ3.3 kΩ

R2 22 Ω22 Ω22 Ω18 Ω

C1 12 pF 1.2 pF 1.5 pF 1.0 pF

C2 390 pF 5.6 pF 1.5 nF 82 pF

C3, C4 39 pF 6.8 pF 6.8 pF 2.7 pF

C5 27 pF 2 pF 15 pF 2.2 pF

C6 100 pF 100 pF 10 pF 100 pF

C7 22 nF 22 nF 22 nF 22 nF

C8 56 pF 8.2 pF 10 pF 6.8 pF

L1 10 nH 2.7 nH 2.7 nH 1.8 nH

L2 220 nH 110 nH 150 nH 220 nH

L3 470 nH 120 nH −120 nH

handbook, full pagewidth

MGT575

IF output

BGA2022

IF-outRF-feedbackRF-signal

C2 L1 C1 C5 L3 C6

R1 L2

C3C4

456

LO-GND LO-signal 312

LO input

RF input

Vsupply

BIAS

CONTROL

Fig.2 Application diagram.

2000 Dec 04 5

Philips Semiconductors Product speciﬁcation

MMIC mixer BGA2022

handbook, halfpage

0 1000 2000 3000

400

300

100

200

−200

−150

−50

−100

MGT576

f (MHz)

RRF

(Ω)jX

(Ω)

Fig.3 RF input impedance as a function of

frequency; typical values.

ZS=Z

L=50Ω; VS= 2.8 V; PRF = 25 dBm; Tamb =25°C.

handbook, halfpage

6000 200 400 500100 300

104

103

102

MGT577

f (MHz)

ZIF

(Ω)

−jX

Fig.4 IF output impedance as a function

frequency; typical values.

ZS=Z

L=50Ω; AC coupled; no signal; Tamb =25°C.

handbook, halfpage

−20 5

−4

−2

MGT578

−15 −10 −50

(dB)

PLO (dBm)

Fig.5 Conversion gain as a function of oscillator

power; typical values.

ZS=Z

L=50Ω; VS= 2.8 V; PRF = 0 dBm; f = 1800 MHz;

Tamb =25°C.

handbook, halfpage

MGT579

1234

(mA)

VS (V)

Fig.6 Supply current as a function of the supply

voltage; typical values.

ZS=Z

L=50Ω; AC coupled; no signal; Tamb =25°C.

2000 Dec 04 6

Philips Semiconductors Product speciﬁcation

MMIC mixer BGA2022

PACKAGE OUTLINE

REFERENCES

OUTLINE

VERSION EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC EIAJ

SOT363 SC-88

wBM

pin 1

index A

detail X

vMA

0 1 2 mm

scale

132

Plastic surface mounted package; 6 leads SOT363

UNIT A1

max bpcDEe

Qywv

mm 0.1 0.30

0.20 2.2

1.8

0.25

0.10 1.35

1.15 0.65

1.3 2.2

2.0 0.2 0.10.2

DIMENSIONS (mm are the original dimensions)

0.45

0.15 0.25

0.15

1.1

0.8

97-02-28

2000 Dec 04 7

Philips Semiconductors Product speciﬁcation

MMIC mixer BGA2022

DATA SHEET STATUS

Note

1. Please consult the most recently issued data sheet before initiating or completing a design.

DATA SHEET STATUS PRODUCT

STATUS DEFINITIONS (1)

Objective speciﬁcation Development This data sheet contains the design target or goal speciﬁcations for

product development. Speciﬁcation may change in any manner without

notice.

Preliminary speciﬁcation Qualiﬁcation This data sheet contains preliminary data, and supplementary data will be

published at a later date. Philips Semiconductors reserves the right to

make changes at any time without notice in order to improve design and

supply the best possible product.

Product speciﬁcation Production This data sheet contains ﬁnal speciﬁcations. Philips Semiconductors

reserves the right to make changes at any time without notice in order to

improve design and supply the best possible product.

DEFINITIONS

Short-form specification  The data in a short-form

specification is extracted from a full data sheet with the

same type number and title. For detailed information see

the relevant data sheet or data handbook.

Limiting values definition Limiting values given are in

accordance with the Absolute Maximum Rating System

(IEC 60134). Stress above one or more of the limiting

values may cause permanent damage to the device.

These are stress ratings only and operation of the device

attheseoratany otherconditionsabove thosegivenin the

Characteristics sections of the specification is not implied.

Exposure to limiting values for extended periods may

affect device reliability.

Application information  Applications that are

described herein for any of these products are for

illustrative purposes only. Philips Semiconductors make

norepresentationorwarrantythat suchapplicationswillbe

suitable for the specified use without further testing or

modification.

DISCLAIMERS

Life support applications  These products are not

designed for use in life support appliances, devices, or

systems where malfunction of these products can

reasonably be expected to result in personal injury. Philips

Semiconductorscustomersusing orsellingtheseproducts

for use in such applications do so at their own risk and

agree to fully indemnify Philips Semiconductors for any

damages resulting from such application.

Right to make changes  Philips Semiconductors

reserves the right to make changes, without notice, in the

products, including circuits, standard cells, and/or

software, described or contained herein in order to

improve design and/or performance. Philips

Semiconductors assumes no responsibility or liability for

theuseofany ofthese products,conveys nolicenceortitle

under any patent, copyright, or mask work right to these

products,and makes norepresentationsor warranties that

these products are free from patent, copyright, or mask

work right infringement, unless otherwise specified.

All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.

The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed

without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license

under patent- or other industrial or intellectual property rights.

Internet: http://www.semiconductors.philips.com

2000 70

Philips Semiconductors – a worldwide compan y

For all other countries apply to: Philips Semiconductors,

Marketing Communications, Building BE-p, P.O. Box 218, 5600 MD EINDHOVEN,

The Netherlands, Fax. +31 40 27 24825

Argentina: see South America

Australia: 3 Figtree Drive, HOMEBUSH, NSW 2140,

Tel. +61 2 9704 8141, Fax. +61 2 9704 8139

Austria: Computerstr. 6, A-1101 WIEN, P.O. Box 213,

Tel. +43 1 60 101 1248, Fax. +43 1 60 101 1210

Belarus: Hotel Minsk Business Center, Bld. 3, r. 1211, Volodarski Str. 6,

220050 MINSK, Tel. +375 172 20 0733, Fax. +375 172 20 0773

Belgium: see The Netherlands

Brazil: see South America

Bulgaria: Philips Bulgaria Ltd., Energoproject, 15th floor,

51 James Bourchier Blvd., 1407 SOFIA,

Tel. +359 2 68 9211, Fax. +359 2 68 9102

Canada: PHILIPS SEMICONDUCTORS/COMPONENTS,

Tel. +1 800 234 7381, Fax. +1 800 943 0087

China/Hong Kong: 501 Hong Kong Industrial Technology Centre,

72 Tat Chee Avenue, Kowloon Tong, HONG KONG,

Tel. +852 2319 7888, Fax. +852 2319 7700

Colombia: see South America

Czech Republic: see Austria

Denmark: Sydhavnsgade 23, 1780 COPENHAGEN V,

Tel. +45 33 29 3333, Fax. +45 33 29 3905

Finland: Sinikalliontie 3, FIN-02630 ESPOO,

Tel. +358 9 615 800, Fax. +358 9 6158 0920

France: 51 Rue Carnot, BP317, 92156 SURESNES Cedex,

Tel. +33 1 4099 6161, Fax. +33 1 4099 6427

Germany: Hammerbrookstraße 69, D-20097 HAMBURG,

Tel. +49 40 2353 60, Fax. +49 40 2353 6300

Hungary: see Austria

India: Philips INDIA Ltd, Band Box Building, 2nd floor,

254-D, Dr. Annie Besant Road, Worli, MUMBAI 400 025,

Tel. +91 22 493 8541, Fax. +91 22 493 0966

Indonesia: PTPhilipsDevelopmentCorporation, SemiconductorsDivision,

Gedung Philips, Jl. Buncit Raya Kav.99-100, JAKARTA 12510,

Tel. +62 21 794 0040 ext. 2501, Fax. +62 21 794 0080

Ireland: Newstead, Clonskeagh, DUBLIN 14,

Tel. +353 1 7640 000, Fax. +353 1 7640 200

Israel: RAPAC Electronics, 7 Kehilat Saloniki St, PO Box 18053,

TEL AVIV 61180, Tel. +972 3 645 0444, Fax. +972 3 649 1007

Italy: PHILIPS SEMICONDUCTORS, Via Casati, 23 - 20052 MONZA (MI),

Tel. +39 039 203 6838, Fax +39 039 203 6800

Japan: Philips Bldg 13-37, Kohnan 2-chome, Minato-ku,

TOKYO 108-8507, Tel. +81 3 3740 5130, Fax. +81 3 3740 5057

Korea: Philips House, 260-199 Itaewon-dong, Yongsan-ku, SEOUL,

Tel. +82 2 709 1412, Fax. +82 2 709 1415

Malaysia: No. 76 Jalan Universiti, 46200 PETALING JAYA, SELANGOR,

Tel. +60 3 750 5214, Fax. +60 3 757 4880

Mexico: 5900 Gateway East, Suite 200, EL PASO, TEXAS 79905,

Tel. +9-5 800 234 7381, Fax +9-5 800 943 0087

Middle East: see Italy

Netherlands: Postbus 90050, 5600 PB EINDHOVEN, Bldg. VB,

Tel. +31 40 27 82785, Fax. +31 40 27 88399

New Zealand: 2 Wagener Place, C.P.O. Box 1041, AUCKLAND,

Tel. +64 9 849 4160, Fax. +64 9 849 7811

Norway: Box 1, Manglerud 0612, OSLO,

Tel. +47 22 74 8000, Fax. +47 22 74 8341

Pakistan: see Singapore

Philippines: Philips Semiconductors Philippines Inc.,

106 Valero St. Salcedo Village, P.O. Box 2108 MCC, MAKATI,

Metro MANILA, Tel. +63 2 816 6380, Fax. +63 2 817 3474

Poland: Al.Jerozolimskie 195 B, 02-222 WARSAW,

Tel. +48 22 5710 000, Fax. +48 22 5710 001

Portugal: see Spain

Romania: see Italy

Russia: Philips Russia, Ul. Usatcheva 35A, 119048 MOSCOW,

Tel. +7 095 755 6918, Fax. +7 095 755 6919

Singapore: Lorong 1, Toa Payoh, SINGAPORE 319762,

Tel. +65 350 2538, Fax. +65 251 6500

Slovakia: see Austria

Slovenia: see Italy

South Africa: S.A. PHILIPS Pty Ltd., 195-215 Main Road Martindale,

2092 JOHANNESBURG, P.O. Box 58088 Newville 2114,

Tel. +27 11 471 5401, Fax. +27 11 471 5398

South America: Al. Vicente Pinzon, 173, 6th floor,

04547-130 SÃO PAULO, SP, Brazil,

Tel. +55 11 821 2333, Fax. +55 11 821 2382

Spain: Balmes 22, 08007 BARCELONA,

Tel. +34 93 301 6312, Fax. +34 93 301 4107

Sweden: Kottbygatan 7, Akalla, S-16485 STOCKHOLM,

Tel. +46 8 5985 2000, Fax. +46 8 5985 2745

Switzerland: Allmendstrasse 140, CH-8027 ZÜRICH,

Tel. +41 1 488 2741 Fax. +41 1 488 3263

Taiwan: Philips Semiconductors, 5F, No. 96, Chien Kuo N. Rd., Sec. 1,

TAIPEI, Taiwan Tel. +886 2 2134 2451, Fax. +886 2 2134 2874

Thailand: PHILIPS ELECTRONICS (THAILAND) Ltd.,

60/14 MOO 11, Bangna Trad Road KM. 3, Bagna, BANGKOK 10260,

Tel. +66 2 361 7910, Fax. +66 2 398 3447

Turkey: Yukari Dudullu, Org. San. Blg., 2.Cad. Nr. 28 81260 Umraniye,

ISTANBUL, Tel. +90 216 522 1500, Fax. +90 216 522 1813

Ukraine: PHILIPS UKRAINE, 4 Patrice Lumumba str., Building B, Floor 7,

252042 KIEV, Tel. +380 44 264 2776, Fax. +380 44 268 0461

United Kingdom: Philips Semiconductors Ltd., 276 Bath Road, Hayes,

MIDDLESEX UB3 5BX, Tel. +44 208 730 5000, Fax. +44 208 754 8421

United States: 811 East Arques Avenue, SUNNYVALE, CA 94088-3409,

Tel. +1 800 234 7381, Fax. +1 800 943 0087

Uruguay: see South America

Vietnam: see Singapore

Yugoslavia: PHILIPS, Trg N. Pasica 5/v, 11000 BEOGRAD,

Tel. +381 11 3341 299, Fax.+381 11 3342 553

Printed in The Netherlands 613516/06/pp8 Date of release: 2000 Dec 04 Document order number: 9397 750 07287