Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide High Performance RFI Power Line Filters for Medical Equipment HT Series 6EHT3 UL Recognized CSA Certified VDE Approved 6EHT7 6EHT1 HT Series Specifications * Designed to provide significant attenuation of RFI noise in the frequency range from 10kHz to 30MHz * Size and cost-effective Maximum leakage current each Line to Ground: @ 120 VAC 60 Hz: 2 A @250 VAC 50 Hz: 5 A Hipot rating (one minute): Line to Ground: Line to Line: 2250 VDC 1450 VDC Rated Voltage (max): 250 VAC Operating Frequency: 50/60 Hz Rated Current: Ordering Information 3 to 15A Operating Ambient Temperature Range (at rated current Ir): -10C to +40C In an ambient temperature (Ta) higher than +40C the maximum operating current (Io) is calculated as follows: Io = Ir (85-Ta)/45 6 E HT 7 M Available Part Numbers Suffix M - Metric inserts (style 7 only) Omit for standard or none Input / Output Style 1 - .250 [6.3] spade terminals 3 - Wire leads 6 - Threaded bolt 7 - IEC inlet* (line side) .250 [6.3] spade terminals (load side) HT Series 3EHT1 3EHT3 3EHT7 3EHT7M 6EHT1 6EHT3 6EHT7 6EHT7M 10EHT1 10EHT3 15EHT1 15EHT6 Accessories GA400: NEMA 5-15P to IEC 60320-1 C-13 line cord Leakage current designation E - Low leakage (<0.5 mA) Current Rating 3, 6, 10 or 15A *IEC 60320-1 C14 inlet mates with C13 connector 40 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide High Performance Power Line Filters for Medical Equipment (continued) HT Series Electrical Schematics 3 & 6EHT LINE HT3 LOAD Blue Blue 1 Green/Yellow B Brown Brown LINE A D LOAD RFI Power Line Filters 10EHT C E 15EHT LINE LOAD HT6 Case Styles HT1 (3, 6, 10A) E D B E B 2.00 0.01 50.80 0.25 A C D A C HT7 & HT7M HT1 (15A) D B E D B E C A 2.00 0.01 50.80 0.25 C A 41 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide High Performance Power Line Filters for Medical Equipment (continued) HT Series Recommended Panel Cutout Case Dimensions Part No. 1.575 40.01 0.235 R 5.96 3EHT1, 6EHT1 3EHT3, 6EHT3 3EHT7 / 7M, 6EHT7 / 7M 0.910 23.1 0.157 Dia. 3.98 1.295 32.89 10EHT1 10EHT3 15EHT1 15EHT6 A B C D E Performance Data Typical Insertion Loss Common Mode / Asymmetrical (L-G) Differential Mode / Symmetrical (L-L) Measured in closed 50 Ohm system 3EHT 6EHT 10EHT 15EHT db 100 db 100 db 100 db 100 90 90 90 90 80 80 80 80 70 70 70 70 60 60 60 60 50 50 50 50 40 40 40 40 30 30 30 30 20 20 20 20 10 10 10 0 0 0 0.01 0.1 1 10 30 Frequency in MHz 0.01 0.1 1 10 30 Frequency in MHz 10 0.01 0.1 1 10 30 Frequency in MHz 0 0.01 0.1 1 10 30 Frequency in MHz Minimum Insertion Loss Common Mode / Asymmetrical (Line to Ground) Differential Mode / Symmetrical (Line to Line) 42 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com