7/30/2000
ON-BOARD DC-DC CONVERTER ENCAPSULATED MODULES
8 WATTS SINGAL & DUAL OUTPUT APS08DM-S & APS08DM-D SERIES
Advanced Power Solutions
FEATURES:
! LOW COST SINGLE & DUAL OUTPUT
! WIDE 4:1 & 2:1 INPUT RANGE
! 8W ISOLATED OUTPUT
! SIX-SIDED METAL SHIELD
SPECIFICATION
INPUT SPECIFICATION
Input Range: Wide 4:1 & 2:1 DC input range
See Ratings Chart
Input Voltage: Nominal 12/24/48 Vdc
Input Current: Various with input range and load
See Ratings Chart
Input Fuse: Use external fuse
Input Filter: Pi-Network
Undervoltage Shutdown: 8Vdc
Isolation Resistance: 1,000 Mega Ohms
Isolation Voltage: 1,500Vdc
EMI: Six-sided metal shielding
OUTPUT SPECIFICATION
Output Voltage: See Ratings Chart
Output Current: See Ratings Chart
Voltage Accuracy: Main O/P ±2.0％ typ.
Line Regulation: ±0.5％ typ.
Load Regulation: Single O/P ± 1.0％ typ.
Dual O/P ±2.0％ typ.
Noise & Ripple: Typ. 100mV for 3.3V/5.0V &
1.0% for others peak to peak
OVP: Built-in on main output
Short Circuit Protection: Power fold back,
Self-recovering
Overload Protection: About 130% of overrange
by foldback type
GENERAL SPECIFICATION
Efficiency: Typ. 84％ various with input
Switching Frequency: Fixed frequency 100KHz
Circuit Topology: 100K Hz. Forward Circuit
Transient Response: Full to 1/2 load < 200µSec.
Case: Black coated steel with non-conductive
metal base
Weight: 27.5g (0.95 Oz.)
Power Density: 10Watts. / Cubic inch
Operating Temperature: -25°C to +71°C range
–20°C to +60°C @ full load without derating
Temperature: -40°C to +105°C
Temperature Coefficient: 0.02% /°C
Cooling: Convection cooling up to +60 °C @ full load
At least 100LFM moving air is recommended for F-L
> +60°C in a confined area
Humidity: Up to 95％RH, Non-condensing
Commercial Grade only
NOTE: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified.
(2) Line Regulation measured from High to Low Lines at full load.
(3) Load Regulation measured from Full Load to 1/2 Full Load at nominal input.
(4) Correct fuse size by calculating the max. DC current drain at low Line input & Load and then adding 20-25％for the desired fuse size.
INPUT/OUTPUT & VOLTAGE/ CURRENT RATINGS CHART
SINGLE OUTPUT INPUT CURRENT
MODEL NO. INPUT
Vdc N. L. (mA) F.L. OUTPUT
VO1(Vdc) OUTPUT
VO1(A) CASE
SIZE
APS08DM-24B-S03 18.0- 36.0 46 290 3.3V 1.50A DM2C
APS08DM-24B-S05 18.0- 36.0 46 393 5.0V 1.50A DM2C
APS08DM-24B-S09 18.0- 36.0 46 420 9.0V 0.90A DM2C
APS08DM-24B-S12 18.0- 36.0 46 415
12.0V 0.67A DM2C
APS08DM-24B-S15 18.0- 36.0 46 425
15.0V 0.55A DM2C
APS08DM-24B-S24 18.0- 36.0 46 430
24.0V 0.35A DM2C
APS08DM-12D-S03 9.0- 36.0 50 580 3.3V 1.50A DM2C
APS08DM-12D-S05 9.0- 36.0 50 786 5.0V 1.50A DM2C
APS08DM-12D-S09 9.0- 36.0 50 846 9.0V 0.90A DM2C
APS08DM-12D-S12 9.0- 36.0 50 830
12.0V 0.67A DM2C
APS08DM-12D-S15 9.0- 36.0 50 850
15.0V 0.55A DM2C
APS08DM-12D-S24 9.0- 36.0 50 860
24.0V 0.35A DM2C
APS08DM-24D-S03 9.0- 36.0 50 290 3.3V 1.50A DM2C
APS08DM-24D-S05 9.0- 36.0 50 393 5.0V 1.50A DM2C
APS08DM-24D-S09 9.0- 36.0 50 420 9.0V 0.90A DM2C
APS08DM-24D-S12 9.0- 36.0 50 415
12.0V 0.67A DM2C
APS08DM-24D-S15 9.0- 36.0 50 425
15.0V 0.55A DM2C
APS08DM-24D-S24 9.0- 36.0 50 430
24.0V 0.35A DM2C
APS08DM-48D-S03 20.0- 72.0 46 145 3.3V 1.50A DM2C
APS08DM-48D-S05 20.0- 72.0 46 196 5.0V 1.50A DM2C
APS08DM-48D-S09 20.0- 72.0 46 210 9.0V 0.90A DM2C
APS08DM-48D-S12 20.0- 72.0 46 207
12.0V 0.67A DM2C
APS08DM-48D-S15 20.0- 72.0 46 212
15.0V 0.55A DM2C
APS08DM-48D-S24 20.0- 72.0 46 215
24.0V 0.35A DM2C
DUAL OUTPUT INPUT CURRENT OUTPUT(Vdc) OUTPUT(A)
MODEL NO. INPUT
Vdc N. L. (mA) F.L. +VO1 -VO2 +VO1 -VO2 CASE
SIZE
APS08DM-24B-D03 18.0- 36.0 46 300
+3.3V -3.3V 0.80A 0.80A DM2C
APS08DM-24B-D05 18.0- 36.0 46 420
+ 5.0V -5.0V 0.80A 0.80A DM2C
APS08DM-24B-D12 18.0- 36.0 46 420
+12.0V -12.0V 0.34A 0.34A DM2C
APS08DM-24B-D15 18.0- 36.0 46 420
+15.0V -15.0V 0.27A 0.27A DM2C
APS08DM-24D-D03 9.0- 36.0 50 300
+3.3V -3.3V 0.80A 0.80A DM2C
APS08DM-24D-D05 9.0- 36.0 50 420
+ 5.0V -5.0V 0.80A 0.80A DM2C
APS08DM-24D-D12 9.0- 36.0 50 420
+12.0V -12.0V 0.34A 0.34A DM2C
APS08DM-24D-D15 9.0- 36.0 50 420
+15.0V -15.0V 0.27A 0.27A DM2C
APS08DM-48D-D03 20.0- 72.0 46 150
+3.3V -3.3V 0.80A 0.80A DM2C
APS08DM-48D-D05 20.0- 72.0 46 210
+ 5.0V -5.0V 0.80A 0.80A DM2C
APS08DM-48D-D12 20.0- 72.0 46 210
+12.0V -12.0V 0.34A 0.34A DM2C
APS08DM-48D-D15 20.0- 72.0 46 210
+15.0V -15.0V 0.27A 0.27A DM2C
MECHANICAL DIMENSIONS: MM [INCHES] Weight: 27.5g (0.95 Oz.)
PIN ASSIGNMENT
PIN NO. SINGLE DUAL
PIN# 1. -INPUT -INPUT
PIN# 2. +INPUT +INPUT
PIN# 3. DC-COM -VO2
PIN# 4. NC DC-COM
PIN# 5. VO1 +VO1
CASE SIZE: DM2C
