■Subminiature 7.87 H x 9.91 W x 16 L mm
(0.31 H x 0.39 W x 0.63 L in)
■High sensitivity with pick-up coil power of
98 mW
■Surge withstand voltage meets FCC Part
68 rule and Bellcore 2.5 kV
■Packaged for automatic insertion
■Unique moving loop armature reduces
relay size, magnetic interference, and
contact bounce time
■Bifurcated crossbar contact assures high
reliability
■Minimal loss of latching capability due to
highly efficient magnetic circuit; also,
highly resistant to shock and vibration
■Sealed construction allows automatic
solder and cleaning; assures high reliabil-
ity even in adverse environments
■Terminal arrangement fits international
standard 100-mil grid
Low Signal Relay G6E
Ordering Information
Part number
Type Contact form Standard Low sensitivity
PCB SPDT G6E-134P-ST-US G6E-134PL-ST-US
To Order : Select the part number and add the desired coil voltage rating, (e.g., G6E-134P-ST-US-
DC6
).
■NON-LATCHING
Part number
Single coil latching Dual coil latching
Type Contact form Standard Low sensitivity Standard Low sensitivity
PCB SPDT G6EU-134P-ST-US — G6EK-134P-ST-US G6EK-134PL-ST-US
■LATCHING
2
G6E G6E
Specifications
■CONTACT DATA
Load Resistive load (p.f. = 1) Inductiv e load (p.f. = 0.4) (L/R = 7 ms)
Rated load 0.40 A at 125 VAC, 2 A at 30 VDC 0.20 A at 125 VAC, 1 A at 30 VDC
Contact material Ag (A u clad)
Carry current 3 A
Max. operating voltage 250 VAC, 220 VDC
Max. operating current 3 A (AC), 3 A (DC) 1.50 A (AC), 1.50 A (DC)
Max. s witching capacity 50 VA, 60 W 25 VA, 30 W
Min. permissible load 10 µA, 10 mVDC
■COIL DATA
Standard non-latching (G6E-134P-ST-US)
Coil inductance
Rated Rated Coil (ref. value) (H) Pick-up Dropout Maximum Power
voltage current resistance Armature Armature voltage voltage voltage
consumption
(VDC) (mA) (Ω)OFF ON % of rated voltage (mW)
3 66.70 45 0.08 0.06 70% max. 10% min. 190% max. Approx. 200
5 40 125 0.18 0.17 at 23°C
6 33.30 180 0.31 0.24 (73°F)
9 22.20 405 0.62 0.50 115% max.
12 16.70 720 1.20 0.99 at 70°C
24 8.30 2,880 4.70 3.90 (158°F)
48 8.30 5,760 5.35 5.12 Approx. 400
Low-sensitivity non-latching type (G6E-134PL-ST-US)
Coil inductance
Rated Rated Coil (ref. value) (H) Pick-up Dropout Maximum Power
voltage current resistance Armature Armature voltage voltage voltage
consumption
(VDC) (mA) (Ω)OFF ON % of rated voltage (mW)
3 133 22.50 0.03 0.03 70% max. 10% min. 190% max. Approx. 400
5 79.40 63 0.08 0.07 at 23°C
6 66.60 90 0.12 0.10 (73°F)
9 44.30 203 0.21 0.19 115% max.
12 33.30 260 0.45 0.42 at 70°C
24 16.70 1,440 1.77 1.65 (158°F)
Standard single coil latching type (G6EU-134P-ST-US)
Coil inductance Set Reset
Rated Rated Coil (ref. value) (H) pick-up pick-up Maximum Power
voltage current resistance Armature Armature voltage voltage voltage
consumption
(VDC) (mA) (Ω)OFF ON % of rated voltage (mW)
3 66.70 4.50 0.05 0.04 70% max. 70% min. 190% max. Approx. 200
5 40 125 0.13 0.12 at 23°C
6 33.30 180 0.19 0.17 (73°F)
9 22.20 405 0.45 0.40 130% max.
12 16.70 720 0.84 0.79 at 70°C
24 8.30 2,880 3.56 3.10 (158°F)
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C (73°F) with a tolerance of ±10%.
2. The operating characteristics are measured at a coil temperature of 23°C (73°F).
3
G6E G6E
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C (73°F) with a tolerance of ±10%.
2. The operating characteristics are measured at a coil temperature of 23°C (73°F).
■COIL DATA (continued)
Contact resistance 50 mΩ max.
Operate (set) time 5 ms max. (mean value approx. 2.90 ms, 48 VDC type, approx. 2.40 ms)
Release (reset) time 5 ms max. (mean value approx. 1.30 ms)
Bounce time Operate Approx. 3 ms (mean value 0.37 ms)
Release Approx. 3 ms (mean value 1.12 ms)
Operating Mechanical 36,000 operations/hour
frequency Electrical 1,800 operations/hour (under rated load)
Insulation resistance 1,000 MΩ min. (at 500 VDC)
Dielectric strength 1,500 VAC, 50/60 Hz for 1 minute between coil and contacts
1,000 VAC, 50/60 Hz for 1 minute between contacts of same pole
Surge withstand voltage 1,500 V 10 x 160 µs (conforms to par t 68 of FCC Rules)
2,500 V 2 x 10 µs (Bellcore Requirement)
Vibration Mechanical durability 10 to 55 Hz; 5 mm (0.20 in) double amplitude
Malfunction durability 10 to 55 Hz; 3.3 mm (0.13 in) double amplitude
Shock Mechanical durability 1,000 m/s2 (approx. 100 G)
Malfunction durability 300 m/s2 (approx. 30 G)
Ambient temperature -40 to 70°C (-40° to 158°F)
Humidity 45% to 85% RH
Ser vice life Mechanical 1 million operations min. (at 36,000 operations/hour)
Electrical See “Characteristic Data”
Weight Approx. 2.7 g (0.10 oz)
Note: Data shown are of initial value.
■CHARACTERISTICS
Standard dual coil latching type (G6EK-134P-ST-US)
Coil inductance Set Reset
Rated Rated Coil (ref. value) (H) pick-up pick-up Maximum Power
voltage current resistance Armature Armature voltage voltage voltage
consumption
(VDC) (mA) (Ω)OFF ON % of rated voltage (mW)
3 66.70 45 0.03 0.03 70% max. 70% min. 190% max. Approx. 200
5 40 125 0.09 0.08 at 23°C
6 33.30 180 0.12 0.11 (73°F)
7 22.20 405 0.25 0.22 130% max.
12 16.70 720 0.44 0.41 at 70°C
24 8.30 2,880 1.66 1.62 (158°F)
Low-sensitivity dual coil latching type (G6EK-134PL-ST-US)
Coil inductance Set Reset
Rated Rated Coil (ref. value) (H) pick-up pick-up Maximum Power
voltage current resistance Armature Armature voltage voltage voltage
consumption
(VDC) (mA) (Ω)OFF ON % of rated voltage (mW)
3 133 22.50 0.02 0.01 70% max. 70% min. 170% max. Approx. 400
5 79.40 63 0.04 0.03 at 23°C
6 66.60 90 0.06 0.04 (73°F)
9 44.30 203 0.12 0.09 115% max.
12 33.30 360 0.21 0.15 at 70°C
24 16.70 1,440 0.80 0.58 (158°F)
4
G6E G6E
■CHARACTERISTIC DATA
Maximum switching capacity Electrical service life
Maximum voltage (%)
Ambient temperature (°C)
Rated operating current (A)
Rated operating voltage (V)
Ambient temperature vs.
maximum voltage (reference only)
Service life (x105 operations)
Rated operating current (A)
Dimensions
Unit: mm (inch)
G6E-134P-ST-US, G6E-134PL-ST-US Terminal arrangement/ Mounting holes
Internal connections [Bottom view, tolerance: ±.10 (0.004)]
(Bottom view)
■NON-LATCHING
G6E-134P
G6EU-134P
G6EK-134P
G6EU-134P-ST-US Terminal arrangement/ Mounting holes
Internal connections (Bottom view)
(Bottom view)
■LATCHING
Note: 1. and indicate mounting orientation marks.
2. Pay attention to the polarity of the coil.
123456
1
2345
6
123456
G6E-134P
G6EK-134PL
48 VDC only
5
G6E G6E
G6EK-134P-ST-US, G6EK-134PL-ST-US Terminal arrangement/ Mounting holes
Internal connections (Bottom view)
(Bottom view)
Note: 1. and indicate mounting orientation marks.
2. Pay attention to the polarity of the coil.
12345
1
234
5
12345
Type Contact form Coil ratings Contact ratings
G6E-134P-ST-US SPDT 1.5 to 48 VDC 0.2 A, 250 VAC (General purpose)
G6E-134PL-ST-US 0.6 A, 125 VAC (General purpose)
G6EU-134P-ST-US 2 A, 30 VDC (Resistive)
G6EK-134P-ST-US 0.6 A, 125 VDC (Resistive)
G6EK-134PL-ST-US
■APPROVALS
UL (File No. E41515)/CSA (File No. LR31928)
Note: 1. The rated values approved by each of the safety standards (e.g., UL, CSA, TUV) may be different from the performance
characteristics individually defined in this catalog.
2. In the interest of product improvement, specifications are subject to change.
Notes:
1. Give adequate consideration to the circuit constant when
actually using this circuit, confirming the set and reset
status of the relay.
2. OMRON owns the patent on this circuit. Consult OMRON
when using this circuit.
Hints on Correct Use
Avoid ultrasonic cleaning at 28 kHz, 13 mW/cm3 for a period of
more than 30 seconds.
Single-winding type (G6EU)
Example of low-power consumption driver circuit
1. This is an example of a driver circuit that allows Model G6E
to function as a normal relay with a normal switching pulse
input.
2. The relay is set by an abrupt current charged to capacity C.
This current flows in the relay via diode D1 and C and out
via diode D2.
3. The relay is reset by the discharge current of C flowing in
the relay via transistor TR and C.
6
G6E G6E
OMRON ELECTRONICS, INC. OMRON CANADA, INC.
One East Commerce Drive 885 Milner Avenue
Schaumburg, IL 60173 Scarborough, Ontario M1B 5V8
1-800-55-OMRON 416-286-6465
Cat. No. GC RLY6 9/97 Specifications subject to change without notice. Printed in the U.S.A.
