Doc No. TT4-EA-11778 Revision. 3 Product Standards Zener Diode DZ2S0470L DZ2S0470L Silicon epitaxial planar type Unit: mm For constant voltage / For surge absorption circuit DZ2J047 in SSMini2 type package 0.8 0.13 2 Features 1.2 1.6 Excellent rising characteristics of zener current Iz Low zener operating resistance Rz Halogen-free / RoHS compliant (EU RoHS / UL-94 V-0 / MSL:Level 1 compliant) 1 Marking Symbol: AJ or AU 0.3 0.6 Packaging Embossed type (Thermo-compression sealing) : 3 000 pcs / reel (standard) Absolute Maximum Ratings Ta = 25 C Parameter Symbol Repetitive peak forward current Total power dissipation *1 Electrostatic discharge *2 Junction temperature Operating ambient temperature Storage temperature Note) IFRM PT ESD Tj Topr Tstg Rating Unit 200 150 15 150 -40 to +85 -55 to +150 mA mW kV C C C 1. Cathode 2. Anode Panasonic JEITA Code SSMini2-F5-B SC-79 SOD-523 Internal Connection 2 *1 Mounted on glass epoxy print board ( 45 mm 45 mm 1 mm ) Solder in ( 0.8 mm 0.6 mm ) *2 Test method : IEC61000_4_2 ( C = 150 pF, R = 330 , Contact discharge : 10 times ) 1 Electrical Characteristics Ta = 25 C 3 C Parameter Symbol Forward voltage Zener voltage *1, *2 Zener operating resistance Zener rise operating resistance Reverse current Temperature coefficient of zener voltage Note) *3 VF VZ RZ RZK IR SZ Conditions Min IF = 10 mA IZ = 5 mA IZ = 5 mA IZ = 1 mA VR = 1 V IZ = 5 mA Typ 4.47 0.5 Max Unit 1.0 4.94 80 800 2.0 V V A mV/C 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 Measuring methods for Diodes. 2. Absolute frequency of input and output is 5 MHz. 3. *1 The temperature must be controlled 25 C for VZ mesurement. VZ value measured at other temperature must be adjusted to VZ (25 C). *2 VZ guaranted 20 ms after current flow Rank classification *3 Tj = 25 C to 150 C Code M 0 Rank VZ Marking symbol 4.59 M to 4.83 AU No-rank 4.47 to 4.94 AJ Page 1 of 4 Established : 2009-11-09 Revised : 2013-07-22 Doc No. TT4-EA-11778 Revision. 3 Product Standards Zener Diode DZ2S0470L Technical Data ( reference ) 200 IF - VF 1.E+00 Mounted on glass epoxy print board. Board size : 45 mm x 45 mm x 1 mm Solder in : 0.8 mm x 0.6 mm 150 Forward current IF (A) Total power dissipation PT (mW) PT - Ta 100 50 20 40 60 Ta = 25 C 1.E-02 1.E-03 1.E-04 1.E-05 1.E-06 0.0 0 0 1.E-01 80 100 120 140 160 180 200 0.2 0.8 1.0 1.2 1.E-05 1.E-01 Ta = 25 C 1.E-06 1.E-02 Reverse current IR (A) Zener current IZ (A) 0.6 IR - VR IZ - VZ 1.E-03 Ta = 125 C 1.E-04 85 C 25 C 1.E-05 1.E-07 1.E-08 1.E-09 1.E-10 1.E-11 -40 C 1.E-06 1.E-12 0 2 4 6 8 10 0 0.2 Zener voltage VZ (V) 0.6 0.8 1 8 10 SZ - IZ RZ - IZ 5 Temparature coefficient of zener voltage SZ (mV/C) Ta = 25 C 100 10 1 0.0001 0.4 Reverse voltage VR (V) 1000 Zener operating resistance RZ ) 0.4 Forward voltage VF (V) Ambient temperature Ta (C) 3 1 -1 -3 -5 0.001 0.01 Zener current IZ (A) 0.1 0 2 4 6 Zener current IZ (mA) Page 2 of 4 Established : 2009-11-09 Revised : 2013-07-22 Doc No. TT4-EA-11778 Revision. 3 Product Standards Zener Diode DZ2S0470L Technical Data ( reference ) Rth - t Ct - VR 1000 Ta = 25 C f = 1 MHz 70 60 Thermal resistance Rth (C/W) Terminal capacitance Ct (pF) 80 50 40 30 20 10 0 0 1 2 Reverse voltage VR (V) 3 (1) Rth(j-l) = 80 C/W (2) 100 10 1 0.001 (1) Non-heat sink (2) Mounted on glass epoxy print board. Board size : 45 mm x 45 mm x 1 mm Solder in : 0.8 mm x 0.6 mm 0.01 0.1 1 10 Time t (s) 100 1000 PZSM - tw Non-repetitive reverse surge power dissipation PZSM (W) 100 Ta = 25 C 10 1 0.1 100 1000 10000 Pulse width tw (s) Page 3 of 4 Established : 2009-11-09 Revised : 2013-07-22 Doc No. TT4-EA-11778 Revision. 3 Product Standards Zener Diode DZ2S0470L SSMini2-F5-B Unit: mm +0.05 +0.05 0.80-0.03 0.13-0.02 (5) +0.05 1.20-0.03 1.600.05 2 0.300.05 0.200.05 1 0 to 0.05 (0.15) +0.05 0.60-0.03 (5) Land Pattern (Reference) (Unit: mm) 0.6 1.7 0.6 0.8 Page 4 of 4 Established : 2009-11-09 Revised : 2013-07-22 Request for your special attention and precautions in using the technical information and semiconductors described in this book (1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) The technical information described in this book is intended only to show the main characteristics and application circuit examples of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) The products described in this book are intended to be used for general applications (such as office equipment, communications equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book. Consult our sales staff in advance for information on the following applications: - Special applications (such as for airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. It is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with your using the products described in this book for any special application, unless our company agrees to your using the products in this book for any special application. (4) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company. 20100202 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Panasonic: DZ2S04700L DZ2S047M0L