ZMY3V9 to ZMY100 www.vishay.com Vishay Semiconductors Zener Diodes FEATURES * Silicon planar power Zener diodes * For use in stablilizing and clipping circuits with high power rating * The Zener voltages are graded according to the international E 24 standard. Smaller voltage tolerances are available upon request DESIGN SUPPORT TOOLS * These diodes are also available in the DO-41 case with the type designation ZPY3V9 to ZPY100 click logo to get started * AEC-Q101 qualified Models * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Available PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT VZ range nom. 3.9 to 100 V Test current IZT 5 to 100 mA VZ specification Pulse current Circuit configuration Single ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY ZMY3V9 to ZMY100 ZMY3V9 to ZMY100-series-GS18 5 000 (12 mm tape on 13" reel) 10 000/box ZMY3V9 to ZMY100 ZMY3V9 to ZMY100-series-GS08 1 500 (12 mm tape on 7" reel) 12 000/box PACKAGE PACKAGE NAME MELF DO-213AB (glass) WEIGHT 135 mg MOLDING COMPOUND MOISTURE SENSITIVITY FLAMMABILITY RATING LEVEL UL 94 V-0 SOLDERING CONDITIONS MSL level 1 (according J-STD-020) 260 C/10 s at terminals ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER Power dissipation Zener current Junction to ambient air Junction to ambient case Junction temperature, maximum Storage temperature range TEST CONDITION SYMBOL VALUE UNIT Valid provided that electrodes are kept at ambient temperature Ptot 1000 mW RthJA 170 K/W RthJC 60 K/W Tj 175 C Tstg -55 to +175 C See table "Characteristics" Valid provided that electrodes are kept at ambient temperature Rev. 1.9, 16-Feb-18 Document Number: 85788 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ZMY3V9 to ZMY100 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) ZENER VOLTAGE RANGE (2) TEST CURRENT REVERSE VOLTAGE DYNAMIC RESISTANCE f = 1 kHz ADMISSIBLE ZENER CURRENT (1) TEMPERATURE COEFFICIENT OF ZENER VOLTAGE VZ at IZT1 IZT1 VR at IR ZZ at IZT1 IZ VZ at IZT1 V mA V A mA 10-4/C MIN. NOM. MAX. 3.9 3.7 4.1 4.3 4 4.6 MAX. TYP. MIN. MAX. 100 - 0.5 7 4 203 -7 2 100 - 0.5 7 4 182 -7 3 PART NUMBER ZMY3V9 ZMY4V3 ZMY4V7 4.4 4.7 5 100 - 0.5 7 4 165 -7 4 ZMY5V1 4.8 5.1 5.4 100 0.7 0.5 5 2 150 -6 5 ZMY5V6 5.2 5.6 6 100 1.5 0.5 2 1 135 -3 5 ZMY6V2 5.8 6.2 6.6 100 2 0.5 2 1 128 -1 6 ZMY6V8 6.4 6.8 7.2 100 3 0.5 2 1 110 0 7 ZMY7V5 7 7.5 7.9 100 5 0.5 2 1 100 0 7 ZMY8V2 7.7 8.2 8.7 100 6 0.5 2 1 89 3 8 ZMY9V1 8.5 9.1 9.6 50 7 0.5 4 2 82 3 8 ZMY10 9.4 10 10.6 50 7.5 0.5 4 2 74 5 9 ZMY11 10.4 11 11.6 50 8.5 0.5 7 3 66 5 10 ZMY12 11.4 12 12.7 50 9 0.5 7 3 60 5 10 ZMY13 12.4 13 14.1 50 10 0.5 9 4 55 5 10 ZMY15 13.8 15 15.8 50 11 0.5 9 4 49 5 10 ZMY16 15.3 16 17.1 25 12 0.5 10 5 44 7 11 ZMY18 16.8 18 19.1 25 14 0.5 11 5 40 7 11 ZMY20 18.8 20 21.2 25 15 0.5 12 6 36 7 11 ZMY22 20.8 22 23.3 25 17 0.5 13 7 34 7 11 ZMY24 22.8 24 25.6 25 18 0.5 14 8 29 7 12 ZMY27 25.1 27 28.9 25 20 0.5 15 9 27 7 12 ZMY30 28 30 32 25 22.5 0.5 20 10 25 7 12 ZMY33 31 33 35 25 25 0.5 20 11 22 7 12 ZMY36 34 36 38 10 27 0.5 60 25 20 7 12 ZMY39 37 39 41 10 29 0.5 60 30 18 8 12 ZMY43 40 43 46 10 32 0.5 80 35 17 8 13 ZMY47 44 47 50 10 35 0.5 80 40 15 8 13 ZMY51 48 51 54 10 38 0.5 100 45 14 8 13 ZMY56 52 56 60 10 42 0.5 100 50 13 8 13 ZMY62 58 62 66 10 47 0.5 130 60 11 8 13 ZMY68 64 68 72 10 51 0.5 130 65 10 8 13 ZMY75 70 75 79 10 56 0.5 160 70 9 8 13 ZMY82 77 82 88 10 61 0.5 160 80 8 8 13 ZMY91 85 91 96 5 68 0.5 250 120 7.5 9 13 ZMY100 94 100 106 5 75 0.5 250 130 7 9 13 Notes (1) Valid provided that electrodes are kept at ambient temperature (2) Tested with pulses t = 5 ms p Rev. 1.9, 16-Feb-18 Document Number: 85788 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ZMY3V9 to ZMY100 www.vishay.com Vishay Semiconductors BASIC CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 103 W 1.0 ZMY... 5 4 3 2 rzj 5 4 3 2 0.8 Ptot 102 ZMY5.1 ZMY... ZMY4.3 0.6 ZMY18 ZMY12 0.4 10 5 4 3 2 0.2 ZMY6.2 ZMY7.5 ZMY10 1 1 2 3 4 5 7 10 3 4 5 2 18312 7 0 100 mA 0 Fig. 1 - Dynamic Resistance vs. Zener Current 100 Tamb Fig. 4 - Admissible Power Dissipation vs. Ambient Temperature C/W 103 ZMY... rthA 102 2 ZMY43 5 4 3 2 ZMY36 10 ZMY30 ZMY24 7 5 4 3 10 ZMY22 5 4 3 2 ZMY18 2 1 2 10 3 4 5 3 4 5 2 0.2 0.1 0.05 0.01 10-4 10-3 10-2 10-1 5 4 IZ 2 ZMY100 ZMY82 ZMY68 ZMY56 ZMY43 10 s tP Tj = 25 C ZMY3.9 ZMY4.7 200 3 5 4 3 1 ZMY... 240 7 PI T V=0 mA ZMY... 102 t T P ___ Fig. 5 - Pulse Thermal Resistance vs. Pulse Duration 7 ZMY5.6 ZMY6.8 160 ZMY8.2 Test Current lZ 120 100 mA ZMY10 ZMY12 80 50 mA 40 2 10 0.1 v= 18286 Fig. 2 - Dynamic Resistance vs. Zener Current 103 tP 0.02 10-5 100 mA IZ 18313 18314 0.5 1 1 rzj ZMY... 5 4 3 2 7 5 4 3 rzj 200 C 100 19969 IZ 0 2 3 4 5 1 3 4 5 2 10 mA IZ Fig. 3 - Dynamic Resistance vs. Zener Current 0 18309 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 V VZ Fig. 6 - Breakdown Characteristics Rev. 1.9, 16-Feb-18 Document Number: 85788 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ZMY3V9 to ZMY100 www.vishay.com Vishay Semiconductors mA ZMY15 ZMY18 Tj = 25 C ZMY... Tj = 25 C ZMY56 ZMY22 50 IZ mA 20 ZMY... 60 IZ ZMY27 40 Test Current lZ 25 mA 30 ZMY68 Test Current lZ 10 mA ZMY33 ZMY39 ZMY82 ZMY100 10 ZMY47 20 5 mA 10 mA 10 0 0 0 5 10 15 20 25 30 40 35 50 18311 VZ 18310 0 45 50 V 100 150 200 V VZ Fig. 7 - Breakdown Characteristics Fig. 8 - Breakdown Characteristics PACKAGE DIMENSIONS in millimeters (inches): MELF DO-213AB (glass) 2.6 (0.102) 2.4 (0.094) Cathode identification 0.55 (0.022) 5.2 (0.205) 4.8 (0.189) The gap between plug and glass can be either on cathode or anode side Foot print recommendation: 4.00 (0.157) max. 3.00 (0.118) min. min. 1.25 (0.049) 6.50 (0.256) 18317 ref. Rev. 1.9, 16-Feb-18 Document Number: 85788 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: ZMY10-GS08 ZMY100-GS08 ZMY11-GS08 ZMY12-GS08 ZMY13-GS08 ZMY15-GS08 ZMY16-GS08 ZMY18GS08 ZMY20-GS08 ZMY22-GS08 ZMY24-GS08 ZMY27-GS08 ZMY3V9-GS08 ZMY30-GS08 ZMY33-GS08 ZMY36-GS08 ZMY39-GS08 ZMY4V3-GS08 ZMY4V7-GS08 ZMY43-GS08 ZMY47-GS08 ZMY5V1-GS08 ZMY5V6GS08 ZMY51-GS08 ZMY56-GS08 ZMY6V2-GS08 ZMY6V8-GS08 ZMY62-GS08 ZMY68-GS08 ZMY7V5-GS08 ZMY75-GS08 ZMY8V2-GS08 ZMY82-GS08 ZMY9V1-GS08 ZMY91-GS08 ZMY10-GS18 ZMY100-GS18 ZMY11GS18 ZMY12-GS18 ZMY13-GS18 ZMY15-GS18 ZMY16-GS18 ZMY18-GS18 ZMY20-GS18 ZMY22-GS18 ZMY24-GS18 ZMY27-GS18 ZMY3V9-GS18 ZMY30-GS18 ZMY33-GS18 ZMY36-GS18 ZMY39-GS18 ZMY4V3GS18 ZMY4V7-GS18 ZMY43-GS18 ZMY47-GS18 ZMY5V1-GS18 ZMY5V6-GS18 ZMY51-GS18 ZMY56-GS18 ZMY6V2-GS18 ZMY6V8-GS18 ZMY62-GS18 ZMY68-GS18 ZMY7V5-GS18 ZMY75-GS18 ZMY8V2-GS18 ZMY82GS18 ZMY9V1-GS18 ZMY91-GS18