ZMY3V9 to ZMY100
www.vishay.com Vishay Semiconductors
Rev. 1.9, 16-Feb-18 1Document Number: 85788
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Zener Diodes
DESIGN SUPPORT TOOLS
FEATURES
• Silicon planar power Zener diodes
• For use in stablilizing and clipping circuits with
high power rating
• The Zener voltages are graded according to the
international E 24 standard. Smaller voltage
tolerances are available upon request
• These diodes are also available in the DO-41
case with the type designation ZPY3V9 to ZPY100
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
PARAMETER VALUE UNIT
VZ range nom. 3.9 to 100 V
Test current IZT 5 to 100 mA
VZ specification Pulse current
Circuit configuration Single
click logo to get started
Available
Models
ORDERING INFORMATION
DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY
ZMY3V9 to ZMY100 ZMY3V9 to ZMY100-series-GS18 5 000 (12 mm tape on 13" reel) 10 000/box
ZMY3V9 to ZMY100 ZMY3V9 to ZMY100-series-GS08 1 500 (12 mm tape on 7" reel) 12 000/box
PACKAGE
PACKAGE NAME WEIGHT MOLDING COMPOUND
FLAMMABILITY RATING
MOISTURE SENSITIVITY
LEVEL
SOLDERING
CONDITIONS
MELF DO-213AB (glass) 135 mg UL 94 V-0 MSL level 1
(according J-STD-020) 260 °C/10 s at terminals
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Power dissipation Valid provided that electrodes are kept at
ambient temperature Ptot 1000 mW
Zener current See table “Characteristics”
Junction to ambient air Valid provided that electrodes are kept at
ambient temperature RthJA 170 K/W
Junction to ambient case RthJC 60 K/W
Junction temperature, maximum Tj175 °C
Storage temperature range Tstg -55 to +175 °C
ZMY3V9 to ZMY100
www.vishay.com Vishay Semiconductors
Rev. 1.9, 16-Feb-18 2Document Number: 85788
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) Valid provided that electrodes are kept at ambient temperature
(2) Tested with pulses tp = 5 ms
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PART NUMBER
ZENER VOLTAGE
RANGE (2)
TEST
CURRENT
REVERSE
VOLTAGE
DYNAMIC
RESISTANCE
f = 1 kHz
ADMISSIBLE
ZENER
CURRENT (1)
TEMPERATURE
COEFFICIENT OF
ZENER VOLTAGE
VZ at IZT1 IZT1 VR at IRZZ at IZT1 IZ VZ at IZT1
VmA VμA mA 10-4/°C
MIN. NOM. MAX. MAX. TYP. MIN. MAX.
ZMY3V9 3.7 3.9 4.1 100 -0.5 74 203 - 7 2
ZMY4V3 4 4.3 4.6 100 -0.5 74 182 - 7 3
ZMY4V7 4.4 4.7 5100 -0.5 74 165 - 7 4
ZMY5V1 4.8 5.1 5.4 100 0.7 0.5 52 150 - 6 5
ZMY5V6 5.2 5.6 6100 1.5 0.5 21 135 - 3 5
ZMY6V2 5.8 6.2 6.6 100 20.5 21 128 - 1 6
ZMY6V8 6.4 6.8 7.2 100 30.5 21 110 0 7
ZMY7V5 7 7.5 7.9 100 50.5 21 100 0 7
ZMY8V2 7.7 8.2 8.7 100 60.5 21 89 3 8
ZMY9V1 8.5 9.1 9.6 50 70.5 42 82 3 8
ZMY10 9.4 10 10.6 50 7.5 0.5 42 74 5 9
ZMY11 10.4 11 11.6 50 8.5 0.5 73 66 5 10
ZMY12 11.4 12 12.7 50 90.5 73 60 5 10
ZMY13 12.4 13 14.1 50 10 0.5 94 55 5 10
ZMY15 13.8 15 15.8 50 11 0.5 94 49 5 10
ZMY16 15.3 16 17.1 25 12 0.5 10 5 44 7 11
ZMY18 16.8 18 19.1 25 14 0.5 11 5 40 7 11
ZMY20 18.8 20 21.2 25 15 0.5 12 6 36 7 11
ZMY22 20.8 22 23.3 25 17 0.5 13 7 34 7 11
ZMY24 22.8 24 25.6 25 18 0.5 14 8 29 7 12
ZMY27 25.1 27 28.9 25 20 0.5 15 9 27 7 12
ZMY30 28 30 32 25 22.5 0.5 20 10 25 7 12
ZMY33 31 33 35 25 25 0.5 20 11 22 7 12
ZMY36 34 36 38 10 27 0.5 60 25 20 7 12
ZMY39 37 39 41 10 29 0.5 60 30 18 8 12
ZMY43 40 43 46 10 32 0.5 80 35 17 8 13
ZMY47 44 47 50 10 35 0.5 80 40 15 8 13
ZMY51 48 51 54 10 38 0.5 100 45 14 8 13
ZMY56 52 56 60 10 42 0.5 100 50 13 8 13
ZMY62 58 62 66 10 47 0.5 130 60 11 8 13
ZMY68 64 68 72 10 51 0.5 130 65 10 8 13
ZMY75 70 75 79 10 56 0.5 160 70 9 8 13
ZMY82 77 82 88 10 61 0.5 160 80 8 8 13
ZMY91 85 91 96 568 0.5 250 120 7.5 9 13
ZMY100 94 100 106 575 0.5 250 130 7 9 13
ZMY3V9 to ZMY100
www.vishay.com Vishay Semiconductors
Rev. 1.9, 16-Feb-18 3Document Number: 85788
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Fig. 1 - Dynamic Resistance vs. Zener Current
Fig. 2 - Dynamic Resistance vs. Zener Current
Fig. 3 - Dynamic Resistance vs. Zener Current
Fig. 4 - Admissible Power Dissipation vs. Ambient Temperature
Fig. 5 - Pulse Thermal Resistance vs. Pulse Duration
Fig. 6 - Breakdown Characteristics
1
2
10 100
mA
10
3
10
2
1
Ω
r
zj
I
Z
18312
54
3254
3
2
5
4
3
2
5
4
3
2
5
4
3
10
77
ZMY5.1
ZMY4.3
ZMY18
ZMY12
ZMY7.5
ZMY6.2
ZMY10
ZMY...
1
210 100 mA
100
10
1
Ω
2
5
4
3
rzj
IZ
18313
54
3254
3
7
2
5
4
3
7
ZMY43
ZMY36
ZMY30
ZMY24
ZMY22
ZMY...
ZMY18
ZMY...
0.1
2
110
mA
10
3
10
2
10
Ω
2
5
4
3
r
zj
I
Z
18314
54
3254
3
7
2
5
4
3
7
ZMY100
ZMY82
ZMY68
ZMY56
ZMY43
0100
200 °C
0.8
0.4
0
W
P
tot
T
amb
19969
ZMY...
1.0
0.6
0.2
10
-5
10
-4
10
-3
10
-2
10
-1
110
s
10
3
10
2
10
1
°C/W
2
5
4
3
2
5
4
3
2
5
4
3
r
thA
t
P
18286
tP
v =
T
PI
___
T
tP
0.5
0.2
0.1
0.05
0.02
0.01
ZMY...
V = 0
012345678 9 1011 12131415 V
0
40
80
120
160
200
240
mA
I
Z
V
Z
18309
ZMY...
Tj = 25 °C
Test Current lZ
100 mA
50 mA
ZMY4.7
ZMY3.9
ZMY5.6
ZMY6.8
ZMY8.2
ZMY10
ZMY12
ZMY3V9 to ZMY100
www.vishay.com Vishay Semiconductors
Rev. 1.9, 16-Feb-18 4Document Number: 85788
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 7 - Breakdown Characteristics Fig. 8 - Breakdown Characteristics
PACKAGE DIMENSIONS in millimeters (inches): MELF DO-213AB (glass)
0 5 101520253035
40 45 50 V
10
20
30
40
50
60
mA
IZ
VZ
18310
Tj = 25 °C
ZMY...
Test Current lZ
25 mA
10 mA
ZMY22
ZMY18
ZMY27
ZMY33
ZMY15
ZMY39
ZMY47
0
0 100 200 V
0
10
20
mA
IZ
V
Z
18311
50 150
Test Current lZ
10 mA
5 mA
Tj = 25 °C
ZMY56
ZMY68
ZMY82
ZMY100
ZMY...
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
ZMY10-GS08 ZMY100-GS08 ZMY11-GS08 ZMY12-GS08 ZMY13-GS08 ZMY15-GS08 ZMY16-GS08 ZMY18-
GS08 ZMY20-GS08 ZMY22-GS08 ZMY24-GS08 ZMY27-GS08 ZMY3V9-GS08 ZMY30-GS08 ZMY33-GS08
ZMY36-GS08 ZMY39-GS08 ZMY4V3-GS08 ZMY4V7-GS08 ZMY43-GS08 ZMY47-GS08 ZMY5V1-GS08 ZMY5V6-
GS08 ZMY51-GS08 ZMY56-GS08 ZMY6V2-GS08 ZMY6V8-GS08 ZMY62-GS08 ZMY68-GS08 ZMY7V5-GS08
ZMY75-GS08 ZMY8V2-GS08 ZMY82-GS08 ZMY9V1-GS08 ZMY91-GS08 ZMY10-GS18 ZMY100-GS18 ZMY11-
GS18 ZMY12-GS18 ZMY13-GS18 ZMY15-GS18 ZMY16-GS18 ZMY18-GS18 ZMY20-GS18 ZMY22-GS18
ZMY24-GS18 ZMY27-GS18 ZMY3V9-GS18 ZMY30-GS18 ZMY33-GS18 ZMY36-GS18 ZMY39-GS18 ZMY4V3-
GS18 ZMY4V7-GS18 ZMY43-GS18 ZMY47-GS18 ZMY5V1-GS18 ZMY5V6-GS18 ZMY51-GS18 ZMY56-GS18
ZMY6V2-GS18 ZMY6V8-GS18 ZMY62-GS18 ZMY68-GS18 ZMY7V5-GS18 ZMY75-GS18 ZMY8V2-GS18 ZMY82-
GS18 ZMY9V1-GS18 ZMY91-GS18