P13SMNFRS103MA - Vishay / Sfernice

P13SM

www.vishay.com Vishay Sfernice

Revision: 04-Jul-17 1Document Number: 51064

For technical questions, contact: sferpottrimmers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fully Sealed Container Cermet Potentiometers

Submarine Applications

P13SM is designed for applications which need to set

electrical parameters with an immersed potentiometer in

deep water conditions up to 30 m (100 feet).

FEATURES

• High power rating 1.5 W at 70 °C

• Stainless steel shaft and bushing to endure sea

salt water immersion

• Fully sealed IP68 on panel

• Tight temperature coefficient (± 75 ppm/°C typical)

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

Note

(1) CAUTION: Ø 1.5 of panel cut out must not be fully through-hole

Undergoes European Quality Insurance System

QUICK REFERENCE DATA

Multiple module No

Switch module n/a

Detent module n/a

Special electrical laws A: linear, L: logarithmic, F: reverse

logarithmic

Sealing level IP 68

Lifespan 25K cycles

DIMENSIONS in millimeters (inches) ± 0.5 mm (± 0.02")

P13SM N

P13SM B

2.4

1.6

5.08

1.6

0.3 2

0.8

5.08

Panel Cutout

FR = 50

FL = 25

FG = 16

Ø 6

14.6 max. 10.3

Thread M10 x 0.75

Slot 1 x 1.8 deep

Ø 14Ø 16

Ø 1.5 (1)

6.9 ± 0.2

Ø 10.5

2.4

1.6

5.08

1.6

0.3 2

0.8

5.08

BJ = 22.2

BB = 12.7

9.52

Ø 3.17 (0.125")

Ø 12.6

(0.5")

Slot 0.6 x 1 deep

13.2 max. 1/4-32 UNEF-2A

Panel Cutout

Ø 1.5 (1)

3.9 ± 0.2

Ø 6.5

P13SM

www.vishay.com Vishay Sfernice

Revision: 04-Jul-17 2Document Number: 51064

For technical questions, contact: sferpottrimmers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ELECTRICAL SPECIFICATIONS

Resistive element Cermet

Electrical travel 270° ± 10°

Resistance range linear taper 22 Ω to 10 MΩ

logarithmic taper 1 kΩ to 2.2 MΩ

Standard series E3 1, 2.2, 4.7, and on request 1, 2, 5

Tolerance standard ± 20 %

on request ± 10 % to ± 5 %

Taper

Circuit diagram

Power rating

Linear

1.5 W at 70 °C

Logarithmic

0.75 W at 70 °C

Temperature coefficient (typical)

± 150 ppm/°C

For values ≥ 100 Ω and in temperature range +20 °C to +70 °C,

the typical temperature coefficient is ± 75 ppm/°C

Limiting element voltage (linear law) 350 V

Contact resistance variation 3 % Rn or 3 Ω

End resistance (typical) 1 Ω

Dielectric strength (RMS) 2000 V

Insulation resistance (300 VDC)106 MΩ

Independent linearity (typical) ± 5 %

100

00 10080604020

% CLOCKWISE SHAFT ROTATION

% TOTAL RESISTANCE

(1)

(2)

(3)

AMBIENT TEMPERATURE IN °C

POWER IN W

0 20 40 60 70 80 100 120 140

1.5

LIN. TAPER A

0.5

LOG. TAPER

L and F

P13SM

www.vishay.com Vishay Sfernice

Revision: 04-Jul-17 3Document Number: 51064

For technical questions, contact: sferpottrimmers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

STANDARD RESISTANCE ELEMENT DATA

STANDARD

RESISTANCE

VALUES

LINEAR TAPER LOGS TAPED TYPICAL

TCR

-55 °C

+125 °C

MAX.

POWER

AT 70 °C

MAX.

WORKING

VOLTAGE

MAX. CUR.

THROUGH

WIPER

MAX.

POWER

AT 70 °C

MAX.

WORKING

VOLTAGE

MAX. CUR.

THROUGH

WIPER

ΩWVmAWVmAppm/°C

22 1.5 5.74 261 - - -

± 150

47 1.5 8.4 177 - - -

100 1.5 12.2 122 - - -

220 1.5 18.2 82.6 - - -

470 1.5 26.5 56.5 - - -

1K 1.5 38.7 38.7 0.75 27 27

2.2K 1.5 57.5 26.1 0.75 40 18

4.7K 1.5 84 17.9 0.75 59 12

10K 1.5 122.5 12.2 0.75 87 8.7

22K 1.5 182 8.26 0.75 128 5.8

47K 1.5 265 5.65 0.75 187 3.9

100K 1.22 350 3.5 0.75 273 2.7

220K 0.56 350 1.6 0.56 350 1.6

470K 0.26 350 0.74 0.26 350 0.74

1M 0.12 350 0.35 0.12 350 0.35

2.2M 0.05 350 0.16 0.05 350 0.16

4.7M 0.026 350 0.074 - - -

10M 0.012 350 0.035 - - -

MECHANICAL SPECIFICATIONS

Mechanical travel

Style B 300° ± 5°

Style N 310° ± 5°

Operating torque (typical) 2 Ncm 2.85 oz. inch

End stop torque

Style B 35 Ncm max. 3.1 lb inch max.

Style N 80 Ncm max. 7.1 lb inch max.

Tightening torque of mounting nut

Style B 80 Ncm min., 150 Ncm max. 7 lb inch min., 13.3 lb inch max.

Style N 80 Ncm min., 250 Ncm max. 7 lb inch min., 22.1 lb inch max.

Unit weight 8 g to 27 g 0.3 oz. to 1 oz.

Terminals e3: pure Sn

ENVIRONMENTAL SPECIFICATIONS

Temperature range -55 °C to +125 °C

Climatic category 55 / 125 / 56

Sealing Fully sealed - container IP68

Panel sealing Immersion at 30 m (100 feet) in sea salt water or clear water

P13SM

www.vishay.com Vishay Sfernice

Revision: 04-Jul-17 4Document Number: 51064

For technical questions, contact: sferpottrimmers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

• Nothing stated herein shall be construed as a guarantee of quality or durability

OPTIONS

Special feature command shaft

Length is measured from the mounting surface to the free end of the shaft. The

screwdriver slot is aligned with the wiper within ± 10°. Special shafts are available, in

accordance to drawings supplied by customers. We recommend that customers

should not machine tool shafts, in order to avoid damage. Bending or torsion of

terminals should also be avoided.

MARKING

Printed:

• Vishay trademark

• Part number (including ohmic value code, tolerance code and resistance law)

• Manufacturing date

•Marking of terminals a

PACKAGING

In box

Packaging quantity depending on shafts:

• Box of 5 pieces for shaft FR (code BO5)

• Box of 10 pieces for shaft FG or FL (code BO10)

• Box of 15 pieces for shaft BJ (code BO15)

• Box of 25 pieces for shaft BB (code BO25)

PERFORMANCE

TESTS CONDITIONS TYPICAL VALUES AND DRIFTS

ΔRT/RT (%) ΔR1-2/R1-2 (%) OTHER

Electrical endurance 1000 h at rated power

90'/30' - ambient temperature 70 °C ± 1 % - Contact res. variation: < 3 % Rn

Climatic sequence

Phase A dry heat 125 °C

Phase B damp heat

Phase C cold -55 °C

Phase D damp heat 5 cycles

± 0.5 % ± 1 % -

Damp heat, steady state 56 days

40 °C, 93 % HR ± 0.5 % ± 1 % Dielectric strength: 1000 V

Insulation resistance: > 104 MΩ

Change of temperature 5 cycles

-55 °C at +125 °C ± 0.5 % - -

Mechanical endurance 25 000 cycles ± 3 % - Contact res. variation: < 2 % Rn

Shock

50 g’s at 11 ms

3 successive shocks

in 3 directions

± 0.1 % ± 0.2 % -

Vibration

10 Hz to 55 Hz

0.75 mm or 10 g’s

during 6 h

± 0.1 % - ΔV1-2/V1-3 < ± 0.2 %

P13SM

www.vishay.com Vishay Sfernice

Revision: 04-Jul-17 5Document Number: 51064

For technical questions, contact: sferpottrimmers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ORDERING INFORMATION (Part Number)

MODEL BUSHING SHAFT SHAFT

STYLE

OHMIC

VALUE TOLERANCE TAPER SPECIAL

P13SM ØL

Shaft

Ø L S = slotted

On request:

R = round

F = flat

D = custom

Linear law

from 22 Ω

to 10 MΩ

Logarithmic

law from

1 kΩ to 2.2 MΩ

103 = 10 kΩ

M = 20 %

On request:

K = 10 %

J = 5 %

A = linear

L = clockwise

logarithmic

F = inverse

clockwise

logarithmic

E =

locating peg

special code

given by

Vishay

BB 3.17 12.7

N 10 10.3 6 BJ 3.17 22.2

B 6.35 9.52 3.17 FG 6 16

FL 6 25

FR 6 50

AP Custom

PART NUMBER DESCRIPTION (for information only)

P13SM N E FL S 10K 20 % A BO10 e3

MODEL BUSHING SPECIAL SHAFT SHAFT

STYLE VALUE TOLERANCE TAPER SPECIAL PACKAGING SHAFT SPECIAL LEAD

(Pb)-FREE

RELATED DOCUMENTS

APPLICATION NOTES

Potentiometers and Trimmers www.vishay.com/doc?51001

Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029

LS103MANS FM E1 3P

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Vishay:

P13SMNFGS102MA P13SMNFGS103MA P13SMNFGS471MA P13SMNFGS472MA P13SMNFGS473MA

P13SMNFLS102MA P13SMNFLS103MA P13SMNFLS471MA P13SMNFLS472MA P13SMNFLS473MA

P13SMNFRS102MA P13SMNFRS103MA P13SMNFRS471MA P13SMNFRS472MA P13SMNFRS473MA