PHOTOTRANSISTOR KP-1608P1C WATER CLEAR LENS Description Features ! MECHANICALLY AND SPECTRALLY MATCHED TO Made with NPN silicon phototransistor chips. THE KP-1608 SERIES INFRARED EMITTING LED LAMP. ! WATER CLEAR LENS. ! PACKAGE :2000PCS/REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: KDA0532 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: SEP/17/2001 DRAWN:X.Q.ZHENG PAGE: 1 OF 3 Absolute Maximum Rating at T)=25C Par ameter Max . Ratin g s Collector-to-Emitter Breakdown Voltage 30V Emitter-to-Collector Breakdown Voltage 5V Power Dissipation at (or below) 25C Free Air Temperature 100mW Operating Temperature Range -40C ~ +85C Storage Temperature Range -40C ~ +85C Electrical And Radiant Characteristics at T)=25C Sy m b o l Par ameter Min . Ty p . Max . Un i t Tes t Co n d ic tio n V BR C EO Collector-to-Emitter Breakdown Voltage 30 - - V I C=100uA, Ee=0mW/cm2 V BR EC O Emitter-to-Collector Breakdown Voltage 5 - - V I E=100uA, Ee=0mW/cm2 VCE (SAT) Collector-to-Emitter Saturation Voltage - - 0.8 V I C=2mA, Ee=20mW/cm2 ICEO Collector Dark Current - - 100 nA VCE=10V, Ee=0mW/cm2 TR Rise Time (10% to 90%) - 3 - us TF Fall Time (90% to 10%) - 3 - us VCE=5V, IC=1mA, RL=1000 0.1 0.3 - mA I (ON) On State Collector Current SPEC NO: KDA0532 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: SEP/17/2001 DRAWN:X.Q.ZHENG VCE=5V, Ee=1mW/cm2, =940nm PAGE: 2 OF 3 KP-1608P1C SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: KDA0532 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: SEP/17/2001 DRAWN:X.Q.ZHENG PAGE: 3 OF 3