Low Signal Relay G6K Fourth generation design Design based on worldwide communications, computer peripheral and office automation relay requirements Offers excellent board space savings Meets 2.5kV Bellcore surge requirements Terminal design based on Omron's successful G6S relay Available in PCB through-hole, SMT gullwing and SMT "inside-L" terminals 85C high ambient versions coming soon! Ordering Information To Order: Select the part number and add the desired coil voltage rating (e.g., G6K-2F-DC5). Part number (non-latching, fully sealed) Type Contact form SMT gullwing SMT "inside-L" PCB through-hole Standard DPDT G6K-2F G6K-2G G6K-2P High-Ambient DPDT To be announced Specifications CONTACT DATA Load Rated load Resistive load (cos=1) 0.3 A at 125 VAC 1 A at 30 VDC Contact material Ag (Au clad) Max. carry current 1A Max. operating voltage 125 VAC, 60 VDC Max. operating current 1A Max. switching capacity 37.5 VA, 30W Min. permissible load 10 A at 10 mVDC G6K G6K Standard DPDT (G6K-2F, G6K-2G, G6K-2P) Rated voltage (VDC) Rated current (mA) Coil resistance () Pick-up voltage Dropout voltage Maximum voltage Power consumption (mW) 3 33.0 91 4.5 23.2 194 80% max. 10% min. 200% max. 100 (approx.) 5 21.1 237 6 17.6 341 9 11.3 795 12 8.5 1,407 24 4.6 5,220 Dropout voltage Maximum voltage Power consumption (mW) 10% min. 200% max. 140 (approx.) % of rated voltage High-ambient DPDT (To be released) Rated voltage (VDC) Rated current (mA) Coil resistance () Pick-up voltage 3 46.7 64 75% max. 4.5 31.1 145 5 28.0 179 6 23.3 257 9 15.6 579 12 11.7 1,029 24 5.8 4,114 Note: 1. 2. 3. 4. 5. % of rated voltage The rated current and coil resistance are measured at a coil temperature of 23C (73F) with a tolerance of 10%. The operating characteristics are measured at a coil temperature of 23C (73F) unless otherwise specified. Pick-up voltage is measured with no carry current across the contacts. Pick-up voltage will vary with temperature. Specifications subject to change without notice. CHARACTERISTICS Contact resistance (initial) 80 m max. Operate time 3 ms max. Release time 3 ms max. Bounce time 3 ms max. Insulation resistance 1,000 M min. (at 500 VDC) Dielectric strength 1,500 VAC for 1 min. between coil and contacts 1,000 VAC for 1 minute between contacts of different poles 750 VAC for 1 minute between contacts of the same pole Surge withstand voltage 2,500 V, 2x10s (conforms to Bellcore specifications) between coil and contacts 1,500 V, 10x160s (conforms to FCC Part 68) between contacts of different poles 1,500 V, 10x160s (conforms to FCC Part 68) between contacts of the same pole Vibration Shock Mechanical durability 10 to 55 Hz; 5.0 mm double amplitude Malfunction durability 10 to 55 Hz; 3.3 mm double amplitude Mechanical durability 1,000 m/s2; approx. 100G Malfunction durability 750 m/s2; approx. 75G Ambient temperature Standard versions: -40C to 70C (-40F to 158F) High ambient versions: -40C to 85C (-40F to 185F) Humidity 35 to 85% RH Service life Mechanical 100,000,000 operations min. (at 36,000 operations per hour) Electrical 100,000 operations min. at rated load (at 1,800 operations per hour) Note: Data shown are of initial value. 2 G6K G6K APPROVALS UL (File No. E41515) / CSA (File No. LR24825) pending Type Contact form Coil rating Contact ratings G6K-2F DPDT 3 to 24 VDC 0.3A, 125VAC G6K-2G 0.5A, 60VDC G6K-2P 1A, 30VDC Dimensions Unit: mm (inch) RELAYS G6K-2F 10 0.2 (0.39) Terminal arrangement/ Internal connections (top view) 6.5 0.2 (0.26) Mounting pads (top view) 2.54 (0.10) 2.54 (0.10) 2.54 (0.10) 5.0 0.3 (0.20) 1.4 (0.06) 0.5 (0.02) 2.54 (0.10) 2.54 (0.10) 2.54 (0.10) 8.2 (0.32) 7.2 2 (0.08) (0.28) 0.1 (0.004) Orientation mark G6K-2G 1 (0.04) Terminal arrangement/ Internal connections (top view) 6.5 0.2 (0.26) 10 0.2 (0.39) Mounting pads (top view) 2.54 (0.10) 2.54 (0.10) 5.0 0.3 (0.20) 1.4 (0.06) 0.5 (0.02) 2.54 (0.10) 2.54 (0.10) 2.54 (0.10) 4.5 (0.18) 0.1 (0.004) 1 (0.04) Orientation mark Terminal arrangement/ Internal connections (bottom view) 6.5 0.2 (0.26) 10 0.2 (0.39) Orientation mark 1.19 (0.05) Mounting holes (bottom view) 2.54 (0.10) Eight, 0.8-dia. holes 2.54 (0.10) 5.0 0.3 0.1 (0.20) (0.004) 0.5 (0.02) 0.4 (0.02) 2.54 (0.10) 2.54 (0.10) 5.5 2 (0.22) (0.08) G6K-2P 3.5 (0.14) 1.19 (0.05) 5.08 0.1 (0.20) R0.2 2.54 (0.10) 2.54 (0.10) 5.08 (0.20) 0.15 (0.01) 0.71 (0.03) 1.19 (0.05) 7.62 0.1 (0.30) 3 G6K G6K ACCESSORIES Relays in tube packing are arranged so that the orientation mark of each Relay is on the left side. Be sure to reference Relay orientation when mounting the Relay to the PCB. Tube packing Standard nomenclature 50 pcs per anti-static tube Tape packing When ordering, add "TR" before the rated coil voltage (e.g., G6K-2G-TR-DC5) Note: TR is not part of the relay model number and will not be marked on the relay TAPE AND REEL DIMENSIONS Tape type: ETX7200 (EIAJ - Electronic Industrial Association of Japan) 16mm tape meets EIA Standards 5.6mm pocket depth 12mm pitch 4mm sproket pitch Reel type: RPM-16D (EIAJ), 330mm Relays per reel: 900 1. Direction of Relay Insertion 3. Carrier Tape Dimensions G6K-2F Orientation mark Top tape (cover tape) Pulling direction Carrier tape Emboss tape 2. Reel Dimensions G6K-2G OMRON ELECTRONICS, INC. OMRON CANADA, INC. One East Commerce Drive Schaumburg, IL 60173 885 Milner Avenue Scarborough, Ontario M1B 5V8 1-800-55-OMRON 416-286-6465 Cat. 4 No. K106-E3-1 7/98/5M Specifications subject to change without notice. Printed in the U.S.A.