■Fourth generation design
■Design based on worldwide communica-
tions, computer peripheral and office
automation relay requirements
■Offers excellent board space savings
■Meets 2.5kV Bellcore surge require-
ments
■Terminal design based on Omron's
successful G6S relay
■Available in PCB through-hole, SMT
gullwing and SMT “inside-L” terminals
■85°C high ambient versions coming
soon!
Lo w Signal Relay G6K
Specifications
■CONTACT DATA
Load Resistive load (cosφ=1)
Rated load 0.3 A at 125 VAC
1 A at 30 VDC
Contact material Ag (Au clad)
Max. carry current 1 A
Max. operating voltage 125 VAC, 60 VDC
Max. operating current 1 A
Max. switching capacity 37.5 VA, 30W
Min. permissible load 10 µA at 10 mVDC
To Order: Select the part number and add the desired coil voltage rating (e.g., G6K-2F-
DC5
).
Part number (non-latching, fully sealed)
Type Contact form SMT gullwing SMT “inside-L” PCB through-hole
Standard DPDT G6K-2F G6K-2G G6K-2P
High-Ambient DPDT To be announced
Ordering Inf ormation
G6K G6K
2
Note: Data shown are of initial value.
Standard DPDT (G6K-2F, G6K-2G, G6K-2P)
■CHARACTERISTICS
Contact resistance (initial) 80 mΩ max.
Operate time 3 ms max.
Release time 3 ms max.
Bounce time 3 ms max.
Insulation resistance 1,000 MΩ min. (at 500 VDC)
Dielectric strength 1,500 VAC for 1 min. between coil and contacts
1,000 VAC for 1 minute between contacts of different poles
750 VAC for 1 minute between contacts of the same pole
Surge withstand voltage 2,500 V, 2x10µs (conforms to Bellcore specifications) between coil and contacts
1,500 V, 10x160µs (conforms to FCC Part 68) between contacts of different poles
1,500 V, 10x160µs (conforms to FCC Part 68) between contacts of the same pole
Vibration Mechanical durability 10 to 55 Hz; 5.0 mm double amplitude
Malfunction durability 10 to 55 Hz; 3.3 mm double amplitude
Shock Mechanical durability 1,000 m/s2; approx. 100G
Malfunction durability 750 m/s2; approx. 75G
Ambient temperature Standard versions: -40°C to 70°C (-40°F to 158°F)
High ambient versions: -40°C to 85°C (-40°F to 185°F)
Humidity 35 to 85% RH
Ser vice life Mechanical 100,000,000 operations min. (at 36,000 operations per hour)
Electrical 100,000 operations min. at rated load (at 1,800 operations per hour)
Rated Rated Coil Pick-up Dropout Maximum Power
voltage current resistance voltage voltage voltage consumption
(VDC) (mA) (Ω)% of rated voltage (mW)
3 33.0 91 80% max. 10% min. 200% max. 100 (approx.)
4.5 23.2 194
5 21.1 237
6 17.6 341
9 11.3 795
12 8.5 1,407
24 4.6 5,220
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C (73°F) with a tolerance of ± 10%.
2. The operating characteristics are measured at a coil temperature of 23°C (73°F) unless otherwise specified.
3. Pick-up voltage is measured with no carr y current across the contacts.
4. Pick-up voltage will vary with temperature.
5. Specifications subject to change without notice.
High-ambient DPDT (To be released)
Rated Rated Coil Pick-up Dropout Maximum Power
voltage current resistance voltage voltage voltage consumption
(VDC) (mA) (Ω)% of rated voltage (mW)
3 46.7 64 75% max. 10% min. 200% max. 140 (approx.)
4.5 31.1 145
5 28.0 179
6 23.3 257
9 15.6 579
12 11.7 1,029
24 5.8 4,114
G6K G6K
3
G6K-2F Terminal arrangement/ Mounting pads
Internal connections (top view)
(top view)
G6K-2G Terminal arrangement/ Mounting pads
Internal connections (top view)
(top view)
Unit: mm (inch)
Dimensions
■RELAYS
■APPROVALS
UL (File No. E41515) / CSA (File No. LR24825) pending
G6K-2P Terminal arrangement/ Mounting holes
Internal connections (bottom view)
(bottom view)
Orientation mark
Orientation mark
Orientation mark
2.54
(0.10)
2.54
(0.10) 2.54
(0.10)
5.5
(0.22)
1
(0.04)
1.19
(0.05)
2
(0.08)
Eight, 0.8-dia. holes
2.54
(0.10)
2.54
(0.10)
5.08 ±0.1
(0.20)
7.62 ±0.1
(0.30)
0.71
(0.03)
1.19
(0.05)
2.54
(0.10)
2.54
(0.10) 2.54
(0.10)
7.2
(0.28)
2
(0.08)
1
(0.04)
1.19
(0.05)
5.0 ±0.3
(0.20)
10 ±0.2
(0.39)
2.54
(0.10)
2.54
(0.10)
0.5
(0.02)
2.54
(0.10)
8.2
(0.32) 0.1
(0.004)
6.5 ±0.2
(0.26)
1.4
(0.06)
2.54
(0.10)
2.54
(0.10)
2.54
(0.10)
0.5
(0.02)
5.0 ±0.3
(0.20)
10 ±0.2
(0.39)
1.4
(0.06) 0.1
(0.004)
6.5 ±0.2
(0.26)
4.5
(0.18)
6.5 ±0.2
(0.26)
5.08
(0.20)
0.15
(0.01)
5.0 ±0.3
(0.20)
2.54
(0.10) 2.54
(0.10)
2.54
(0.10)
R0.2
10 ±0.2
(0.39)
0.4
(0.02)
0.5
(0.02)
0.1
(0.004)
3.5
(0.14)
Type Contact form Coil rating Contact ratings
G6K-2F DPDT 3 to 24 VDC 0.3A, 125VAC
G6K-2G 0.5A, 60VDC
G6K-2P 1A, 30VDC
G6K G6K
4
■ACCESSORIES
■TAPE AND REEL DIMENSIONS
Relays in tube packing are arranged so that the orientation mark of each Relay is on the left side. Be sure to reference Relay orienta-
tion when mounting the Relay to the PCB.
● Tape type: ETX7200 (EIAJ - Electronic Industrial Association of Japan)
● 16mm tape meets EIA Standards
5.6mm pocket depth
12mm pitch
4mm sproket pitch
● Reel type: RPM-16D (EIAJ), 330mm
● Relays per reel: 900
Tube packing Standard nomenclature 50 pcs per anti-static tube
Tape packing When ordering, add "TR" before the rated coil voltage (e.g., G6K-2G-
TR
-DC5)
Note: TR is not part of the relay model number and will not be marked on the relay
OMRON ELECTRONICS, INC. OMRON CANADA, INC.
One East Commerce Drive 885 Milner Avenue
Schaumburg, IL 60173 Scarborough, Ontario M1B 5V8
1-800-55-OMRON 416-286-6465
Cat. No. K106-E3-1 7/98/5M Specifications subject to change without notice. Printed in the U.S.A.
1. Direction of Relay Inser tion 3. Carr ier Tape Dimensions
G6K-2F
2. Reel Dimensions G6K-2G
Carrier tape
Top tape (cover tape)
Emboss tape
Orientation mark
Pulling direction
