B39172B5149U410 - TDK - Datasheet.Live

RF360 Europe GmbH

A Qualcomm – TDK Joint Venture

RF360 products mentioned within this document are offered by RF360 Europe GmbH and other subsidiaries of

RF360 Holdings Singapore Pte. Ltd. (collectively, the “RF360 Subsidiaries”). RF360 Holdings Singapore Pte. Ltd.

is a joint venture of Qualcomm Global Trading Pte. Ltd. and EPCOS AG. References in this documentation to

EPCOS AG should properly reference, and shall be read to reference, the RF360 Subsidiaries.

RF360 Europe GmbH, Anzinger Str. 13, München, Germany

SAW Components

SAW RF filter for base stations

Band 3 uplink

Series/type: B5149

Ordering code: B39172B5149U410

Date: Dec 18, 2015

Version: 2.5

These materials, including the information contained herein, may be used only for informational purposes by

the customer. The RF360 Subsidiaries assume no responsibility for errors or omissions in these materials or

the information contained herein. The RF360 Subsidiaries reserve the right to make changes to the product(s)

or information contained herein without notice. The materials and information are provided on an AS IS basis,

and the RF360 Subsidiaries assume no liability and make no warranty or representation, either expressed or

implied, with respect to the materials, or any output or results based on the use, application, or evaluation of

such materials, including, without limitation, with respect to the non-infringement of trademarks, patents,

copyrights or any other intellectual property rights or other rights of third parties.

No use of this documentation or any information contained herein grants any license, whether express, implied,

by estoppel or otherwise, to any intellectual property rights, including, without limitation, to any patents owned

by QUALCOMM Incorporated or any of its subsidiaries.

Not to be used, copied, reproduced, or modified in whole or in part, nor its contents revealed in any manner to

others without the express written permission of RF360 Europe GmbH.

Qualcomm and Qualcomm RF360 are trademarks of Qualcomm Incorporated, registered in the United States

and other countries. RF360 is a trademark of Qualcomm Incorporated. Other product and brand names may be

trademarks or registered trademarks of their respective owners.

This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws.

Diversion contrary to U.S. and international law is strictly prohibited.

EPCOS AG 2015. Reproduction, publication and dissemination of this data sheet, enclosures

hereto and the information contained therein without EPCOS’ prior express consent is prohibited.

SAW Components

SAW RF filter for base stations

Band 3 uplink

Series/type:

Ordering code: B5149

B39172B5149U410

Date:

Version: Dec 18, 2015

2.5

2Dec 18, 2015

B5149

1747.5 MHz

Please read cautions and warnings and

important notes at the end of this document.

SAW Components

SAW RF filter

Data sheet

Application

■Low-loss base-station band 3 uplink

■Low amplitude ripple

■No matching required for operation at 50 Ω

■Usable passband 75 MHz

■Reduced fc shift over temperature

■30 dB selectivity at 1805 MHz

Features

■Package size 3.0 x 3.0 x 1.1 mm3

■Package code DCC6C

■RoHS compatible

■Approximate weight 0.037 g

■Package for Surface Mount Technology (SMT)

■Ni, gold-plated terminals

■Electrostatic Sensitive Device (ESD)

■Moisture Sensitivity Level 1

■Filter surface passivated

Pin configuration

■2 Input unbalanced

■5 Output unbalanced

■1, 3, 4, 6 To be grounded

3Dec 18, 2015

B5149

1747.5 MHz

SAW Components

SAW RF filter

Data sheet

Please read cautions and warnings and

important notes at the end of this document.

Characteristics

Temperature range for specification: T= –40 ˚C to +95 ˚C

Terminating source impedance: ZS=50 Ω

Terminating load impedance: ZL=50Ω

min. typ.

@ 25 ˚C max.

Center frequency fC— 1747.5 — MHz

Maximum insertion attenuation αmax

1710.0 ... 1785.0 MHz — 2.0 3.3 dB

Passband width αrel ≤ 3.0 dB B3.0dB 75 86 — MHz

Amplitude ripple (p-p) ∆α

1710.0 ... 1785.0 MHz — 1.0 2.2 dB

Group delay ripple (p-p) ∆τ

1710.0 ... 1785.0 MHz — 15 40 ns

VSWR 1710.0 ... 1785.0 MHz — 1.7:1 2.2:11)

1) 2.0:1 for temperature -20 ˚C to +85 ˚C

Absolute attenuation αabs

10.0 ... 1670.0 MHz 24 28 — dB

1670.0 ... 1683.0 MHz 20 28 — dB

1683.0 ... 1690.0 MHz 6 20 — dB

1805.0 ... 1825.0 MHz 30 35 — dB

1825.0 ... 1880.0 MHz 35 45 — dB

1880.0 ... 2110.0 MHz 30 35 — dB

2110.0 ... 2170.0 MHz 27 30 — dB

2170.0 ... 2690.0 MHz 20 25 — dB

2690.0 ... 3600.0 MHz 13 20 — dB

3600.0 ... 5200.0 MHz 3 7 — dB

4Dec 18, 2015

B5149

1747.5 MHz

Please read cautions and warnings and

important notes at the end of this document.

SAW Components

SAW RF filter

Data sheet

Maximum ratings

Operable temperature range T–40/+95 ˚C

Storage temperature range Tstg –40/+95 ˚C

DC voltage VDC 0 V

ESD voltage VESD 1501)

1) acc. to JESD22-A115B (MM - Machine Model), 10 negative & 10 positive pulses

VMachine Model

2002)

2) acc. to JESD22-A114F (HBM - Human Body Model), 1 negative & 1 positive pulse

VHuman Body Model

Input power PIN

1710.0 ... 1785.0 MHz 14 dBm cw, 100000 h, 85 ˚C

1710.0 ... 1785.0 MHz 20 dBm cw, 1000 h, 85 ˚C

1710.0 ... 1785.0 MHz 23 dBm cw, 2 h, 85 ˚C

1710.0 ... 1785.0 MHz 25 dBm cw, 1 h, 85 ˚C

5Dec 18, 2015

B5149

1747.5 MHz

SAW Components

SAW RF filter

Data sheet

Please read cautions and warnings and

important notes at the end of this document.

Transfer function (S21, narrowband)

Transfer function (S21, wideband)

6Dec 18, 2015

B5149

1747.5 MHz

Please read cautions and warnings and

important notes at the end of this document.

SAW Components

SAW RF filter

Data sheet

Smith charts

S11 function

S22 function

7Dec 18, 2015

B5149

1747.5 MHz

SAW Components

SAW RF filter

Data sheet

Please read cautions and warnings and

important notes at the end of this document.

References

Type B5149

Ordering code B39172B5149U410

Marking and package C61157-A7-A67

Packaging F61074-V8228-Z000

Date codes L_1126

S-parameters B5149_NB.s2p

B5149_WB.s2p

see file header for port/pin assignment table

Soldering profile S_6001

RoHS compatible RoHS-compatible means that products are compatible with the

requirements according to Art. 4 (substance restrictions) of Di-

rective 2011/65/EU of the European Parliament and of the

Council of June 8th, 2011, on the restriction of the use of certain

hazardous substances in electrical and electronic equipment

("Directive") with due regard to the application of exemptions as

per Annex III of the Directive in certain cases.

Matching coils See Inductor pdf-catalog

http://

www

.tdk.co.jp/tefe02/coil.htm#aname1

and Data Library for circuit simulation

http://www.tdk.co.jp/etvcl/index.htm

for a large variety of matching coils.

For further information please contact your local EPCOS sales office or visit our webpage at

www.epcos.com .

Published by EPCOS AG

Systems, Acoustics, Waves Business Group

P.O. Box 80 17 09, 81617 Munich, GERMANY

EPCOS AG 2015. This brochure replaces the previous edition.

For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or

the international Representatives.

Due to technical requirements components may contain dangerous substances. For information on

the type in question please also contact one of our Sales Offices.

8Dec 18, 2015

B5149

1747.5 MHz

Please read cautions and warnings and

important notes at the end of this document.

SAW Components

SAW RF filter

Data sheet

The following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. These statements are based on our knowledge of typical

requirements that are often placed on our products in the areas of application concerned. We

nevertheless expressly point out that such statements cannot be regarded as binding

statements about the suitability of our products for a particular customer application.

As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar

with them than the customers themselves. For these reasons, it is always ultimately

incumbent on the customer to check and decide whether an EPCOS product with the

properties described in the product speciﬁcation is suitable for use in a particular customer

application.

2. We also point out that in individual cases, a malfunction of electronic components or

failure before the end of their usual service life cannot be completely ruled out in the

current state of the art, even if they are operated as speciﬁed. In customer applications

requiring a very high level of operational safety and especially in customer applications in

which the malfunction or failure of an electronic component could endanger human life or

health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by

means of suitable design of the customer application or other action taken by the customer

(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained

by third parties in the event of malfunction or failure of an electronic component.

3. The warnings, cautions and product-speciﬁc notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this

publication may contain substances subject to restrictions in certain jurisdictions (e.g.

because they are classed as hazardous). Useful information on this will be found in our

Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more

detailed questions, please contact our sales ofﬁces.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

speciﬁcations. Please check therefore to what extent product descriptions and speciﬁcations

contained in this publication are still applicable before or when you place an order.

We also reserve the right to discontinue production and delivery of products. Conse-

quently, we cannot guarantee that all products named in this publication will always be

available. The aforementioned does not apply in the case of individual agreements deviating

from the foregoing for customer-speciﬁc products.

6. Unless otherwise agreed in individual contracts, all orders are subject to the current

version of the “General Terms of Delivery for Products and Services in the Electrical

Industry” published by the German Electrical and Electronics Industry Association

(ZVEI).

7. The trade names EPCOS, Alu-X, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP,

CTVS, DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue,

MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine,

SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D,

SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and

in other countries. Further information will be found on the Internet at