Wound Chip Ferrite Inductors
Page <1> 18/05/09 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Features:
• Very strong solderability by flow soldering, soldering iron or wave soldering.
• Highly accurate dimensions, can be mounted automatically.
• Terminals are highly resistant to pull forces.
• Highly resistant to mechanical shocks and pressure.
• Highly reliable in environments of sudden temperature change and humidity. Super Q characteristics.
Applications:
Micro televisions, liquid crystal televisions, video cameras, portable VCRs, car radios, car stereos, thin tape radios, television tuners,
mobile telephones, radio and other electronic devices.
These revolutionary, highly reliable wound chip inductors for automatic mounting, have been developed in response to the trend
toward high density in electronic equipment.
With metal terminals and a body of heat resistant resin, these inductors offer many superior features.
Figure 1 Figure 2
Size Figure A
Maximum
B
Maximum
C
Maximum
D
Reference E E G K
Maximum
H
Maximum
I
Maximum
J
Maximum
0805
1
2.29 1.71 1.45 0.51 - 0.44 1.02 1.27 1.78
1.02
0.76
1008 2.92 2.79 2.10 1.20 - 0.45 1.52 2.03 2.54 1.27
1210
2
3.50 2.80 2.50 1.60 0.8 - - - 2.00 1.20 1.60
1812 4.80 3.50 3.50 1.80 1.1 - - - 2.80 1.50 3.00
0805
1
2.29 1.71 1.00 0.51 - 0.44 1.02 1.27 1.78
1.02
0.76
1008 2.92 2.79 2.10 1.20 - 0.45 1.52 2.03 2.54 1.27
1812 2 4.80 3.50 3.50 1.40 1.1 - - - 2.80 1.50 3.00
Dimensions
Dimensions : Millimetres
Wound Chip Ferrite Inductors
Page <2> 18/05/09 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Standard Electrical Specifications
Inductance
(nH)
Tolerance
(±%)
Q
Minimum
Test
Frequency
(MHz)
Self Resonant
Frequency
(MHz)
Maximum
DCResistance
(ΩΩ)
Maximum Rated
Current
(mA)
0.15
J, K
20 25.2
900 0.18 1100
0.22
550
0.25 700
0.33 0.35 650
0.47 350 0.45 600
0.68 300 0.60 500
1.00
15 7.96
280 0.80 450
1.50 250 1.05 350
2.20 110 1.10 320
3.30 60 1.50 300
4.70 45 2.10 200
6.80 36 2.70 200
10.00 10 2.52 30 4.50 180
0805 Wound Chip Inductors (Ferrite)
DC current at which the inductance drops 10% (typical) from its value without current.
Operating temperature range : -25°C to 85°C.
Tolerance : J = ±5%, K = ±10%.
L , Q : HP4291 for 0.12 to 10uH.
SRF : HP4291.
RDC : AX-1152B.
Wound Chip Ferrite Inductors
Page <3> 18/05/09 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
DC current at which the inductance drops 10% (typical) from its value without current.
Operating temperature range : -25°C to 85°C.
Tolerance : J = ±5%, K = ±10%.
L , Q : HP4291 for 0.12 to 10µH.
SRF : HP4291.
RDC : AX-1152B.
Standard Electrical Specifications
1008 Wound Chip Inductors (Ferrite)
Inductance
(µµH)
Tolerance
(±%)
Q
Minimum
Test
Frequency
(MHz)
Self Resonant
Frequency
(MHz)
Maximum DC
Resistance
(ΩΩ)
Maximum Rated
Current
(mA)
0.15
J, K
30 25.2
800 0.15 1200
0.22 600 0.25 1200
0.33 400 0.20 1100
0.47 350 0.45 900
0.68 300 0.40 800
1.00
25 7.96
245 0.50 600
1.50 182 0.65 550
2.20 105 0.95 500
3.30 55 1.15 350
4.70 43 1.28 300
6.80 39 1.60 300
10.00
20
2.52
33 2.30 250
15.00 24 2.70 200
22.00 18 3.30 180
33.00 16 4.00 120
47.00 18 14 5.90 110
68.00 18 12 9.50 90
100.00 12 1 8 110.00 120
Wound Chip Ferrite Inductors
Page <4> 18/05/09 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Standard Electrical Specifications
1210 Wound Chip Inductors (Ferrite)
Inductance
(µµH)
Tolerance
(±%)
Q
Minimum
Test
Frequency
(MHz)
Self Resonant
Frequency
(MHz)
Maximum DC
Resistance
(ΩΩ)
Maximum Rated
Current
(mA)
1.0
K
30
7.96
120 0.70 400
1.5 85 0.85 370
2.2 75 1.00 320
3.3 60 1.20 260
4.7 50 1.50 220
6.8 7.96 40 1.80 180
10.0
2.52
30 2.10 150
15.0 20 2.80 130
22.0 20 3.70 110
33.0 17 5.60 70
47.0 15 7.00 60
68.0 12 9.00 50
100.0
20 0.796
10 10.00 40
150.0 8 15.00 65
220.0 7 21.00 50
DC current at which the inductance drops 10% (typical) from its value without current.
Operating temperature range : -25°C to 85°C.
Tolerance : K = ±10%, K = ±20%.
L , Q : HP4291 for 0.18µH to 82µH.
HP4284 for 100µH to 220µH.
SRF : HP4291.
RDC : AX-1152B.
Wound Chip Ferrite Inductors
Page <5> 18/05/09 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Standard Electrical Specifications
1812 Wound Chip Inductors (Ferrite)
Inductance
(µµH)
Tolerance
(±%)
Q
Minimum
Test
Frequency
(MHz)
Self Resonant
Minimum Frequency
(MHz)
Maximum
DC Resistance
(ΩΩ)
Rated Current
(mA)
1.0
K
50
7.960
100.0 0.50 450
1.5 70.0 0.60 410
2.2 55.0 0.70 380
3.3 45.0 0.80 355
4.7 35.0 1.00 315
6.8 27.0 1.20 285
10.0
2.520
20.0 1.60 250
15.0 17.0 2.50 200
22.0 13.0 3.20 180
33.0 11.0 4.00 160
47.0 10.0 5.00 140
68.0 9.0 6.00 130
100.0
40
0.796
8.0 8.00 110
150.0 5.0 9.00 105
220.0 4.0 10.00 100
330.0
30
3.5 15.00 85
470.0
3.0
26.00 62
680.0 30.00 50
DC current at which the inductance drops 10% (typical) from its value without current.
Operating temperature range : -25°C to 85°C.
Tolerance : K = ±10%.
L , Q : HP4291 for 0.18µH to 82µH.
HP4284 for 100µH to 820µH.
SRF : HP4291.
RDC : AX-1152B.
Wound Chip Ferrite Inductors
Page <6> 18/05/09 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Standard Electrical Specifications
Inductance
(µµH)
Tolerance
(±%)
Q
Minimum
Test
Frequency
(MHz)
Self Resonant
Minimum Frequency
(MHz)
Maximum
DC Resistance
(ΩΩ)
Rated Current
(mA)
1.0
J, K
15 L: 7.96/Q : 25.2 115 0.90
450
3.3 13
7.96
70 1.40
4.7
15
65 1.90
4006.8 41 2.40
10 14 31 2.70
0805 Wound Chip Inductors (Ferrite) Large Current
1008 Wound Chip Inductors (Ferrite) Large Current
Inductance
(µµH)
Tolerance
(±%)
Q
Minimum
Test
Frequency
(MHz)
Self Resonant
Minimum Frequency
(MHz)
Maximum
DC Resistance
(Ohm)
Rated Current
(mA)
1.0
J, K
22
7.96
245 0.35 800
1.5 25 182 0.45
550
2.2
22
105 0.60
3.3 55 0.75 450
4.7 45 0.90
400
6.8 40 1.00
10.0
20 2.52
35 1.50 300
15.0 24 1.90 250
22.0 18 2.80 200
33.0 16 3.50 180
DC current at which the inductance drops 10% (typical) from its value without current.
Operating temperature range : -25°C to 85°C.
Tolerance : J = ±5%, K = ±10%.
L , Q : HP4291.
SRF : HP4291.
RDC : AX-1152B.
Wound Chip Ferrite Inductors
Page <7> 18/05/09 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Standard Electrical Specifications
1812 Wound Chip Inductors (Ferrite) Large Current
Inductance
(µµH)
Tolerance
(±%)
Q
Minimum
Test
Frequency
(MHz)
Self Resonant
Minimum Frequency
(MHz)
Maximum
DC Resistance
(ΩΩ)
Rated Current
(mA)
1.0
K
10
7.960
200.0 0.11 1050
1.5 130.0 0.15 950
2.2 80.0 0.18 850
3.3 45.0 0.22 750
4.7 35.0 0.27 650
6.8 28.0 0.35 600
10.0
2.520
22.0 0.50 550
15.0 20.0 0.70 450
22.0 18.0 0.90 370
33.0 14.0 1.40 300
47.0 11.5 1.90 260
68.0 10.0 2.60 220
100.0
20 0.796
8.0 4.00 180
150.0 7.0 6.50 140
220.0 5.5 9.00 120
330.0 4.0 13.00 90
470.0 3.5 26.00 75
680.0 2.6 40.00 65
DC current at which the inductance drops 10% (typical) from its value without current.
Operating temperature range : -25°C to 85°C.
Tolerance : K = ±10%.
L , Q : HP4291 for 0.18µH to 82µH.
HP4284 for 100µH to 820µH.
SRF : HP4291.
RDC : AX-1152B.
Wound Chip Ferrite Inductors
Page <8> 18/05/09 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Item Specification Test Method
Vibration
Appearance : no damage
L change : within ±10%
Q change : within ±30%
RDC : within specification
Test device shall be soldered on the substrate
Oscillation frequency: 10 to 55 to 10Hz for 1 minute
Amplitude: 1.5mm
Time: 2 hours for each axis (X, Y & Z), total 6 hours
Resistance to soldering
heat Appearance: no damage
Pre-heating : 150°C, 1 minute
Solder temperature : 260 ±5°C
Immersion time : 10 ±1 second
Solderability
The electrodes shall be at least
90% covered with new solder
coating
Lead-free inductor: after fluxing (alpha 100 or equiv), inductor
shall be dipped in a melted solder bath at 245 ±5°C, 5 ±0.5
seconds.
Environmental Characteristics
Mechanical Performance
Item Specification Test Method
Temperature cycle
Appearance: no damage
L change: within ±10%
Q change: within ±30%
RDC: within specification
One cycle:
Total: 100 cycles
Measured after exposure in the room condition for 24 hours
Humidity resistance
Temperature : 40 ±2°C
Relative Humidity : 90 to 95%
Time : 1000 hours
Measured after exposure in the room condition for 24 hours
High temperature
Storage
Temperature : 85 ±3°C
Relative humidity : 20%
Applied current : rated Current
Time : 1000 hours
Measured after exposure in the room condition for 24 hours
Low temperature
storage
Temperature : -25 ±3°C
Relative humidity : 0%
Time : 1000 hours
Measured after exposure in the room condition for 24 hours
Environmental Performance
Step Temperature
(°°C)
Time
(minute)
1-25 ±3 30
225 ±2 3
385 ±3 30
425 ±2 3
Wound Chip Ferrite Inductors
Page <9> 18/05/09 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Part Number Table
Description Part Number
Inductor, Ferrite, 0805, 0.15uH MCFT000152
Inductor, Ferrite, 0805, 0.22uH MCFT000153
Inductor, Ferrite, 0805, 0.33uH MCFT000154
Inductor, Ferrite, 0805, 0.47uH MCFT000155
Inductor, Ferrite, 0805, 0.68uH MCFT000156
Inductor, Ferrite, 0805, 1uH MCFT000157
Inductor, Ferrite, 0805, 1.5uH MCFT000158
Inductor, Ferrite, 0805, 2.2uH MCFT000159
Inductor, Ferrite, 0805, 3.3uH MCFT000160
Inductor, Ferrite, 0805, 4.7uH MCFT000161
Inductor, Ferrite, 0805, 6.8uH MCFT000162
Inductor, Ferrite, 0805, 10uH MCFT000163
Inductor, Ferrite, 1008, 0.15uH MCFT000164
Inductor, Ferrite, 1008, 0.22uH MCFT000165
Inductor, Ferrite, 1008, 0.33uH MCFT000166
Inductor, Ferrite, 1008, 0.47uH MCFT000167
Inductor, Ferrite, 1008, 0.68uH MCFT000168
Inductor, Ferrite, 1008, 1uH MCFT000169
Inductor, Ferrite, 1008, 1.5uH MCFT000170
Inductor, Ferrite, 1008, 2.2uH MCFT000171
Inductor, Ferrite, 1008, 3.3uH MCFT000172
Inductor, Ferrite, 1008, 4.7uH MCFT000173
Inductor, Ferrite, 1008, 6.8uH MCFT000174
Inductor, Ferrite, 1008, 10uH MCFT000175
Inductor, Ferrite, 1008, 15uH MCFT000176
Inductor, Ferrite, 1008, 22uH MCFT000177
Inductor, Ferrite, 1008, 33uH MCFT000178
Inductor, Ferrite, 1008, 47uH MCFT000179
Inductor, Ferrite, 1008, 68uH MCFT000180
Inductor, Ferrite, 1008, 100uH MCFT000181
Inductor, Ferrite, 1210, 1uH MCFT000182
Inductor, Ferrite, 1210, 1.5uH MCFT000183
Inductor, Ferrite, 1210, 2.2uH MCFT000184
Inductor, Ferrite, 1210, 3.3uH MCFT000185
Wound Chip Ferrite Inductors
Page <10> 18/05/09 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes
in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied.
The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data
sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage
resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded.
This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC Multicomp is the registered trademark of the Group. © Premier Farnell plc 2009.
Part Number Table
Description Part Number
Inductor, Ferrite, 1210, 4.7uH MCFT000186
Inductor, Ferrite, 1210, 6.8uH MCFT000187
Inductor, Ferrite, 1210, 10uH MCFT000188
Inductor, Ferrite, 1210, 15uH MCFT000189
Inductor, Ferrite, 1210, 22uH MCFT000190
Inductor, Ferrite, 1210, 33uH MCFT000191
Inductor, Ferrite, 1210, 47uH MCFT000192
Inductor, Ferrite, 1210, 68uH MCFT000193
Inductor, Ferrite, 1210, 100uH MCFT000194
Inductor, Ferrite, 1210, 150uH MCFT000195
Inductor, Ferrite, 1210, 220uH MCFT000196
Inductor, Ferrite, 1812, 1uH MCFT000197
Inductor, Ferrite, 1812, 1.5uH MCFT000198
Inductor, Ferrite, 1812, 2.2uH MCFT000199
Inductor, Ferrite, 1812, 3.3uH MCFT000200
Inductor, Ferrite, 1812, 4.7uH MCFT000201
Inductor, Ferrite, 1812, 6.8uH MCFT000202
Inductor, Ferrite, 1812, 10uH MCFT000203
Inductor, Ferrite, 1812, 15uH MCFT000204
Inductor, Ferrite, 1812, 22uH MCFT000205
Inductor, Ferrite, 1812, 33uH MCFT000206
Inductor, Ferrite, 1812, 47uH MCFT000207
Inductor, Ferrite, 1812, 68uH MCFT000208
Inductor, Ferrite, 1812, 100uH MCFT000209
Inductor, Ferrite, 1812, 150uH MCFT000210
Inductor, Ferrite, 1812, 220uH MCFT000211
Inductor, Ferrite, 1812, 330uH MCFT000212
Inductor, Ferrite, 1812, 470uH MCFT000213
Inductor, Ferrite, 1812, 680uH MCFT000214
