KEY APPLICATIONS
Pedestal and rackable servers
•Workstations
•Storage Area Networks (SANs)
Remote storage attach
RAID
JBOD connect
FEATURES
Low profile PCI form factor
•Auto-negotiation for legacy
connect (1 or 2 Gbit)
64-bit, 66 MHz host PCI bus
(backwards compatible with
32-bit and 33 MHz buses)
Multi-mode optics and
copper options
Concurrent SCSI and IP protocol
Supports target mode and
SCSI initiator, concurrently
•FC-Tape support
•CIM based server management
Supports all major
operating systems
Fusion-MPT™ architected
SANmark™ approved
•5 year limited warranty
SNIA HBA API compliant
LSI40919
2 Gbit Fibre Channel Host Adapter
LSI40919 ORDERING INFORMATION
LSI40919O Standard height bracket, LC, SFF, multi-mode optics
LSI40919LO Low profile bracket, LC, SFF, multi-mode optics
LSI40919H Standard height bracket, HSSDC, copper
NOTE: Switch, loop, and point-to-point topologies are supported.
A HIGH PERFORMANCE FIBRE CHANNEL SOLUTION
For a high performance, fibre channel solution with 2 Gbit speed, the
LSI Logic LSI40919 Fibre Channel MiniHABfamily of products is an ideal
solution. These single channel, 2 Gbit PCI-to-Fibre Channel adapters are
multi-purpose fibre channel adapters suitable for many applications needing
low cost fibre channel connectivity. Designed in a Low Profile PCI form factor,
these adapters are perfect for both rackmount and standard servers. The
LSI40919 adapters feature 2 Gbit performance for connecting to high
performance disk drives, RAID subsystems and JBOD mass storage systems.
The LSI40919 adapters host the LSIFC919 multi-function controller for its
PCI and fibre channel functionality creating a higher performance solution.
The host PCI interface is PCI 2.2 compliant and backwards compatible with
32-bit and 33 MHz buses.
FUSION-MPT ARCHITECTURE
Based on industry standard ARM®technology, the LSI Logic 2 Gbit product
family incorporates Fusion-MPT architecture, a single binary device driver for
Fibre Channel, SCSI and emerging interface technologies such as InfiniBand,
Serial ATA and others. Thinner drivers allow for better and more versatile
performance while adding value at the firmware level. Fusion-MPT provides
the flexibility and rich feature set to make options like Integrated Mirroring
possible for boot volume protection at no additional cost.
The LSI40919O Standard height
bracket, LC, SFF, multi-mode optics.
For more information please visit
the LSI Logic web sites at:
http://storageio.lsilogic.com
http://adapters.lsilogic.com
LSI Logic Corporation
North American Headquarters
Milpitas, CA
Tel: 866 574 5741 (within U.S)
408 954 3108 (outside U.S.)
Host Adapter Group
Southborough, MA
Tel: 888 429 0425
FAX: 508 485 0303
LSI Logic Europe Ltd.
European Headquarters
United Kingdom
Tel: 44 1344 426544
Fax: 44 1344 481039
LSI Logic KK Headquarters
Tokyo, Japan
Tel: 81 3 5463 7165
Fax 81 3 5463 7820
ISO 9001 Certified
The LSI Logic logo design and Fusion-MPT are
trademarks or registered trademarks of LSI Logic
Corporation. All other brand and product names
may be trademarks of their respective companies.
LSI Logic Corporation reserves the right to make
changes to any products and services herein at
any time without notice. LSI Logic does not assume
any responsibility or liability arising out of the
application or use of any product or service
described herein, except as expressly agreed to in
writing by LSI Logic; nor does the purchase, lease,
or use of a product or service from LSI Logic convey
a license under any patent rights, copyrights,
trademark rights, or any other of the intellectual
property rights of LSI Logic or of third parties.
Copyright ©2002 by LSI Logic Corporation.
All rights reserved.
Order No. S20058
12/02-1.5M – Printed in USA
2
Technical Specifications
Data Transfers 400 MBps, full-duplex
Protocols SCSI, IP
Topology Point-to-point, arbitrated loop, switched fabric (FL-port, F-port)
OS Support Windows NT4.0, Windows 2000, Solaris X86, SPARC, Linux, Novell
NetWare, UnixWare
Compliance ANSI Fibre Channel Standards: FC-PH, FC-AL2, FC-FCP, FC-PLDA,
FC-FLA, FCA-IP, IETF-IPFC, FC-Tape
PCI 2.2 and 99 compliant
Size 6.6” x 2.53”
PCI Form Factor Low profile, PCI 2.2, MD2
PCI Bus 64-bit, 66 MHz max (backwards compatible with 32-bit, 33 MHz buses)
PCI Modes Bus Master DMA
PCI Card Types Universal add-in card (3.3 V and 5.5 V signaling)
PCI Voltage +5 V ±5% (1.7 A max)
PCI Power 7.5 W
Bracket Standard height and low profile option
External Connectors LC, multi-mode optics, SFF, or HSSDC, copper
Agency Approvals CE, VCCI, Canada, C-Tick, FCC class B, UL 94VO
Environments Operating Storage
Temperature 0°C to 55°C -40°C to +85°C
Relative Humidity 5 to 90% non-condensing 0 to 90% non-condensing
Max Dew Point +32°C
MTBF = 87,600 hours or 10 years, which ever comes first
LSIFC919
FLASH
OSC
SSRAM
1MB
LEDs
LSI Logic Low Profile Solution
Optical Interface
Small Form Factor
FC2GB
The LSI40919 2 Gbit Fibre Channel adapters are ideal low cost, Fibre
Channel solutions suited for most applications.
LSI40919
2 Gbit Fibre Channel Host Adapter