Product family data sheet
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo,
XLamp® and SC5 Technology® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks,
or association.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
CLD-DS97 REV 4I
Cree® XLamp® XP-L LEDs
XP-L High Density LED XP-L High Intensity LED
PRODUCT DESCRIPTION
XLamp® XP-L LEDs are available in two
versions: High Density and High Intensity.
The XLamp XP-L High Density (HD) LED
is the highest performing discrete in
Cree’s High Density (HD) class of LEDs,
delivering the next generation of lumen
output and efcacy in the compact
3.45 mm x 3.45 mm XP footprint.
Cree’s HD LEDs, optimized to deliver
maximum lumen output in a small form
factor, enable lighting manufacturers
to improve the performance of any
lighting design, create smaller and less
expensive systems, and develop new
lighting solutions that were previously
not possible.
The XLamp XP-L High Intensity (HI) LED
is the rst of Cree’s new class of High
Intensity (HI) LEDs optimized to deliver
maximum candela through secondary
optics. Built on Cree’s breakthrough SC5
Technology® Platform, the XP-L HI LED
delivers 120 percent more candela than
the XP-L HD LED through the same optic.
The XP-L HI LED leverages the industry’s
highest single-die performance and a
new innovative primary optic design that
radically reduces the optical source size
to deliver both lumens and intensity.
FEATURES
• Available in white, 70-CRI white, 80-CRI
white, 85 CRI white and 90-CRI white
• ANSI-compatible chromaticity bins
• Binned at 85°C
• Maximum drive current: 3000mA
• Low thermal resistance: 2.2°C/W
• Wide viewing angle: 125° (XP-L High
Density), 115° (XP-L High Intensity)
• Unlimited oor life at
≤ 30ºC/85% RH
• Reow solderable - JEDEC J-STD-020C
• Electrically neutral thermal path
• RoHS and REACh compliant
• UL® recognized component (E349212)
TABLE OF CONTENTS
Characteristics ............................................2
Flux Characteristics - XP-L High Density ...3
Flux Characteristics - XP-L High Intensity .8
Relative Spectral Power Distribution ...... 12
Relative Flux vs. Junction Temperature .. 12
Electrical Characteristics ......................... 13
Relative Flux vs. Current .......................... 13
Relative Chromaticity vs. Current ............ 14
Relative Chromaticity vs. Temperature ... 15
Typical Spatial Distribution ...................... 16
Thermal Design ........................................ 16
Performance Groups – Luminous Flux... 17
Performance Groups – Chromaticity ...... 18
Cree’s Standard Chromaticity Regions
Plotted on the 1931 CIE Curve ................ 21
Cree’s Standard Cool White Kits Plotted
on ANSI Standard Chromaticity
Regions ..................................................... 23
Cree’s Standard Warm and Neutral
White Kits Plotted on ANSI Standard
Chromaticity Regions .............................. 24
Cree’s Standard Chromaticity Kits .......... 26
Bin and Order Code Formats ................... 27
Reow Soldering Characteristics ............ 28
Notes ........................................................ 29
Mechanical Dimensions .......................... 31
Tape and Reel ........................................... 33
Packaging ................................................. 35
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
2
XLamp® Xp-L LED
CHARACTERISTICS
Characteristics Unit Minimum Typical Maximum
Thermal resistance, junction to solder point °C/W 2.2
Viewing angle (FWHM) - XP-L High Density degrees 125
Viewing angle (FWHM) - XP-L High Intensity degrees 115
Temperature coefcient of voltage mV/°C -2
ESD withstand voltage (HBM per Mil-Std-883D) V 8000
DC forward current mA 3000
Reverse voltage V -5
Forward voltage (@ 1050mA, 85°C) V 2.95 3.25
LED junction temperature °C 150
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than
the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
3
XLamp® Xp-L LED
FLUX CHARACTERISTICS - XP-L HIGH DENSITY (TJ
The following table provides order codes for XLamp XP-L High Density LEDs. For a complete description of the order code nomenclature,
please see the Bin and Order Code Formats section (page 27). For denitions of the chromaticity kits, please see the Cree’s Standard
Chromaticity Kits section (page 26).
Chromaticity
Order Codes
Kit CCT Code
°C
65 CRI Typical 70 CRI Minimum
51 6200 K
V6 480 535 XPLAWT-00-0000-0000V6051 XPLAWT-00-0000-000BV6051
V5 460 513 XPLAWT-00-0000-0000V5051 XPLAWT-00-0000-000BV5051
V4 440 491 XPLAWT-00-0000-0000V4051 XPLAWT-00-0000-000BV4051
V3 420 468 XPLAWT-00-0000-0000V3051 XPLAWT-00-0000-000BV3051
V2 400 446 XPLAWT-00-0000-000BV2051
53 6000 K
V6 480 535 XPLAWT-00-0000-0000V6053 XPLAWT-00-0000-000BV6053
V5 460 513 XPLAWT-00-0000-0000V5053 XPLAWT-00-0000-000BV5053
V4 440 491 XPLAWT-00-0000-0000V4053 XPLAWT-00-0000-000BV4053
V3 420 468 XPLAWT-00-0000-0000V3053 XPLAWT-00-0000-000BV3053
V2 400 446 XPLAWT-00-0000-000BV2053
50 6200 K
V6 480 535 XPLAWT-00-0000-0000V6050 XPLAWT-00-0000-000BV6050
V5 460 513 XPLAWT-00-0000-0000V5050 XPLAWT-00-0000-000BV5050
V4 440 491 XPLAWT-00-0000-0000V4050 XPLAWT-00-0000-000BV4050
V3 420 468 XPLAWT-00-0000-0000V3050 XPLAWT-00-0000-000BV3050
V2 400 446 XPLAWT-00-0000-000BV2050
E1 6500 K
V6 480 535 XPLAWT-00-0000-0000V60E1 XPLAWT-00-0000-000BV60E1
V5 460 513 XPLAWT-00-0000-0000V50E1 XPLAWT-00-0000-000BV50E1
V4 440 491 XPLAWT-00-0000-0000V40E1 XPLAWT-00-0000-000BV40E1
V3 420 468 XPLAWT-00-0000-0000V30E1 XPLAWT-00-0000-000BV30E1
V2 400 446 XPLAWT-00-0000-000BV20E1
E2 5700 K
V6 480 535 XPLAWT-00-0000-0000V60E2 XPLAWT-00-0000-000BV60E2
V5 460 513 XPLAWT-00-0000-0000V50E2 XPLAWT-00-0000-000BV50E2
V4 440 491 XPLAWT-00-0000-0000V40E2 XPLAWT-00-0000-000BV40E2
V3 420 468 XPLAWT-00-0000-000BV30E2
V2 400 446 XPLAWT-00-0000-000BV20E2
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than
the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
4
XLamp® Xp-L LED
Chromaticity
Order Codes
Kit CCT Code
°C
70 CRI Minimum 75 CRI Typical 80 CRI Minimum
E3 5000 K
V6 480 535 XPLAWT-00-0000-000BV60E3
V5 460 513 XPLAWT-00-0000-000BV50E3 XPLAWT-00-0000-000LV50E3
V4 440 491 XPLAWT-00-0000-000BV40E3 XPLAWT-00-0000-000LV40E3
V3 420 468 XPLAWT-00-0000-000BV30E3 XPLAWT-00-0000-000LV30E3
V2 400 446 XPLAWT-00-0000-000BV20E3 XPLAWT-00-0000-000LV20E3
F4 4750 K
V6 480 535 XPLAWT-00-0000-000BV60F4
V5 460 513 XPLAWT-00-0000-000BV50F4 XPLAWT-00-0000-000LV50F4
V4 440 491 XPLAWT-00-0000-000BV40F4 XPLAWT-00-0000-000LV40F4
V3 420 468 XPLAWT-00-0000-000BV30F4 XPLAWT-00-0000-000LV30F4
V2 400 446 XPLAWT-00-0000-000BV20F4 XPLAWT-00-0000-000LV20F4
E4 4500 K
V6 480 535 XPLAWT-00-0000-000BV60E4
V5 460 513 XPLAWT-00-0000-000BV50E4 XPLAWT-00-0000-000LV50E4
V4 440 491 XPLAWT-00-0000-000BV40E4 XPLAWT-00-0000-000LV40E4
V3 420 468 XPLAWT-00-0000-000BV30E4 XPLAWT-00-0000-000LV30E4
V2 400 446 XPLAWT-00-0000-000BV20E4 XPLAWT-00-0000-000LV20E4
F5 4250 K
V6 480 535 XPLAWT-00-0000-000BV60F5
V5 460 513 XPLAWT-00-0000-000BV50F5 XPLAWT-00-0000-000LV50F5
V4 440 491 XPLAWT-00-0000-000BV40F5 XPLAWT-00-0000-000LV40F5
V3 420 468 XPLAWT-00-0000-000BV30F5 XPLAWT-00-0000-000LV30F5
V2 400 446 XPLAWT-00-0000-000BV20F5 XPLAWT-00-0000-000LV20F5
E5 4000 K
V6 480 535 XPLAWT-00-0000-000BV60E5
V5 460 513 XPLAWT-00-0000-000BV50E5
V4 440 491 XPLAWT-00-0000-000BV40E5 XPLAWT-00-0000-000LV40E5 XPLAWT-00-0000-000HV40E5
V3 420 468 XPLAWT-00-0000-000BV30E5 XPLAWT-00-0000-000LV30E5 XPLAWT-00-0000-000HV30E5
V2 400 446 XPLAWT-00-0000-000BV20E5 XPLAWT-00-0000-000LV20E5 XPLAWT-00-0000-000HV20E5
U6 380 424 XPLAWT-00-0000-000BU60E5 XPLAWT-00-0000-000LU60E5 XPLAWT-00-0000-000HU60E5
U5 360 401 XPLAWT-00-0000-000HU50E5
Z5 4000 K
V4 440 491 XPLAWT-00-0000-000BV40Z5 XPLAWT-00-0000-000LV40Z5 XPLAWT-00-0000-000HV40Z5
V3 420 468 XPLAWT-00-0000-000BV30Z5 XPLAWT-00-0000-000LV30Z5 XPLAWT-00-0000-000HV30Z5
V2 400 446 XPLAWT-00-0000-000BV20Z5 XPLAWT-00-0000-000LV20Z5 XPLAWT-00-0000-000HV20Z5
U6 380 424 XPLAWT-00-0000-000BU60Z5 XPLAWT-00-0000-000LU60Z5 XPLAWT-00-0000-000HU60Z5
U5 360 401 XPLAWT-00-0000-000HU50Z5
FLUX CHARACTERISTICS - XP-L HIGH DENSITY (TJ
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than
the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
5
XLamp® Xp-L LED
Chromaticity
Order Codes
Kit CCT Code
°C
70 CRI Minimum 75 CRI Typical 80 CRI Minimum
F6 3700 K
V4 440 491 XPLAWT-00-0000-000HV40F6
V3 420 468 XPLAWT-00-0000-000LV30F6 XPLAWT-00-0000-000HV30F6
V2 400 446 XPLAWT-00-0000-000LV20F6 XPLAWT-00-0000-000HV20F6
U6 380 424 XPLAWT-00-0000-000LU60F6 XPLAWT-00-0000-000HU60F6
U5 360 401 XPLAWT-00-0000-000LU50F6 XPLAWT-00-0000-000HU50F6
Chromaticity Minimum Luminous
Order Codes
Kit CCT Code
Flux
°C
Flux
80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
E6 3500 K
V3 420 468 XPLAWT-00-0000-
000LV30E6
XPLAWT-00-0000-
000HV30E6
V2 400 446 XPLAWT-00-0000-
000LV20E6
XPLAWT-00-0000-
000HV20E6
U6 380 424 XPLAWT-00-0000-
000LU60E6
XPLAWT-00-0000-
000HU60E6
U5 360 401 XPLAWT-00-0000-
000LU50E6
XPLAWT-00-0000-
000HU50E6
Z6 3500 K
V2 400 446 XPLAWT-00-0000-
000LV20Z6
XPLAWT-00-0000-
000HV20Z6
U6 380 424 XPLAWT-00-0000-
000LU60Z6
XPLAWT-00-0000-
000HU60Z6
U5 360 401 XPLAWT-00-0000-
000LU50Z6
XPLAWT-00-0000-
000HU50Z6
F7 3250 K
V2 400 446 XPLAWT-00-0000-
000LV20F7
XPLAWT-00-0000-
000HV20F7
U6 380 424 XPLAWT-00-0000-
000LU60F7
XPLAWT-00-0000-
000HU60F7
U5 360 401 XPLAWT-00-0000-
000LU50F7
XPLAWT-00-0000-
000HU50F7
U4 340 379 XPLAWT-00-0000-
000LU40F7
XPLAWT-00-0000-
000HU40F7
FLUX CHARACTERISTICS - XP-L HIGH DENSITY (TJ
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than
the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
6
XLamp® Xp-L LED
Chromaticity Minimum Luminous
Order Codes
Kit CCT Code
Flux
°C
Flux
80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
E7 3000 K
V2 400 446 XPLAWT-00-0000-
000LV20E7
XPLAWT-00-0000-
000HV20E7
U6 380 424 XPLAWT-00-0000-
000LU60E7
XPLAWT-00-0000-
000HU60E7
U5 360 401 XPLAWT-00-0000-
000LU50E7
XPLAWT-00-0000-
000HU50E7
U4 340 379 XPLAWT-00-0000-
000LU40E7
XPLAWT-00-0000-
000HU40E7
U3 320 357 XPLAWT-00-0000-
000PU30E7
XPLAWT-00-0000-
000UU30E7
U2 300 334 XPLAWT-00-0000-
000PU20E7
XPLAWT-00-0000-
000UU20E7
T6 280 312 XPLAWT-00-0000-
000PT60E7
XPLAWT-00-0000-
000UT60E7
Z7 3000 K
U6 380 424 XPLAWT-00-0000-
000LU60Z7
XPLAWT-00-0000-
000HU60Z7
U5 360 401 XPLAWT-00-0000-
000LU50Z7
XPLAWT-00-0000-
000HU50Z7
U4 340 379 XPLAWT-00-0000-
000LU40Z7
XPLAWT-00-0000-
000HU40Z7
U3 320 357 XPLAWT-00-0000-
000PU30Z7
XPLAWT-00-0000-
000UU30Z7
U2 300 334 XPLAWT-00-0000-
000PU20Z7
XPLAWT-00-0000-
000UU20Z7
T6 280 312 XPLAWT-00-0000-
000PT60Z7
XPLAWT-00-0000-
000UT60Z7
F8 2850 K
V2 400 446 XPLAWT-00-0000-
000LV20F8
U6 380 424 XPLAWT-00-0000-
000LU60F8
XPLAWT-00-0000-
000HU60F8
U5 360 401 XPLAWT-00-0000-
000LU50F8
XPLAWT-00-0000-
000HU50F8
U4 340 379 XPLAWT-00-0000-
000LU40F8
XPLAWT-00-0000-
000HU40F8
U3 320 357 XPLAWT-00-0000-
000PU30F8
XPLAWT-00-0000-
000UU30F8
U2 300 334 XPLAWT-00-0000-
000PU20F8
XPLAWT-00-0000-
000UU20F8
T6 280 312 XPLAWT-00-0000-
000PT60F8
XPLAWT-00-0000-
000UT60F8
T5 260 290 XPLAWT-00-0000-
000PT50F8
XPLAWT-00-0000-
000UT50F8
FLUX CHARACTERISTICS - XP-L HIGH DENSITY (TJ
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than
the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
7
XLamp® Xp-L LED
Chromaticity Minimum Luminous
Order Codes
Kit CCT Code
Flux
°C
Flux
80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
E8 2700 K
V2 400 446 XPLAWT-00-0000-
000LV20E8
U6 380 424 XPLAWT-00-0000-
000LU60E8
XPLAWT-00-0000-
000HU60E8
U5 360 401 XPLAWT-00-0000-
000LU50E8
XPLAWT-00-0000-
000HU50E8
U4 340 379 XPLAWT-00-0000-
000LU40E8
XPLAWT-00-0000-
000HU40E8
U3 320 357 XPLAWT-00-0000-
000PU30E8
XPLAWT-00-0000-
000UU30E8
U2 300 334 XPLAWT-00-0000-
000PU20E8
XPLAWT-00-0000-
000UU20E8
T6 280 312 XPLAWT-00-0000-
000PT60E8
XPLAWT-00-0000-
000UT60E8
T5 260 290 XPLAWT-00-0000-
000PT50E8
XPLAWT-00-0000-
000UT50E8
Z8 2700 K
U6 380 424 XPLAWT-00-0000-
000LU60Z8
U5 360 401 XPLAWT-00-0000-
000LU50Z8
XPLAWT-00-0000-
000HU50Z8
U4 340 379 XPLAWT-00-0000-
000LU40Z8
XPLAWT-00-0000-
000HU40Z8
U3 320 357
U2 300 334 XPLAWT-00-0000-
000PU20Z8
XPLAWT-00-0000-
000UU20Z8
T6 280 312 XPLAWT-00-0000-
000PT60Z8
XPLAWT-00-0000-
000UT60Z8
T5 260 290 XPLAWT-00-0000-
000PT50Z8
XPLAWT-00-0000-
000UT50Z8
FLUX CHARACTERISTICS - XP-L HIGH DENSITY (TJ
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than
the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
8
XLamp® Xp-L LED
FLUX CHARACTERISTICS - XP-L HIGH INTENSITY (TJ
The following table provides order codes for XLamp XP-L High Intensity LEDs. For a complete description of the order code nomenclature,
please see the Bin and Order Code Formats section (page 27). For denitions of the chromaticity kits, please see the Cree’s Standard
Chromaticity Kits section (page 26).
Chromaticity
Order Codes
Kit CCT Code
°C
65 CRI Typical 70 CRI Minimum
51 6200 K
V2 400 446 XPLAWT-H0-0000-0000V2051 XPLAWT-H0-0000-000BV2051
U6 380 424 XPLAWT-H0-0000-0000U6051 XPLAWT-H0-0000-000BU6051
U5 360 401 XPLAWT-H0-0000-0000U5051 XPLAWT-H0-0000-000BU5051
53 6000 K
V2 400 446 XPLAWT-H0-0000-0000V2053 XPLAWT-H0-0000-000BV2053
U6 380 424 XPLAWT-H0-0000-0000U6053 XPLAWT-H0-0000-000BU6053
U5 360 401 XPLAWT-H0-0000-0000U5053 XPLAWT-H0-0000-000BU5053
50 6200 K
V2 400 446 XPLAWT-H0-0000-0000V2050 XPLAWT-H0-0000-000BV2050
U6 380 424 XPLAWT-H0-0000-0000U6050 XPLAWT-H0-0000-000BU6050
U5 360 401 XPLAWT-H0-0000-0000U5050 XPLAWT-H0-0000-000BU5050
E1 6500 K
V2 400 446 XPLAWT-H0-0000-0000V20E1 XPLAWT-H0-0000-000BV20E1
U6 380 424 XPLAWT-H0-0000-0000U60E1 XPLAWT-H0-0000-000BU60E1
U5 360 401 XPLAWT-H0-0000-0000U50E1 XPLAWT-H0-0000-000BU50E1
E2 5700 K
V2 400 446 XPLAWT-H0-0000-0000V20E2 XPLAWT-H0-0000-000BV20E2
U6 380 424 XPLAWT-H0-0000-0000U60E2 XPLAWT-H0-0000-000BU60E2
U5 360 401 XPLAWT-H0-0000-0000U50E2 XPLAWT-H0-0000-000BU50E2
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than
the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
9
XLamp® Xp-L LED
Chromaticity
Order Codes
Kit CCT Code
°C
70 CRI Minimum 75 CRI Typical 80 CRI Minimum
E3 5000 K
V2 400 446 XPLAWT-H0-0000-000BV20E3 XPLAWT-H0-0000-000LV20E3
U6 380 424 XPLAWT-H0-0000-000BU60E3 XPLAWT-H0-0000-000LU60E3
U5 360 401 XPLAWT-H0-0000-000BU50E3 XPLAWT-H0-0000-000LU50E3
F4 4750 K
V2 400 446 XPLAWT-H0-0000-000BV20F4 XPLAWT-H0-0000-000LV20F4
U6 380 424 XPLAWT-H0-0000-000BU60F4 XPLAWT-H0-0000-000LU60F4
U5 360 401 XPLAWT-H0-0000-000BU50F4 XPLAWT-H0-0000-000LU50F4
E4 4500 K
V2 400 446 XPLAWT-H0-0000-000BV20E4 XPLAWT-H0-0000-000LV20E4
U6 380 424 XPLAWT-H0-0000-000BU60E4 XPLAWT-H0-0000-000LU60E4
U5 360 401 XPLAWT-H0-0000-000BU50E4 XPLAWT-H0-0000-000LU50E4
F5 4250 K
V2 400 446 XPLAWT-H0-0000-000BV20F5 XPLAWT-H0-0000-000LV20F5
U6 380 424 XPLAWT-H0-0000-000BU60F5 XPLAWT-H0-0000-000LU60F5
U5 360 401 XPLAWT-H0-0000-000BU50F5 XPLAWT-H0-0000-000LU50F5
E5 4000 K
V2 400 446 XPLAWT-H0-0000-000BV20E5 XPLAWT-H0-0000-000LV20E5
U6 380 424 XPLAWT-H0-0000-000BU60E5 XPLAWT-H0-0000-000LU60E5 XPLAWT-H0-0000-000HU60E5
U5 360 401 XPLAWT-H0-0000-000BU50E5 XPLAWT-H0-0000-000LU50E5 XPLAWT-H0-0000-000HU50E5
U4 340 379 XPLAWT-H0-0000-000BU40E5 XPLAWT-H0-0000-000LU40E5 XPLAWT-H0-0000-000HU40E5
F6 3700 K
U5 360 401 XPLAWT-H0-0000-000LU50F6 XPLAWT-H0-0000-000HU50F6
U4 340 379 XPLAWT-H0-0000-000LU40F6 XPLAWT-H0-0000-000HU40F6
U3 320 357 XPLAWT-H0-0000-000LU30F6 XPLAWT-H0-0000-000HU30F6
FLUX CHARACTERISTICS - XP-L HIGH INTENSITY (TJ
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than
the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
10
XLamp® Xp-L LED
Chromaticity Minimum Luminous Flux
Order Codes
Kit CCT Code
Flux
°C
Flux
80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
E6 3500 K
U5 360 401 XPLAWT-H0-0000-
000LU50E6
XPLAWT-H0-0000-
000HU50E6
U4 340 379 XPLAWT-H0-0000-
000LU40E6
XPLAWT-H0-0000-
000HU40E6
U3 320 357 XPLAWT-H0-0000-
000LU30E6
XPLAWT-H0-0000-
000HU30E6
F7 3250 K
U4 340 379 XPLAWT-H0-0000-
000LU40F7
XPLAWT-H0-0000-
000HU40F7
U3 320 357 XPLAWT-H0-0000-
000LU30F7
XPLAWT-H0-0000-
000HU30F7
U2 300 334 XPLAWT-H0-0000-
000LU20F7
XPLAWT-H0-0000-
000HU20F7
E7 3000 K
U4 340 379 XPLAWT-H0-0000-
000LU40E7
XPLAWT-H0-0000-
000HU40E7
U3 320 357 XPLAWT-H0-0000-
000LU30E7
XPLAWT-H0-0000-
000HU30E7
U2 300 334 XPLAWT-H0-0000-
000LU20E7
XPLAWT-H0-0000-
000HU20E7
T6 280 312 XPLAWT-H0-0000-
000PT60E7
XPLAWT-H0-0000-
000UT60E7
T5 260 290 XPLAWT-H0-0000-
000PT50E7
XPLAWT-H0-0000-
000UT50E7
T4 240 268 XPLAWT-H0-0000-
000PT40E7
XPLAWT-H0-0000-
000UT40E7
F8 2850 K
U4 340 379 XPLAWT-H0-0000-
000LU40F8
XPLAWT-H0-0000-
000HU40F8
U3 320 357 XPLAWT-H0-0000-
000LU30F8
XPLAWT-H0-0000-
000HU30F8
U2 300 334 XPLAWT-H0-0000-
000LU20F8
XPLAWT-H0-0000-
000HU20F8
T6 280 312 XPLAWT-H0-0000-
000PT60F8
T5 260 290 XPLAWT-H0-0000-
000PT50F8
XPLAWT-H0-0000-
000UT50F8
T4 240 268 XPLAWT-H0-0000-
000PT40F8
XPLAWT-H0-0000-
000UT40F8
T3 220 245 XPLAWT-H0-0000-
000PT30F8
FLUX CHARACTERISTICS - XP-L HIGH INTENSITY (TJ
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than
the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
11
XLamp® Xp-L LED
Chromaticity Minimum Luminous Flux
Order Codes
Kit CCT Code
Flux
°C
Flux
80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
E8 2700 K
U4 340 379 XPLAWT-H0-0000-
000LU40E8
U3 320 357 XPLAWT-H0-0000-
000LU30E8
XPLAWT-H0-0000-
000HU30E8
U2 300 334 XPLAWT-H0-0000-
000LU20E8
XPLAWT-H0-0000-
000HU20E8
T6 280 312 XPLAWT-H0-0000-
000PT60E8
T5 260 290 XPLAWT-H0-0000-
000PT50E8
XPLAWT-H0-0000-
000UT50E8
T4 240 268 XPLAWT-H0-0000-
000PT40E8
XPLAWT-H0-0000-
000UT40E8
T3 220 245 XPLAWT-H0-0000-
000PT30E8
FLUX CHARACTERISTICS - XP-L HIGH INTENSITY (TJ
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
12
XLamp® Xp-L LED
RELATIVE SPECTRAL POWER DISTRIBUTION
RELATIVE FLUX VS. JUNCTION TEMPERATURE (IF m
Relative Spectral Power
0
20
40
60
80
100
380 430 480 530 580 630 680 730 780
Relative Radiant Power (%)
Wavelength (nm)
5000 K - 8300 K CCT
3700 K - 5000 K CCT
2600 K - 3700 K CCT
Relative Flux Output vs. Junction Temperature
0
20
40
60
80
100
120
25 50 75 100 125 150
Relative Luminous Flux (%)
Junction Temperature (ºC)
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
13
XLamp® Xp-L LED
ELECTRICAL CHARACTERISTICS (TJ
RELATIVE FLUX VS. CURRENT (TJ
Electrical Characteristics (Tj = 85°C)
0
500
1000
1500
2000
2500
3000
2.6 2.8 3.0 3.2 3.4
Forward Current (mA)
Forward Voltage (V)
Relative Intensity vs. Current (Tj = 85°C)
0
50
100
150
200
250
0 500 1000 1500 2000 2500 3000
Relative Luminous Flux (%)
Forward Current (mA)
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
14
XLamp® Xp-L LED
Relative Chromaticity Vs. Current, HD
-0.020
-0.016
-0.012
-0.008
-0.004
0.000
0.004
0.008
0.012
0.016
0.020
0 500 1000 1500 2000 2500 3000
Current (mA)
ΔCCx
ΔCCy
XP-L High Density
Relative Chromaticity Vs. Current, HI
-0.020
-0.016
-0.012
-0.008
-0.004
0.000
0.004
0.008
0.012
0.016
0.020
0 500 1000 1500 2000 2500 3000
Current (mA)
ΔCCx
ΔCCy
XP-L High Intensity
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
15
XLamp® Xp-L LED
Relative Chromaticity Vs. Temperature, HD
-0.020
-0.016
-0.012
-0.008
-0.004
0.000
0.004
0.008
0.012
0.016
0.020
25 50 75 100 125 150
Tsp (°C)
ΔCCx
ΔCCy
XP-L High Density
Relative Chromaticity Vs. Temperature, HI
-0.020
-0.016
-0.012
-0.008
-0.004
0.000
0.004
0.008
0.012
0.016
0.020
25 50 75 100 125 150
Tsp (°C)
ΔCCx
ΔCCy
XP-L High Intensity
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
16
XLamp® Xp-L LED
TYPICAL SPATIAL DISTRIBUTION
THERMAL DESIGN
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
Typical Spatial Radiation Pattern
0
20
40
60
80
100
-90 -70 -50 -30 -10 10 30 50 70 90
Relative Luminous Intensity (%)
Angle (º)
XP-L High Density
XP-L High Intensity
Thermal Design
Cool White
0
500
1000
1500
2000
2500
3000
3500
0 20 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 4°C/W
Rj-a = 7°C/W
Rj-a = 10°C/W
Rj-a = 15°C/W
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
17
XLamp® Xp-L LED
PERFORMANCE GROUPS – LUMINOUS FLUX
XLamp XP-L LEDs are tested for luminous ux and placed into one of the following luminous-ux groups:
Group Code Minimum Luminous Flux
Maximum Luminous Flux
T3 220 240
T4 240 260
T5 260 280
T6 280 300
U2 300 320
U3 320 340
U4 340 360
U5 360 380
U6 380 400
V2 400 420
V3 420 440
V4 440 460
V5 460 480
V6 480 500
W2 500 520
W3 520 540
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
18
XLamp® Xp-L LED
PERFORMANCE GROUPS – CHROMATICITY
Region x y Region x y Region x y Region x y
0A
0.2950 0.2970
0B
0.2920 0.3060
0C
0.2984 0.3133
0D
0.2984 0.3133
0.2920 0.3060 0.2895 0.3135 0.2962 0.3220 0.3048 0.3207
0.2984 0.3133 0.2962 0.3220 0.3028 0.3304 0.3068 0.3113
0.3009 0.3042 0.2984 0.3133 0.3048 0.3207 0.3009 0.3042
0R
0.2980 0.2880
0S
0.2895 0.3135
0T
0.2962 0.3220
0U
0.3037 0.2937
0.2950 0.2970 0.2870 0.3210 0.2937 0.3312 0.3009 0.3042
0.3009 0.3042 0.2937 0.3312 0.3005 0.3415 0.3068 0.3113
0.3037 0.2937 0.2962 0.3220 0.3028 0.3304 0.3093 0.2993
1A
0.3048 0.3207
1B
0.3028 0.3304
1C
0.3115 0.3391
1D
0.3130 0.3290
0.3130 0.3290 0.3115 0.3391 0.3205 0.3481 0.3213 0.3373
0.3144 0.3186 0.3130 0.3290 0.3213 0.3373 0.3221 0.3261
0.3068 0.3113 0.3048 0.3207 0.3130 0.3290 0.3144 0.3186
1R
0.3068 0.3113
1S
0.3005 0.3415
1T
0.3099 0.3509
1U
0.3144 0.3186
0.3144 0.3186 0.3099 0.3509 0.3196 0.3602 0.3221 0.3261
0.3161 0.3059 0.3115 0.3391 0.3205 0.3481 0.3231 0.3120
0.3093 0.2993 0.3028 0.3304 0.3115 0.3391 0.3161 0.3059
2A
0.3215 0.3350
2B
0.3207 0.3462
2C
0.3290 0.3538
2D
0.3290 0.3417
0.3290 0.3417 0.3290 0.3538 0.3376 0.3616 0.3371 0.3490
0.3290 0.3300 0.3290 0.3417 0.3371 0.3490 0.3366 0.3369
0.3222 0.3243 0.3215 0.3350 0.3290 0.3417 0.3290 0.3300
2R
0.3222 0.3243
2S
0.3196 0.3602
2T
0.3290 0.3690
2U
0.3290 0.3300
0.3290 0.3300 0.3290 0.3690 0.3381 0.3762 0.3366 0.3369
0.3290 0.3180 0.3290 0.3538 0.3376 0.3616 0.3361 0.3245
0.3231 0.3120 0.3207 0.3462 0.3290 0.3538 0.3290 0.3180
3A
0.3371 0.3490
3B
0.3376 0.3616
3R
0.3366 0.3369
3S
0.3381 0.3762
0.3451 0.3554 0.3463 0.3687 0.3440 0.3428 0.3480 0.3840
0.3440 0.3427 0.3451 0.3554 0.3429 0.3307 0.3463 0.3687
0.3366 0.3369 0.3371 0.3490 0.3361 0.3245 0.3376 0.3616
4A
0.3530 0.3597
4B
0.3548 0.3736
4C
0.3641 0.3804
4D
0.3615 0.3659
0.3615 0.3659 0.3641 0.3804 0.3736 0.3874 0.3702 0.3722
0.3590 0.3521 0.3615 0.3659 0.3702 0.3722 0.3670 0.3578
0.3512 0.3465 0.3530 0.3597 0.3615 0.3659 0.3590 0.3521
4R
0.3512 0.3465
4S
0.3571 0.3907
4T
0.3668 0.3957
4U
0.3590 0.3521
0.3590 0.3521 0.3668 0.3957 0.3771 0.4034 0.3670 0.3578
0.3567 0.3389 0.3641 0.3804 0.3736 0.3874 0.3640 0.3440
0.3495 0.3339 0.3548 0.3736 0.3641 0.3804 0.3567 0.3389
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
19
XLamp® Xp-L LED
Region x y Region x y Region x y Region x y
5A1
0.3670 0.3578
5A2
0.3686 0.3649
5A3
0.3744 0.3685
5A4
0.3726 0.3612
0.3686 0.3649 0.3702 0.3722 0.3763 0.3760 0.3744 0.3685
0.3744 0.3685 0.3763 0.3760 0.3825 0.3798 0.3804 0.3721
0.3726 0.3612 0.3744 0.3685 0.3804 0.3721 0.3783 0.3646
5B1
0.3702 0.3722
5B2
0.3719 0.3797
5B3
0.3782 0.3837
5B4
0.3763 0.3760
0.3719 0.3797 0.3736 0.3874 0.3802 0.3916 0.3782 0.3837
0.3782 0.3837 0.3802 0.3916 0.3869 0.3958 0.3847 0.3877
0.3763 0.3760 0.3782 0.3837 0.3847 0.3877 0.3825 0.3798
5C1
0.3825 0.3798
5C2
0.3847 0.3877
5C3
0.3912 0.3917
5C4
0.3887 0.3836
0.3847 0.3877 0.3869 0.3958 0.3937 0.4001 0.3912 0.3917
0.3912 0.3917 0.3937 0.4001 0.4006 0.4044 0.3978 0.3958
0.3887 0.3836 0.3912 0.3917 0.3978 0.3958 0.3950 0.3875
5D1
0.3783 0.3646
5D2
0.3804 0.3721
5D3
0.3863 0.3758
5D4
0.3840 0.3681
0.3804 0.3721 0.3825 0.3798 0.3887 0.3836 0.3863 0.3758
0.3863 0.3758 0.3887 0.3836 0.3950 0.3875 0.3924 0.3794
0.3840 0.3681 0.3863 0.3758 0.3924 0.3794 0.3898 0.3716
6A1
0.3889 0.3690
6A2
0.3915 0.3768
6A3
0.3981 0.3800
6A4
0.3953 0.3720
0.3915 0.3768 0.3941 0.3848 0.4010 0.3882 0.3981 0.3800
0.3981 0.3800 0.4010 0.3882 0.4080 0.3916 0.4048 0.3832
0.3953 0.3720 0.3981 0.3800 0.4048 0.3832 0.4017 0.3751
6B1
0.3941 0.3848
6B2
0.3968 0.3930
6B3
0.4040 0.3966
6B4
0.4010 0.3882
0.3968 0.3930 0.3996 0.4015 0.4071 0.4052 0.4040 0.3966
0.4040 0.3966 0.4071 0.4052 0.4146 0.4089 0.4113 0.4001
0.4010 0.3882 0.4040 0.3966 0.4113 0.4001 0.4080 0.3916
6C1
0.4080 0.3916
6C2
0.4113 0.4001
6C3
0.4186 0.4037
6C4
0.4150 0.3950
0.4113 0.4001 0.4146 0.4089 0.4222 0.4127 0.4186 0.4037
0.4186 0.4037 0.4222 0.4127 0.4299 0.4165 0.4259 0.4073
0.4150 0.3950 0.4186 0.4037 0.4259 0.4073 0.4221 0.3984
6D1
0.4017 0.3751
6D2
0.4048 0.3832
6D3
0.4116 0.3865
6D4
0.4082 0.3782
0.4048 0.3832 0.4080 0.3916 0.4150 0.3950 0.4116 0.3865
0.4116 0.3865 0.4150 0.3950 0.4221 0.3984 0.4183 0.3898
0.4082 0.3782 0.4116 0.3865 0.4183 0.3898 0.4147 0.3814
7A1
0.4147 0.3814
7A2
0.4183 0.3898
7A3
0.4242 0.3919
7A4
0.4203 0.3833
0.4183 0.3898 0.4221 0.3984 0.4281 0.4006 0.4242 0.3919
0.4242 0.3919 0.4281 0.4006 0.4342 0.4028 0.4300 0.3939
0.4203 0.3833 0.4242 0.3919 0.4300 0.3939 0.4259 0.3853
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
20
XLamp® Xp-L LED
Region x y Region x y Region x y Region x y
7B1
0.4221 0.3984
7B2
0.4259 0.4073
7B3
0.4322 0.4096
7B4
0.4281 0.4006
0.4259 0.4073 0.4299 0.4165 0.4364 0.4188 0.4322 0.4096
0.4322 0.4096 0.4364 0.4188 0.4430 0.4212 0.4385 0.4119
0.4281 0.4006 0.4322 0.4096 0.4385 0.4119 0.4342 0.4028
7C1
0.4342 0.4028
7C2
0.4385 0.4119
7C3
0.4449 0.4141
7C4
0.4403 0.4049
0.4385 0.4119 0.4430 0.4212 0.4496 0.4236 0.4449 0.4141
0.4449 0.4141 0.4496 0.4236 0.4562 0.4260 0.4513 0.4164
0.4403 0.4049 0.4449 0.4141 0.4513 0.4164 0.4465 0.4071
7D1
0.4259 0.3853
7D2
0.4300 0.3939
7D3
0.4359 0.3960
7D4
0.4316 0.3873
0.4300 0.3939 0.4342 0.4028 0.4403 0.4049 0.4359 0.3960
0.4359 0.3960 0.4403 0.4049 0.4465 0.4071 0.4418 0.3981
0.4316 0.3873 0.4359 0.3960 0.4418 0.3981 0.4373 0.3893
8A1
0.4373 0.3893
8A2
0.4418 0.3981
8A3
0.4475 0.3994
8A4
0.4428 0.3906
0.4418 0.3981 0.4465 0.4071 0.4523 0.4085 0.4475 0.3994
0.4475 0.3994 0.4523 0.4085 0.4582 0.4099 0.4532 0.4008
0.4428 0.3906 0.4475 0.3994 0.4532 0.4008 0.4483 0.3919
8B1
0.4465 0.4071
8B2
0.4513 0.4164
8B3
0.4573 0.4178
8B4
0.4523 0.4085
0.4513 0.4164 0.4562 0.4260 0.4624 0.4274 0.4573 0.4178
0.4573 0.4178 0.4624 0.4274 0.4687 0.4289 0.4634 0.4193
0.4523 0.4085 0.4573 0.4178 0.4634 0.4193 0.4582 0.4099
8C1
0.4582 0.4099
8C2
0.4634 0.4193
8C3
0.4695 0.4207
8C4
0.4641 0.4112
0.4634 0.4193 0.4687 0.4289 0.4750 0.4304 0.4695 0.4207
0.4695 0.4207 0.4750 0.4304 0.4813 0.4319 0.4756 0.4221
0.4641 0.4112 0.4695 0.4207 0.4756 0.4221 0.4700 0.4126
8D1
0.4483 0.3919
8D2
0.4532 0.4008
8D3
0.4589 0.4021
8D4
0.4538 0.3931
0.4532 0.4008 0.4582 0.4099 0.4641 0.4112 0.4589 0.4021
0.4589 0.4021 0.4641 0.4112 0.4700 0.4126 0.4646 0.4034
0.4538 0.3931 0.4589 0.4021 0.4646 0.4034 0.4593 0.3944
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
21
XLamp® Xp-L LED
CREE’S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE
ANSI Cool White
Neutral White
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
3500 K
4000 K
4500 K
5000 K
3A
3B
3C
3D
4A
4B
4C
4D
3R
3S
3T
3U
4R
4S
4T
4U
5R
5S
5T
5U
5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D4 6A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4
6R
6S
6T
6U
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
CCy
CCx
ANSI
C78.377A
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
22
XLamp® Xp-L LED
CREE’S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE - CONTINUED
ANSI Neutral White and ANSI Warm White
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
3A
3B
3C
3D
4A
4B
4C
4D 5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D46A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4
7A1
7A2 7A3
7A4
7B1
7B2 7B3
7B4 7C1
7C2 7C3
7C4
7D1
7D2 7D3
7D48A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D28D3
8D4
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI
C78.377A
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
23
XLamp® Xp-L LED
CREE’S STANDARD COOL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
50
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
51
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
53
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
E1
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
E2
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
24
XLamp® Xp-L LED
CREE’S STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
3A
3B
3C
3D
4A
4B
4C
4D 5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D4 6A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4 7A1
7A2 7A3
7A4
7B1
7B2 7B3
7B4 7C1
7C2 7C3
7C4
7D1
7D2 7D3
7D4 8A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D2 8D3
8D4
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI
C78.377A
E3
E4
E5
E6
E8
E7
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
3A
3B
3C
3D
4A
4B
4C
4D 5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D4 6A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4 7A1
7A2 7A3
7A4
7B1
7B2 7B3
7B4 7C1
7C2 7C3
7C4
7D1
7D2 7D3
7D4 8A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D2 8D3
8D4
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI
C78.377A
F4
F6
F7
F5
F8
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
25
XLamp® Xp-L LED
CREE’S STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS -
CONTINUED
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
3A
3B
3C
3D
4A
4B
4C
4D 5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D4 6A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4 7A1
7A2 7A3
7A4
7B1
7B2 7B3
7B4 7C1
7C2 7C3
7C4
7D1
7D2 7D3
7D4 8A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D2 8D3
8D4
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI
C78.377A
Z6
Z7
Z5
Z8
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
26
XLamp® Xp-L LED
CREE’S STANDARD CHROMATICITY KITS
The following table provides the chromaticity bins associated with chromaticity kits.
Color CCT Kit Chromaticity Bins
Cool
White
6200 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S
6000 K 53 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S
6200 K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D
6500 K E1 1A, 1B, 1C, 1D
5700 K E2 2A, 2B, 2C, 2D
Neutral
White
5000 K E3 3A, 3B, 3C, 3D
4750 K F4 3C, 3D, 4A, 4B
4500 K E4 4A, 4B, 4C, 4D
4250 K F5 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4
4000 K E5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4
4000 K Z5 5A3, 5B4, 5C1, 5D2
3750 K F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4
Warm
White
3500 K E6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4
3500 K Z6 6A3, 6B4, 6C1, 6D2
3250 K F7 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4
3000 K E7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4
3000 K Z7 7A3, 7B4, 7C1, 7D2
2850 K F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4
2700 K E8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4
2700 K Z8 8A3, 8B4, 8C1, 8D2
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
27
XLamp® Xp-L LED
BIN AND ORDER CODE FORMATS
XP-L bin codes and order codes are congured in the following manner:
Order Code Bin Code
SSSCCC-BD-HHHH-HHHNFFNNN
Series
XPL = XP-L
Class
0 = High density
H = High intensity
CRI specification
0 = Cool White
B = 70 CRI minimum
L = Standard CRI
H = 80 CRI minimum
P = 85 CRI minimum
U = 90 CRI minimum
Chromaticity group
Luminous flux group
Internal code
Color
AWT = White
Series
XPL = XP-L
Class
0 = High density
H = High intensity
Luminous flux group
CRI specification
0 = Cool White
B = 70 CRI minimum
L = Standard CRI
H = 80 CRI minimum
P = 85 CRI minimum
U = 90 CRI minimum
Internal code
Chromaticity
group
Color
AWT = White
SSSCCC-B-WWW-FFF-GN-AAAA
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
28
XLamp® Xp-L LED
REFLOW SOLDERING CHARACTERISTICS
In testing, Cree has found XLamp XP-L LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general
guideline, Cree recommends that users follow the recommended soldering prole provided by the manufacturer of the solder paste used,
and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.
Note that this general guideline may not apply to all PCB designs and congurations of reow soldering equipment.
Profile Feature Lead-Free Solder
Average Ramp-Up Rate (Tsmax to Tp) 1.2°C/second
Preheat: Temperature Min (Tsmin) 120 °C
Preheat: Temperature Max (Tsmax)170 °C
Preheat: Time (tsmin to tsmax) 65-150 seconds
Time Maintained Above: Temperature (TL)217 °C
Time Maintained Above: Time (tL) 45-90 seconds
Peak/Classication Temperature (Tp) 235 - 245 °C
Time Within 5°C of Actual Peak Temperature (tp) 20-40 seconds
Ramp-Down Rate 1 - 6 °C/second
Time 25°C to Peak Temperature 4 minutes max.
Note: All temperatures refer to the topside of the package, measured on the package body surface.
IPC/JEDEC J-STD-020C
TP
TL
Temperature
Time
t 25˚C to Peak
Preheat
ts
tS
tP
25
Ramp-down
Ramp-up
Critical Zone
TL to TP
Tsmax
Tsmin
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
29
XLamp® Xp-L LED
NOTES
Measurements
The luminous ux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Cree’s control and are not intended or provided as operational specications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specications.
Please read the LED Reliability Overview for details of the qualication process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Cree’s pre-release qualication testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specic LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XP-L LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited oor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs
in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Ecology section of the Cree website.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative
to insure you get the most up-to-date REACh Declaration. REACh banned substance information (REACh Article 67) is also available upon
request.
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
30
XLamp® Xp-L LED
UL® Recognized Component
This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has been investigated as a re and electrical enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
NOTES - CONTINUED
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
31
XLamp® Xp-L LED
MECHANICAL DIMENSIONS
All measurements are ±.13mm unless otherwise indicated.
XP-L High Density
XPLAWT-00-xxxx-xxxxxxxxx
High Density
Alternate bottom views of the XP-L High Density LED are shown in the diagrams below.
Top View Side View Bottom View
Bottom View
Bottom View
Bottom View
Anode
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
32
XLamp® Xp-L LED
MECHANICAL DIMENSIONS - CONTINUED
XP-L High Intensity
XPLAWT-H0-xxxx-xxxxxxxxx
High Intensity
XP-L High Density & High Intensity
Notes:
• Cree recommends using thermal pad kickouts to maximize component thermal performance.
• Cree recommends using white solder mask material to minimize system optical loss.
* This stencil has been tested and optimized for the avoidance of voiding when using ALPHA® LUMET® P30 Maxrel solder paste. For
other solder pastes, a “window pane” design for the thermal pad stencil may result in a lower voiding percentage. Contact your local
Cree Field Applications Engineer for consultation regarding your specic application.
Top View
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
3.30
.50
1.0
3.45
3.45
3.30
2.30
1.30
.50
3.30
.50
2.30
1.01
.75
.25
.64
3.30
3.30
1.30
.50
.50
3.30
1/122.000
E
2610-00056
OUTLINE DRAWING XPL
3/13/15D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
OPTICAL
REFERENCE
OPTICAL
REFERENCE
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
3.30
.50
1.0
3.45
3.45
3.30
2.30
1.30
.50
3.30
.50
2.30
1.01
.75
.25
.64
3.30
3.30
1.30
.50
.50
3.30
1/122.000
E
2610-00056
OUTLINE DRAWING XPL
3/13/15D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
OPTICAL
REFERENCE
OPTICAL
REFERENCE
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
3.30
.50
1.0
3.45
3.45
3.30
2.30
1.30
.50
3.30
.50
2.30
1.01
.75
.25
.64
3.30
3.30
1.30
.50
.50
3.30
1/122.000
E
2610-00056
OUTLINE DRAWING XPL
3/13/15D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
OPTICAL
REFERENCE
OPTICAL
REFERENCE
Side View Bottom View
Anode
Recommended Solder Pad
Recommended Copper Layout
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
33
XLamp® Xp-L LED
TAPE AND REEL
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
Except as noted, all dimensions in mm [inches]
XP-L High Density
XPLAWT-00-xxxx-xxxxxxxxx
High Density
Anode Side
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
3456
6 5 4 3 2 1
A
B
C
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6 1/11.000
A
2402-00040
Carrier Tape, XPL
5/16/14 D. CRONIN
.30 [.012]
T
Ao
3.60 [.142]
3.00 [.118]
Ko
3.0 °
3.0 °
3.60 [.142]
Bo
10.25
[.404]
E2
P2
2.00 [.079]
Po
4.00 [.157]
Ø1.50
+.10
-.00
Ø1.50
[.059]
D1
MIN
12.00 [.472]
NOMINAL
12.30 [.484]
MAX
W
1.75 [.069]
E1
5.50 [.217]F
8.00 [.315]
P
POCKET SIZE
Ao - 3.60 mm [.142"]
Bo - 3.60 mm [.142"]
Ko - 3.00 mm [.118"]
CATHODE SIDE
ANODE SIDE
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
3456
6 5 4 3 2 1
A
B
C
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6 1/11.000
A
2402-00040
Carrier Tape, XPL
5/16/14 D. CRONIN
.30 [.012]
T
Ao
3.60 [.142]
3.00 [.118]
Ko
3.0 °
3.0 °
3.60 [.142]
Bo
10.25
[.404]
E2
P2
2.00 [.079]
Po
4.00 [.157]
Ø1.50
+.10
-.00
Ø1.50
[.059]
D1
MIN
12.00 [.472]
NOMINAL
12.30 [.484]
MAX
W
1.75 [.069]
E1
5.50 [.217]F
8.00 [.315]
P
POCKET SIZE
Ao - 3.60 mm [.142"]
Bo - 3.60 mm [.142"]
Ko - 3.00 mm [.118"]
CATHODE SIDE
ANODE SIDE
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
3456
6 5 4 3 2 1
A
B
C
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6 1/11.000
A
2402-00040
Carrier Tape, XPL
5/16/14 D. CRONIN
.30 [.012]
T
Ao
3.60 [.142]
3.00 [.118]
Ko
3.0 °
3.0 °
3.60 [.142]
Bo
10.25
[.404]
E2
P2
2.00 [.079]
Po
4.00 [.157]
Ø1.50
+.10
-.00
Ø1.50
[.059]
D1
MIN
12.00 [.472]
NOMINAL
12.30 [.484]
MAX
W
1.75 [.069]
E1
5.50 [.217]F
8.00 [.315]
P
POCKET SIZE
Ao - 3.60 mm [.142"]
Bo - 3.60 mm [.142"]
Ko - 3.00 mm [.118"]
CATHODE SIDE
ANODE SIDE
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
3456
6 5 4 3 2 1
A
B
C
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6 1/11.000
A
2402-00040
Carrier Tape, XPL
5/16/14 D. CRONIN
.30 [.012]
T
Ao
3.60 [.142]
3.00 [.118]
Ko
3.0 °
3.0 °
3.60 [.142]
Bo
10.25
[.404]
E2
P2
2.00 [.079]
Po
4.00 [.157]
Ø1.50
+.10
-.00
Ø1.50
[.059]
D1
MIN
12.00 [.472]
NOMINAL
12.30 [.484]
MAX
W
1.75 [.069]
E1
5.50 [.217]F
8.00 [.315]
P
POCKET SIZE
Ao - 3.60 mm [.142"]
Bo - 3.60 mm [.142"]
Ko - 3.00 mm [.118"]
CATHODE SIDE
ANODE SIDE
Loaded Pockets
(500 Lamps)
Leader
400 mm (min.) of
empty pockets with
at least 100 mm
sealed by tape
(50 empty pockets min.)
Trailer
160 mm (min.) of
empty pockets
sealed with tape
(20 pockets min.)
START
END
User Feed Direction
Loaded Pockets
(1,000 Lamps)
Leader
400mm (min) of
empty pockets with
at least 100mm
sealed by tape
(50 empty pockets min.)
Trailer
160mm (min) of
empty pockets
sealed with tape
(20 pockets min.)
START
END
Cathode Side
Anode Side
(denoted by + and circle)
160.0
A
A
B
2.5
±.1
SECTION A-A
SCALE 2 : 1
1.5
±.1
8.0
±.1
4.0
±.1
1.75
±.10
12.0 .0
+
.3
DETAIL B
SCALE 2 : 1
13
mm
7"
Cover Tape
Pocket Tape
User Feed Direction
User Feed Direction
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
34
XLamp® Xp-L LED
TAPE AND REEL - CONTINUED
XP-L High Intensity
XPLAWT-H0-xxxx-xxxxxxxxx
High Intensity
.30 [.012]
T
Ao
3.70 [.146]
1.20 [.047]
Ko
3.0°
3.0°
3.70 [.146]
Bo
10.25
[.404]
E2
P2
2.00 [.079]
Po
4.00 [.157]
Ø 1.50 +.10 +.0039 -.00[.0591-.0000]Do
Ø 1.50
[.059]
D1
MIN
12.00 [.472]
NOMINAL
12.30 [.484]
MAX
W
1.75 [.069]
E1
5.50 [.217]F
8.00 [.315]
P
POCKET SIZE
Ao - 3.70 mm [.146"]
Bo - 3.70 mm [.146"]
Ko - 1.20 mm [.047"]
ANODE SIDE
CATHODE SIDE
.30 [.012]
T
Ao
3.70 [.146]
1.20 [.047]
Ko
3.0°
3.0°
3.70 [.146]
Bo
10.25
[.404]
E2
P2
2.00 [.079]
Po
4.00 [.157]
Ø 1.50 +.10 +.0039 -.00[.0591-.0000]Do
Ø 1.50
[.059]
D1
MIN
12.00 [.472]
NOMINAL
12.30 [.484]
MAX
W
1.75 [.069]
E1
5.50 [.217]F
8.00 [.315]
P
POCKET SIZE
Ao - 3.70 mm [.146"]
Bo - 3.70 mm [.146"]
Ko - 1.20 mm [.047"]
ANODE SIDE
CATHODE SIDE
.30 [.012]
T
Ao
3.70 [.146]
1.20 [.047]
Ko
3.0°
3.0°
3.70 [.146]
Bo
10.25
[.404]
E2
P2
2.00 [.079]
Po
4.00 [.157]
Ø 1.50 +.10 +.0039 -.00[.0591-.0000]Do
Ø 1.50
[.059]
D1
MIN
12.00 [.472]
NOMINAL
12.30 [.484]
MAX
W
1.75 [.069]
E1
5.50 [.217]F
8.00 [.315]
P
POCKET SIZE
Ao - 3.70 mm [.146"]
Bo - 3.70 mm [.146"]
Ko - 1.20 mm [.047"]
ANODE SIDE
CATHODE SIDE
.30 [.012]
T
Ao
3.70 [.146]
1.20 [.047]
Ko
3.0°
3.0°
3.70 [.146]
Bo
10.25
[.404]
E2
P2
2.00 [.079]
Po
4.00 [.157]
Ø 1.50 +.10 +.0039 -.00[.0591-.0000]Do
Ø 1.50
[.059]
D1
MIN
12.00 [.472]
NOMINAL
12.30 [.484]
MAX
W
1.75 [.069]
E1
5.50 [.217]F
8.00 [.315]
P
POCKET SIZE
Ao - 3.70 mm [.146"]
Bo - 3.70 mm [.146"]
Ko - 1.20 mm [.047"]
ANODE SIDE
CATHODE SIDE
Anode Side
Loaded Pockets
(1,000 Lamps)
Leader
400mm (min) of
empty pockets with
at least 100mm
sealed by tape
(50 empty pockets min.)
Trailer
160mm (min) of
empty pockets
sealed with tape
(20 pockets min.)
START
END
Cathode Side
Anode Side
(denoted by + and circle)
160.0
A
A
B
2.5
±.1
SECTION A-A
SCALE 2 : 1
1.5
±.1
8.0
±.1
4.0
±.1
1.75
±.10
12.0 .0
+
.3
DETAIL B
SCALE 2 : 1
13
mm
7"
Cover Tape
Pocket Tape
User Feed Direction
User Feed Direction
Copyright © 2014-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and SC5 Technology® are registered trademarks
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
35
XLamp® Xp-L LED
PACKAGING
Patent Label
(on bottom of box)
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Unpackaged Reel
Packaged Reel
Boxed Reel
CREE Bin Code
& Barcode Label
Vacuum-Sealed
Moisture Barrier Bag
Label with Customer
P/N, Qty, Lot #, PO #
Label with Cree Bin
Code, Qty, Lot #
Label with Cree Bin
Code, Qty, Lot #
Vacuum-Sealed
Moisture Barrier Bag
Patent Label
Label with Customer Order
Code, Qty, Reel ID, PO #
