FEATURES BENEFITS
HOW TO ORDER
L
ONGFELLOW
II M
ETRIC
S
ERIES
LINEAR
POSITION
TRANSDUCER
• Vibration damped element • No wiper bounce in high vibration Environments
• Spring-loaded ball joint assembly • Operation under high side loads
• Extruded wiper carrier guides • Smooth operation under large misalignment
• Precious metal wipers • Insures high performance, low noise, no oxidation
• MystR® plastic elements • Tested up to one billion operations
• High DC level output • Works with simple controllers
• High performance bearings • Long life under side load conditions
• Absolute continuous measurement • Accurate position at power-up
• Shaft seals • Protect internal components from environments
• LF2W • NEMA 4 and water resistant
APPLICATIONS
•
INJECTION
MOLDING
MACHINES
•
PRINTING
PRESSES
•
MEAT PACKING
EQUIPMENT
•
DRILL
PRESSES
•
WOODWORKING
MACHINES
•
CRANES
•
FRONT-END
LOADERS
•
SCALES
•
SEMI CONDUCTOR
PROCESSING
•
WATER RESISTANT
LONGFELLOW® II METRIC SERIES • LINEAR POSITION TRANSDUCER
The new Longfellow II Metric Series has a rugged long-life design
featuring greater resistance to vibration and a smooth high quality
signal. It has a solid stainless steel shaft, longer front-end bearings, a
vibration-free damped element, a spring-loaded ball joint and a high
precision precious metal wiper. Carrier guides extruded the full length
of the housing insure smooth operation even under severe side load
conditions.
The Longfellow II Metric is a direct drop-in replacement for existing
Waters, Data Instruments, Novotechnik, Gefran or Sfernice units. The
newly designed internal components provide improvements which
were developed after worldwide testing and field experience.
Intrinsically Safe for Class I, II, and III Division 1,
Groups A, B, C, D, E, F and G for Hazardous
(indoor/outdoor) NEMA 4 locations.
V max = 30 V, I max = 100 mA,
Ci = 0, uF, Li, = 0 mH.
LF2S 0152 M 5K B 6 G
Electrical
Travel
Unit of
Measure
Termination
Shaft
Linearity
Total
Resistance
(Ohms)
Note: Not all combinations are available. Minimum quantity orders apply. Contact the factory for more details.
Model
M = Millimeters
8 = M6 x 1 Thread
A = Binder
G = Hirshmann
B = 0.1%
5K = 5000 Ohms
LF2S = Standard
LF2W = Water Resistant
0152 =152 0229 =229
0305 =305 0355 =355
0457 =457 0610 =610
0762 =762 0914 =914
1219 =1219
M6X1
'X'
47.8
'Y'
34.5
19.00
±0.25
11.11mm
ACROSS
FLATS
1
2
3
31.8
0.62
3.18
31.8
0.62
50.8
25.4
50.8
MOUNTING FEET (2)
3.962 x 7.925 (SLOT)
12.7
6.4
4.1
42.7
21.3
1
2
3
SCHEMATIC
SHAFT EXTENDED
(CONNECTOR END)
www.honeywell.com/sensing/products/di
L
ONGFELLOW
®
II M
ETRIC
S
ERIES
•
LINEAR
POSITION
TRANSDUCER
TECHNICAL SPECIFICATIONS
Sensing and Control
Honeywell
100 Discov ery Way
Acton, MA 01720 USA
T el: (877) 384-1300; Fax: (978) 263-0630
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local
sales office for warranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell
will repair or replace without charge those items it finds defective. The foregoing is Buyer’s sole remedy and is in lieu of all other
warranties, expressed or implied, including those of merchantability and fitness for a particular purpose.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer
to determine the suitability of the product in the application.
Item # 1126000 M.G. 02/02 Rev. B
DIMENSIONS
xx.x = mm
MECHANICAL
Total Mechanical Travel 152 to 1219 mm
Starting Forces* 0.45 kg
Total Weight 0.36 to 2 kg
Vibration** 20 g rms/0.75 mm 5-2 Hz
Shock 50 g, 11 ms half sine
Backlash 0.025 mm
Life One Billion Dither Operations
ELECTRICAL
Theoretical 150 to 1200 mm
Electrical Travel
Independent 0.1% over
Linearity Theoretical Electrical Travel
Total Resistance 5000 Ohms
Resistance Tolerance 20%
Operating -65° to 105° C
Temperature -85° to 221° F
Resolution Infinite
Insulation Resistance 1000 M Ohms @ 500 Vdc
Dielectric Strength 1000 V rms
Recommended Wiper Current <1 µA
Electrical DIN 43650 Connector
Connection or Equivalent
Maximum Applied Voltage 30 Vdc
* Starting force for LFIIW 2.27 kg MAX
Water resistant LFIIW Models are rated to NEMA 4
** For vibration levels up to 50 g rms and higher additional housing clamps are required
Caution: Do not test on an Ohm Meter on the Rx 1 scale or other current devices.
Caution: Excessive Wiper Current can cause Output errors or damage.
Caution: Zero shaft side load is recommended to achieve maximum life.
Notes:
1. Total Mechanical Travel
equals Electrical Travel plus
2 mm minimum
2. ‘X’ equals Electrical Travel
plus 91 mm
3. ‘Y’ equals Electrical Travel
minus 25 mm
(EXCEPT for LF II 229:
‘Y’ equals Electrical Travel
minus 29 mm)
SPECIALS AND ACCESSORIES
• Other Electrical Travels
• Other Resistance Values
• Rod-end Bearings
• Ball Joint Assembly
• Dual Element
• Optional Linearity Values
