Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Long Life RLL 116 FEATURES * Polarized aluminium electrolytic capacitors, non-solid handbook, 4 columns * Radial leads, cylindrical aluminium case, all-insulated (light blue) * Natural pitch 2.5 mm and 5 mm * Charge and discharge proof * Miniaturized, high CV-product per unit volume MAM074 * Long useful life: 2000 hours at 105 C, high reliability. Fig.1 Component outlines. APPLICATIONS * Automotive, telecommunication, industrial and EDP handbook, halfpage RML 048 * Stand-by applications in audio and video equipment higher CV-values * Coupling, decoupling, timing; smoothing, filtering and buffering in DC-DC converters RSP 036 85 oC RLL 116 105 oC MGC673 * Portable and mobile equipment (small size, low mass). QUICK REFERENCE DATA DESCRIPTION VALUE Case sizes (Dnom x Lnom) 5 x 11 and 8.2 x 11 mm 0.47 to 470 F Rated capacitance range, CR 20% Tolerance on CR Rated voltage range, UR 6.3 to 100 V -55 to +105 C Category temperature range Endurance test at 105 C 1500 hours Endurance test at 85 C 5000 hours Useful life at 105 C 2000 hours Useful life at 40 C, 1.3 x IR applied 200000 hours Shelf life at 0 V, 105 C 1500 hours Based on sectional specification IEC 384-4/CECC 30300 Climatic category IEC 68 (DIN 40040) 1996 Nov 05 55/105/56 (FMF) 1 Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Long Life RLL 116 Selection chart for CR, UR, and relevant nominal case sizes (D x L in mm) Preferred types in bold. UR (V) CR (F) 6.3 10 16 25 35 40 0.47 - - - - - - 1.0 - - - - - 1.5 - - - - 2.2 - - - - 3.3 - - - 4.7 - - 6.8 - - 63 100 5 x 11 - - - 5 x 11 - - - - 5 x 11 - - - - 5 x 11 - 8.2 x 11 - - - 5 x 11 - - - - - - 5 x 11 - 8.2 x 11 - - - - - 5 x 11 - - - - - - - 5 x 11 8.2 x 11 8.2 x 11 - - - - - - 8.2 x 11 - - - - - - - - 5 x 11 - - - - - - - - 5 x 11 8.2 x 11 - - - - - - - 8.2 x 11 - - 33 - - - - 5 x 11 5 x 11 8.2 x 11 - - 47 - - - 5 x 11 - - 8.2 x 11 - - 68 - - 5 x 11 - - - 8.2 x 11 - - 10 15 22 50 100 - 5 x 11 - - 8.2 x 11 8.2 x 11 - - - 150 5 x 11 - - 8.2 x 11 - - - - - 220 - - 8.2 x 11 - - - - - - - 8.2 x 11 - - - - - - - 8.2 x 11 - - - - - - - - 330 470(1) Note 1. For higher CV-values see "data sheet RML 048". 1996 Nov 05 2 Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Long Life RLL 116 MECHANICAL DATA, AVAILABLE FORMS AND PACKAGING QUANTITIES handbook, 2 columns O D handbook, 2 columns L OD L 1 4 0 15 min F Od MGB133 - 1 Od F 5 min MBC317 Dimensions in mm. For dimensions see Table 1. Dimensions in mm. For dimensions see Table 1. Fig.2 Form CA: Long leads. Table 1 Fig.3 Form CB: Cut leads. Physical dimensions, mass and packaging quantities; see Figs 2 and 3 NOMINAL CASE SIZE D x L (mm) PACKAGING QUANTITIES CASE CODE d (mm) Dmax (mm) Lmax (mm) F (mm) MASS (g) 5 x 11 11 0.5 5.5 12 2.5 0.5 0.4 1000 1000 2000 8.2 x 11 13 0.6 8.7 12 5 0.5 1.1 1000 500 1000 1996 Nov 05 3 FORM CA, CB FORM TR+,TN+ FORM TFA, TNA Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Long Life RLL 116 Taped products handbook, 2 columns andbook, 4 columns MRA448 Form TNA. Pitch F = 2.5 mm. Case D x L = 5 x 11 mm only. Tape dimensions are specified in this handbook, Section "Packaging". Form TFA. Pitch F = 5 mm. Case D x L = 5 x 11 and 8.2 x 11 mm. Tape dimensions are specified in this handbook, Section "Packaging". Fig.4 Taped in box (ammopack). Fig.5 Taped in box (ammopack). MARKING The capacitors are marked (where possible) with the following information: * Rated capacitance (in F) * Tolerance on rated capacitance, code letter in accordance with "IEC 62" * Rated voltage (in V) * Group number (116) * Name of manufacturer (PH) * Date code in accordance with "IEC 62" * Code indicating factory of origin * Minus-sign on top to identify the negative terminal. 1996 Nov 05 MRA449 4 Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Long Life RLL 116 ELECTRICAL DATA Unless otherwise specified, all electrical values in Tables 2 and 4 apply at Tamb = 20 C, P = 86 to 106 kPa, RH = 45 to 75%. SYMBOL DESCRIPTION CR rated capacitance at 100 Hz, tolerance 20% IR rated RMS ripple current at 100 kHz, 105 C IL1 max. leakage current after 1 minute at UR IL5 max. leakage current after 5 minutes at UR Tan max. dissipation factor at 100 Hz ESR equivalent series resistance at 100 Hz (calculated from tan max and CR) Z10 max. impedance at 10 kHz and 20 or -40 C Z100 max. impedance at 100 kHz and 20 C Table 2 Electrical data; preferred types in bold NOMINAL IR CASE SIZE CASE 100 kHz D x L CODE 105 C (mm) (mA) UR (V) CR 100 Hz (F) 6.3 150 5 x 11 11 130 470 8.2 x 11 13 300 10 16 25 35 40 IL1 1 min (A) 8.7 21 Z10 10 kHz 20 C () Z100 100 kHz 20 C () Z10 10 kHz -40 C () IL5 5 min (A) Tan 100 Hz ESR 100 Hz () 3.9 0.25 2.7 2 1.3 32 6 0.25 0.8 0.64 0.45 10 32 100 5 x 11 11 130 9 330 8.2 x 11 13 280 23 68 5 x 11 11 130 220 8.2 x 11 13 280 24 6.5 0.16 1.2 0.73 0.5 47 5 x 11 11 120 10 4.2 0.14 4.7 2.6 1.6 32 150 8.2 x 11 13 260 26 6.8 0.14 1.5 0.8 0.5 10 9.5 4 0.2 3.2 2 1.4 6.3 0.2 1.0 0.61 0.45 4.1 0.16 3.7 2.4 1.5 9.7 29 9.1 33 5 x 11 11 110 4.2 0.12 5.8 2.7 1.7 33 100 8.2 x 11 13 240 24 6.5 0.12 1.9 0.9 0.55 11 33 5 x 11 11 110 10.9 4.3 0.12 5.8 2.7 1.7 33 100 8.2 x 11 13 240 27 7 0.12 1.9 0.9 0.55 11 1996 Nov 05 9.9 5 Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Long Life RLL 116 ORDERING INFORMATION Ordering example Electrolytic capacitor RLL 116 220 F/16 V; 20% Nominal case size: 8.2 x 11 mm; Form TFA Catalogue number: 2222 116 35221. Table 3 Ordering information; preferred types in bold CATALOGUE NUMBER 2222 ... ..... UR (V) 6.3 10 16 25 35 40 CR 100 Hz (F) BULK PACKAGING CASE CODE TAPED AMMOPACK LONG LEADS FORM CA F (mm) CUT LEADS FORM CB F (mm) FORM TFA F (mm) FORM TNA F (mm) 150 11 116 53151 2.5 - - 116 33151 5.0 116 73151 2.5 470 13 116 53471 5.0 116 63471 5.0 116 33471 5.0 - - 100 11 116 54101 2.5 - - 116 34101 5.0 116 74101 2.5 330 13 116 54331 5.0 116 64331 5.0 116 34331 5.0 - - 68 11 116 55689 2.5 - - 116 35689 5.0 116 75689 2.5 220 13 116 55221 5.0 116 65221 5.0 116 35221 5.0 - - 47 11 116 56479 2.5 - - 116 36479 5.0 116 76479 2.5 150 13 116 56151 5.0 116 66151 5.0 116 36151 5.0 - - 33 11 116 50339 2.5 - - 116 30339 5.0 116 70339 2.5 100 13 116 50101 5.0 116 60101 5.0 116 30101 5.0 - - 33 11 116 57339 2.5 - - 116 37339 5.0 116 77339 2.5 100 13 116 57101 5.0 116 67101 5.0 116 37101 5.0 - - 1996 Nov 05 6 Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Long Life RLL 116 ELECTRICAL DATA (continued) Table 4 UR (V) Electrical data continued; preferred types in bold CR 100 Hz (F) 50 63 NOMINAL IR CASE SIZE CASE 100 kHz D x L CODE 105 C (mm) (mA) IL1 1 min (A) IL5 5 min (A) Tan 100 Hz ESR 100 Hz () Z10 10 kHz 20 C () Z100 100 kHz 20 C () Z10 10 kHz -40 C () 0.47 5 x 11 11 30 3.1 3 0.09 300 150 10 1900 1.0 5 x 11 11 40 3.3 3.1 0.09 140 70 6 900 1.5 5 x 11 11 50 3.5 3.1 0.09 95 47 4 600 2.2 5 x 11 11 60 3.7 3.1 0.09 65 32 3.5 410 3.3 5 x 11 11 65 4 3.2 0.09 43 21 3.1 270 4.7 5 x 11 11 70 4.4 3.2 0.09 30 15 2.8 190 6.8 5 x 11 11 75 5 3.3 0.09 21 10 2.5 130 10 5 x 11 11 80 6 3.5 0.09 14 7 2.2 90 10 8.2 x 11 13 160 6 3.5 0.05 8.0 3.6 1.0 40 15 5 x 11 11 90 7.5 3.8 0.09 9.5 4.7 2.0 60 22 5 x 11 11 110 9.6 4.1 0.09 6.5 3.2 1.9 41 22 8.2 x 11 13 190 9.6 4.1 0.06 4.4 2.2 0.9 29 33 8.2 x 11 13 190 13 4.7 0.09 4.3 2.1 0.77 27 47 8.2 x 11 13 210 17 5.4 0.09 3.0 1.5 0.65 19 68 8.2 x 11 13 240 23 6.4 0.09 2.1 1.0 0.55 13 10 8.2 x 11 13 160 7 3.6 0.06 9.5 3.5 1.3 45 22 8.2 x 11 13 190 11 4.4 0.06 4.4 1.8 0.9 23 8.2 x 11 13 60 4.3 3.2 0.06 43 18 4 190 5.8 3.5 0.07 24 12 3.5 170 9 4 0.08 13 100 2.2 4.7 10 8.2 x 11 13 75 8.2 x 11 13 100 4.5 3 Additional electrical data PARAMETER CONDITIONS VALUE Voltage Surge voltage for short periods Us 1.3 UR Reverse voltage Urev 1 V Current Leakage current after 1 minute at UR IL1 0.006CR x UR + 3 A after 5 minutes at UR IL5 0.001CR x UR + 3 A case D x L = 5 x 11 mm typ. 13 nH case D x L = 8.2 x 11 mm typ. 16 nH Inductance Equivalent series inductance (ESL) 1996 Nov 05 7 70 Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Long Life RLL 116 ORDERING INFORMATION (continued) Table 5 Ordering information continued; preferred types in bold CATALOGUE NUMBER 2222 ... ..... UR (V) 50 CR CASE 100 Hz CODE (F) 100 TAPED AMMOPACK LONG LEADS CUT LEADS FORM CA F (mm) FORM CB F (mm) FORM TFA F (mm) FORM TNA F (mm) 0.47 11 116 51477 2.5 - 5.0 116 31477 5.0 116 71477 2.5 1.0 11 116 51108 2.5 - 5.0 116 31108 5.0 116 71108 2.5 1.5 11 116 51158 2.5 - 5.0 116 31158 5.0 116 71158 2.5 2.2 11 116 51228 2.5 - 5.0 116 31228 5.0 116 71228 2.5 3.3 11 116 51338 2.5 - 5.0 116 31338 5.0 116 71338 2.5 4.7 11 116 51478 2.5 - 5.0 116 31478 5.0 116 71478 2.5 11 116 51688 2.5 - 5.0 116 31688 5.0 116 71688 2.5 10 11 116 51109 2.5 - 5.0 116 31109 5.0 116 71109 2.5 10 13 116 90084 5.0 116 90085 5.0 116 90036 5.0 - - 6.8 63 BULK PACKAGING 15 11 116 51159 2.5 - 5.0 116 31159 5.0 116 71159 2.5 22 11 116 51229 2.5 - 5.0 116 31229 5.0 116 71229 2.5 22 13 116 90025 5.0 116 90086 5.0 116 90039 5.0 - - 33 13 116 51339 5.0 116 61339 5.0 116 31339 5.0 - - 47 13 116 51479 5.0 116 61479 5.0 116 31479 5.0 - - 68 13 116 51689 5.0 116 61689 5.0 116 31689 5.0 - - 10 13 116 58109 5.0 116 68109 5.0 116 38109 5.0 - - 22 13 116 58229 5.0 116 68229 5.0 116 38229 5.0 - - 2.2 13 116 59228 5.0 116 69228 5.0 116 39228 5.0 - - 4.7 13 116 59478 5.0 116 69478 5.0 116 39478 5.0 - - 13 116 59109 5.0 116 69109 5.0 116 39109 5.0 - - 10 1996 Nov 05 8 Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Long Life RLL 116 ELECTRICAL DATA (continued) Capacitance (C) MGB144 handbook, 4 columns 2 3 1 1.1 4 C C0 1.0 0.9 4 0.8 3 2 0.7 Curve 1: 6.3 V. Curve 2: 10 V; 16 V. Curve 3: 35 V; 40 V; 63 V; 100 V. Curve 4: 50 V. C0 = capacitance at 20 C, 100 Hz. 0.6 1 60 20 40 0 20 40 60 100 80 T amb ( oC) 120 Fig.6 Typical multiplier of capacitance as a function of ambient temperature. MGB145 handbook, 4 columns 1.0 7 1 C C0 1 2 3 0.9 4 5 0.8 Curve 1: 50 V (2.2 F). Curve 2: 50 V (>2.2 F). Curve 3: 50 V (15 F). Curve 4: 35 V; 40 V; 63 V; 100 V. 6 0.7 7 Curve 5: 25 V. Curve 6: 16 V. Curve 7: 6.3 V; 10 V. C0 = capacitance at 20 C, 100 Hz. 10 10 2 10 3 10 4 Fig.7 Typical multiplier of capacitance as a function of frequency. 1996 Nov 05 9 f (Hz) 10 5 Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Long Life RLL 116 Equivalent series resistance (ESR) MGB146 10 2 handbook, 4 columns 2 ESR ESR 0 1 10 1 1 2 10 Curve 1: 50 V (10 F). Curve 2: 6.3 V; 63 V; 100 V. ESR0 = typical at 20 C, 100 Hz. 1 50 0 50 T amb ( oC) 100 Fig.8 Typical multiplier of ESR as a function of ambient temperature. MGB126 2.0 handbook, 4 columns ESR ESR 0 1.6 2 1 1.2 0.8 1 0.4 2 Curve 1: 6.3 V. Curve 2: 50 V (10 F); 63 V; 100 V. ESR0 = typical at 20 C, 100 Hz. 0 10 10 2 10 3 10 4 Fig.9 Typical multiplier of ESR as a function of frequency. 1996 Nov 05 10 f (Hz) 10 5 Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Long Life RLL 116 Impedance (Z) MGB166 - 1 handbook, 4 columns 10 3 Curve 1: 0.47 F. Curve 2: 1.0 F. Curve 3: 1.5 F. Curve 4: 2.2 F. Curve 5: 3.3 F. Curve 6: 4.7 F. Curve 7: 6.8 .F Curve 8: 10 F. Curve 9: 15 F. Curve 10: 22 F. Curve 11: 33 F. Curve 12: 47 F. Curve 13: 68 F. Curve 14: 100 F. Curve 15: 150 F. Case D x L = 5 x 11 mm. Tamb = 20 C. Z ( ) 10 2 10 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 10 2 10 3 10 4 10 5 f (Hz) 10 6 Fig.10 Typical impedance as a function of frequency. MBC182 10 3 handbook, 4 columns Z ( ) 10 2 5 6 7 8 9 10 11 12 13 Curve 1: 2.2 F. Curve 2: 4.7 F. Curve 3: 10 F, 100 V. Curve 4: 10 F, 50 V. Curve 5: 22 F, 50 V. Curve 6: 33 F. Curve 7: 47 F. Curve 8: 68 F. Curve 9: 100 F. Curve 10: 150 F. Curve 11: 220 F. Curve 12: 330 F. Curve 13: 470 F. Case D x L = 8.2 x 11 mm. Tamb = 20 C. 10 1 2 3 1 10 1 4 10 2 10 3 104 Fig.11 Typical impedance as a function of frequency. 1996 Nov 05 11 105 f (Hz) 10 6 Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Long Life RLL 116 RIPPLE CURRENT AND USEFUL LIFE Table 6 Multiplier of ripple current (IR/IRO) as a function of frequency; IRO = ripple current at 100 kHz FREQUENCY (Hz) IR MULTIPLIER UR = 6.3 to 10 V UR = 16 to 35 V UR = 40 to 100 V (CR 10 F) 50 0.7 0.6 0.5 100 0.77 0.71 0.63 300 0.86 0.85 0.78 1000 0.92 0.93 0.88 3000 0.96 0.96 0.94 10 to 100 k 1.0 1.0 1.0 MEA240 3.8 handbook, full pagewidth IA 3.7 IR 3.6 3.5 3.4 3.3 3.2 3.1 3.0 2.8 lifetime multiplier 2.6 0 1. 2.4 5 1. 0 2. 2.2 0 3. 0 4. 2.0 0 6. 0 8. 1.8 12 1.6 20 60 1) 0 10 0 15 0 20 1.2 1.0 0.8 0.5 0.0 30 1.4 40 50 60 IA = actual ripple current at 100 kHz. 70 80 90 100 IR = rated ripple current at 100 kHz, 105 C. (1) Useful life at 105 C and IR applied: 2000 hours. Fig.12 Multiplier of useful life as a function of ambient temperature and ripple current load. 1996 Nov 05 110 Tamb ( oC) 12 Philips Components Product specification Non-solid Al - electrolytic capacitors Radial Long Life RLL 116 SPECIFIC TESTS AND REQUIREMENTS General tests and requirements are specified in this handbook, Section "Tests and Requirements". Table 7 Test procedures and requirements TEST NAME OF TEST Endurance REFERENCE IEC 384-4/ CECC 30300 subclause 4.13 PROCEDURE (quick reference) Tamb = 105 C; UR applied; 1500 hours REQUIREMENTS UR 6.3 V; C/C: +15/-30% UR > 6.3 V; C/C: 15% tan 1.3 x spec. limit Z10 2 x spec. limit IL5 spec. limit Useful life CECC 30301 subclause 1.8.1 Tamb = 105 C; UR and IR applied; 2000 hours UR 6.3 V; C/C: +45/-50% UR > 6.3 V; C/C: 45% tan 3 x spec. limit Z10 3 x spec. limit IL5 spec. limit no short or open circuit total failure percentage: 1% Shelf life (storage at high temperature) 1996 Nov 05 IEC 384-4/ CECC 30300 subclause 4.17 C/C, tan , Z: for requirements Tamb = 105 C; no voltage applied; 1500 hours; see `Endurance test' above after test: UR to be applied for 30 minutes, IL5 2 x spec. limit 24 to 48 hours before measurement 13