769D (CECC 30202-013)
www.vishay.com Vishay
Revision: 14-Mar-12 1Document Number: 40055
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Wet Tantalum Capacitors with Epoxy End-Fill, Sintered Anode,
TANTALEX® Capacitors, CECC 30202-013 Approved
FEATURES
• Axial through-hole terminations: Standard
tin/lead (SnPb), 100 % tin (RoHS compliant)
available
• For 125 °C operation
• Very high CV per unit volume
• Long shelf life in excess of ten years
• Extremely low leakage current
• Epoxy end-filled for better shock and vibration
performance
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
*Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 125 °C
Capacitance Tolerance: ± 20 % is standard; ± 10 % and
± 5 % available as specials
Capacitance Range: 3.6 μF to 2200 μF
Life Test: Capacitors are capable of withstanding a 2000 h
life test at a temperature of + 85 °C or + 125 °C at the
applicable rated DC working voltage.
APPROVALS
• CECC 30202-013 (6 V to 125 V)
APPLICATIONS
Designed for industrial and telecommunications
applications, offers higher microfarad value per unit volume
than any other type. The epoxy resin end-fill construction
also offers improved mechanical strength, outstanding
resistance to temperature cycling, and trouble-free
application when flow-soldering capacitors to printed circuit
board.
Note
• Packaging: The use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not recommended due
to the unit weight
ORDERING INFORMATION
769D 306 X0 006 A 2 E3
MODEL CAPACITANCE CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
AT + 85 °C
CASE
CODE
STYLE NUMBER RoHS COMPLIANT
This is expressed
in picofarads.
The first two
digits are the
significant figures.
The third is the
number of zeros
to follow
X0 = ± 20 %
X9 = ± 10 %
X5 = ± 5 %
special order
This is expressed
in volts. To complete
the three-digit block,
zeros precede the
voltage rating
See
Ratings
and Case
Codes
table
0 = Bare case
2 = Outer plastic-film
insulation
E3 = Tin termination
(RoHS compliant design)
Blank = SnPb termination
(standard design)
DIMENSIONS in inches [millimeters]
CASE CODE
WITH OUTER PLASTIC-FILM INSULATION
L1
+ 031/- 0.078 [+ 0.8/- 2.0]
D
± 0.015 [± 0.4] L2Ø d + 10 %
± 0.002 [- 0.05]
A 0.535 [13.6] 0.192 [4.9] 0.984 [25] 0.023 [0.6]
B 0.724 [18.4] 0.283 [7.2] 0.984 [25] 0.023 [0.6]
C 0.846 [21.5] 0.377 [9.6] 0.984 [25] 0.023 [0.6]
D 1.129 [28.7] 0.377 [9.6] 0.984 [25] 0.023 [0.6]
+
Epoxy resin
D
L2L2
L1
Ø d
769D (CECC 30202-013)
www.vishay.com Vishay
Revision: 14-Mar-12 2Document Number: 40055
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER
MAX. DF
AT + 25 °C
(%)
MAX. IMP.
AT - 55 °C
()
MAX. DCL
(μA) AT
MAX. CAPACITANCE
CHANGE (%) AT
MAX.
RMS
RIPPLE
120 Hz
(mA)
+ 25 °C + 85 °C
+ 125 °C - 55 °C + 85 °C + 125 °C
6 VDC AT + 85 °C; 4 VDC AT + 125 °C
30 A 769D306X0006A2 8 100 1 2 - 40 + 12 + 12 70
68 A 769D686X0006A2 18 59 1 2 - 40 + 16 + 16 80
140 B 769D147X0006B2 18 40 1 3 - 40 + 16 + 16 300
220 A 769D227X0006A2 40 22 2 9 - 65 + 16 + 16 90
270 B 769D277X0006B2 70 22 1 7 - 44 + 20 + 20 270
330 C 769D337X0006C2 43 25 2 8 - 44 + 16 + 16 500
560 C 769D567X0006C2 110 20 2 13 - 64 + 20 + 20 500
820 B 769D827X0006B2 68 20 3 14 - 80 + 20 + 20 280
1200 D 769D128X0006D2 60 20 3 12 - 80 + 25 + 25 800
1500 C 769D158X0006C2 82 10 5 20 - 85 + 25 + 25 540
2200 D 769D228X0006D2 80 15 9 30 - 80 + 25 + 25 800
8 VDC AT + 85 °C; 5 VDC AT + 125 °C
25 A 769D256X0008A2 7 100 1 2 - 40 + 12 + 12 70
56 A 769D566X0008A2 15 60 1 2 - 40 + 12 + 12 80
180 A 769D187X0008A2 36 28 2 9 - 60 + 16 + 16 90
220 B 769D227X0008B2 57 30 1 7 - 44 + 20 + 20 250
430 B 769D437X0008B2 42 25 3 14 - 80 + 20 + 20 270
430 C 769D437X0008C2 84 25 2 14 - 64 + 20 + 20 500
620 B 769D627X0008B2 53 20 3 14 - 80 + 20 + 20 280
680 B 769D687X0008B2 55 20 3 14 - 80 + 20 + 20 280
850 C 769D857X0008C2 65 20 4 16 - 80 + 25 + 25 500
850 D 769D857X0008D2 50 22 4 16 - 80 + 25 + 25 850
1200 C 769D128X0008C2 82 15 5 20 - 80 + 25 + 25 520
1600 D 769D168X0008D2 68 18 7 25 - 80 + 25 + 25 800
1800 D 769D188X0008D2 70 18 8 28 - 80 + 25 + 25 800
10 VDC AT + 85 °C; 7 VDC AT + 125 °C
20 A 769D206X0010A2 5 120 1 2 - 32 + 12 + 12 70
47 A 769D476X0010A2 15 90 1 2 - 36 + 16 + 16 80
100 A 769D107X0010A2 13 60 1 4 - 36 + 16 + 16 80
120 A 769D127X0010A2 32 50 2 9 - 50 + 16 + 16 80
140 A 769D147X0010A2 32 46 2 9 - 50 + 16 + 16 90
150 A 769D157X0010A2 32 40 2 9 - 50 + 16 + 16 90
180 B 769D187X0010B2 46 40 1 7 - 36 + 16 + 16 250
250 C 769D257X0010C2 32 35 2 10 - 40 + 16 + 16 500
390 C 769D397X0010C2 75 25 2 16 - 64 + 20 + 20 500
470 B 769D477X0010B2 35 21 3 16 - 70 + 20 + 20 280
510 B 769D517X0010B2 45 21 3 16 - 70 + 20 + 20 280
560 B 769D567X0010B2 50 21 3 16 - 70 + 20 + 20 280
750 D 769D757X0010D2 44 22 4 16 - 80 + 25 + 25 850
1000 C 769D108X0010C2 67 12 5 20 - 75 + 25 + 25 540
1300 D 769D138X0010D2 63 18 7 25 - 75 + 25 + 25 800
1500 D 769D158X0010D2 66 17 8 28 - 75 + 25 + 25 800
769D (CECC 30202-013)
www.vishay.com Vishay
Revision: 14-Mar-12 3Document Number: 40055
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
15 VDC AT + 85 °C; 10 VDC AT + 125 °C
15 A 769D156X0015A2 5 145 1 2 - 24 + 12 + 12 70
33 A 769D336X0015A2 10 100 1 2 - 28 + 16 + 16 80
70 B 769D706X0015B2 11 63 1 4 - 28 + 16 + 16 250
100 A 769D107X0015A2 28 40 2 9 - 40 + 16 + 16 80
120 B 769D127X0015B2 27 50 1 7 - 28 + 20 + 20 250
170 C 769D177X0015C2 22 38 2 10 - 32 + 16 + 16 500
270 C 769D277X0015C2 50 30 2 16 - 56 + 20 + 20 500
360 B 769D367X0015B2 38 22 3 16 - 60 + 20 + 20 280
390 B 769D397X0015B2 38 21 3 16 - 60 + 20 + 20 280
540 C 769D547X0015C2 45 25 5 20 - 70 + 25 + 25 500
540 D 769D547X0015D2 15 23 3 24 - 80 + 25 + 25 850
680 C 769D687X0015C2 50 13 5 20 - 70 + 25 + 25 510
750 C 769D757X0015C2 52 13 6 24 - 70 + 25 + 25 510
820 C 769D827X0015C2 60 13 6 24 - 70 + 25 + 25 510
1100 D 769D118X0015D2 53 18 8 25 - 70 + 25 + 25 750
1200 D 769D128X0015D2 55 17 8 28 - 70 + 25 + 25 750
20 VDC AT + 85 °C; 13 VDC AT + 125 °C
82 A 769D826X0020A2 25 50 2 9 - 40 + 16 + 16 70
330 B 769D337X0020B2 30 21 3 16 - 60 + 20 + 20 280
560 C 769D567X0020C2 40 20 5 20 - 70 + 25 + 25 510
1000 D 769D108X0020D2 40 21 8 28 - 70 + 25 + 25 750
25 VDC AT + 85 °C; 15 VDC AT + 125 °C
10 A 769D106X0025A2 4 190 1 2 - 16 + 9 + 9 70
22 A 769D226X0025A2 7 140 1 2 - 20 + 12 + 12 80
50 A 769D506X0025A2 18 80 2 9 - 35 + 15 + 15 80
68 A 769D686X0025A2 22 50 2 9 - 35 + 15 + 15 80
100 B 769D107X0025B2 15 50 1 10 - 28 + 15 + 15 250
180 C 769D187X0025C2 46 32 2 18 - 48 + 15 + 15 500
270 B 769D277X0025B2 24 22 3 16 - 45 + 16 + 16 280
350 C 769D357X0025C2 27 26 7 28 - 60 + 25 + 25 500
350 D 769D357X0025D2 25 24 7 28 - 80 + 25 + 25 850
470 C 769D477X0025C2 33 18 6 24 - 60 + 25 + 25 510
510 C 769D517X0025C2 33 16 7 28 - 60 + 25 + 25 510
750 D 769D757X0025D2 36 18 8 29 - 60 + 25 + 25 750
820 D 769D827X0025D2 40 17 9 30 - 60 + 25 + 25 750
30 VDC AT + 85 °C; 20 VDC AT + 125 °C
8 A 769D805X0030A2 4 235 1 2 - 16 + 12 + 12 60
15 A 769D156X0030A2 8 175 1 2 - 20 + 12 + 12 80
40 B 769D406X0030B2 10 80 1 5 - 24 + 12 + 12 250
56 A 769D566X0030A2 20 55 2 9 - 32 + 15 + 15 70
68 B 769D686X0030B2 26 60 1 8 - 24 + 15 + 15 250
100 C 769D107X0030C2 16 45 2 12 - 28 + 12 + 12 500
150 C 769D157X0030C2 38 35 2 18 - 48 + 15 + 15 500
180 B 769D187X0030B2 21 27 3 16 - 40 + 16 + 16 280
200 B 769D207X0030B2 21 25 3 16 - 40 + 16 + 16 280
220 B 769D227X0030B2 23 25 3 16 - 40 + 16 + 16 280
300 C 769D307X0030C2 25 18 7 28 - 55 + 25 + 25 500
300 D 769D307X0030D2 27 25 4 31 - 60 + 25 + 25 820
390 C 769D397X0030C2 27 15 6 24 - 55 + 20 + 25 510
430 C 769D437X0030C2 27 15 7 28 - 55 + 25 + 25 510
620 D 769D627X0030D2 32 22 8 29 - 60 + 20 + 25 750
680 D 769D687X0030D2 36 20 7 25 - 60 + 25 + 25 750
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER
MAX. DF
AT + 25 °C
(%)
MAX. IMP.
AT - 55 °C
()
MAX. DCL
(μA) AT
MAX. CAPACITANCE
CHANGE (%) AT
MAX.
RMS
RIPPLE
120 Hz
(mA)
+ 25 °C + 85 °C
+ 125 °C - 55 °C + 85 °C + 125 °C
769D (CECC 30202-013)
www.vishay.com Vishay
Revision: 14-Mar-12 4Document Number: 40055
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
35 VDC AT + 85 °C; 23 VDC AT + 125 °C
39 A 769D396X0035A2 18 80 2 9 - 32 + 15 + 15 70
47 A 769D476X0035A2 18 60 2 9 - 32 + 15 + 15 70
150 B 769D157X0035B2 20 30 3 16 - 40 + 16 + 16 270
330 C 769D337X0035C2 26 20 6 24 - 55 + 25 + 25 500
470 D 769D477X0035D2 28 25 7 25 - 60 + 25 + 25 750
480 D 769D487X0035D2 28 25 8 29 - 60 + 25 + 25 750
560 D 769D567X0035D2 29 24 8 32 - 60 + 25 + 25 750
50 VDC AT + 85 °C; 30 VDC AT + 125 °C
5 A 769D505X0050A2 3 355 1 2 - 16 + 6 + 6 60
10 A 769D106X0050A2 5 250 1 2 - 24 + 9 + 9 80
25 A 769D256X0050A2 14 135 3 12 - 24 + 12 + 12 70
25 B 769D256X0050B2 10 90 1 5 - 20 + 12 + 12 250
33 A 769D336X0050A2 16 120 2 9 - 24 + 12 + 12 70
47 B 769D476X0050B2 18 70 1 9 - 28 + 15 + 15 250
60 C 769D606X0050C2 12 50 2 12 - 16 + 12 + 12 500
82 B 769D826X0050B2 21 45 2 16 - 32 + 15 + 15 270
120 B 769D127X0050B2 18 26 3 18 - 35 + 15 + 15 280
160 C 769D167X0050C2 30 35 12 48 - 40 + 25 + 25 500
160 D 769D167X0050D2 15 27 5 40 - 50 + 20 + 20 750
270 C 769D277X0050C2 24 16 7 28 - 40 + 25 + 25 510
360 D 769D367X0050D2 24 22 8 32 - 45 + 25 + 25 750
390 D 769D397X0050D2 25 20 8 32 - 45 + 25 + 25 750
60 VDC AT + 85 °C; 40 VDC AT + 125 °C
4 A 769D405X0060A2 3 405 1 2 - 16 + 6 + 6 50
8.2 A 769D825X0060A2 4 275 1 2 - 24 + 9 + 9 60
20 A 769D206X0060A2 7 120 1 5 - 20 + 12 + 12 70
20 B 769D206X0060B2 6 105 1 5 - 16 + 12 + 12 250
27 A 769D276X0060A2 14 90 3 12 - 20 + 12 + 12 70
39 B 769D396X0060B2 18 90 1 9 - 28 + 12 + 12 250
50 B 769D506X0060B2 9 75 2 12 - 30 + 15 + 15 250
50 C 769D506X0060C2 9 55 2 12 - 16 + 12 + 12 500
68 C 769D686X0060C2 27 50 2 16 - 32 + 12 + 12 500
100 B 769D107X0060B2 15 28 4 20 - 30 + 15 + 15 280
140 C 769D147X0060C2 18 32 7 28 - 35 + 20 + 20 500
140 D 769D147X0060D2 21 28 8 32 - 40 + 20 + 20 750
220 C 769D227X0060C2 18 17 7 28 - 35 + 20 + 20 510
300 D 769D307X0060D2 21 21 8 32 - 45 + 20 + 20 750
330 D 769D337X0060D2 23 23 9 36 - 45 + 20 + 20 750
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER
MAX. DF
AT + 25 °C
(%)
MAX. IMP.
AT - 55 °C
()
MAX. DCL
(μA) AT
MAX. CAPACITANCE
CHANGE (%) AT
MAX.
RMS
RIPPLE
120 Hz
(mA)
+ 25 °C + 85 °C
+ 125 °C - 55 °C + 85 °C + 125 °C
769D (CECC 30202-013)
www.vishay.com Vishay
Revision: 14-Mar-12 5Document Number: 40055
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
75 VDC AT + 85 °C; 50 VDC AT + 125 °C
6.8 A 769D685X0075A2 4 300 1 2 - 20 + 9 + 9 60
8.2 A 769D825X0075A2 12 200 1.5 7 - 16 + 12 + 12 60
12 A 769D126X0075A2 12 155 2 9 - 16 + 12 + 12 70
15 A 769D156X0075A2 12 130 3 12 - 16 + 12 + 12 70
15 B 769D156X0075B2 6 135 1 5 - 16 + 9 + 9 250
18 A 769D186X0075A2 12 100 3 12 - 16 + 12 + 12 70
22 A 769D226X0075A2 12 80 3 12 - 16 + 12 + 12 70
33 B 769D336X0075B2 15 90 1 10 - 24 + 15 + 15 250
40 C 769D406X0075C2 13 60 2 12 - 16 + 12 + 12 500
47 B 769D476X0075B2 20 75 3.5 20 - 25 + 15 + 15 260
56 B 769D566X0075B2 20 70 2 16 - 25 + 15 + 15 260
56 C 769D566X0075C2 22 60 2 17 - 28 + 15 + 15 500
68 B 769D686X0075B2 12 42 4 24 - 25 + 15 + 15 280
82 B 769D826X0075B2 12 30 4 24 - 25 + 15 + 15 280
100 C 769D107X0075C2 18 33 8 32 - 30 + 20 + 20 500
110 C 769D117X0075C2 18 33 8 32 - 30 + 20 + 20 500
110 D 769D117X0075D2 15 29 5 36 - 35 + 20 + 20 750
120 C 769D127X0075C2 18 28 6 26 - 30 + 20 + 20 500
150 C 769D157X0075C2 18 24 7 28 - 30 + 20 + 20 500
180 C 769D187X0075C2 18 17 8 32 - 30 + 20 + 20 510
220 D 769D227X0075D2 16 24 9 36 - 40 + 20 + 20 750
240 D 769D247X0075D2 17 24 9 36 - 40 + 20 + 20 750
270 D 769D277X0075D2 18 22 10 40 - 30 + 20 + 20 750
100 VDC AT + 85 °C; 70 VDC AT + 125 °C
4.7 A 769D475X0100A2 3 500 1 2 - 16 + 6 + 6 60
10 A 769D106X0100A2 12 200 3 12 - 16 + 12 + 12 60
11 B 769D116X0100B2 4 200 1 4 - 16 + 6 + 6 250
22 B 769D226X0100B2 10 100 1 9 - 16 + 6 + 6 250
30 C 769D306X0100C2 8 85 2 12 - 16 + 8 + 8 500
39 B 769D396X0100B2 20 80 5 24 - 25 + 15 + 15 250
43 C 769D436X0100C2 16 70 2 17 - 20 + 8 + 8 500
68 C 769D686X0100C2 18 40 10 40 - 30 + 20 + 20 500
86 D 769D866X0100D2 15 30 5 35 - 25 + 20 + 20 750
120 D 769D127X0100D2 25 36 12 48 - 40 + 20 + 20 750
125 VDC AT + 85 °C; 85 VDC AT + 125 °C
3.6 A 769D365X0125A2 4 615 1 2 - 16 + 8 + 8 50
6.8 A 769D685X0125A2 12 300 3 12 - 16 + 12 + 12 50
9 A 769D905X0125A2 12 240 4 15 - 16 + 12 + 12 50
9 B 769D905X0125B2 9 220 1 5 - 16 + 6 + 6 250
14 B 769D146X0125B2 10 160 1 7 - 16 + 7 + 7 250
25 C 769D256X0125C2 16 120 2 13 - 16 + 10 + 10 500
27 B 769D276X0125B2 20 90 5 24 - 25 + 15 + 15 250
47 C 769D476X0125C2 18 50 10 40 - 30 + 20 + 20 500
80 D 769D806X0125D2 20 34 9 50 - 20 + 20 + 20 750
82 D 769D826X0125D2 25 40 12 48 - 40 + 20 + 20 750
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER
MAX. DF
AT + 25 °C
(%)
MAX. IMP.
AT - 55 °C
()
MAX. DCL
(μA) AT
MAX. CAPACITANCE
CHANGE (%) AT
MAX.
RMS
RIPPLE
120 Hz
(mA)
+ 25 °C + 85 °C
+ 125 °C - 55 °C + 85 °C + 125 °C
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
