IMS-5SWD-65 Vishay Dale Inductors Commercial, Miniature, Molded, Shielded FEATURES * Ultra-reliable molded shielded miniature RF inductor. * Epoxy molded envelope and shielding. * Offers reliability, electrical performance and minimum coupling in high density packaging. ELECTRICAL SPECIFICATIONS DENSITY SPECIFICATIONS Inductance Range: 0.1H to 100,000H. Inductance Tolerance: 10%. Dielectric Strength: 700VRMS at sea level. Operating Temperature: - 55C to + 125C. Self-Resonant Frequency: Measured per MIL-PRF-15305 (latest revision). Q: Measured on a Q-Meter. Maximum Current: Based on temperature rise not to exceed 35C at + 90C ambient. MECHANICAL SPECIFICATIONS Terminal Strength: Meets 5 pound pull test; three 360 rotations in alternate directions when tested per MIL-PRF-15305 (latest revision). Weight: 0.75 gram maximum. Shielding: At the test frequency, two units assembled side by side exhibit less than 3% coupling. ENVIRONMENTAL SPECIFICATIONS Moisture: Per MIL-STD-202, Method 106. Vibration: High frequency, 10Hz to 2000Hz @ 20 g 10% maximum for 12 logarithmic swings each of 20 minute duration repeated for each of three mutually perpendicular planes. Shock: 100g, 6ms. DIMENSIONS in inches [millimeters] 0.157 0.010 [3.99 0.254] 1.438 0.188 [36.52 4.78] #22 0.025 0.002 [0.635 0.051] TCW 0.395 0.020 [10.03 0.508] STANDARD ELECTRICAL SPECIFICATIONS TEST FREQ. (MHz) SELF-RESONANT FREQ. MIN. (MHz) DCR MAX. (Ohms) RATED DC CURRENT (mA) 10% 50 25 250 0.025 2900 2900 10% 51 25 250 0.034 2800 2800 51 50 25 25 250 250 0.037 0.047 2750 2200 2750 10% 49 25 250 0.067 1700 2200 1700 0.27 10% 47 25 250 0.11 1500 1500 IMS-5SWD-65 0.33 10% 46 25 250 0.13 1300 1300 IMS-5SWD-65 IMS-5SWD-65 0.39 0.47 10% 44 25 250 0.18 1100 1100 0.56 10% 10% 44 43 25 25 235 210 0.25 0.33 1000 900 1000 IMS-5SWD-65 IMS-5SWD- 65 0.68 10% 42 25 190 0.45 750 900 750 IMS-5SWD-65 0.82 10% 40 25 180 0.59 600 600 IND. (H) IMS-5SWD-65 0.10 IMS-5SWD-65 IMS-5SWD-65 0.12 0.15 IMS-5SWD-65 0.18 10% 10% IMS-5SWD-65 0.22 IMS-5SWD-65 INCREMENTAL* CURRENT (mA) PHENOLIC CORE TOL. Q MIN. MODEL *Incremental Current: The DC current required to cause a 5% reduction in the nominal inductance value. Document Number 34050 Revision 19-Oct-04 For technical questions, contact Magnetics@vishay.com www.vishay.com 23 IMS-5SWD-65 Vishay Dale Inductors, Commercial, Miniature, Molded, Shielded TOL. Q MIN. TEST FREQ. (MHz) SELF-RESONANT FREQ. MIN. (MHz) DCR MAX. (Ohms) RATED DC CURRENT (mA) INCREMENTAL* CURRENT (mA) 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 47 46 45 43 45 46 44 44 44 47 50 50 49 55 25 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 2.5 140 130 115 105 100 92 85 75 70 65 55 50 46 44 0.07 0.093 0.12 0.14 0.19 0.28 0.35 0.40 0.55 0.72 1.02 1.32 1.62 2.0 1900 1600 1300 1200 1100 950 800 750 650 550 500 475 450 400 1900 1600 1300 1200 1100 950 800 750 650 550 500 475 450 400 IRON CORE 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 44 45 46 49 45 53 52 49 51 45 52 57 56 60 58 60 54 67 60 60 60 57 65 45 49 47 50 47 43 43 44 45 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 49 45 41 38 34 29 27 25 21 10.5 10 9.7 8.5 8.0 7.5 7.0 6.5 6.2 5.7 4.7 4.5 4.2 3.8 1.5 1.2 1.0 0.97 0.92 0.84 0.80 0.74 0.73 0.80 0.89 0.96 1.19 1.37 1.93 2.11 2.23 2.70 2.44 3.12 3.6 4.1 4.4 5.0 5.8 6.4 7.4 9.5 10.5 11.8 13.0 17.5 22.1 26.5 29.9 33.8 47.3 53.0 73.8 81.6 98.9 620 610 600 500 490 410 400 380 370 360 325 290 275 260 250 240 225 200 180 174 168 152 135 115 110 105 99 83 80 67 63 56 250 235 220 200 190 180 175 160 150 140 120 95 90 85 80 70 65 60 58 55 50 45 40 35 33 30 27 25 22 20 19 17 FERRITE CORE STANDARD ELECTRICAL SPECIFICATIONS IND. (H) IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 IMS-5SWD-65 MODEL *Incremental Current: The DC current required to cause a 5% reduction in the nominal inductance value. ORDERING INFORMATION MARKING -- Color coded per MIL-PRF-15305 www.vishay.com 24 IMS-5SWD-65 MODEL 0.47H INDUCTANCE VALUE For technical questions, contact Magnetics@vishay.com 10% INDUCTANCE TOLERANCE Document Number 34050 Revision 19-Oct-04 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1