D.C. geared motors Speed range : 1.7 to 344 rpm Gearboxes with torque rating of 5 Nm, solid metal gears Motors : max. usable power 1 to 3.9 W interference suppression on standard products Types Applications 82 867 0 82 867 0 12 V 24 V Nominal voltage - Pumps - Coin receptacles for toll systems - Precision mechanisms - Livestock feeding systems - Etc... Output speeds (rpm) Ratios (i) 344 258 172 103 69 34 17 8.6 1.72 12.5 50/3 25 125/3 62.5 125 250 500 2500 Part numbers 82 867 001 82 867 007 82 867 002 82 867 003 82 867 004 82 867 005 82 867 008 82 867 009 82 867 010 82 867 011 82 867 006 82 867 012 Standard gearbox shaft : see dimensions General characteristics Motor Gearbox Maximum permitted torque on gearbox for continuous rating (for 1 million revolutions) Axial load (dynamic) Radial load (dynamic) Maximum usable power Nominal usable power Gearbox case temperature rise Weight 1 82 860 0 81 037 0 82 860 0 81 037 0 N.m 5 5 daN daN W W C g 2 3 3.9 3 50 465 2 3 3.9 3 50 465 Options : for standard products non stocked Gearbox shaft O 8 mm round 79 206 478 Nominal speed and torque curves Made to order products, available on request Motors : - other supply voltages - motors with 2 ball bearings - shaft lengths at front and/or rear - connection by radial tags or leads - specific interference suppression The shaded zone represents the operating range of the geared motor. 10000 5000 The horizontal line marks the maximum torque available in continuous duty cycle for a given life. 2000 1000 For higher torque ratings, service life will be reduced. 200 100 mN.m 500 50 20 rpm 1 2 Gearbox : - fixing by M3 holes - ball bearing - special shaft - other reduction ratios Other information Basic principles : see page 1/7 Motors 82 840 0 - 82 860 0 : see page 1/9 1/26 5 10 20 50 100 200 500 82 847 0 12 V 24 V Dimensions : 82 867 0 - 82 847 0 2 across flat 1 82 847 0 2 tags NFC20-120 series 2.8 x 0.5 mm 82 840 0 81 037 0 82 840 0 81 037 0 5 5 2 3 1 0.8 50 465 2 3 1 0.8 50 465 22.5 O 32.2 max. 3 4 fixing holes O M4 x 12 Type 82 867 0 82 847 0 (shaft pushed-in ) L max. (mm) 79.8 69.8 Non stocked product : gearbox output shaft Shaft 79 206 478 1 O8 4 O 14 19,7 max. mN.m 10000 (shaft pushed-in ) 5000 2000 1000 500 200 100 50 20 rpm 1 2 5 10 20 50 100 200 500 To order, specify : Standard products 3 Part number Example : D.C. geared motor - 82 867 001 Standard products, non stocked 1 2 3 4 Type Nominal voltage Output speeds Option : D.C. geared motor 82 867 0 - 12 V - 258 rpm - output shaft 79 206 478 Example Made to order products, available on request 1/27