NOTES: REVISIONS THIRD ANGLE PROJ. 1. INITIAL TOOL SETTING RQUIREMENTS: WITH DIES FIRMLY AFFIXED IN TOOL ON THE DIE MOUNTING SURFACES, CLOSE THE TOOL FULLY (UNTIL THE RATCHET RELEASES) WITH 25-35 LBS,HAND FORCE THE DIES MUST BE 'BUTTED' (TOUCHING BOTH FRONT & REAR SURFACES). THE RATCHET ADJUSTER WHEEL SHOULD BE POSITIONED IN THE CENTER INDENT (+/- ONE INDENT POSITION) REV DESCRIPTION DATE ECO APPR A RELEASE TO MFG. 18-Dec-14 2809 CL/BCG 2. DO NOT SCALE THIS DRAWING. 3. REMOVE ALL BURRS, BREAK SHARP EDGES AND CORNERS 0.005 MAXIMUM, UNLESS OTHERWISE SPECIFIED. 4. UNLESS OTHERWISE SPECIFIED, ALL DIMENSIONS ARE AFTER PLATING. 5. PACKAGING: A. QUANTITY: B. PACKAGE MARKING: DIE SET PART NUMBER SINGLE PACK AMPHENOL RF 47-2XXXX (SEE TABLE) DATE CODE DIE SET OPENINGS IN INCHES (MM) (UNLESS OTHERWISE NOTED, ALL OPENINGS ARE HEXAGONAL) 47-20000 0.068(1.73) 0.213(5.41) 0.255(6.48) - - 47-20004 0.068(1.73) 0.128(3.25) 0.178(4.52) - - 47-20008 0.151(3.83) 0.178(4.52) 0.213(5.41) - - 47-20003 0.080(2.03) 0.100(2.54) 0.429(10.90) - - 47-20029 0.100(2.54) 0.429(10.90) 0.213(5.41) - - 47-20001 0.042(1.07) 0.068(1.73) 0.255(6.48) 0.324(8.23) - 47-20002 0.042(1.07) 0.068(1.73) 0.178(4.52) 0.213(5.40) - 47-20245 0.042(1.07) 0.068(1.73) 0.190(4.82) 0.213(5.40) - 47-20026 0.255(6.48) 0.320(8.13) 0.350(8.88) - - 47-20025 0.052(1.32) 0.068(1.73) 0.100(2.54) 0.213(5.41) 0.255(6.48) 47-20024 0.178(4.52) 0.324(8.23) 0.068(1.73) - - 47-20027 0.116(2.95) 0.429(10.90) - - - 47-20028 0.178(4.52) 0.255(6.48) 0.052(1.32) 0.068(1.73) - 47-20030 0.042(1.07) 0.068(1.73) 0.255(6.48) 0.278(7.08) - 47-20247 0.106(2.70) 0.114(2.90) 0.130(3.30) - - 47-20249 0.068(1.73) 0.100(2.54) 0.429(10.90) - - 47-20250 0.042(1.07) 0.068(1.73) 0.128(3.25) 0.178(4.52) - 47-20251 0.052(1.32) 0.263(6.68) - - - 47-20252 0.052(1.32) 0.278(7.06) - - - 47-20253 0.042 (1.07) SQ. 0.068(1.73) 0.178(4.52) 0.278(7.06) 0.255(6.48) 47-20254 0.178(4.52) 0.187(4.75) 0.042(1.07) - - - 0.324(8.23) 0.319(8.10) 0.255(6.48) 0.042(1.07) - 47-20255 0.052(1.32) 0.068(1.73) 0.255(6.48) 0.324(8.23) - 47-20256 0.429(10.90) 0.075(1.90) 0.075(1.90) - - 47-20257 0.105(2.67) 0.128(3.25) 0.151(3.84) - UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN METRIC AND TOLERANCES ARE: <0.5mm 0.5 - 6mm 6 - 30mm 30 - 120mm ANGLES # 0.05mm #0.1mm # 0.3mm #0.2mm #1 $ NOTICE - These drawings, specifications, or other data (1) are, and remain the property of Amphenol corp. (2) must be returned upon request; and (3) are confidential and not to be disclosed to any person other than those to whom they are given by Amphenol Corp. the furnishing of these drawings, specifications, or other data by Amphenol Corp., or to any other person to anyone for any purpose is not to be regarded by implication or otherwise in any manner licensing, granting rights to permitting such holder or any other person to manufacture, use or sell any product, process or design, patented or otherwise, that may in any way be related to or disclosed by said drawings, specifications, or other data. MATERIAL REFERENCE EAR # 6228 CONFIGURATION LEVEL: In Work FINISH DRAWN CLEMENT DATE 12-Dec-14 ENGINEER B.C. GLEISSNER DATE 12-Dec-14 APPROVED B.C. GLEISSNER DATE 18-Dec-14 CAD FILE TITLE Amphenol RF DIE SETS www.amphenolrf.com DRAWING NO. 47-2XXXX SCALE: NTS SHEET 2 OF 2 DWG SIZE REV B A ITEM NO. 47-2XXXX PART NO. 47-2XXXX