RVO VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS FOR AUDIO &KLS7\SH$XGLR8VH&DSDFLWRUV *5((1 &$3 60' (R) )RU DXGLR Audio grade surface mount product with completely new components using synthetic mica paper for the separator. Both quality sense and sound field that could not be realized by the surface mount products are reproducible. )RUKLJKHUJUDGH 592 592 385(&$3 Marking color : Black print (except height : 10mm) White print on a brown sleeve (8x10L,10x10L) Specifications Performance 40 to 85 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) ; V: Rated voltage (V) Item Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 6.3 0.28 10 0.24 16 0.20 25 0.14 (20,120Hz) (20) 35 0.12 50 0.10 (20,120Hz) Rated voltage (V) -25/20 -40/20 Characteristics at high and low temperature Impedance ratio (max.) 6.3 3 8 10 3 5 16 2 4 25 2 3 35 2 3 50 2 3 (120Hz) Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (85) (Applied ripple current) 2000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Shelf life (85) Test time : 1000 hours; other items are the same as those for the endurance. Voltage application treatment Applicable standards JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Outline Drawing Unit : mm Frequency (Hz) 0.40.2 0.3MAX Rated voltage (V) 6.3 to 16 25 to 35 50 (P) (C) D0.5 B0.2 (C) A0.2 Coefficient of Frequency for Rated Ripple Current ( ) : Reference size A 4.3 5.3 6.3 8.4 8.4 10.4 1k 10k100k 1 1 1 1.15 1.25 1.35 1.25 1.40 1.50 Part numbering system (example : 16V470F) RVO L 5.30.2 5.30.2 5.30.2 6.50.3 100.5 100.5 120 16 V 471 M H10 P2 U W L D 4 5 6.3 8 8 10 50 0.80 0.80 0.80 B 4.3 5.3 6.3 8.4 8.4 10.4 C 2.0 2.3 2.7 3.4 3.0 3.3 0.5 0.5 0.5 0.5 0.7 0.7 P 1.0 1.5 2.0 2.3 3.1 4.7 W to 0.8 to 0.8 to 0.8 to 0.8 to 1.1 to 1.1 Soldering conditions are described on page 13. Series code Rated voltage symbol Rated capacitance Capacitance tolerance symbol symbol Casing symbol Taping symbol Casing symbol D55 E55 F55 G68 G10 H10 Land pattern size are described on page 11. The taping specifications are described on page 14. Aluminum Electrolytic Capacitors for Audio Standard Ratings Rated voltage (V) Item Rated capacitance (F) 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 50 6.3 10 16 25 35 Rated ripple current Rated ripple current Rated ripple current Rated ripple current Rated ripple current Rated ripple current Case Case Case Case Case Case (mArms) DxL (mm) DxL (mm) DxL (mm) DxL (mm) DxL (mm) DxL (mm) (mArms) (mArms) (mArms) (mArms) (mArms) 4x5.3 5 4x5.3 6 4x5.3 7 4x5.3 10 4x5.3 15 4x5.3 17 4x5.3 19 4x5.3 18 4x5.3 19 4x5.3 20 5x5.3 26 4x5.3 23 4x5.3 26 5x5.3 32 5x5.3 34 6.3x5.3 44 4x5.3 31 5x5.3 40 5x5.3 44 6.3x5.3 55 6.3x5.3 59 8x6.5 124 5x5.3 44 5x5.3 49 6.3x5.3 63 6.3x5.3 67 8x6.5 124 8x6.5 124 200 5x5.3 53 6.3x5.3 68 6.3x5.3 76 8x6.5 124 8x6.5 124 8x10 366 6.3x5.3 90 6.3x5.3 99 8x6.5 124 8x6.5 137 8x10 200 10x10 8x6.5 149 8x6.5 149 8x10 200 8x10 235 10x10 366 8x6.5 160 8x10 226 8x10 245 10x10 366 8x10 251 10x10 366 10x10 366 10x10 423 (Note) Rated ripple current : 85, 120Hz. CAT.No.2013/2014E 152 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.