CONVERTERS AND INTERFACES
K-LINE
K109UI
K-LINE
DC Current / Voltage Converter
►INPUT:N.1 channel current 0/4..20 mA or voltage 0/1..5,
0/2..10, 0..15/30 Vdc
►OUTPUT: N.1 channel current 0/4..20, 20..4/0 mA or
voltage 0/1..5, 0..10, 10..0 Vdc
►Galvanic isolation at 3-way
►Spring-cage terminal block and/or DIN bus connection
system
►Power bridging terminal - DIN rail bus connector
►Tiny dimensions (102,5 x 93,1 x 6,2 mm)
►Resolution @ 14 bit
►Precision class 0.1%
Converters-analog isolators
TECHNICAL DATA
GENERAL FEATURES
K109PT – PT100 converter
Power supply 19,2…30 Vdc
Filter rejection
Galvanic Isolation
Current output protection
Status indicators
Security output
IP Protection
500 mW
Power supply // input // output at 1500 Vac, digital
Approximately 25 mA
IP 20
Operating temperature -20..+65 °C
Humidity
Dimensions
Weight
Connections
30..90% a +40°C (not condensing)
6,2 x 93,1 x 102,5 mm (w x h x d)
50 g
Plug-in screw clamp terminal blocks, wires up to 2.5 mm
2
Design Terminal housing for mounting on 35 mm DIN 46277
Accuracy DIP Switch0.08% of the f.s. value for mA or 5 V output
0.07% of the f.s. value for 10 V output
-Inputs signal setup
-Output signal setup
Standards EN50081-2
EN50082-2
EN61010-1
EN60742
DIMENSIONS AND INSTALLATION
OUTPUT
Channels N.1
ORDER CODES
- 102.5% of full scale value, in case of over-range
- 105% of full scale value in case of improper functioning
K109UI
K-BUS
K-SUPPLY
Expandable power supply connector
Power Supply module with surge protection
DC Current / Voltage Converter
K109UI – DC Current / Voltage Converter
Cage clamp connection
Expandable connector K-BUSInserting / Extracting module on DIN guide
Input Output
Accessories
INPUT
Hot swapping Yes
Power consumption
A/D Converter 14 bit
50-60 Hz (settable)
Floating point 32 bitProcessing
Power supply
Approvals CE
Input or output out-of-range limiter device triggered
Input saturation
Internal fault
Voltage(max. 50 V) :0..15 V, 0..30 V,
Input impedance: 325 kOhm
0..10 V, 2..10 V, 0..5 V, 1..5 V,
Input Impedance: 110 KOhm
Current (max. 24 V) : 0..20 mA, 4..20 mA,
Input Impedance: 35 Ohm
Voltage: 0..5 Vdc, 1..5 Vdc, 0..10 Vdc and 10..0 Vdc
Lower load resistance: 2 KOhm
Current: 0..20 mA, 4..20 mA, 20..0 mA e 20..4 mA
Higher load resistance: 500Ohm
