SIL10E Series 12Vin s i n g l e o u t p u t DC/DC CONVERTERS E Class Non-isolated 1 NEW Product * * * * * * * 10A Current rating Input voltage range: 10V to 14V Output voltage range: 0.8V to 3.63V Ultra high efficiency: 94% @ 12Vin and 3.3Vout Extremely low internal power dissipation Minimal thermal design concerns Designed in reliability: MTBF of >7 million hours per Telcordia SR-332 * Ideal solution where board space is at a premium or tighter card pitch is required * Industry standard footprint and pin out The SIL10E series are non-isolated DC/DC converters packaged in a single-in-line footprint giving designers a cost effective solution for conversion from a 12V source. The SIL10E offers a range of fixed outputs and one wide trim output unit at an industry leading 10A which allows maximum design flexibility and a pathway for future upgrades. The SIL10E is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface mount technology and automated manufacturing techniques, the SIL10E offers compact size and efficiencies of up to 94%. 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25C unless otherwise stated OUTPUT SPECIFICATIONS Voltage adjustability EMC CHARACTERISTICS Fixed output version 12Vin with wide trim 10% 0.8V to 3.63V 0.4% typ. Electrostatic discharge Conducted immunity Radiated immunity Line regulation 0.2% typ. GENERAL SPECIFICATIONS Load regulation 1.0% max. Setpoint accuracy Efficiency Temperature co-efficient 0.01%/C Insulation voltage Total error band 3.0% typ. Switching frequency Minimum load 0A Overshoot/undershoot None Ripple and noise 0 to 20MHz bandwidth 80mV pk-pk 25mV rms max. Transient response 100mV max. deviation 100s recovery to within 1.0% Remote sense 10% Vo compensation See table Non-isolated Fixed 200kHz typ. Approvals and standards EN60950 UL/cUL60950 Material flammability Dimensions (Vertical model) UL94V-0 (LxWxH) 50.8 x 7.8 x 12.7mm 2.0 x 0.31 x 0.5 inches Weight MTBF 5g (0.18oz) Telcordia 332 7,042,000 hours ENVIRONMENTAL SPECIFICATIONS INPUT SPECIFICATIONS Input voltage range Input current EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 10 to 14VDC No load 70mA Input current (max.) 3.5A max. @ Io max. and Vout = 3.3V Input ripple current 120mA Remote ON/OFF Start-up time Thermal performance (See Note 2) (See Note 1) Operating ambient, temperature Non-operating -40C to +85C -40C to +125C PROTECTION Short-circuit protection Thermal protection Continuous Automatic recovery 35mS International Safety Standard Approvals UL/cUL CAN/CSA 22.2 No. E174104 UL 60950 file No. E174104 TUV Product Service (EN60950) Certificate No. B 03 10 38572 037 CB report and certificate to DE3-51686M1 File Name: SIL10E_12.PDF Rev: 27 Nov 2003 SIL10E Series 12Vin s i n g l e o u t p u t DC/DC CONVERTERS E Class Non-isolated 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product OUTPUT POWER (MAX.) INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT (MIN.) OUTPUT CURRENT (MAX.) EFFICIENCY (TYP.) LINE LOAD MODEL NUMBER (3) 13.2W 10V - 14V 1.2V 0A 10A 84% 0.2% 1.0% SIL10E-12S1V2-V 16.5W 10V - 14V 1.5V 0A 10A 86% 0.2% 1.0% SIL10E-12S1V5-V 19.8W 10V - 14V 1.8V 0A 10A 88% 0.2% 1.0% SIL10E-12S1V8-V 27.5W 10V - 14V 2.5V 0A 10A 91% 0.2% 1.0% SIL10E-12S2V5-V 36.3W 10V - 14V 3.3V 0A 10A 94% 0.2% 1.0% SIL10E-12S3V3-V 36.3W 10V - 14V 0.8V - 3.63V 0A 10A 94% 0.2% 1.0% SIL10E-12W3V3-V Part Number System with Options REGULATION SIL10E-12S3V3-V Product Family SIL = Single Inline Rated Output Current 10 = 10Amps Performance E = Enhanced Performance Mounting Option V = Vertical H = Horizontal Output Voltage 1V2 = 1.2V, 1V5 = 1.5V, 1V8 = 1.8V, 2V5 = 2.5V, 3V3 = 3.3V Type of Output S = Single W = Wide Input Voltage 12 = 10V - 14V Output Voltage Adjustment of the SIL10E-12W3V3 Series The ultra-wide output voltage trim range offers major advantages to users who select the SIL10E-12W3V3. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.8V to 3.63V. When the SIL10E-12W3V3 converter leaves the factory the output has been adjusted to the default voltage of 0.8V Notes 1 The SIL10E features an `Positive Logic' remote ON/OFF operation. If not using the remote ON/OFF pin, leave the pin open (the converter will be on). The remote ON/OFF pin is referenced to ground. The following conditions apply for the SIL10E: Configuration Remote pin open circuit Remote pin pulled low [Von/off <0.8V] Remote pin pulled high [Von/off >1.6V] 2 3 Converter Operation Unit is ON Unit is OFF Unit is ON An `Negative Logic' remote ON/OFF version is also possible with this converter. To order please place the suffix `-R' at the end of the model number, e.g. SIL10E-12S3V3-VR. Full de-rating curves available in both the Long Form Data Sheet and Application Note. For Horizontal mounting option, please consult factory for details. File Name: SIL10E_12.PDF Rev: 27 Nov 2003 SIL10E Series 12Vin s i n g l e o u t p u t DC/DC CONVERTERS E Class Non-isolated 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm SIDE VIEW NEW Product FRONT VIEW 2.000 (50.80) 0.307 (7.80) 0.500 (12.70) 0.220 (5.50) max PCB 0.135 (3.43) 0.635 (16.13) 1 2 3 4 5 1 J1 0.168 (4.26) 2 3 J2 5 6 0.100 (2.54) 1.900 (48.26) 0.050 (1.27) Note: Sense Pin is a customer specified option All dimensions in inches (mm) All tolerance 0.010in (0.25mm) unless otherwise stated J1 PIN CONNECTIONS PIN NUMBER FUNCTION 1 +Vout 2 +Vout 3 Remote Sense (+)* 4 +Vout 5 Ground J2 PIN CONNECTIONS PIN NUMBER FUNCTION 1 Ground 2 +Vin 3 +Vin 4 No Pin 5 Trim 6 Remote ON/OFF *The sense function is customer specified option and comes as standard. Please consult factory for details. Data Sheet (c) Artesyn Technologies(R) 2003 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: Application Note Longform Data Sheet www.artesyn.com File Name: SIL10E_12.PDF Rev: 27 Nov 2003